Fiber‐in‐Tube Design of Co9S8‐Carbon/Co9S8: Enabling Efficient Sodium Storage

The sodium‐ion battery is a promising battery technology owing to its low price and high abundance of sodium. However, the sluggish kinetics of sodium ion makes it hard to achieve high‐rate performance, therefore impairing the power density. In this work, a fiber‐in‐tube Co₉S₈‐carbon(C)/Co₉S₈ is designed with fast sodiation kinetics. The experimental and simulation analysis show that the dominating capacitance mechanism for the high Na‐ion storage performance is due to abundant grain boundaries, three exposed layer interfaces, and carbon wiring in the design. As a result, the fiber‐in‐tube hybrid anode shows a high specific capacity of 616 mAh g^?1 after 150 cycles at 0.5 A g^?1. At 1 A g^?1, a capacity of ca. 451 mAh g^?1 can be achieved after 500 cycles. More importantly, a high energy density of 779 Wh kg^?1 and power density of 7793 W kg^?1 can be obtained simultaneously.     

Facile simultaneous polymerization enabled in-situ confinement of size-tailored GeO2 nanocrystals in continuous S-Doped carbons for lithium storage

GeO₂ is a promising anode material for lithium ion batteries due to its high theoretical capacity (1126 mAh g^?1 for reversibly storing 4.4 Li⁺), and moderately low operating voltage (<1.5 V). Nevertheless, the fabrication of truly durable GeO₂ anode with satisfactory rate capability and cycling stability remains a big challenge because of its inherent low conductivity, and the large volume expansion upon charge-discharge that causes severe capacity fading. In this study, an innovative nanostructure with size-adjustable GeO₂ nanoparticles (16–26 nm) embedded in continuous S-doped carbon (GeO₂/S-doped carbon, GSC) has been successfully fabricated via a facile in-situ simultaneous polymerization method followed by heat treatment. The electrochemical results indicate that the as-prepared GSC composites show high reversible capacity (672.9 mAh g^?1 at 50 mA g^?1), superior rate capability (332.9 mAh g^?1 at 1000 mA g^?1), and long-term cycle life (179 mAh g^?1 after 500 cycles at 1000 mA g^?1) as anode materials for lithium ion batteries. The excellent electrochemical performance of GSC nanocomposites could be ascribed to the homogeneous and continuous S-doped carbon matrix, which provides shortened ion diffusion pathway, increased electrical conductivity, enhanced structural stability, and introduced surface/interface property.     

Hermetically Coated and Well‐Separated Co3O4 Nanophase within Porous Graphitic Carbon Nanosheets: Synthesis,Confinement Effect,and Improved Lithium‐Storage Capacity and Durability

Considerable lithium‐driven volume changes and loss of crystallinity on cycling have impeded the sustainable use of transition metal oxides (MOs) as attractive anode materials for advanced lithium‐ion batteries that have almost six times the capacity of carbon per unit volume. Herein, Co₃O₄ was used as a model MO in a facile process involving two pyrolysis steps for in situ encapsulation of nanosized MO in porous two‐dimensional graphitic carbon nanosheets (2D‐GCNs) with high surface areas and abundant active sites to overcome the above‐mentioned problems. The proposed method is inexpensive, industrially scalable, and easy to operate with a high yield. TEM revealed that the encaged Co₃O₄ is well separated and uniformly dispersed with surrounding onionlike graphitic layers. By taking advantage of the high electronic conductivity and confinement effect of the surrounding 2D‐GCNs, a hierarchical GCNs‐coated Co₃O₄ (Co₃O₄@GCNs) anode with 43.5 wt % entrapped active nanoparticles delivered a remarkable initial specific capacity of 1816 mAh g^?1 at a current density of 100 mA g^?1. After 50 cycles, the retained capacity is as high as 987 mAh g^?1. When the current density was increased to 1000 mA g^?1, the anode showed a capacity retention of 416 mAh g^?1. Enhanced reversible rate capability and prolonged cycling stability were found for Co₃O₄@GCN compared to pure GCNs and Co₃O₄. The Co₃O₄@GCNs hybrid holds promise as an efficient candidate material for anodes due to its low cost, environmentally friendly nature, high capacity, and stability.     

金属有机框架衍生的高性能锂离子电池负极Co3O4/C复合材料

为克服Co_3O_4负极材料导电率低、循环稳定性差的缺点,选择Co_2(NDC)_2DMF_2(NDC=1,4-萘二甲酸根)为前驱体采用两步煅烧工艺,制备了具有高碳含量的Co_3O_4/C复合材料。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和拉曼光谱对样品进行了表征。采用热重分析法(TGA)测定了Co_3O_4/C中非晶态碳的含量。作为锂离子电池的负极材料,Co_3O_4/C具有高的可逆比容量、优异的循环性能(在200 m A·g~(-1)的电流密度下,循环200圈后放电比容量稳定保持在1 000 mAh·g~(-1))和良好的倍率性能(在100、200、500、1 000和2 000 mA·g~(-1)的电流密度下,放电比容量为分别1 076.3、976.2、872.9、783.6和670.1 mAh·g~(-1))。材料优异的电化学性能归结为有机配体衍生的高含量非晶态碳的导电和缓冲作用有利于电子的快速传递并有效减缓了金属氧化物充放电过程中的体积膨胀。     

ZIF-67 derived carbon wrapped discontinuous CoxP nanotube as anode material in high-performance Li-ion battery

Transition metal phosphides (TMPs) are prospective anode materials for lithium-ion batteries (LIBs) due to their high theoretical capacities and low redox voltages. Herein, we report a template directing method to develop a tube-sheath hybrid composing of cobalt phosphide particles encapsulated in metal organic frameworks (MOFs) derived N-doped carbon sheaths (Co_xP@NC). The utilization of directing template leads to a homogenous distribution of the subsequently formed cobalt phosphide particles, restrains the aggregation of cobalt phosphides, and thus results in the superb rate capability and cyclability. Contributable to the integrated merits of the interior downsized cobalt phosphide particles and the outer ZIF-67 derived porous carbon sheath, the volume expansion during cycling is effectively suppressed. The Co_xP@NC hybrid shows superb electrochemical performance as anode material for LIB, with good reversible capacity of 928 mAh·g^?1 after 100 cycles at 0.1 A g^?1, and high stability of 526 mAh·g^?1 after 600 cycles at 1.0 A g^?1. This work provides a route for rational design of MOF derived carbon-based anode material for LIB, which could also be applied as a promising platform in diverse field.     

Tin oxide–based anodes for both lithium-ion and sodium-ion batteries

Tin oxide, SnO₂, is a suitable anode for both lithium-ion and sodium-ion batteries (LIBs and SIBs) unlike graphite and silicon, which are only suitable anodes for LIB. SnO₂ has garnered much attention because of its high theoretical capacities (LIB = 1494 mA h g^?1 and SIB = 1378 mA h g^?1). However, the commercialization of SnO₂ anodes is still hugely challenged because these anodes suffer from large volume expansion caused by lithiation/delithiation or sodiation/desodiation during cycling, leading to severe capacity fading. The adopted strategies to solve these problems are nanosizing that greatly improves the structural stability of the material and helps to have fast reaction kinetics. Synthesizing nanocomposite of SnO₂ nanoparticles with nanoporous carbonaceous materials to buffer the volume expansion, enhance cycling stability; create oxygen deficiency to improve intrinsic conductivity. In this review, the recent research trends on SnO₂ as anode for both LIB and SIB systems are presented.     

Metal-organic framework-derived (Mn-1)CoxSy@(Ni–Cu)OHs marigold flower-like core@shell as cathode and (Mn–Fe10)Sx@graphene–foam as anode materials for ultra-high energy-density asymmetric supercapacitor

Energy density, rate-capability and cycling stability performance of asymmetric supercapacitors (ASCs) can be improved by engineering the rational design of both cathode and anode electrodes materials-based on hierarchical structures. The fabrication of metal-organic-frameworks (MOFs)-derived hierarchical core@shell nanosheet arrays is undoubtedly a crucial task; however, their development is important to promote efficient asymmetric supercapacitor devices. Herein, we are reporting MOF-derived (Mn-1)Co_xS_y nanosheet arrays enfolded with unique marigold flower-like nanoreservoirs of (Ni–Cu)OHs as a novel core@shell-based cathode material for asymmetric supercapacitor. In the presence of the highly conductive, porous and uniquely structured (Ni–Cu)OHs shell material, the multicomponent (Mn-1)Co_xS_y@(Ni–Cu)OHs core@shell nanosheet arrays deliver an ultra-high areal capacity of 2.19 mA h cm^?2 at 1 mA cm^?2. Newly developed (Mn–Fe₁₀)S_x@GF hybrid film with enriched redox contributions is used as an anode material to configure the ASC device. The (Mn-1)Co_xS_y@(Ni–Cu)OHs//(Mn–Fe₁₀)S_x@GF ASC device delivers an ultra-high energy density performance of 95.25 W h/kg at a power density of 963.2 W k/g with capacity retention of 92.08% after 10,000 cycles. Thus, the successful syntheses of multicomponent-based (Mn-1)Co_xS_y@(Ni–Cu)OHs core@shell as cathode and (Mn–Fe₁₀)S_x@GF as anode electrode materials with excellent electrochemical outcomes have given new directions to develop ultra-high performance asymmetric supercapacitors.     

Facile synthesis of single-crystalline Co<Subscript>3</Subscript>O<Subscript>4</Subscript> cubes as high-performance anode for lithium-ion batteries

Transition metal oxides have great potential as anode for lithium-ion batteries (LIBs), owing to their high theoretical capacity and low cost. However, the poor cycling stability and electron conductivity have limited the widely expected application of transition metal oxides. In this work, highly single-crystalline Co₃O₄ cubes with 400 nm in the average side length are successfully synthesized by a facile hydrothermal method. When used as anode for LIBs, the Co₃O₄ single-crystalline cubes exhibit highly stable and substantial discharge capacities of the amount to 877 mA h g^?1 at 200 mA g^?1 after 110 cycles with remarkable capacity retention of 98%, and 576 mA h g^?1 even at a high rate of 2000 mA g^?1. The scalability of the preparation method and the impressive results achieved here demonstrate the potential for the application to the future development of transition metal oxides anodes. These results suggest that the single-crystalline Co₃O₄ is a promising electrode material for the high-performance energy storage devices.     

Tunable and Specific Formation of C@NiCoP Peapods with Enhanced HER Activity and Lithium Storage Performance

The superior properties of nanomaterials with a special structure can provide prospects for highly efficient water splitting and lithium storage. Herein, we fabricated a series of peapodlike C@Ni_2?xCo_xP (x≤1) nanocomposites by an anion‐exchange pathway. The experimental results indicated that the HER activity of C@Ni_2?xCo_xP catalyst is strongly related to the Co/Ni ratio, and the C@NiCoP got the highest HER activity with low onset potential of ～45 mV, small Tafel slope of ～43 mV dec^?1, large exchange current density of 0.21 mA cm^?2, and high long‐term durability (60 h) in 0.5 m H₂SO₄ solutions. Equally importantly, as an anode electrode for lithium batteries, this peapodlike C@NiCoP nanocomposite gives excellent charge–discharge properties (e.g., specific capacity of 670 mAh g^?1 at 0.2 A g^?1 after 350 cycles, and a reversible capacity of 405 mAh g^?1 at a high current rate of 10 A g^?1). The outstanding performance of C@NiCoP in HER and LIBs could be attributed to the synergistic effect of the rational design of peapodlike nanostructures and the introduction of Co element.     

Solid-state synthesis of nitrogen-doped graphitic nanotubes with outstanding electrochemical properties

Synthesis of new anodes is crucial for commercialization of rechargeable potassium-ion batteries (PIBs). In this work, the nitrogen-doped graphitic nanotubes (NGTs) were synthesized by solid-state reaction method. The microstructural characterization of synthesized NGTs revealed the presence of many active sites (provided by N-doping i.e. N_p and N_g) and tubular channels for the K⁺ ion transport. The NGTs electrode was tested against potassium metal in the presence of carbonate based electrolytes. The NGTs revealed the maximum reversible capacity of 220 mA h g^?1 at 20 mA g^?1 current density. Furthermore, the cycle stability of NGTs was confirmed by cycling it for 200 times at the current density of 100 mA g^?1, where specific capacity of 81.2 mA h g^?1 was retained. The excellent electrochemical properties (rate capability) and fast synthesis of NGTs highlights its possibility to be used against post-lithium metal anodes in near future.     

Porous ZnO/Co3O4/N‐doped carbon nanocages synthesized via pyrolysis of complex metal–organic framework (MOF) hybrids as an advanced lithium‐ion battery anode

Metal oxides have a large storage capacity when employed as anode materials for lithium‐ion batteries (LIBs). However, they often suffer from poor capacity retention due to their low electrical conductivity and huge volume variation during the charge–discharge process. To overcome these limitations, fabrication of metal oxides/carbon hybrids with hollow structures can be expected to further improve their electrochemical properties. Herein, ZnO‐Co₃O₄ nanocomposites embedded in N‐doped carbon (ZnO‐Co₃O₄@N‐C) nanocages with hollow dodecahedral shapes have been prepared successfully by the simple carbonizing and oxidizing of metal–organic frameworks (MOFs). Benefiting from the advantages of the structural features, i.e. the conductive N‐doped carbon coating, the porous structure of the nanocages and the synergistic effects of different components, the as‐prepared ZnO‐Co₃O₄@N‐C not only avoids particle aggregation and nanostructure cracking but also facilitates the transport of ions and electrons. As a result, the resultant ZnO‐Co₃O₄@N‐C shows a discharge capacity of 2373 mAh g^?1 at the first cycle and exhibits a retention capacity of 1305 mAh g^?1 even after 300 cycles at 0.1 A g^?1. In addition, a reversible capacity of 948 mAh g^?1 is obtained at a current density of 2 A g^?1, which delivers an excellent high‐rate cycle ability.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

Characterization and properties of ternary P(VdF-HFP)-LiTFSI-EMITFSI ionic liquid polymer electrolytes

Gel polymer electrolytes containing 1-ethyl-3-methylimidazolium-bis (trifluoromethyl-sulfnyl)imide (EMITFSI) ionic liquid were prepared for lithium ion batteries by solution casting method. Thermal and electrochemical properties have been determined for the gel polymer electrolytes. Proper addition of EMITFSI to the P(VdF-HFP)-LiTFSI polymer electrolyte improves the ionic conductivity and electrochemical window to 2.11 × 10⁻³ S cm⁻¹ (30 °C) and 4.6 V. In combination of the prepared ternary P(VdF-HFP)-LiTFSI-EMITFSI ionic liquid polymer electrolytes, Li₄Ti₅O₁₂ anode exhibited two extra voltage plateaus around 1.1 V and 2.3 V except the typical voltage plateau around 1.6 V by possible side reaction between ionic liquid and polymer. LiFePO₄ cathode exhibited high capacity above 140 mA h g⁻¹ and retention of 93.1% due to the suppressed polarization effect caused by enhanced ion transport properties. The high temperature of 80 °C didn't have significant impact on the cycling performance.     

Fabrication and electrochemical properties of the Sn–Ni–P alloy rods array electrode for lithium-ion batteries

A new ternary Sn–Ni–P alloy rods array electrode for lithium-ion batteries is synthesized by electrodeposition with a Cu nanorods array structured foil as current collector. The Cu nanorods array foil is fabricated by heat treatment and electrochemical reduction of Cu(OH)₂ nanorods film, which is grown directly on Cu substrate through an oxidation method. The Sn–Ni–P alloy rods array electrode is mainly composed of pure Sn, Ni₃Sn₄ and Ni–P phases. The electrochemical experimental results illustrate that the Sn–Ni–P alloy rods array electrode has high reversible capacity and excellent coulombic efficiency, with an initial discharge capacity and charge capacity of 785.0 mAh g^?1 and 567.8 mAh g^?1, respectively. After the 100th discharge–charge cycling, capacity retention is 94.2% with a value of 534.8 mAh g^?1. The electrode also performs with an excellent rate capacity.     

Electrochemical behavior of spherical LiNi1/3Co1/3Mn1/3O2 as cathode material for aqueous rechargeable lithium batteries

Spherical LiNi_1/3Co_1/3Mn_1/3O₂ powders have been synthesized from co-precipitated spherical metal hydroxide. The electrochemical performances of the LiNi_1/3Co_1/3Mn_1/3O₂ electrodes in 1 M LiNO₃, 5 M LiNO₃, and saturated LiNO₃ aqueous electrolytes have been studied using cyclic voltammetry and ac impedance tests in this work. The results show that LiNi_1/3Co_1/3Mn_1/3O₂ electrode in saturated LiNO₃ electrolyte exhibits the best electrochemical performance. An aqueous rechargeable lithium battery containing LiNi_1/3Co_1/3Mn_1/3O₂ cathode, LiV_2.9Ni_0.050Mn_0.050O₈ anode, and saturated LiNO₃ electrolyte is fabricated. The battery delivers an initial capacity of 98.2 mAh g⁻¹ and keeps a capacity of 63.9 mAh g⁻¹ after 50 cycles at a rate of 0.5 C (278 mA g⁻¹ was assumed to be 1 C rate).     

A Sustainable Solid Electrolyte Interphase for High‐Energy‐Density Lithium Metal Batteries Under Practical Conditions

High‐energy‐density Li metal batteries suffer from a short lifespan under practical conditions, such as limited lithium, high loading cathode, and lean electrolytes, owing to the absence of appropriate solid electrolyte interphase (SEI). Herein, a sustainable SEI was designed rationally by combining fluorinated co‐solvents with sustained‐release additives for practical challenges. The intrinsic uniformity of SEI and the constant supplements of building blocks of SEI jointly afford to sustainable SEI. Specific spatial distributions and abundant heterogeneous grain boundaries of LiF, LiN_xO_y, and Li₂O effectively regulate uniformity of Li deposition. In a Li metal battery with an ultrathin Li anode (33 μm), a high‐loading LiNi_0.5Co_0.2Mn_0.3O₂ cathode (4.4 mAh cm^?2), and lean electrolytes (6.1 g Ah^?1), 83 % of initial capacity retains after 150 cycles. A pouch cell (3.5 Ah) demonstrated a specific energy of 340 Wh kg^?1 for 60 cycles with lean electrolytes (2.3 g Ah^?1).     

Nanocrystalline ZnMn2O4 as a novel lithium-storage material

Nanocrystalline ZnMn₂O₄ is prepared by a polymer-pyrolysis route and used as a novel anode for lithium ion batteries. XRD and HRTEM studies reveal that the products are highly phase-pure and 30–60 nm in size. Galvanostatic cycling of ZnMn₂O₄ electrode at 100 mA g⁻¹ (about 0.52 mA cm⁻²) between 0.01 and 3.0 V up to 50 cycles exhibits almost stable cycling performance between 10 and 50 cycles with only an average capacity fade of 0.20% per cycle and the electrode still maintains a capacity of 569 mAh g⁻¹ after 50 cycles.     

Effects of complexants on [Ni1/3Co1/3Mn1/3]CO3 morphology and electrochemical performance of LiNi1/3Co1/3Mn1/3O2

LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials for the application of lithium ion batteries were synthesized by carbonate co-precipitation routine using different ammonium salt as a complexant. The structures and morphologies of the precursor [Ni_1/3Co_1/3Mn_1/3]CO₃ and LiNi_1/3Co_1/3Mn_1/3O₂ were investigated through X-ray diffraction, scanning electron microscope, and transmission electron microscopy. The electrochemical properties of LiNi_1/3Co_1/3Mn_1/3O₂ were examined using charge/discharge cycling and cyclic voltammogram tests. The results revealed that the microscopic structures, particle size distribution, and the morphology properties of the precursor and electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂ were primarily dependent on the complexant. Among all as-prepared LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials, the sample prepared from Na₂CO₃–NH₄HCO₃ routine using NH₄HCO₃ as the complexant showed the smallest irreversible capacity of 19.5 mAh g⁻¹ and highest discharge capacity of 178.4 mAh g⁻¹ at the first cycle as well as stable cycling performance (98.7% of the initial capacity was retained after 50 cycles) at 0.1 C (20 mA g⁻¹) in the voltage range of 2.5–4.4 V vs. Li⁺/Li. Moreover, it delivered high discharge capacity of over 135 mAh g⁻¹ at 5 C (1,000 mA g⁻¹).     

Breaking Mass Transport Limitations by Iodized Polyacrylonitrile Anodes for Extremely Fast-Charging Lithium-Ion Batteries

The fast-charging capability of rechargeable batteries is greatly limited by the sluggish ion transport kinetics in anode materials. Here we develop an iodized polyacrylonitrile (I-PAN) anode that can boost the bulk/interphase lithium (Li)-ion diffusion kinetics and accelerate Li-ion desolvation process to realize high-performance fast-charging Li-ion batteries. The iodine immobilized in I-PAN framework expands ion transport channels, compresses the electric double layer, and changes the inner Helmholtz plane to form LiF/LiI-rich solid electrolyte interphase layer. The dissolved iodine ions in the electrolyte self-induced by the interfacial nucleophilic substitution of PF₆⁻ not only promote the Li-ion desolvation process, but also reuse the plated/dead Li formed on the anode under fast-charging conditions. Consequently, the I-PAN anode exhibits a high capacity of 228.5 mAh g⁻¹ (39 % of capacity at 0.5 A g⁻¹ delivered in 18 seconds) and negligible capacity decay for 10000 cycles at 20 A g⁻¹. The I-PAN||LiNi_0.8Co_0.1Mn_0.1O₂ full cell shows excellent fast-charging performance with attractive capacities and negligible capacity decay for 1000 cycles at extremely high rates of 5 C and 10 C (1 C=180 mA g⁻¹). We also demonstrate high-performance fast-charging sodium-ion batteries using I-PAN anodes.     

Cobalt‐Doped FeS2 Nanospheres with Complete Solid Solubility as a High‐Performance Anode Material for Sodium‐Ion Batteries

Considering that the high capacity, long‐term cycle life, and high‐rate capability of anode materials for sodium‐ion batteries (SIBs) is a bottleneck currently, a series of Co‐doped FeS₂ solid solutions with different Co contents were prepared by a facile solvothermal method, and for the first time their Na‐storage properties were investigated. The optimized Co_0.5Fe_0.5S₂ (Fe0.5) has discharge capacities of 0.220 Ah g^?1 after 5000 cycles at 2 A g^?1 and 0.172 Ah g^?1 even at 20 A g^?1 with compatible ether‐based electrolyte in a voltage window of 0.8–2.9 V. The Fe0.5 sample transforms to layered Na_xCo_0.5Fe_0.5S₂ by initial activation, and the layered structure is maintained during following cycles. The redox reactions of Na_xCo_0.5Fe_0.5S₂ are dominated by pseudocapacitive behavior, leading to fast Na⁺ insertion/extraction and durable cycle life. A Na₃V₂(PO₄)₃/Fe0.5 full cell was assembled, delivering an initial capacity of 0.340 Ah g^?1.