活性艳兰X-BR在银镜表面增强拉曼光谱的研究

自1974年Fleishmann[1]等人发现表面增强拉曼散射(surface-enhanced Raman scattering,SERS)现象以来,SERS技术由于其高的表面检测灵敏度以及易于获得全波段振动光谱等优点,已为人们在分子水平上认识贵金属表面提供了丰富的信息。人们主要利用该技术研究吸附分子的各种性质。一     

用表面增强拉曼散射研究电解法制备的纳米银膜

用一种廉价的电解方法制备了纳米银膜,并详细研究了在这种银膜上的表面增强拉曼散射效果．结晶紫为本实验的检测性分子．通过实验发现,这种银膜用便携式拉曼光谱仪测试并计算出的表面增强拉曼散射的增强因子为603,并对结晶紫的最小检出限为0．1nmol／L．     

DNA的亮绿共振光散射法测定

研究了在表面活性剂十六烷基三甲基溴化铵（CTMAB）的存在下，碱性染料亮绿（BG）与小牛胸腺脱氧核糖核酸（ctDNA）体系结合反应及其共振发光光谱；在pH7.3-7.6范围内，亮绿在核酸分子表面进行长距组装后，在470nm产生共振光散射（RLS）增强峰，其发光强度与DNA浓度呈线性关系；方法已成功地应用于合成样品的测定。     

金纳米棒:合成、修饰、自组装、SERS及生物医学应用

纳米颗粒作为信号感应单元在化学与生物传感应用中已引起广泛关注,这些功能和金属纳米结构与光相互作用时产生的表面等离子体共振密切相关.表面增强拉曼散射(SERS),是指吸附在粗糙的金属纳米结构表面的被分析物,在光照射下其拉曼光谱获得显著增强的异常表面光学现象,近年来.SERS技术已广泛用于物质检测和生物传感等研究,在生物医学领域表现出巨大的应用潜力并取得了令人瞩目的研究成果.本文阐述了金纳米棒的制备方法、表面修饰和共轭生物分子的方法.并从金纳米棒表面增强拉曼散射的角度系统阐述基于金纳米棒表面增强拉曼散射的1D,2D,3D自组装,并介绍了近期金纳米棒表面增强拉曼散射在生物医学检测与成像中最具有代表性的应用研究.     

银纳米粒子有序自组装体中偶联分子的表面增强拉曼光谱研究

采用自组装方法,分别以1,4-二巯基苯和对巯基苯胺为偶联分子,在光滑银基底表面上构筑了银纳米粒子的单层和双层有序结构.表面增强拉曼光谱研究表明,在有序银纳米粒子组装体中偶联分子的拉曼散射得到很大增强,其中1,4-对巯基苯的拉曼散射增强效应主要来自光滑银基底表面与单层银纳米粒子间的电磁耦合,而对巯基苯胺的拉曼散射增强效应则主要由两层银纳米粒子之间耦合作用所致.两种不同的耦合作用所产生的增强效应大致相近.     

柔性表面增强拉曼散射基底研究进展

综述近10年柔性表面增强拉曼散射基底的研究进展。基于3类主要的柔性表面增强拉曼散射基底,对基底的制备方法、实际应用以及未来的发展趋势等方面进行了探讨。柔性表面增强拉曼散射基底具有机械性能优良、不易被损坏、成本低以及便于运输携带等优点,在生物、化学、环境及食品安全等各个领域存在着巨大的应用潜力。在实际检测中,表面增强拉曼散射可制备高灵敏度、稳定性、选择性且重现性好的活性基底。该综述对于从事柔性表面增强拉曼散射基底研究的科研人员具有一定的指导意义。     

GaAs基底上金纳米粒子的二维组装及其表面增强喇曼散射活性

利用巯基苯胺作耦联分子,成功地将Au纳米粒子组装到GaAs(100)表面上,并且用TM-AFM观察了纳米粒子在表面上的分布情况.Raman研究表明,该基底显示出表面增强喇曼散射活性.     

分形表面粗糙度与光散射关系的研究

用Weielstxass－Mandelbrot函数产生了一维的分形表面，在几何光学适用的范围内研究了这些表面的光散射特性．发现分形线数D越大，通常被认为越粗糙的表面，其光散射的角分布反而比D小的表面更集中．文章最后解释了这种现象的成因．     

金纳米粒子的二步电解合成及表面增强拉曼散射活性研究

在超声条件下采用二步电解方法在十六烷基三甲基溴化铵/丙酮/水三组分体系中合成金纳米粒子. 首先采用恒电流或电位的阶跃方法, 使体系中生成较小的金纳米粒子并作为晶种; 接着采用电位双阶跃方法, 使金纳米粒子在原来基础上继续生长, 控制电解电量可获得不同大小的金纳米粒子. 通过静电作用在洁净的单晶硅片表面组装金纳米粒子, 获得具有不同形貌的硅片, 并以此作为表面增强拉曼散射基底, 以吡啶为探针分子, 研究了不同基底的表面增强拉曼散射活性, 结果表明吡啶谱峰强弱与纳米粒子在硅片表面的排列形貌有关.     

表面增强拉曼散射活性基底

表面增强拉曼散射(SERS)是人们将激光拉曼光谱应用到表面科学研究中所发现的异常表面光学现象。它可以将吸附在材料表面的分子的拉曼信号放大106到1014倍,这使其在探测器的应用和单分子检测方面有着巨大的发展潜力。由于分子所吸附的基底表面形态是SERS效应能否发生和SERS信号强弱的重要影响因素,所以分子的承载基体是很关键的,因而SERS活性基底的研究一直是该领域的研究热点之一。本文总结了形态各异的表面增强拉曼散射活性基底,分析了最新发展并对其未来作一展望。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.