A thermodynamic study on the binding of mercury and silver ions to urease

In this article, a thermodynamic study on the interaction of Jack bean urease, JBU, with \textHg ²⁺ {\text{Hg}}^{ 2+ } and \textAg ⁺ {\text{Ag}}^{ + } ions were studied by isothermal titration calorimetry (ITC) at 300 and 310 K in 30 mM Tris buffer solution, pH 7.0. The heats of \textJBU + \textHg ²⁺ {\text{JBU}} + {\text{Hg}}^{ 2+ } and \textJBU + \textAg ⁺ {\text{JBU}} + {\text{Ag}}^{ + } interactions are reported and analyzed in terms of the extended solvation model. It was indicated that there are a set of 12 identical and non-cooperative sites for \textHg ²⁺ {\text{Hg}}^{ 2+ } and \textAg ⁺ {\text{Ag}}^{ + } ions. The binding of \textHg ²⁺ {\text{Hg}}^{ 2+ } and \textAg ⁺ {\text{Ag}}^{ + } ions with JBU are exothermic with association equilibrium constants of 5415.65 and 4368.15 for \textAg ⁺ {\text{Ag}}^{ + } and 2389 and 2087 M ^{- 1} M^{ - 1} for \textHg ²⁺ {\text{Hg}}^{ 2+ } at 300 and 310 K, respectively.     

γ-Ray synthesis of starch-stabilized silver nanoparticles with antibacterial activities

Silver nanoparticles (Ag NPs) are fabricated through γ-irradiation reduction of silver ions in aqueous starch solutions. The UV–vis analyses show smaller sizes of Ag NPs produced, with higher yields, as the irradiation doses and/or Ag⁺ concentrations are increased. Higher concentrations of starch enhance the yields of Ag NPs, with no significant effects on their size. The most economical Ag NPs are produced at 5 kGy γ-irradiation of a 2×10⁻³ M solution of AgNO₃ containing 0.5% starch. They show a relatively narrow size distribution, indicated by TEM and its corresponding size distribution histogram. The XRD pattern confirms the face-centered cubic (fcc) Ag NPs embedded in starch molecules. Interactions between these nanoparticle surfaces and starch oxygen atoms are indicated by FT–IR. Antibacterial activities of Ag NPs against Escherichia coli appear dependent on the γ-ray doses applied.     

Preparation of Ag nanocrystals embedded silicate glass by field-assisted diffusion and its properties of optical absorption

Ag nanocrystals embedded silicate glass was successfully prepared by solid-state field-assisted diffusion, combined with post-annealing process. The changes of glass structure, the chemical states of Ag and O species, the microstructures of Ag nanocrystals, as well as the properties of optical absorption were studied for the as-diffused and post-annealed samples. The result showed that after the field-assisted diffusion process, some Ag⁺ ions replaced the alkaline ions in the glass matrix. Meanwhile, other Ag⁺ ions were reduced to Ag⁰ atoms occupying the interspaces of the network and Ag⁰ atoms clusters with small size were formed. This caused the relaxation of the glass network and the deceasing of force constant for Si–O linkage. After post-annealing process, bigger size of Ag nanoparticles were formed, which caused the peak corresponding to the surface plasmon resonance (SPR) observed.     

Mo3S132− Intercalated Layered Double Hydroxide: Highly Selective Removal of Heavy Metals and Simultaneous Reduction of Ag+ Ions to Metallic Ag0 Ribbons

We demonstrate a new material by intercalating Mo₃S₁₃^2? into Mg/Al layered double hydroxide (abbr. Mo₃S₁₃-LDH), exhibiting excellent capture capability for toxic Hg²⁺ and noble metal silver (Ag). The as-prepared Mo₃S₁₃-LDH displays ultra-high selectivity of Ag⁺, Hg²⁺ and Cu²⁺ in the presence of various competitive ions, with the order of Ag⁺>Hg²⁺>Cu²⁺>Pb²⁺≥Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺. For Ag⁺ and Hg²⁺, extremely fast adsorption rates (≈90 % within 10 min, >99 % in 1 h) are observed. Much high selectivity is present for Ag⁺ and Cu²⁺, especially for trace amounts of Ag⁺ (≈1 ppm), achieving a large separation factor (SF_Ag/Cu) of ≈8000 at the large Cu/Ag ratio of 520. The overwhelming adsorption capacities for Ag⁺ (q_m^Ag=1073 mg g^?1) and Hg²⁺ (q_m^Hg=594 mg g^?1) place the Mo₃S₁₃-LDH at the top of performing sorbent materials. Most importantly, Mo₃S₁₃-LDH captures Ag⁺ via two paths: a) formation of Ag₂S due to Ag-S complexation and precipitation, and b) reduction of Ag⁺ to metallic silver (Ag⁰). The Mo₃S₁₃-LDH is a promising material to extract low-grade silver from copper-rich minerals and trap highly toxic Hg²⁺ from polluted water.     

Electro-chromatography in the separation of ions : Part III. Separation of silver group metals

The migration sequences of silver group ions Ag⁺, Hg₂⁺², Pb⁺²and Ti⁺ have been studied in a number of complex-forming electrolytes. Based on the migration sequences, the ions in a mixture can be separated into distinct zones using a decinormal solution of sodium chloride, potassium chloride or potassium cyanide as the electrolyte. The sequence is Hg — Ag— Pb—Ti, while in KCN at pH 7.0 the sequence becomes Ag—Hg—Pb—Ti.     

Determination of Hg on poly(vinylferrocenium) (PVF)-modified platinum electrode

A new surface based on poly(vinylferrocenium) (PVF⁺)-modified platinum electrode was developed for determination of Hg²⁺ ions in aqueous solutions. The polymer was electrodeposited on platinum electrode by constant potential electrolysis as PVF⁺ClO₄⁻. Cl⁻ ions were then attached to the polymer matrix by anion exchange and the modified electrode was dipped into Hg²⁺ solution. Hg²⁺ was preconcentrated at the polymer matrix by adsorption and also complexation reaction with Cl⁻. Detection of Hg²⁺ was carried out by differential pulse anodic stripping voltammetry (DPASV) after reduction of Hg²⁺. Mercury ions as low as 5 × 10⁻¹⁰ M could be detected with the prepared electrode and the relative standard deviation was calculated as 6.35% at 1 × 10⁻⁶ M concentration (n = 6). Interferences of Ag⁺, Pb²⁺ and Fe³⁺ ions were also studied at two different concentration ratios with respect to Hg²⁺. The developed electrode was applied to the determination of Hg²⁺ in water samples.     

Green synthesis and antibacterial effects of aqueous colloidal solutions of silver nanoparticles using clove eugenol

Silver nanoparticles were synthesized using clove extract (CE). Scanning transmission electron microscopy (STEM) revealed the morphology of the metallic Ag nanoparticles obtained via the clove extract synthesis (Ag NPs‐CE), which had a uniform distribution and average sizes varying from 10 nm to 100 nm. Fourier transform infra‐red (FTIR) spectroscopy showed that clove eugenol acts as a capping and reducing agent being adsorbed on the surface of Ag NPs‐CE, enabling their reduction from Ag⁺ and preventing their agglomeration. Formation of the Ag⁰ structure is also confirmed in the FTIR spectrum by the presence in the Ag NPs‐CE sample of the –C=O and –C=C vibrations at wavenumbers 1600 and 2915 cm^‐1, respectively. Antibacterial and antifungal tests using three strains of bacteria and one fungi strain showed that the Ag NPs‐CE performed better compared to pure clove extract (CE) sample.     

Determination of mercury(II) by surface-enhanced Raman scattering spectroscopy based on thiol-functionalized silver nanoparticles

Silver nanoparticles (Ag NPs) modified with sodium 2-mercaptoethanesulfonate (mesna) exhibit strong surface-enhanced Raman scattering (SERS). Their specific and strong interaction with heavy metal ions led to a label-free assay for Hg(II). The covalent bond formed between mercury and sulfur is stronger than the one between silver and sulfur and thus prevents the adsorption of mesna on the surface of Ag NPs. This results in a decrease of the intensity of SERS in the presence of Hg(II) ions. The Raman peak at 795?cm^?1 can be used for quantification. The effect of the concentration of mesna, the concentration of sodium chloride, incubation time and pH value on SERS were optimized. Under the optimal conditions, the intensity of SERS decreases with increasing concentration of Hg(II). The decrease is linear in the 0.01 and 2?μmol L^?1 concentration range, with a correlation coefficient (R²) of 0.996 and detection limit (S/N?=?3) is 0.0024?μmol L^?1. The method was successfully applied to the determination of the Hg(II) in spiked water samples.

Selective removal of heavy metal ions using sol-gel immobilized and SPE-coated thiacrown ethers

Sorbent materials based on three thiacrown ethers, 1,4,7,10-tetrathiacyclododecane (12S4), 1,4,7,10,13-pentathiacyclopentadecane (15S5) and 1,4,7,10.13,16-hexathiacyclooctadecane (18S6) were prepared either by immobilizing the ligands into sol-gel (SG) matrix or coating on commercial solid phase extraction (SPE) column. SG sorbents were characterized by FT-IR, energy dispersive X-ray microanalysis (EDX) and thermogravimetric analysis/derivative thermogravimetric analysis (TGA/DTG). A marked thermal stability of the ligands when immobilized in sol-gel matrix was noted. The competitive sorption characteristics of a mixture of eleven metal ions (Mg²⁺, Zn²⁺, Cd²⁺, Co²⁺, Mn²⁺, Ca²⁺, Cu²⁺, Ni²⁺, Ag⁺, V⁴⁺, Hg²⁺) using: (i) batch method with ligands trapped in SG matrices, and (ii) off-line SPE column containing coated ligands were studied using ICP-MS. The extraction of metals were optimized for key parameters such as pH, contact time/flow rate, particle size (for SG sorbents) and ligand concentration. Under the optimized conditions, all the immobilized thiacrown ethers exhibited highest selectivity toward Ag⁺, with lesser responses to Hg²⁺ while the extraction of other metal ions were negligible. Among the SG sorbents, 18S6-SG offer the highest capacity and the best selectivity over Hg²⁺. However, for practical applications such as for selective isolation and preconcentration of Ag⁺, the SPE type especially based on 18S6 is preferred as analysis time and recoveries are favorable. The sorbents can be repeatedly used three times as there was no significant deterioration in the metal uptake (%E > 90%) or interference from other metal ions. The optimized procedures were successfully applied for the separation and preconcentration of traces Ag⁺ in different water samples.     

Kinetics of electrochemical reactions on the Ag(Hg)/Ag4RbI5 interface

The electrochemical behaviour of the Ag(Hg)/Ag₄RbI₅ interface is investigated by a potentiostatic pulse method. It is found that the rate-determining step of the electrode reaction is electron transfer with an exchange current density of 68 mA cm^–2 and a transfer coefficient of approximately 0.45. The order of the electrochemical reaction for silver oxidation is estimated from polarization investigations of silver amalgam in various concentrations. From this it is deduced that the mercury is ionized and is implanted in the electrolyte together with silver under anodic polarization: 15Ag+85Hg–100e^–→15Ag⁺+85Hg⁺. From comparison of the electrochemical behaviour of the Ag(Hg)/Ag₄RbI₅ and Ag/Ag₄RbI₅ interfaces it is concluded that the rate of anodic silver dissolution on the Ag/Ag₄RbI₅ interface is limited by crystallization effects. Electronic Publication     

Development of silver/gold nanocages onto indium tin oxide glass as a reagentless plasmonic mercury sensor

We demonstrate the utilization of silver/gold nanocages (Ag/Au NCs) deposited onto transparent indium tin oxide (ITO) film glass as the basis of a reagentless, simple and inexpensive mercury probe. The localized surface plasmon resonance (LSPR) peak wavelength was located at ∼800 nm. By utilizing the redox reaction between Hg²⁺ ions and Ag atoms that existed in Ag/Au NCs, the LSPR peak of Ag/Au NCs was blue-shifted. Thus, we develop an optical sensing probe for the detection of Hg²⁺ ions. The LSPR peak changes were lineally proportional to the concentration of Hg²⁺ ions over the range from 10 ppb to 0.5 ppm. The detection limit was ∼5 ppb. This plasmonic probe shows good selectivity and high sensitivity. The proposed optical probe is successfully applied to the sensing of Hg²⁺ in real samples.     

A Bis‐Oxime Derivative of Diaza‐18‐Crown‐6 as an Ionophore for Silver Ion

A new pendant‐arm derivative of diaza‐18‐crown‐6, containing two oxime donor groups, has been synthesized and incorporated into a polyvinyl chloride (PVC) membrane ion‐selective electrode. The electrode shows selectivity for Ag⁺ ion, with a near Nernstian response. Pb²⁺, Cu²⁺, Hg²⁺, and Tl⁺ are major interfering ions, with Cd²⁺ having minor interference. The electrode shows no potentiometric response for the ions Mg²⁺, Al³⁺, K⁺, Ca²⁺, Ni²⁺, Fe³⁺, and La³⁺, and is responsive to H⁺ at pH<6.     

Au/Ag2S dimeric nanostructures for highly specific plasmonic sensing of mercury(Ⅱ)

Although many plasmonic nanosenosrs have been established for the detection of mercury(Ⅱ)(Hg²⁺),few of them is feasible for analyzing natural samples with very complex matrices because of insufficient method selectivity.To address this challenge,we propose an epitaxial and lattice-mismatch approach to the synthesis of a unique Au/Ag₂S dimeric nanostructure,which consists of an Au segment with excellent plasmonic characteristics,and a highly stable Ag₂S portion wi...     

Cytidine-stabilized gold nanocluster as a fluorescence turn-on and turn-off probe for dual functional detection of Ag and Hg

In this study, we have developed a label-free, dual functional detection strategy for highly selective and sensitive determination of aqueous Ag⁺ and Hg²⁺ by using cytidine stabilized Au NCs and AuAg NCs as fluorescent turn-on and turn off probes, respectively. The Au NCs and AuAg NCs showed a remarkably rapid response and high selectivity for Ag⁺ and Hg²⁺ over other metal ions, and relevant detection limit of Ag⁺ and Hg²⁺ is ca. 10 nM and 30 nM, respectively. Importantly, the fluorescence enhanced Au NCs by doping Ag⁺ can be conveniently reusable for the detection of Hg²⁺ based on the corresponding fluorescence quenching. The sensing mechanism was based on the high-affinity metallophilic Hg²⁺–Ag⁺ interaction, which effectively quenched the fluorescence of AuAg NCs. Furthermore, these fluorescent nanoprobes could be readily applied to Ag⁺ and Hg²⁺ detection in environmental water samples, indicating their possibility to be utilized as a convenient, dual functional, rapid response, and label-free fluorescence sensor for related environmental and health monitoring.     

铜转运蛋白C端金属结合域与Ag+及Hg2+的相互作用

铜转运蛋白(CTR1)不仅参与铜的细胞摄取,而且在其它重金属离子的摄取过程中也发挥重要作用. 本文采用紫外-可见(UV-Vis)光谱,核磁共振(NMR)和质谱(MS)的方法,研究了人源CTR1 (hCTR1)的C端金属结合域(C8)与Ag⁺和Hg²⁺的相互作用. 研究表明,Ag⁺和Hg²⁺都能与C8结合,但二者与C8的结合机制明显不同. 每个C8分子可以结合两个Ag⁺离子,但一个Hg²⁺却可以与两个C8形成桥联. 此外,Ag⁺离子与C8的配位是一个中等速度的交换过程,而Hg²⁺离子则为快速交换过程. C8的半胱氨酸残基是两种离子的重要结合位点,同时组氨酸残基也参与两种金属离子的配位,其中Ag⁺优先结合组氨酸,而Hg²⁺则对半胱氨酸的结合具有显著的优势. 虽然HCH基序对C8 与金属配位至关重要,一些远端的其它氨基酸也可以参与C8 与银离子的配位,这可能与CTR1 在摄取Ag⁺过程中的金属转移机制相关. 这些结果为理解hCTR1 蛋白摄取重金属离子的作用机制提供了必要的信息.     

Electrochemical metal-ion sensor based on a cobalt phthalocyanine complex captured in Nafion® on a glassy carbon electrode

This article describes an electrochemical metal-ion sensor based on a cobalt phthalocyanine (CoPc) complex and determination of its sensor activity for some transition metal ions. Ag⁺ and Hg²⁺, among several transition metal ions, coordinate to the sulfur donors of CoPc and alter the electrochemical responses of CoPc in solution, indicating possible application of the complex as Ag⁺ and Hg²⁺ sensor. For practical application, CoPc was encapsulated into a polymeric cation exchange membrane, Nafion, on a glassy carbon electrode and used as an electrochemical coordination element. This composite electrode was potentiometrically optimized and potentiometrically and amperometrically characterized as transition metal-ion sensors with respect to reproducibility, repeatability, stability, selectivity, linear concentration range, and sensitivity. A µmol?dm^?3 sensitivity of the CoPc-based sensor indicates its possible practical application for the determination of Ag⁺ and Hg⁺² in waste water samples.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Catalytic gold nanoparticles for fluorescent detection of mercury(II) and lead(II) ions

In this study, we developed a fluorescence assay for the highly sensitive and selective detection of Hg²⁺ and Pb²⁺ ions using a gold nanoparticle (Au NP)-based probe. The Hg–Au and Pb–Au alloys that formed on the Au NP surfaces allowed the Au NPs to exhibit peroxidase-mimicking catalytic activity in the H₂O₂-mediated oxidation of Amplex UltraRed (AUR). The fluorescence of the AUR oxidation product increased upon increasing the concentration of either Hg²⁺ or Pb²⁺ ions. By controlling the pH values of 5 mM tris–acetate buffers at 7.0 and 9.0, this H₂O₂–AUR–Au NP probe detected Hg²⁺ and Pb²⁺ ions, respectively, both with limits of detection (signal-to-noise ratio: 3) of 4.0 nM. The fluorescence intensity of the AUR oxidation product was proportional to the concentrations of Hg²⁺ and Pb²⁺ ions over ranges 0.05–1 μM (R² = 0.993) and 0.05–5 μM (R² = 0.996), respectively. The H₂O₂–AUR–Au NP probe was highly selective for Hg²⁺ (>100-fold) and Pb²⁺ (>300-fold) ions in the presence of other tested metal ions. We validated the practicality of this simple, selective, and sensitive H₂O₂–AUR–Au NP probe through determination of the concentrations of Hg²⁺ and Pb²⁺ ions in a lake water sample and of Pb²⁺ ions in a blood sample. To the best of our knowledge, this system is the first example of Au NPs being used as enzyme-mimics for the fluorescence detection of Hg²⁺ and Pb²⁺ ions.     

High Sensibility of Quantum Dots to Metal Ions Inspired by Hydroxyapatite Microbeads

An approach for the sensitive and selective determination of Ag⁺, Cu²⁺ and Hg²⁺ ions was developed based on the fluorescence quenching of mercaptopropionic acid (MPA) capped CdTe quantum dots in the existence of hydroxyapatite (HAP) nanoribbon spherulites. Among various metal ions investigated, it was found that the fluorescence of CdTe QDs was only sensitive to Ag⁺, Cu²⁺ and Hg²⁺ ions. The addition of HAP into the CdTe system could bring forward a sensitivity improvement of about 1 to 2 orders of magnitude in the detection of Ag⁺ and Cu²⁺ compared with the plain CdTe system without the existence of HAP; while there was no sensitization effect for Hg²⁺. Under optimal conditions, the detection limits for Ag⁺, Cu²⁺ and Hg²⁺ were 20, 56 and 3.0 nmol·L^?1, respectively, and the linear ranges were 0.02–50, 0.056–54 and 0.003–2.4 µmol·L^?1, respectively. Mechanisms of both QDs fluorescence quenching by metal ions and the sensitization effect by HAP were also discussed.