Synthesis and optical properties of π-conjugated polymers and oligomers bearing hexaphenylbenzene and tetraphenyl ethene units

π-Conjugated polymers (CPs) and oligomers (COs) bearing hexaphenylbenzene (HPB) and tetraphenyl ethene (TPE) units were synthesized by Sonogashira and Suzuki–Miyaura coupling reactions. The optical properties of the CPs and COs were investigated by UV–vis, photoluminescence (PL), and fluorescence lifetime (τ) measurements. The PL intensities of the solutions of the CPs and COs synthesized by Sonogashira coupling were reduced upon addition of poor solvent like water, which is attributed to aggregation-caused quenching. In contrast, the CP and COs bearing the TPE unit synthesized by Suzuki–Miyaura coupling exhibited aggregation-induced emission enhancement in solution. This difference in fluorescence behavior is discussed herein in terms of the molecular sizes, conformations in solution, and τ values of the CPs and COs.     

Synthesis and physical properties of π-conjugated metallacycle polymers of cobalt and ruthenium

Recent studies on two types of π-conjugated metallacylce polymers are reviewed. Reaction of CpCo(PPh₃)₂ with conjugated diacetylenes afford poly(arylene cobaltacyclopentadienylene) and that of CpRuBr(cod) does poly(arylene ruthenacyclopentrienylene)s in ambient conditions. Regioselectivity of the former metallacycling reacion is not perfect (at most 80% of the 2,5-diaryl selectivity) but that of the latter is satisfactory (∼100% of the 2,5-diaryl selectivity) for the formation of π-conjugated structure. Electrochemical oxidation of the cobaltacyclopentadiene polymer and reduction of the ruthenacycle polymer occur facilely and quasi-reversibly by the contribution of metal d-orbitals. Physical properties in undoped (neutral) and doped (charged) sates show the behavior of electronic band structure derived from the organic π-conjugated main chain strongly coupled with the metal d-orbitals. This affords, for example, photoconductivity in the neutral form of the cobaltacylopentadiene polymer and ferromagnetic interaction in the reduced form of the ruthenacyclopentatriene polymer.     

Synthesis, structure, and properties of extended π-conjugated systems bearing sterically crowded triarylphosphines

The sterically crowded triarylphosphines bearing formyl and benzoyl groups were synthesized and characterized by X-ray crystallography. The benzoyl derivative was converted to the p-quinomethane conjugated with the triarylphosphine. The McMurry coupling of the formyl derivative afforded the diarylethene bearing the two sterically-crowded-triarylphosphine moieties. The cyclic voltammograms of these compounds show reversible redox waves corresponding to the oxidation to the radical cations of the triarylphosphines and irreversible or quasi-reversible waves corresponding to the reduction of the acceptor moieties. The electronic and the fluorescence spectra of these π-conjugated systems, especially push-pull substituted derivatives, exhibit bathochromic shift typical of the extended π-conjugated systems especially in the polar solvent, and the large Stokes shift typical of the crowded triarylphosphines is enhanced by conjugation with the acceptor moiety.     

Reviewing extrapolation procedures of the electronic properties on the π-conjugated polymer limit

In this article, the extrapolation procedures of π-π* electronic transition energy on π-conjugated oligomers are reexamined. Different models, including the simplest coupled oscillator, the free electron, the Hückel approach, the molecular exciton model, and some specific fitting-functions, are compared using the transition energies derived from theoretical calculations on three thiophene-based oligomer series. Specifically, oligomers of up to 30 repeating units have been considered to include the saturation effects as a function of chain length. The coupled oscillator model of W. Kuhn and the fitting-function of Hirayama are the models that present the better suit on the transition energy interpolation as a function of chain length. Using only the first four oligomers of the series (n = 2 up to 8) yields an estimation of the transition energy on the polymer limit with an average error of ～1.5%. The vertical and adiabatic ionization potential present a better fit with the Hückel model approach. Finally, implications of the environmental polarity on the electronic properties, molecular geometry, charge distribution, and aromaticity are shortly discussed.     

Synthesis and photophysical properties of aryl-substituted 2-borylbenzaldimines and their extended π-conjugated congeners

Novel N-aryl-substituted 2-borylbenzaldimines 6 and related systems with extended π-framework 7 based on two borylbenzaldimine units linked by a spacer moiety were synthesized by condensation reactions of 2-(dimesitylboryl)benzaldehyde 3 with various amines 4 and diamines 5. All compounds were completely characterized including X-ray diffraction, especially in view of Lewis acid-base B-O and B-N interactions. The electronic as well as the photophysical properties of bisimines 7 were determined using cyclic voltammetry, UV/vis, and fluorescence spectroscopy and quantum chemistry. These compounds feature large Stokes shifts and reversible reduction waves. Interestingly, UV irradiation experiments unfold enhanced photostability for compounds 7 with an extended π-skeleton. By use of 1,8-diaminonaphthalene we observed the formation of a hitherto unknown BN-heterocyclic compound 9 fused with a perimidine skeleton. Structural and energetic aspects were evaluated by high level quantum chemical methods (DFT and SCS-MP2-calculations).     

Features of charge carrier concentration and mobility in π-conjugated polymers

We show the possibilities of experimental investigation of charge carrier mobility and concentration features by extraction methods of equilibrium, photoexcited and injected charge carriers in π-conjugated polymers, where, due to relatively high conductivity, the classic time-of-flight method is inappropriate.     

Synthesis and characterization of porphyrin-terthiophene and oligothiophene π-conjugated copolymers for polymer solar cells

Two novel conjugated polymers with alternating main chain structures of zinc porphyrin-terthiophene (P-PTT) and zinc porphyrin-oligothiophene (P-POT) were synthesized by Stille reaction. The effect of different lengths of thiophene chains on the thermal, optical, electrochemical, and photovoltaic properties of the two copolymers were investigated in detail. P-PTT exhibited higher onset decomposition temperature (392 °C) and glass-transition temperature (152 °C) than those of P-POT. The introduction of thiophene units in the meso-aryl positions of porphyrin resulted in the red shift and broader absorption spectrum compared with zinc porphyrin (P_Zn) monomer both in chloroform solutions and on thin solid films. The electrochemical properties indicated that the energy levels of the polymers were suitable for efficient charge transfer and separation at the interface between the polymer donor and PCBM acceptor. The bulk heterojunction solar cells based on P-PTT and P-POT showed power conversion efficiencies up to 0.32% and 0.18%, respectively.     

New π-conjugated electroluminescent polymers containing organoiridium quinolinolate complexes in the backbone and light diodes formed on their basis

New conjugated copolyfluorenes containing covalently bound quinolinolate complexes of iridium in the backbone are synthesized under conditions of the Yamamoto reaction. The structures and properties of the polymers are characterized via NMR spectroscopy, GPC, TMA, and TGA. All copolymers show solubility in common organic solvents and feature good thermal and thermo-oxidative properties. The absorption, luminescence, and electrochemical properties of the polymers are investigated. In thin films, the polymers emit blue light with wavelengths in the range 450–470 nm. The electroluminescence spectra of the copolymers show broad intense bands in the visible region with maxima at 500–525 nm corresponding to various emission colors with the chromaticity coordinates (0.361, 0.437) and (0.247, 0.411). The synthesized iridium-containing copolyfluorenes may be used as electron-hole transport materials in light-emitting diodes.     

Synthesis of extended, π-conjugated isoindolin-1-ones

The synthesis and characterization of extended, conjugated molecules containing isoindolinone units was explored. Nucleophilic cyclizations between an amide and an alkyne were found to be an efficient method of producing the desired isoindolin-1-ones in high yields. A variety of derivatives were synthesized, demonstrating that a number of structural alterations could be made while maintaining good regio- and stereospecificity in the cyclized product.     

Synthesis of 1,2,5,6- and 1,4,5,8-anthracenetetrone: Building blocks for π-conjugated small molecules and polymers

Reliable reactions for the synthesis of two interesting anthracenetetrones have been identified and optimized. Both syntheses start from dihydroxy-9,10-anthraquinones and were selected for maximized efficiency and minimized workload. Work-up of all reactions can be achieved without column chromatography, which facilitates further scale-up. So far, both target compounds are considerably underexplored despite their promising molecular structure for use in devices and in organic synthesis, especially as building blocks for π-conjugated compounds. The crystal structure of 1,4,5,8-anthracentetrone is reported.     

Electrical properties of σ-conjugated polymers with additives and their applications in sensors

The charge carrier transport in poly[methyl(phenyl)silylene] (PMPSi) proceeds predominantly along the σ-delocalized Si backbone with participation of interchain hopping and polaron formation. The charge carrier mobility increases with increasing electron affinity of acceptor dopands having zero dipole moments. On the other band, the hole drift mobility is influenced by the dipole moment of the dopand. The electrostatic charge-dipole interactions cause a broadening of the energy distribution of transport states, which results in a decrease in the charge carrier mobility. An addition of organic salts leads, under the conditions of increased humidity, to an increase in electrical conductivity and capacitance. This is demonstrated on the layers PMPSi/1,5-dimorpholino-1,5-diphenylpentamethinium perchlorate.     

Synthesis of π-expanded BODIPYs and their fluorescent properties in the visible-near-infrared region

A series of π-expanded boron-dipyrromethenes (BODIPYs) fused with aromatic rings at β,β-positions, such as benzene, acenaphthylene, and benzofluoranthene were prepared by the reaction of BF₃·OEt₂ with bicyclo[2.2.2]octadiene-fused dipyrromethene and the subsequent retro Diels-Alder reaction. These BODIPYs exhibited the absorptions and the fluorescence emissions over wide range of visible-near-infrared region at 500-800 nm. BODIPYs composed of two fluorantho[8,9-f]isoindoles absorbed and emitted at red-region over 750 nm with absolute fluorescence quantum yield (Φ_f) of ca. 0.3, although they are unstable under air in room light. BODIPY composed fluorantho[8,9-f]isoindole and acenaphtho[1,2-c]pyrrole was stable and showed a bright fluorescence emission at 695 nm with high Φ_f of 0.70.     

Redox-active π-conjugated polymer nanotubes with viologen for encapsulation and release of fluorescent dye in the nanospace

We report the encapsulation of negatively charged Au nanoparticles and anionic fluorescent (FL) dye in the inner cavity of redox-active cationic polymer nanotubes with viologen via electrostatic interaction and the release of the FL dye from the FL dye confined in the cavity of the polymer nanotubes by electrochemical and chemical reduction.     

Photophysics of π-conjugated oligomers and polymers that contain transition metal complexes

There has been a surge of interest concerning the synthesis, optical and electronic properties of π-conjugated polymers that contain transition metal complexes. The integration of transition metal chromophores that feature metal to ligand charge transfer (MLCT) excited states into a π-conjugated polymer permits easy variation of the material’s optical and electronic properties. In this review, we survey a number of recent photophysical studies that examine π-conjugated oligomer or polymer/transition metal complex hybrids. The effects of the types of π-conjugated backbone, oligomer and polymer structure, the conjugation length and coordination to a variety of metal chromophores on the photophysics of the organic-metal hybrids are discussed. The degree of interaction between the polymer (or oligomer) and metal complex based excited states dramatically modulates the observed photophysics.     

Synthesis and properties of π-conjugated donor–acceptor macrocycles derived from phenanthrylene building blocks

Phenanthrylene-ethynylidene macrocycles combining electron donor and electron acceptor subunits in their shape-persistent fully conjugated core were synthesized. The donor subunits consisted of two 9,10-dialkoxyphenanthrenes linked either with 1,2-ethynylidene or 2,5-thienylene bridge. The acceptors were 9,10-phenanthroquinone and dibenzoquinoxaline and dibenzophenazines derived from it. Solvatochromic photoluminescence from intramolecular-charge-transfer (ICT) excited state was observed mainly in non-polar solvents. In more polar solvents, the excited states favor non-radiative relaxation. DFT calculated HOMO/LUMO energies of the macrocycles correlate well with spectroscopic and electrochemical data. In the series of substituted dibenzophenazine acceptors a good correlation with Hammett substituent constants σ_p^– was found.     

Syntheses, structures, and properties of metal complexes involving π-conjugated tetrathiafulvalene-pyridine ligand

Four metal complexes based on the phenyl-bridged pyridine ligand with tetrathiafulvalene unit (TTF-Ph-Py, L), Ni^II(acac)₂(L)₂ (1, acac = acetylacetonate), M(hfac)₂(L)₂ (M = Ni^II, 2; M = Cu^II, 3; hfac = hexafluoroacetylacetonato) and [Co^II(Tp^Ph2)(OAc)(L)]·H₂O (4, Tp^Ph2 = hydridotri(3,5-diphenylpyrazol-1-yl) borate), have been synthesized and structurally characterized. The absorption spectra and redox behaviors of these new compounds have been studied. Optimized conformation and molecular orbital diagram of L has been calculated with density functional theory (DFT).     

Synthesis and properties of new π-conjugated pyridine ligands with tetrathiafulvalene derivatives and the rhenium(I) tricarbonyl complexes

Three new π-conjugated pyridine ligands with redox-active tetrathiafulvalene (TTF) derivatives, L₁-L₃, have been synthesized and characterized. The Diels-Alder reaction is the key step for this multistep synthetic strategy. The crystal structures of L₁ and L₃ have been studied. The electrochemical and spectroscopic properties of these new ligands, as well as the corresponding tricarbonyl rhenium(I) complexes (ReL₁(CO)₃X, X = Cl, 5; X = Br, 6) have also been investigated.     

Synthesis and properties of polyfluorene copolymers bearing thiophene and porphyrin

To search for more wider absorption and higher charge carriers mobilities materials of polymer solar cell, a series of soluble alternating polyfluorene copolymers were synthesized by palladium-catalyzed Suzuki coupling reaction. Their structures were determined by 1H NMR, IR and UV-vis. And their UV-vis absorption spectra indicated that they had strong absorption over 600 nm spectral range and nearly cover 400-700 nm visible region. The band gaps of copolymers calculated according to cyclic voltammetry （CV） were between 1.96 and 2.03 eV. Polymer：TiO2 bulk-heterojunction films were made from mixtures of polymer and titanium isopropoxide, a precursor for TiO2, via hydrolysis in air overnight. The photoluminescence at 380-800 nm of the blend film of PT-TPP20 （5 mg/mL）：Ti（OC3H7）4 （80 μL/mL） （20% volume fraction） was significantly quenched in the 50% Ti（OC3H7）4 blend film, indicating that rapid and efficient separation of photoinduced electron-hole pairs.     

Novel π-conjugated molecules based on diimidazopyridine: Significantly improved the photophysical,thermal and electrochemical properties bearing different aryl substituents

A series of π-conjugated molecules based on diimidazolepyridine derivatives were designed, synthesized by Suzuki coupling reaction and cyclization reaction and characterized. Diimidazolepyridine motif as the main structure could improve the thermal stability and optical property of the materials. All of the target compounds exhibited good thermal stabilities with T_d values in the range of 416–490?°C. These compounds showed steady blue light emissions in the range of 424–478?nm and high quantum yields (0.33–0.69) in solution. Especially, compound 4f achieved appropriate energy gap (E_g?=?2.69?eV) and high fluorescence quantum yields (Φ_f?=?0.69) because of introducing electron-donating group, such energy gap was helpful to electronic transfer and transport. The materials have great potential for good electronic-transmission materials in OLEDs.     

Synthesis and photophysical properties of five-membered ring π-conjugated materials based on bisthiazol-2-yl-amine and their metal complexation studies

Poly(5,5′-(2-hexyldecyl)-bisthiazol-2-yl-amine) (PBTA) is prepared by nickel(0) mediated Yamamoto-type coupling. The photoluminescence (PL) spectrum of PBTA in THF solution displays pure blue emission with a peak centered at 444 nm without any shoulder peaks and the HOMO and LUMO values for PBTA are estimated to be 5.11  and 2.90 eV, respectively. In addition, we have synthesized a novel bisthiazol-2-yl-amine (BTA)-cored donor-acceptor (D-A) chromophore system, namely 5-(4-(diphenylamino)phenyl)-N-(5-(4-(diphenylamino)phenyl)thiazol-2-yl)-N-octylthiazol-2-amine (2-TPA-BTA) in which the electron-donating (D) moiety is triphenylamine group and the electron-withdrawing (A) unit is thiazole group. Furthermore, in this report, we present the complexation studies of both the BTA and 2-TPA-BTA chromophores with Cu(II) and Pd(II), respectively. The crystal structures are established by single-crystal X-ray diffraction analysis. These studies not only provide the general photophysical principles of the materials based on BTA moiety but also encourage progress toward realizing the full potential of its hybrid metal-organic frameworks.