Effect of sol–gel-based silica buffer layer on the formation of NaA zeolite membrane

The support substrates were modified with sol?Cgel-based silica coating as intermediate buffer layer followed by NaA zeolite seed (prepared hydrothermally at 85?°C for 3?h) coating with 2?wt% aqueous dispersion. The secondary crystallization of NaA zeolite in the silica-seed-coated supports was carried out hydrothermally through crystal growth process at 65?°C for 4 and 8?h (single-stage each), (6?+?4) and (6?+?6)?h (double-stage each), and (6?+?4?+?2) and (6?+?4?+?4)?h (triple-stage each). The crystallization behaviours of the prepared NaA membranes were studied by X-ray diffraction, and the microstructures of the same films were observed by field emission scanning electron microscope. The efficiency of the membranes was tested with gas permeation study. The double-stage secondary crystallization at 65?°C for (6?+?4)?h showed highly interlocked NaA grains in the membrane and it rendered the permeance values of 3.7?×?10^?8?mol?m^?2?s^?1?Pa^?1 and 15.9?×?10^?8 for single gas, nitrogen (N₂) and hydrogen (H₂) respectively with the ideal selectivity of 4.3.     

Textured tape substrates made of ternary alloys based on Cu–40%Ni–Me constantan for epitaxial deposition of buffer and superconducting layers

The structure was studied and the texture formation process was investigated in tapes made of Cu–Ni–Me ternary alloys (Me = Fe, Cr, V, or Mn) during cold deformation by rolling to a degree of ～99% with subsequent recrystallization annealing. It was shown that it is generally possible to create a perfect cubic texture in a thin ribbon made of ternary alloys based on copper and nickel to which a period 4 d-element (iron, chromium, or vanadium) was added. This makes these tapes promising as substrates in the technology for producing second-generation high-temperature superconductor tapes. The optimal annealing conditions were determined, under which, in the studied alloys, a perfect biaxial near-single-crystalline texture can be obtained with a content of cubic grains {001}〈100〉 ± 10° on the surface of the textured ribbon of above 99%.     

pH buffer assessment and Pitzer��s equations

Traceable measurement of the quantity pH in media outside the limits of the recent IUPAC recommendation requires an alternative to the Bates?CGuggenheim convention. The Pitzer??s approach to ion interactions is widely appraised and offers a suitable approach to the estimation of single-ion activity coefficients. For this purpose, the underlying electrolyte data need to be consistent and the uncertainty in existing Pitzer??s data needs to be assessed. Such an assessment is attempted in this study for pH in potassium acetate buffer medium. The re-evaluation of Pitzer??s data from potassium nitrate data revealed inconsistencies and wide uncertainty margins. The uncertainty contribution from binary Pitzer??s parameters to an assessment of pH in seawater resulted in an uncertainty in pH of about 0.03 (95% confidence interval). This contribution has to be taken into account in the overall uncertainty budget. Lack of appropriate data for other pH buffer systems (e.g., phosphate buffers) is noted.     

Study on polymerization and structure of polydiphenylamine

The electrochemical oxidation of diphenylamine in acetonitrile produces an adherent uniform polymer film which exhibits mutiple colour variation(yellow-green-blue) in a wide range of potential scan. The polymerization mechanism and the structure of the polymer were studied by cyclic voltammetry, FT-IR and in situ ESR. The results indicate that the electrochemical polymerization of diphenylamine belongs to a cationic radical polymerization process. During electrolysis, only oligomers were initialy produced, then polymer film was formed on the electrode surface. The electropolymerization performs via the 4,4' C-C phenyl-phenyl coupling mechanism.     

Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel Catalysts

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters C-γ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4     

Structures of silylenoids and effects of metallic and haloid atoms on their stability

The structural characteristics of silylenoids, H2SiMX, where M = Li or Na and X = F or Cl, have been studied by ab initio calculations. H2SiMX can be represented as adducts of silylene H2Si with alkali metal halogenides, MX. The associative energies at different calculational levels of various structures of H2SiMX are given. Effects of metallic and haloid atoms on the stability of various structures of H2SiMX are also discussed in this paper.     

Effect of Processing and Aging on Particle Size of Explosives

Influence of such processes as molding powder production, pel-lets pressing and aging under different condit/ons on particle size of TATB ( 1,3,S-trlamino-2,4,6-trinltrobenzene ) and HMX (cyclotetramethylenetetranitramine) was experimentally studied. The results showed that parflele size of these explosives was greatly changed before and airier moldinu powder produc-tion, but for different size grade of explosive this change was not the same; pressing process had also great effect on explosive particle size, but before and after ageing process explosive par-tide size did not change seriously.     

Crystallization of Mg(Fe0.8Ga0.2)2O4-δ films on silicon with SiO2 and TiO2 buffer layers

The results of analysis of conceivable interactions between film and substrate materials during crystallization of Mg(Fe_0.8Ga_0.2)₂O_4-δ films with SiO₂ and TiO₂ buffer layers on silicon are reported. The calculated data are compared with the physicochemical parameters of Mg(Fe_0.8Ga_0.2)₂O_4-δ/Si, Mg(Fe_0.8Ga_0.2)₂O_4-δ/TiO₂/Si, and Mg(Fe_0.8Ga_0.2)₂O_4-δ/SiO₂/Si film heterostructures.     

Catalytic dehydration of isopropanol on neodymium-Y and X-zeolites and the effect of γ-irradiation

Four different samples of NdX, NdY, NdNH₄X and NdNH₄Y-zeolites were prepared by ionexchange methods. DTA and XRD analyses have been carried out for the samples. The thermally activated zeolites were irradiated by 1.5 and 10.0 Mrad -rays. The catalytic activities of these samples were tested in dehydration of isopropanol. The results of DTA indicated that all samples showed endothermic peaks at about 215 °C related to the release of physically adsorbed water and exothermic peaks at 850–950 °C indicating the collapses of the zeolite. The X-ray analysis revealed that the exchange of sodium by neodymium or ammonium followed by neodymium ions did not change the crystal structure but some decrease in the crystallinity was observed. The catalytic activities of these zeolites were measured in dehydration of isopropanol as a function of temperature. It was found that the activity of the prepared Nd-zeolites depends on the crystallinity of zeolites and on the condensation products formed on catalyst surface. However, the irradiated samples exhibited higher catalytic activities in isopropanol conversion than the unirradiated ones. The observed higher activity for irradiated samples was attributed to the increase of the number of acidic centers responsible for dehydration of alcohols. These centers were formed as a result of the formation of tricoordinate aluminium atoms in -irradiated zeolites.     

Interactions and influence of α-cyclodextrin on the aggregation and interfacial properties of mixtures of nonionic and zwitterionic surfactants

The interactions of α-cyclodextrin (α-CD) with the nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) and the zwitterionic surfactant dimethyldodecylammoniopropanesulfonate (DPS) in their mixed system have been studied using interfacial tension, fluorescence, and nuclear magnetic resonance measurements. From the plots of interfacial tension vs. log of total surfactant concentration, we have obtained values of the surface excess of surfactant, the critical micellar concentration (cmc), the standard free energy of micelle formation, and association constant of surfactant/α-CD inclusion complexes (assuming a 1:1 stoichiometry). A comparison of the K _a values obtained for the interaction between α-CD and DPS and Mega-10, respectively, shows that DPS interacts stronger with α-CD than Mega-10. The experimental mixed cmc was analyzed by the pseudophase separation model and regular solution theory for the evaluation of ideality or nonideality of the mixed micelle formation. The interaction parameters in the mixed micelle and the micelle composition at different mole fractions of DPS were also computed. The fluorescence anisotropy (r) values of rhodamine B decreases with the increase of α-CD concentrations.     

Investigation of metal–buffer interactions using isothermal titration calorimetry

Isothermal titration calorimetry (ITC) and potentiometric titration (PT) methods were used to study the interactions of cobalt(II) and nickel(II) ions with buffer substances 2-(N-morpholino)ethanesulfonic acid (Mes), dimethylarsenic acid (Caco), and piperazine-N,N′-bis(2-ethanesulfonic acid) (Pipes). Based on the results of PT data, the stability constants were calculated for the metal–buffer complexes (T = 298.15 K, ionic strength I = 100 mM NaClO₄). Furthermore, calorimetric measurements (ITC) were run in 100 mM Mes, Caco, and Pipes solutions with pH 6, at 298.15 K. The enthalpies (ΔH) of the metal–buffer complexation reactions were calculated indirectly by displacement titration using nitrilotriacetic acid (H₃NTA) as a strong-binding, competitive ligand. Finally, to verify obtained results, the number of protons released by H₃NTA due to complexation of the cobalt(II) and nickel(II) ions was determined from calorimetric data and compared with results of calculations.     

Studies on Synthesis of a Cycloheptapeptide and Effects of Different Metal Ions on the Cyclization

ＩｎｔｒｏｄｕｃｔｉｏｎＣｙｃｌｉｃｐｅｐｔｉｄｅｓ ,ｗｈｉｃｈａｒｅｃｏｎｓｔｒａｉｎｅｄｃｏｎｆｏｒｍａ ｔｉｏｎａｌｌｙａｎｄｍｏｒｅｒｅｓｉｓｔａｎｔｔｏｐｒｏｔｅａｓｅｄｉｇｅｓｔｉｏｎｓｔｈａｎｔｈｅｉｒｌｉｎｅａｒｐｒｅｃｕｒｓｏｒｓ ,ｈａｖｅｂｅｅｎｏｆｇｒｅａｔｉｎｔｅｒｅｓｔａｓｓｙｎｔｈｅｔｉｃｔａｒｇｅｔｓｂｏｔｈａｓｐｏｔｅｎｔｉａｌｄｒｕｇｌｅａｄｓａｎｄａｓｍｏｄｅｌｓｆｏｒｃｏｎ ｆｏｒｍａｔｉｏｎａｌａｎａｌｙｓｉｓ .1 4 Ｃｕｒｒｅｎｔｍｅｔｈｏｄｓｆｏｒｓｙｎｔ…     

Qualitatively graph-theoretical study on stability and formation of fullerenes and nanotubes

Kekule structures of different carbon species have been determined. On the basis of Kekule structure and C-C bond counts as well as the surface curvature, stability of diverse carbon species, driving force for curling of graphite fragments and formation of fullerenes and nanotubes, have been discussed. Curling of graphite flat fragments, end-capping of nanotubes, and closure of curved structures are driven by a tremendous increase in Kekule structures as terminal carbon atoms couple their dangling bonds into C-C o bonds. The increasing tendency becomes particularly striking for large cages and nanotubes. Resonance among numerous Kekule structures will stabilize the curved structure and dominate formation of closed carbon species. For similar carbon cages with comparable Kekule structure counts in magnitude, the surface curvature of carbon cages, as a measure for the strain energy, also plays an important role in determining their most stable forms.     

Structure and characteristics of copolyamides based on ε-caprolactam and diisocyanates

The main supramolecular characteristics and the processing and service characteristics of copolyamides based on -caprolactam and hexamethylene diisocyanate were studied. The relation between the comonomer composition and supramolecular structure of copolymers was established.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 11, 2004, pp. 1891–1894.Original Russian Text Copyright © 2004 by Galibeev, Barnyagina, Kochnev, Arkhireev, Galimov.     

Effect of Oxygen and Bacteria on the Property of Polymer Gel

The viscosity property of Cr~(3 ),Al~(3 ),and compound ion cross-linked polymer gel solution in the anaerobic and aerobic environment was investigated aiming at meeting the practical demand of the oil field.The viscosity reserving effect after adding the biocide and the gelation in the anaerobic and aerobic environments was also studied in the paper.The results indicate that the viscosity of the cross-linked polymer gel solution caused by the water produced in aerobic environment is higher than that in anaerobic environment,and that the viscosity value of the cross-linked polymer gel solutions after adding biocides has improved to some extent and polymer gel has gelated well in anaerobic environment.     

Status of study on biological and toxicological effects of nanoscale materials

1 Introduction Undoubtedly, nanotechnology has already becomethe representative of leading new technologies in the21st century. It is expected not only to reform the tra-ditionally industrial techniques in the near future, suchas reducing the material con…     

Influence of gelator structures on formation and stability of supramolecular hydrogels

A supramolecular hydrogel(defined as G1) formed from 1,2,4,5-benzene tetracarboxylic acid (BTCA) and 2-amino-3- hydroxypyridine possessed higher T_(gel) than that of another hydrogel(defined as G2) formed from BTCA and 3-hydroxypyridine. Based on the analysis of their xerogels by ~1H NMR,IR and XRD,the higher stability of G1 was attributed to the formation of stronger hydrogen binding enhanced by the ortho amino group of 2-amino-3-hydroxypyridine.     

Effect of Irradiation on Crystallinity and Mechanical Properties of Ultrahigh-Molecular-Weight Polyethylene

Ultrahigh-molecular-weight polyethylene(UtlMWPE) has been irradiated(0-40 Mrad) with a Co~(60) source at room temperature under vacuum. Theircrystallinity has been investigated by DSC and SAXS A significant increaseof heat of fusion can be seen at low irradiation doses, which is attributed tocrystallization caused by chain scission during the process of irradiation.It is also observed that thickness of lamellae changes with irradiation dose.Young's modulus has been improved significantly after irradiation at lowdoses.     

Effects of binders and graphite on the sensitivity of ε-HNIW

In order to optimize formulations of PBX based on Hexanitrohexaazaisowurtzitane (HNIW) and meet the application in mixed explosive, the mold powder of HNIW coated by varied binders was obtained by aqueous suspension technology. Several particle sizes of graphite were added as additive with a 0.5 % mass ratio. The experiment results showed that fluorine resin (FPM) was better than polyurethane and cis-butadiene rubber when the mass percentage of binders was fixed at 4 %. The characteristic height of HNIW/FPM (96/4) mold powder was at 28 cm (2.5 kg hammer), while that of the neat HNIW was at 15 cm merely, and the friction explosion probability fell from 100 to 70 %. The addition of flake graphite with proper grain size would reduce the mechanical sensitivity of HNIW and improved the fluxion property of HNIW-based mold powders. The thermal stability characteristic of HNIW FPM (96/4) and HNIW/FPM/G (96/4/0.5) were studied by thermogravimetric analysis (TG) at 10 °C min^?1, the peak decomposition temperatures were at 251 and 250 °C, which were closed to that of neat HNIW(249 °C) and also identified superior thermal stability of compound.     

Theoretical Studies on Adsorption Sites and States of O and N on Ni（311）

The adsorption of O and N atoms on the Ni(311) surface was investigated by the 5-parameter Morse potential(5-MP) method in detail. For the O-Ni(311) system, there are three surface adsorption states and thefcc-3-fold site is metastable; the frequency of 75 meV[67 meV in high resolution electron energy loss spectroscopy(HREELS) experiment] is attributed to the vibration at the hcp-3-fold site. For the N-Ni(311) system, however, there are only two surface adsorption states(no surface adsorption state was calculated at fcc-3-fold site). In addition, subsurface states were predicted and all critical characteris-tics were obtained for the two systems.