Poly(β-benzyl-l-aspartate)-block-poly(vinylpyrrolidone) diblock copolymers (PAsp(OBzl)-b-PVP) having both hydrophobic and hydrophilic segments of various lengths were synthesized by a combination of ATRP and ROP. These amphiphilic diblock copolymers formed polymeric micelles consisting of a hydrophobic PAsp(OBzl) core and a hydrophilic PVP shell in aqueous solution. The block copolymer was characterized using 1H NMR and gel permeation chromatography (GPC) analysis. Due to its core–shell structure, this block polymer forms unimolecular micelles in aqueous solutions. The micelle properties of PAsp(OBzl)-b-PVP diblock copolymer were extensively studied by dynamic light scattering (DLS), fluorescence spectroscopy, and transmission electron microscopy (TEM). PAsp(OBzl)-b-PVP copolymers displayed the lowest CMC and demonstrated little cytotoxicity when exposed to SW-1990 pancreatic cancer cells. In order to assess its application in biomedical area, the anti-inflammation drug prednisone acetate was loaded as the model drug in the polymeric nanoparticles. In vitro release behavior of prednisone acetate was investigated, which showed a dramatic responsive fast/slow switching behavior according to the pH-responsive structural changes of a micelle core structure. All of theses features are quite feasible for utilizing it as a novel intelligent drug-delivery system. 相似文献
Poly(vinylpyrrolidone-b-styrene) (PVP-b-PS) diblock copolymers tethered to glass surfaces were prepared, and the effects on protein adsorption and cellular behavior to the glass and the modified glass surfaces investigated. The PVP-b-PS grafting process was confirmed by water contact angle and XPS measurements. The results obtained for the water contact angles suggest that there are two phases that coexist on the PVP-b-PS block copolymer tethered surface, under aqueous conditions. Although the PVP-b-PS surface possessed, to some extent, a protein resistant property, following introduction of the PS segment to the end of tethered PVP, both fibrinogen and lysozyme adsorption were increased significantly. The PVP-b-PS modified surface, based on Western-blot analysis, appeared to have the greatest amount of surface bound vitronectin, however the conformation of the adsorbed vitronectin may have subsequently been affected by the surface tethered copolymer as was suggested by cell culture results. From these results, we proposed that protein adsorption and cell adhesion can be regulated by tuning the chemical compositions of diblock copolymers tethered to surfaces. 相似文献
Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with 1H and 13C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant Kv for pyrene in the micelle and in aqueous solution was about 105. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius Rh,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks. 相似文献
ABA triblock copolymers were synthesized by dihydroxyl-capped PEO initiated enzymatic ring-opening polymerization (eROP) of
ε-CL in the presence of biocatalyst Novozyme 435. The chains ended with hydroxyl of block copolymers were modified by the
esterification of 2,2-dichloro acetyl chloride (DCAC) to obtain the tetrafunctional macroinitiator, which was used in the
ATRP of 4-vinylpyridine (4-VP). CuCl/HMTETA was used as the catalyst system in the ATRP of 4-VP to acquire the H-shaped block
copolymers (PVP)2-b-PCL-b-PEG-b-PCL-b-(PVP)2. The H-shaped block copolymers were characterized by FTIR, NMR, and GPC. Copolymers with high molecular weights (Mn = 46121 g/mol) and low polydispersities (Mw/Mn = 1.30) were prepared. Moreover, the morphology of the copolymer was examined with dynamic light scattering (DLS) and atomic
force microscopy (AFM). Spherical micelles with a diameter of 70 nm in aqueous solution were obtained. 相似文献
An anti-tumor drug doxorubicin was encapsulated in micelles of poly(ethylene glycol)-b-poly(2,2-dihydroxyl-methyl propylene carbonate)(PEG-b-PDHPC) diblock copolymers.The morphology of both blank micelles and drug loaded micelles was characterized by TEM.The in vitro drug release profiles of micelles were investigated.The cytotoxicity of the micelles was evaluated by incubating with Hela tumor cells and 3T3 fibroblasts.The drug loaded micelles were co-cultured with HepG2 cells to evaluate the in vitro anti-tumor efficacies.The results showed that the mean sizes of both micelles with different copolymer compositions increased after being loaded with drugs.The drug release rate of PEG45-b-PDHPC34 micelles was faster than that of mPEG114-b-PDHPC26,micelles.Both of the two block copolymers were non-toxic.The confocal laser scanning microscopy and flow cytometry results showed that both the drug loaded micelles could be internalized efficiently in HepG2 cells.The PEG45-b-PDHPC34 micelles exhibited higher anti-tumor activity comparing to mPEG114-b-PDHPC26 micelles. 相似文献
Dissipative particle dynamics simulation was applied to investigate the self-assembly of new segmented random-block copolymers (A-co-B)-b-B in selective solvents. The coarse-grained models of random-block copolymers were built. The effects of the composition of the copolymer, the interaction parameters, the volume fractions, as well as the ratio of hydrophilic particles to hydrophobic particles in the random segment, on the morphology of the aggregations were systematically investigated. The results showed that new segmented random-block copolymers (A-co-B)-b-B could self-assemble into rodlike micelle, spherical micelle and two-compartment micelle. Oval-shaped micelle and spherical micelle could be formed at different volume fractions. The simulation results provide an important reference to the design and synthesis of specific micelles. 相似文献
We report the design and synthesis of new fully biodegradable thermoresponsive amphiphilic poly(γ‐benzyl L ‐glutamate)/poly(ethyl ethylene phosphate) (PBLG‐b‐PEEP) block copolymers by ring‐opening polymerization of N‐carboxy‐γ‐benzyl L ‐glutamate anhydride (BLG? NCA) with amine‐terminated poly(ethyl ethylene phosphate) (H2N? PEEP) as a macroinitiator. The fluorescence technique demonstrated that the block copolymers could form micelles composed of a hydrophobic core and a hydrophilic shell in aqueous solution. The morphology of the micelles as determined by transmission electron microscopy (TEM) was spherical. The size and critical micelle concentration (CMC) values of the micelles showed a decreasing trend as the PBLG segment increased. However, UV/Vis measurements showed that these block copolymers exhibited a reproducible temperature‐responsive behavior with a lower critical solution temperature (LCST) that could be tuned by the block composition and the concentration. 相似文献
We report on the fabrication of self-assembled micelles from ABC-type miktoarm star polypeptide hybrid copolymers consisting of poly(ethylene oxide), poly(L-lysine), and poly(ε-caprolactone) arms, PEO(-b-PLL)-b-PCL, and their functional applications as co-delivery nanocarriers of chemotherapeutic drugs and plasmid DNA. Miktoarm star copolymer precursors, PEO(-b-PZLL)-b-PCL, were synthesized at first via the combination of consecutive "click" reactions and ring-opening polymerizations (ROP), where PZLL is poly(ε-benzyloxycarbonyl-L-lysine). Subsequently, the deprotection of PZLL arm afforded amphiphilic miktoarm star copolymers, PEO(-b-PLL)-b-PCL. In aqueous media at pH 7.4, PEO(-b-PLL)-b-PCL self-assembles into micelles consisting of PCL cores and hydrophilic PEO/PLL hybrid coronas. The hydrophobic micellar cores can effectively encapsulate model hydrophobic anticancer drug, paclitaxel; whereas positively charged PLL arms within mixed micellar corona are capable of forming electrostatic polyplexes with negatively charged plasmid DNA (pDNA) at N/P ratios higher than ca. 2. Thus, PEO(-b-PLL)-b-PCL micelles can act as co-delivery nanovehicles for both chemotherapeutic drugs and genes. Furthermore, polyplexes of pDNA with paclitaxel-loaded PEO(-b-PLL)-b-PCL micelles exhibited improved transfection efficiency compared to that of pDNA/blank micelles. We expect that the reported strategy of varying chain topologies for the fabrication of co-delivery polymeric nanocarriers can be further applied to integrate with other advantageous functions such as targeting, imaging, and diagnostics. 相似文献
Summary: Based on a hydrophilic poly(ethylene oxide) macroinitiator (PEOBr), a novel amphiphilic diblock copolymer PEO‐block‐poly(11‐(4‐cyanobiphenyloxy)undecyl) methacrylate) (PEO‐b‐PMA(11CB)) was prepared by atom transfer radical polymerization (ATRP) using CuCl/1,1,4,7,10,10‐hexamethyltriethylenetriamine as a catalyst system. An azobenzene block of poly(11‐[4‐(4‐butylphenylazo)phenoxyl]undecyl methacrylate) was then introduced into the copolymer sequence by a second ATRP to synthesize the corresponding triblock copolymer PEO‐b‐PMA(11CB)‐b‐PMA(11Az). Both of the amphiphilic block copolymers had well‐defined structures and narrow molecular‐weight distributions, and exhibited a smectic liquid‐crystalline phase over a wide temperature range.
The amphiphilic triblock copolymer synthesized here. 相似文献
The interaction of amphiphilic block copolymers comprising an anionic block (polyacrylate or polymethacrylate) and a hydrophobic
block (polystyrene, poly(butyl acrylate) or polyisobutylene) with lightly crosslinked poly(N,N-diallyl-N,N-dimethylammonium chloride) is studied for the first time. It is shown that the cationic hydrogel can sorb anionic amphiphilic
block copolymers via electrostatic interaction with the corona of block copolymer micelles. The rate of sorption of block
copolymer polyelectrolytes is significantly lower than the rate of sorption of linear polyions and is controlled by the lengths
of the hydrophilic and hydrophobic blocks and the flexibility of the latter blocks. The sorption of amphiphilic block copolymers
is accompanied by their self-assembly in the polycomplex gel and formation of a continuous hydrophobic layer impermeable to
water and the low-molecular-mass salt dissolved in it. 相似文献
Cobalt-mediated radical polymerization (CMRP) has enabled the polymerization of a wide range of monomers with predictable molecular parameters and well-defined compositions and architectures. However, the synthesis of hydrophilic polymers by CMRP directly in the aqueous phase is still challenging. Herein, a handy cobalt complex was developed to perform CMRP of N-vinylpyrrolidone (NVP), 2-hydroxyethyl acrylate (HEA), and N,N-dimethylacrylamide (DMA) with linearly increased molecular weight, low polydispersity values, and smoothly shifted gel permeation chromatography (GPC) traces. The chain extensions of NVP, HEA, and DMA revealed the well chain-end fidelity for the synthesis of block copolymers. Moreover, the poly(N-vinylpyrrolidone)-block-poly(vinyl acetate) (PVP-b-PVAc) amphiphilic block copolymer colloidal solution was achieved directly in aqueous phase by cobalt-mediated radical polymerization-induced self-assembly (CMR-PISA), forming the nanoparticles consisting of a hydrophilic PVP corona and a hydrophobic PVAc core. This new mediator opens the opportunity for the synthesis of various hydrophilic (co)polymers in an environmentally friendly manner. 相似文献