Assessment of stretched vortex subgrid‐scale models for LES of incompressible inhomogeneous turbulent flow

The physical space version of the stretched vortex subgrid scale model is tested in LES of the turbulent lid‐driven cubic cavity flow. LES is carried out by using a higher order finite‐difference method. The effects of different vortex orientation models and subgrid turbulence spectrums are assessed through comparisons of the LES predictions against DNS. Three Reynolds numbers 12000, 18000, and 22000 are studied. Good agreement with the DNS data for the mean and fluctuating quantities is observed. Copyright © 2013 John Wiley & Sons, Ltd.     

Computation of turbulent free‐surface flows around modern ships

This paper presents the calculated results for three classes of typical modern ships in modelling of ship‐generated waves. Simulations of turbulent free‐surface flows around ships are performed in a numerical water tank, based on the FINFLO‐RANS SHIP solver developed at Helsinki University of Technology. The Reynolds‐averaged Navier–Stokes (RANS) equations with the artificial compressibility and the non‐linear free‐surface boundary conditions are discretized by means of a cell‐centred finite‐volume scheme. The convergence performance is improved with the multigrid method. A free surface is tracked using a moving mesh technology, in which the non‐linear free‐surface boundary conditions are given on the actual location of the free surface. Test cases recommended are a container ship, a US Navy combatant and a tanker. The calculated results are compared with the experimental data available in the literature in terms of the wave profiles, wave pattern, and turbulent flow fields for two turbulence models, Chien's low Reynolds number k–εmodel and Baldwin–Lomax's model. Furthermore, the convergence performance, the grid refinement study and the effect of turbulence models on the waves have been investigated. Additionally, comparison of two types of the dynamic free‐surface boundary conditions is made. Copyright © 2003 John Wiley& Sons, Ltd.     

Surface‐sampled simulations of turbulent flow at high Reynolds number

A new approach to turbulence simulation, based on a combination of large eddy simulation (LES) for the whole flow and an array of non–space‐filling quasi‐direct numerical simulations (QDNS), which sample the response of near‐wall turbulence to large‐scale forcing, is proposed and evaluated. The technique overcomes some of the cost limitations of turbulence simulation, since the main flow is treated with a coarse‐grid LES, with the equivalent of wall functions supplied by the near‐wall sampled QDNS. Two cases are tested, at friction Reynolds number Re_τ=4200 and 20000. The total grid point count for the first case is less than half a million and less than 2 million for the second case, with the calculations only requiring a desktop computer. A good agreement with published direct numerical simulation (DNS) is found at Re_τ=4200, both in the mean velocity profile and the streamwise velocity fluctuation statistics, which correctly show a substantial increase in near‐wall turbulence levels due to a modulation of near‐wall streaks by large‐scale structures. The trend continues at Re_τ=20000, in agreement with experiment, which represents one of the major achievements of the new approach. A number of detailed aspects of the model, including numerical resolution, LES‐QDNS coupling strategy and subgrid model are explored. A low level of grid sensitivity is demonstrated for both the QDNS and LES aspects. Since the method does not assume a law of the wall, it can in principle be applied to flows that are out of equilibrium.     

A novel implicit numerical treatment for non‐linear turbulence models using high and low Reynolds number formulations

Non‐linear turbulence models can be seen as an improvement of the classical eddy‐viscosity concept due to their better capacity to simulate characteristics of important flows. However, application of non‐linear models demand robustness of the numerical method applied, requiring a stable discretization scheme for convergence of all variables involved. Usually, non‐linear terms are handled in an explicit manner leading to possible numerical instabilities. Thus, the present work shows the steps taken to adapt a general non‐linear constitutive equation using a new semi‐implicit numerical treatment for the non‐linear diffusion terms. The objective is to increase the degree of implicitness of the solution algorithm to enhance convergence characteristics. Flow over a backward‐facing step was computed using the control volume method applied to a boundary‐fitted coordinate system. The SIMPLE algorithm was used to relax the algebraic equations. Classical wall function and a low Reynolds number model were employed to describe the flow near the wall. The results showed that for certain combination of relaxation parameters, the semi‐implicit treatment proposed here was the sole successful treatment in order to achieve solution convergence. Also, application of the implicit method described here shows that the stability of the solution either increases (high Reynolds with non‐orthogonal mesh) or preserves the same (low Reynolds number applications). Additional advantages of the procedure proposed here lie in the possibility of testing different non‐linear expressions if one considers the enhanced robustness and stability obtained for the entire numerical algorithm. Copyright © 2010 John Wiley & Sons, Ltd.     

High‐order detached eddy simulation,zonal LES and URANS of cavity and labyrinth seal flows

Hybrid numerical large eddy simulation (NLES), detached eddy simulation (DES) and URANS methods are assessed on a cavity and a labyrinth seal geometry. A high sixth‐order discretization scheme is used and is validated using the test case of a two‐dimensional vortex. The hybrid approach adopts a new blending function. For the URANS simulations, the flow within the cavity remains steady, and the results show significant variation between models. Surprisingly, low levels of resolved turbulence are observed in the cavity for the DES simulation, and the cavity shear layer remains two dimensional. The hybrid RANS–NLES approach does not suffer from this trait. For the labyrinth seal, both the URANS and DES approaches give low levels of resolved turbulence. The zonal Hamilton–Jacobi approach on the other had given significantly more resolved content. Both DES and hybrid RANS–NLES give good agreement with the experimentally measured velocity profiles. Again, there is significant variation between the URANS models, and swirl velocities are overpredicted. Copyright © 2013 John Wiley & Sons, Ltd.     

Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.     

Time‐dependent turbulent cavitating flow computations with interfacial transport and filter‐based models

Turbulent cavitating flow computations need to address both cavitation and turbulence modelling issues. A recently developed interfacial dynamics‐based cavitation model (IDCM) incorporates the interfacial transport into the computational modelling of cavitation dynamics. For time‐dependent flows, it is known that the engineering turbulence closure such as the original k–ε model often over‐predicts the eddy viscosity values reducing the unsteadiness. A recently proposed filter‐based modification has shown that it can effectively modulate the eddy viscosity, rendering better simulation capabilities for time‐dependent flow computations in term of the unsteady characteristics. In the present study, the IDCM along with the filter‐based k–ε turbulence model is adopted to simulate 2‐D cavitating flows over the Clark‐Y airfoil. The chord Reynolds number is Re=7.0 × 10⁵. Two angles‐of‐attack of 5 and 8° associated with several cavitation numbers covering different flow regimes are conducted. The simulation results are assessed with the experimental data including lift, drag and velocity profiles. The interplay between cavitation and turbulence models reveals substantial differences in time‐dependent flow results even though the time‐averaged characteristics are similar. Copyright © 2005 John Wiley & Sons, Ltd.     

Numerical study of the turbulent flow in strongly curved stationary and rotating U‐ducts

A large‐eddy simulation (LES) study is undertaken to explore the complex flow of developing turbulent flow through stationary and rotating U‐ducts with strong curvature. Three flow cases are investigated: stationary (non‐rotating), positive and negative rotational cases. Stationary and positive rotational cases are shown to have similar flow characteristics in terms of the mean velocity variations, although the predicted separation zone is nearly doubled in size for positive rotational case. Unlike the positive rotation for which the laminarization effects are observed, turbulence is significantly enhanced for the negative rotation mainly due to the existence of strong secondary flow. Turbulence is found to be highly anisotropic throughout the duct apart from the far downstream regions of the bend for the negative rotational case. The stress–strain relation seems to be completely invalid in the U‐duct apart from the bend region. Copyright © 2009 John Wiley & Sons, Ltd.     

Development of a hybrid particle‐mesh method for two‐phase flow simulations

A hybrid particle‐mesh method was developed for efficient and accurate simulations of two‐phase flows. In this method, the main component of the flow is solved using the constrained interpolated profile/multi‐moment finite volumemethod; the two‐phase interface is rendered using the finite volume particle (FVP) method. The effect of surface tension is evaluated using the continuum surface force model. Numerical particles in the FVP method are distributed only on the surface of the liquid in simulating the interface between liquid and gas; these particles are used to determine the density of each mesh grid. An artificial term was also introduced to mitigate particle clustering in the direction of maximum compression and sparse discretization errors in the stretched direction. This enables accurate interface tracking without diminishing numerical efficiency. Two benchmark simulations are used to demonstrate the validity of the method developed and its numerical stability. Copyright © 2016 John Wiley & Sons, Ltd.     

Time‐dependent simulation of cavitating flow with k − ℓ turbulence models

A compressible, multiphase, one‐fluid Reynolds‐averaged Navier–Stokes solver has been developed to study turbulent cavitating flows. The interplay between turbulence and cavitation regarding the unsteadiness and structure of the flow is complex and not well understood. This constitutes a critical point to accurately simulate the dynamic behavior of sheet cavities. In the present study, different formulations based on a k ? ? transport‐equation model are investigated and a scale‐adaptive formulation is proposed. Numerical results are given for a Venturi geometry and comparisons are made with experimental data. The scale‐adaptive model shows several improvements compared with standard turbulence models. Copyright © 2011 John Wiley & Sons, Ltd.     

Robustness of the hybrid DRP‐WENO scheme for shock flow computations

This paper describes a new variant of hybrid scheme that is constructed by a wave‐capturing scheme and a nonoscillatory scheme for flow computations in the presence of shocks. The improved fifth‐order upwind weighted essentially nonoscillatory scheme is chosen to be conjugated with the seven‐point dispersion‐relation‐preserving scheme by means of an adaptive switch function of grid‐point type. The new hybrid scheme can achieve a better resolution than the hybrid scheme which is based on the classical weighted essentially scheme. Ami Harten's multiresolution analysis algorithm is applied to density field for detecting discontinuities and setting point values of the switch function adaptively. Moreover, the tenth‐order central filter is applied in smooth part of the flow field for damping dispersion errors. This scheme can promote overall computational efficiency and yield oscillation‐free results in shock flows. The resolution properties and robustness of the new hybrid scheme are tested in both 1D and 2D linear and nonlinear cases. It performs well for computing flow problems with rich structures of weak/strong shocks and large/small vortices, such as the shock‐boundary layer interaction problem in a shock tube, which illustrates that it is very robust and accurate for direct numerical simulation of gas‐dynamics flows. Copyright © 2011 John Wiley & Sons, Ltd.     

A gas‐kinetic scheme for the simulation of turbulent flows on unstructured meshes

This paper presents a numerical method for simulating turbulent flows via coupling the Boltzmann BGK equation with Spalart–Allmaras one equation turbulence model. Both the Boltzmann BGK equation and the turbulence model equation are carried out using the finite volume method on unstructured meshes, which is different from previous works on structured grid. The application of the gas‐kinetic scheme is extended to the simulation of turbulent flows with arbitrary geometries. The adaptive mesh refinement technique is also adopted to reduce the computational cost and improve the efficiency of meshes. To organize the unstructured mesh data structure efficiently, a non‐manifold hybrid mesh data structure is extended for polygonal cells. Numerical experiments are performed on incompressible flow over a smooth flat plate and compressible turbulent flows around a NACA 0012 airfoil using unstructured hybrid meshes. These numerical results are found to be in good agreement with experimental data and/or other numerical solutions, demonstrating the applicability of the proposed method to simulate both subsonic and transonic turbulent flows. Copyright © 2016 John Wiley & Sons, Ltd.     

Numerical simulation of turbulent free surface flow with two‐equation k–ε eddy‐viscosity models

This paper presents a finite difference technique for solving incompressible turbulent free surface fluid flow problems. The closure of the time‐averaged Navier–Stokes equations is achieved by using the two‐equation eddy‐viscosity model: the high‐Reynolds k–ε (standard) model, with a time scale proposed by Durbin; and a low‐Reynolds number form of the standard k–ε model, similar to that proposed by Yang and Shih. In order to achieve an accurate discretization of the non‐linear terms, a second/third‐order upwinding technique is adopted. The computational method is validated by applying it to the flat plate boundary layer problem and to impinging jet flows. The method is then applied to a turbulent planar jet flow beneath and parallel to a free surface. Computations show that the high‐Reynolds k–ε model yields favourable predictions both of the zero‐pressure‐gradient turbulent boundary layer on a flat plate and jet impingement flows. However, the results using the low‐Reynolds number form of the k–ε model are somewhat unsatisfactory. Copyright © 2004 John Wiley & Sons, Ltd.     

Developing a hybrid flux function suitable for hypersonic flow simulation with high‐order methods

In this paper, we develop a new hybrid Euler flux function based on Roe's flux difference scheme, which is free from shock instability and still preserves the accuracy and efficiency of Roe's flux scheme. For computational cost, only 5% extra CPU time is required compared with Roe's FDS. In hypersonic flow simulation with high‐order methods, the hybrid flux function would automatically switch to the Rusanov flux function near shock waves to improve the robustness, and in smooth regions, Roe's FDS would be recovered so that the advantages of high‐order methods can be maintained. Multidimensional dissipation is introduced to eliminate the adverse effects caused by flux function switching and further enhance the robustness of shock‐capturing, especially when the shock waves are not aligned with grids. A series of tests shows that this new hybrid flux function with a high‐order weighted compact nonlinear scheme is not only robust for shock‐capturing but also accurate for hypersonic heat transfer prediction. Copyright © 2015 John Wiley & Sons, Ltd.     

Evaluation of well‐balanced bore‐capturing schemes for 2D wetting and drying processes

We consider numerical solutions of the two‐dimensional non‐linear shallow water equations with a bed slope source term. These equations are well‐suited for the study of many geophysical phenomena, including coastal engineering where wetting and drying processes are commonly observed. To accurately describe the evolution of moving shorelines over strongly varying topography, we first investigate two well‐balanced methods of Godunov‐type, relying on the resolution of non‐homogeneous Riemann problems. But even if these schemes were previously proved to be efficient in many simulations involving occurrences of dry zones, they fail to compute accurately moving shorelines. From this, we investigate a new model, called SURF_WB, especially designed for the simulation of wave transformations over strongly varying topography. This model relies on a recent reconstruction method for the treatment of the bed‐slope source term and is able to handle strong variations of topography and to preserve the steady states at rest. In addition, the use of the recent VFRoe‐ncv Riemann solver leads to a robust treatment of wetting and drying phenomena. An adapted ‘second order’ reconstruction generates accurate bore‐capturing abilities.This scheme is validated against several analytical solutions, involving varying topography, time dependent moving shorelines and convergences toward steady states. This model should have an impact in the prediction of 2D moving shorelines over strongly irregular topography. Copyright © 2006 John Wiley & Sons, Ltd.