Ionic Complexes of Polyacids and Cationic Surfactants

Comb-like ionic complexes were prepared from polyuronic acids (pectinic and alginic acids) and alkyltrimethylammonium surfactants bearing linear alkyl chains with 18, 20 and 22 carbon atoms. In the condensed state, these complexes were able to self-assemble in ordered structures which were thermally stable up to ∼200 °C. The complexes were analysed by DSC and WAXS/SAXS and compared to their analogous made from poly(γ-glutamic acid). They all adopt a biphasic layered structure in which the main chain and the alkyl side chain alternate with a nanometric periodicity. Alkyl side chains were partially crystallized in these complexes and they show reversible melting at temperatures within the 60-80 °C range depending on the length of the polymethylene segment.     

Ionic complexes of biosynthetic poly(malic acid) and poly(glutamic acid) as prospective drug-delivery systems

The hydrolytic degradability and erythromycin release from stoichiometric ionic complexes of biotechnological poly(beta,L-malic acid)s and poly(gamma,D-glutamic acid)s with alkyltrimethylammonium surfactants were investigated. The influence of pH, temperature and antibiotic load on hydrolysis rate was examined. It was found that poly(malic acid) complexes degraded by a surface erosion mechanism at a higher rate than poly(glutamic acid) complexes, which eroded in bulk. Erythromycin was lodged in the paraffinic subphase of the complexes and upon aging it was delivered according to a sigmoidal profile that appeared to be independent on the antibiotic load.     

Interaction of Ionic Surfactants with a Hydrophobic Modified Thermosensitive Polymer

The interactions of a hydrophobic modified thermosensitive polymer poly(N-isopropylacrylamide)-ran-poly(methacrylic acid)-ran-poly(octadecyl acrylate) with five ionic surfactants, namely, sodium dodecyl sulfate (SDS), dodecayltrimethylaminium bromide (DTAB), 1,2-bis(dodecyldimethylammonio)- hexane dibromide (12-6-12), 1-dodecanaminium, N,N′-[(1,4-dioxo-1,4-butanediyl) bis(oxy-2,1-ethanediyl)] bis[N,N-dimethyl-, bromide] (12-su-12), and dodecanaminium, N, N′-[[(2E)-1,4-dioxo-2-butene-1, 4-diyl]bis(o-xy-2,1ethanediy-l)] bis[N,N-dimethyl-, bromide] (12-fo-12) were investigated by the static-steady fluorescence methods using crystal violet and pyrene as the probes. It was found that the SDS interacted with the polymer driven by the hydrophobic interaction, while the cationic surfactants first entered the core of the polymer micelle through the hydrophobic interaction then the corona area of the polymer micelle through the hydrophobic and static electrical interactions. Measurements of the transmittances of the polymer/surfactants/PBS mixtures at different temperatures showed that the SDS suppressed the phase transition of the system, while additions of the cationic surfactants into the polymer induced the phase transitions of the polymer complex systems first, then suppressed them after the minimum values of the lower critical phase transition temperatures (LPTT) was reached. It was also found that increase of the MAA content in the polymer could broaden the LPTT range adjusted by the cationic surfactants.      

Synthesis and SFM Study of Comb‐Like Poly(4‐vinylpyridinium) Salts and Their Complexes with Surfactants

Summary: Poly(4‐vinylpyridinium) bromides containing octyl and dodecyl pendant groups were synthesized. Bromide anions in these polymer salts were substituted with dodecylsulfate and bis(2‐ethylhexylsuccinate) anions using ion‐exchange reactions. Initially, P4VP and its derivatives loaded with hydrophobic groups were deposited on a mica surface from diluted solutions in chloroform for visualization. Images of single adsorbed macromolecules were obtained using scanning force microscopy. Original P4VP chains form partially compacted self‐intersecting coils. Loading the polymer chains with large hydrophobic groups and especially the increase in the number of alkyl tails (see Figure) per monomer unit of the polymer chain leads to the stretching of the coils, and the comb‐like macromolecules adopt more and more extended self‐avoiding 2D conformations when deposited on the substrate.

Polymer chains with large hydrophobic groups and increasing number of alkyl tails per monomer unit of the polymer chain.     

Comb-like ionic complexes of cationic surfactants with bacterial poly(gamma-glutamic acid) of racemic composition

Comb-like ionic complexes, nATMA . PG(DL)GA, were prepared from microbial poly(gamma-glutamic acid), with a nearly racemic configuration, and alkyltrimethylammoniun bromides, with linear alkyl chains containing an even number of carbon atoms, n, ranging from 12 to 22. The complexes had a nearly stoichiometric composition, displayed thermal stability up to temperatures above 200 degrees C and were insoluble in water but soluble in organic solvents. In the solid state, they were arranged in a regularly layered structure with the alkyl side chain crystallized for n > or = 18. Heating above melting entailed a contraction in the interlayer distance which varied from 1 to 10% depending on the value of n. Comparison with data reported on similar complexes obtained from nearly enantiomerically pure poly(gamma-glutamic acid) revealed an overall behavior very similar for the two series but with specific significant differences concerning side chain crystallinity and dimensional response to temperature.     

高效液相色谱法测定油田水中的非离子表面活性剂

提出了一种用高效液相色谱法测定油田水中聚氧乙烯辛基苯酚醚－10（OP－10）总量的方法,讨论了固定相和流动相体系的选择、操作参数的优化、共存物对测定的干扰。测定了模拟油田水样品。     

离子液体型表面活性剂C12mimBr与普通表面活性剂混合性质的研究

研究了离子液体型表面活性剂C12mimBr与阳离子表面活性剂Gemini 12-3-12, DTAB及阴离子表面活性剂SDS复配体系的性质, 并分别采用Rubingh-Margules模型和Rubingh-正规溶液模型计算了临界胶束浓度和混合胶团组成. 研究发现, 两表面活性剂分子结构的匹配性及带电头基之间的相互作用是影响混合溶液性质的主要因素. 对于分子结构差别较大的C12mimBr与Gemini 12-3-12的混合, 其行为远远偏离理想混合性质; 对疏水链长相同仅亲水头基不同的C12mimBr与DTAB则接近于理想混合; 而对C12mimBr＋SDS的复配体系, 正、负电荷间强烈的相互吸引使得混合体系大大偏离理想行为. 计算发现, 两种理论模型得到的混合胶团组成基本一致, 但Rubingh-Margules模型预测的临界胶束浓度比Rubingh-正规溶液模型要好     

Interaction of Nonionic Surfactant Triton-X-100 with Ionic Surfactants

The interaction in two mixtures of a nonionic surfactant Triton-X-100 (TX-100) and different ionic surfactants was investigated. The two mixtures were TX-100/sodium dodecyl sulfate (SDS) and TX-100/cetyltrimethylammonium bromide (CTAB) at molar fraction of TX-100, α_TX-100 = 0.6. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), maximum surface excess concentration (Γ_max), and minimum area per molecule at the air/solution interface (A _min) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were also determined. Mixtures of both TX-100/SDS and TX-100/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.     

助表面活性剂对阴/阳离子表面活性剂复配形成微乳液的影响

中相微乳液;盐度扫描;助表面活性剂对阴/阳离子表面活性剂复配形成微乳液的影响     

阴离子型聚丙烯酰胺与阳离子表面活性剂的相互作用

采用自由基水溶液共聚法制备了带有负电荷的水溶性聚丙烯酰胺,研究了水溶液中聚合物与阳离子表面活性剂的相互作用及所导致的水溶性、黏度和流变学性质的变化,为进一步研究驱油提供了理论基础.     

Interaction of slightly cross-linked gels of poly(diallyldimethylammonium bromide) with sodium dodecyl sulfate. Diffusion of surfactant ions in gel

The dynamics of the changing microenvironment of the fluorescent probe pyrene in slightly cross-linked networks of poly(diallyldimethylmmonium bromide) during diffusion of sodium dodecyl sulfate (SDS) in the gel phase has been investigated by fluorescence spectroscopy. Values of the spectral ratio I₃/I₁ for pyrene monomer included in SDS micelles in the swollen networks fall between the corresponding values for pyrene in water and for pyrene dissolved in SDS micelles in aqueous solution. In the narrow interval of the surfactant concentrations in the gel phase, the formation of pyrene excimers is observed. The values of the critical micelle concentration in the gel phase (ca. 5 × 10^?4 to 8 × 10^?4 mol/L) are tenfold lower than in aqueous solutions of the surfactant. The effective micellar diffusion coeffecient D in the gel phase increases with increasing swelling of the network. © 1993 John Wiley & Sons, Inc.     

Plants to Polyelectrolytes: Theophylline Polymers and Their Microsphere Synthesis

To extend fossil oil supplies, sustainable feed stocks for the production of useful reagents and polymers should be harnessed. In this regard, chemicals derived from plants are excellent candidates. While the vast majority of plant sources used for polymer science only contain C _x H _y O _z , alkaloids such as caffeine, nicotine, and theophylline possess nitrogen functionality that can provide new functions for bioderived polymers and their synthesis. In this context, the chemistry of theophylline, a natural product found in chocolate and tea, is exploited to create a cationic “poly(theophylline)” in a straightforward fashion for the first time. This work demonstrates how this new polymer can be synthesized and used for the creation of narrowly disperse cationic microspheres.

     

Polymer-Based Superhydrophobic Coating Fabricated from Polyelectrolyte Multilayers of Poly(allylamine hydrochloride) and Poly(acrylic acid)

Superhydrophobic films mainly based on poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) polyelectrolyte multilayer have been deposited onto cleaned glass substrate by a layer-by-layer dip coating method. 3 bilayers of the PAH and PAA was directly coated onto the substrate as an underlying layer for subsequent coating. Desired surface roughness on the polyelectrolyte bilayers was created by etching the bilayers in hydrochloric acid solution so as to create the open pore having suitable size at the surface. Then, nanoparticles such as SiO₂ and TiO₂ of various sizes were deposited onto the etched polyelectrolyte bilayers. Finally, the surfaces were further modified with semifluorinated silane followed by cross-linking at 180 °C for 2 h to obtain desirable surface morphological features. The effect of etching time and addition of nanoparticles on surface morphology was investigated using an atomic force microscope (AFM). Wetting ability of the prepared film was determined by measuring water droplet contact angle using a goniometer. Adhesion between the superhydrophobic films and the substrate was evaluated by using a standard tape test method (D3359). The adhesion was improved by reducing the organic content in the films.     

Adsorption and Recovery of Ionic Surfactants by β-Cyclodextrin Polymer

The adsorption and recovery of ionic surfactants, such as dodecylbenzenesulfonic acid (DBS) and benzalkonium chloride (BKC), from an aqueous solution were studied using the β-cyclodextrin polymer (β-CDP). BKC always demonstrated a higher adsorption efficiency than DBS in batch tests, isotherms, and column tests. The adsorption characteristics of the surfactants seemed to be caused by inclusion into β-CD, and they were easily determined using the Langmuir adsorption isotherm. Furthermore, the surfactants adsorbed by β-CDP were easily released by shaking it with a mixture of water and methanol. Recovery efficiency was dependent on the mixture ratio of the solvent, and regenerated β-CDP was reusable as an adsorbent.     

Effect of Surfactants and Ionic Strength on Dissociation of Hydrochlorides of Phenothiazine Derivatives

Abstract

A study of the effect of the anionic surfactant dodecyl sulfate, the cationic surfactant carbethoxypentadecyl trimethyl ammonium bromide (Septonex), nonionic surfactant p-octyl phenyl polyoxyethylene (Triton X-100), and a strong electrolyte (KBr) on the dissociation of the hydrochlorides of two derivatives of phenothiazine (diethazine and fluphenazine) was made. It was found that sodium dodecyl sulfate increases the pKa value, whereas Septonex and Triton X-100 decrease this value. The presence of KBr suppresses the effect of the surfactants. A new method for the potentiometric determination of fluphenazine in an aqueous medium was proposed.     

Synthesis and Ionic Conductivity of Network Polymer Electrolytes with Internal Plasticizers

Network polymer electrolytes with free oligo(oxyethylene) chains as internal plasticizers were prepared by cross-linking poly(ethylene glycol) acrylates. The effects of salt concentration and properties of internal plasticizers on ionic conductivity were studied.     

Interaction of Fluorocarbon Containing Hydrophobically Modified Polyelectrolyte with Nonionic Surfactants

ＩｎｔｒｏｄｕｃｔｉｏｎＷａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓｈａｖｅｇａｉｎｅｄｃｏｎｓｉｄｅｒａｂｌｅａｔ ｔｅｎｔｉｏｎｉｎｔｈｅｐａｓｔｄｅｃａｄｅｓｂｅｃａｕｓｅｏｆｔｈｅｉｒｗｉｄｅｌｙｉｎｄｕｓ ｔｒｉａｌａｐｐｌｉｃａｔｉｏｎｓａｎｄｆｒｉｅｎｄｌｉｎｅｓｓｔｏｅｎｖｉｒｏｎｍｅｎｔ .1 3Ｅｓｐｅ ｃｉａｌｌｙｈｙｄｒｏｐｈｏｂｉｃａｌｌｙｍｏｄｉｆｉｅｄｗａｔｅｒ ｓｏｌｕｂｌｅｐｏｌｙｍｅｒｓ(ＨＭＷＳＰ)ｗｈｉｃｈｂｅａｒａｓｍａｌｌａｍｏｕｎｔｏｆｈｙｄｒｏｐｈｏｂｅｓｏｎｔ…     

The Synthesis of Poly(Vinyl Alcohol) Grafted with Fluorinated Protic Ionic Liquids Containing Sulfo Functional Groups

There has been an ongoing need to develop polymer materials with increased performance as proton exchange membranes (PEMs) for middle- and high-temperature fuel cells. Poly(vinyl alcohol) (PVA) is a highly hydrophilic and chemically stable polymer bearing hydroxyl groups, which can be further altered. Protic ionic liquids (proticILs) have been found to be an effective modifying polymer agent used as a proton carrier providing PEMs’ desirable proton conductivity at high temperatures and under anhydrous conditions. In this study, the novel synthesis route of PVA grafted with fluorinated protic ionic liquids bearing sulfo groups (–SO₃H) was elaborated. The polymer functionalization with fluorinated proticILs was achieved by the following approaches: (i) the PVA acylation and subsequent reaction with fluorinated sultones and (ii) free-radical polymerization reaction of vinyl acetate derivatives modified with 1-methylimidazole and sultones. These modifications resulted in the PVA being chemically modified with ionic liquids of protic character. The successfully grafted PVA has been characterized using ¹H, ¹⁹F, and ¹³C-NMR and FTIR-ATR. The presented synthesis route is a novel approach to PVA functionalization with imidazole-based fluorinated ionic liquids with sulfo groups.