Synthesis,Adsorptive, and Photocatalytic Properties of Carbon Nanotubes/TiO<Subscript>2</Subscript> Nanocomposite Photocatalysts

The carbon nanotubes/TiO₂ (CNTs/TiO₂) composite photocatalysts composed of TiO₂ nanoparticles and multiwalled carbon nanotubes (CNTs) were prepared by a facile hydrothermal method. The photocatalysts were characterized by a range of analytical techniques including X-ray powder diffraction, field emission scanning electron microscope, thermal gravimetric analysis and UV–Vis optical absorption spectra, etc. The amount of TiO₂ nanoparticles growing on CNTs could be tuned by adjusting the dosage of precursor in the reaction solution. Both the adsorptivity and photocatalytic activities of pure CNTs, pure TiO₂, and the CNTs/TiO₂ nanocomposites were tested by the removal of methylene blue from water in dark and under a simulated sunlight, respectively. By comparison, the improved photocatalytic activity of the CNTs/TiO₂ nanocomposite is mainly due to that the CNTs can disperse the active component of TiO₂ nanoparticles, provide a larger the specific surface area, as well as act as an electron sink to accelerate the separation of the photogenerated charges.     

Nanocomposite Polymer Electrolytes for the Lithium Power Sources (a Review)

Nanocomposite polymer electrolytes represent a perspective class of polymer electrolytes for electrochemical devices in which nanodisperse filler is introduced to the “solvating matrix + lithium salt” base composition. This three-section paper reviews studies devoted to the preparing and investigating of different types of novel nanocomposite polymer electrolytes for lithium power sources carried out for the last 15 years. Its first section is devoted to the solid nanocomposite polymer electrolyte consisting of polyethylene oxide, lithium salt, and nanodisperse filler (Al₂O₃, TiO₂, SiO₂, etc.); the second section, to nanocomposite polymer membranes based on the polyvinylidene fluoride-co-hexafluoropropylene that can be used as a substitute for inert polyolefine separator of polypropylene, polyethylene, or their alternating layers. It is this type of the nanocomposite polymer electrolytes that is the most perspective one; the great majority of publications are dedicated to this electrolyte. The third section of the review covers the studies of the nanocomposite polymer electrolytes based on different polymers, oligomers, and co-polymers prepared by different methods. Nanoparticles of Al₂O₃, TiO₂, SiO₂, ZnO, MgO, Fe₃O₄, Ca₃(PO₄)2, ZrO₂, clay, ferroelectric ceramics SrBi₄Ti₄O₁₅, a compound SO₄^2-–ZrO₂, molecular sieves, nanochitin, etc., are discussed as possible additives to the nanocomposite polymer electrolytes. The reference list contains 101 items.     

Fabrication,characterization, and performance evaluation of polyethersulfone/TiO2 nanocomposite ultrafiltration membranes for produced water treatment

In the present work, development of neat and nanocomposite polyethersulfone membranes composed of TiO₂ nanoparticles is presented. Membranes are fabricated using nonsolvent phase inversion process with the objective of improving antifouling, hydrophilicity, and mechanical properties for real and synthetic produced water treatment. Membranes are characterized using scanning electron microscopy, Fourier‐transform infrared, contact angle, porosity measurement, compaction factor, nanoparticles stability, and mechanical strength. The performance of prepared membranes was also characterized using flux measurement and oil rejection. Fourier‐transform infrared spectra indicated that noncovalence bond formed between Ti and polyethersulfone chains. The contact angle results confirmed the improved hydrophilicity of nanocomposite membranes upon addition of TiO₂ nanoparticles owing to the strong interactions between fillers and water molecules. The increased water flux for nanocomposite membranes in comparison with neat ones can be due to coupling effects of improved surface hydrophilicity, higher porosity, and formation of macrovoids in the membrane structure. The membrane containing 7 wt% of TiO₂ nanoparticles was the best nanocomposite membrane because of its high oil rejection, water flux, antifouling properties, and mechanical stability. The pure water flux for this membrane was twice greater than that of neat membrane without any loss in oil rejection. The hydrophilicity and antifouling resistance against oil nominates developed nanocomposite membranes for real and synthetic produced water treatment applications with high performance and extended life span.     

CNTs表面改性与TiO2-CNTs异质结光催化性能

碳纳米管(CNTs)混酸(H₂SO₄/HNO₃, 体积比为3:1)超声辅助纯化及氧化植入活性基团－COOH, 进一步借助其转化为酰氯基团, 分别于CNTs 表面共价嫁接亲水性赖氨酸及亲脂性正十八胺基团, 赋予赖氨酸表面改性CNTs 显著水溶(6.85 mg·mL-1)和十八胺表面改性CNTs 显著醇溶(10.15 mg·mL^-1)性能. 运用低温水热法以亲水性CNTs 复合TiO₂, 溶胶-凝胶法以亲脂性CNTs 复合TiO₂, 观察到复合催化剂光催化性能随CNTs 溶剂分散性能增加而明显提升. 运用傅里叶变换红外(FTIR)、激光拉曼、X射线衍射(XRD)、Brunauer-Emmett-Teller 低温氮气吸附、透射电镜(TEM)及X光电子能谱(XPS)等手段表征, 系统探讨CNTs 的表面改性机制及CNTs 溶解分散性能与复合催化剂的光活性的关联. 认为表面改性CNTs 借助Ti－O－C键合促进其与纳米TiO₂的异质结合, 从而充分利用CNTs的大比表面积及电荷传输性能促进催化剂的污染物光催化降解.     

Preparation and characterization of poly(l-lactic acid)/TiO2 nanoparticle nanocomposite films with high transparency and efficient photodegradability

Poly(l-lactic acid)-TiO₂ nanoparticle nanocomposite films were prepared by incorporating surface modified TiO₂ nanoparticles into polymer matrices. In the process of preparing the nanocomposite films, severe aggregation of TiO₂ nanoparticles could be reduced by surface modification by using carboxylic acid and long-chain alkyl amine. As a result, the nanocomposite films with high transparency, similar to pure PLA films, were obtained without depending on the amount of added TiO₂ nanoparticles. A TEM micrograph of the nanocomposite films suggests that the TiO₂ nanoparticles of 3-6 nm in diameter were uniformly dispersed in polymer matrices. Photodegradation of PLA-TiO₂ nanoparticle nanocomposite films was also investigated. The results showed that nanocomposite films could be efficiently photodegraded by UV irradiation in comparison with pure PLA.     

Rhodamine B Photodegradation in Aqueous Solutions Containing Nitrogen Doped TiO2 and Carbon Nanotubes Composites

In this work, new results concerning the potential of mixtures based on nitrogen doped titanium dioxide (TiO₂:N) and carbon nanotubes (CNTs) as possible catalyst candidates for the rhodamine B (RhB) UV photodegradation are reported. The RhB photodegradation was evaluated by UV–VIS absorption spectroscopy using samples of TiO₂:N and CNTs of the type of single-walled carbon nanotubes (SWNTs), double-wall carbon nanotubes (DWNTs), multi-wall carbon nanotubes (MWNTs), and single-walled carbon nanotubes functionalized with carboxyl groups (SWNT-COOH) having various concentrations of CNTs. The best photocatalytic performance was obtained for sample containing TiO₂:N and 2.5 wt.% SWNTs-COOH, when approx. 85% of dye removal was achieved after 300 min. of UV irradiation. The reaction kinetics of RhB aqueous solutions containing TiO₂:N/CNT mixtures followed a complex first-order kinetic model. The TiO₂:N/CNTs catalyst induced higher photodegradation efficiency of RhB than TiO₂:N due to the presence of CNTs, which act as adsorbent and dispersing agent and capture the photogenerated electrons of TiO₂:N hindering the electron–hole recombination.     

Study of Pt/TiO2 nanocomposite for cancer-cell treatment

The increasing incidence of cancer all over the world demands new, effective and secure materials for treatment. In this paper, we propose Pt/TiO₂ nanocomposite for cancer-cell treatment because noble metal nanoparticles are supposed to enhance the photocatalytic activity of TiO₂ nanoparticles. To evaluate the cancer-cell killing effect of our Pt/TiO₂ nanocomposite, TiO₂ and Au/TiO₂ nanoparticles are also introduced. The prepared Pt/TiO₂ nanocomposite are characterized with transmission electron microscopy (TEM) and UV–vis adsorption spectra. Results of cell treatment indicate that Pt/TiO₂ nanocomposite, as extremely stable metal–semiconductor nanomaterial, can exhibit a very high photodynamic efficiency under a mild ultraviolet radiation. And our Pt/TiO₂ nanocomposite shows to be more effective in cancer-cell treatment than TiO₂ and Au/TiO₂ nanoparticles. As a result, Pt/TiO₂ nanocomposite may be supposed to have a promising application for cancer-cell treatment.     

Nanostructured Sn/TiO2/C composite as a high-performance anode for Li-ion batteries

A nanostructured Sn/TiO₂/C composite was prepared from SnO, Ti, and carbon powders using a mechanochemical reduction method and evaluated as an anode material in rechargeable Li-ion batteries. The Sn/TiO₂/C nanocomposite was composed of uniformly dispersed nanocrystalline Sn and rutile TiO₂ in amorphous carbon matrix. In addition, electrochemical Li insertion/extraction in rutile TiO₂ was examined by ex situ XRD and extended X-ray absorption fine structure. The Sn/TiO₂/C nanocomposite exhibited excellent electrochemical performance, which highlights its potential as a new alternative anode material in Li-ion batteries.     

Electrochemical Evaluation of Titanium (IV) Oxide/Polyacrylonitrile Electrospun Discharged Battery Coals as Supercapacitor Electrodes

The TiO₂ nanoparticles are electrospun with polyacrylonitrile (PAN) polymer solution onto the discharged battery coal (DBC) electrode and the results are evaluated as a supercapacitor. The morphology and chemical composition of the synthesized TiO₂ nanoparticles and PAN+TiO₂ nanocomposite fibers were characterized by Scanning electron microscopy, thermogravimetry and FTIR analysis. Supercapacitor measurements and electrochemical characterizations of the electrodes examined by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical measurements showed that the best current value was obtained from PAN and TiO₂ coated DBC. The performances of both PAN and PAN+TiO₂ coated DBC electrodes were investigated as supercapacitors. PAN+TiO₂/DBC showed the best specific capacitance value of 156.00 F g⁻¹ and PAN/DBC showed 74.93 F g⁻¹. In addition, PAN+TiO₂/DBC exhibited reliable stability performance over 2000.00 cycles.     

共聚物模板辅助合成高倍率性能多孔Li2FeSiO4@C/CNTs纳米复合正极材料

通过溶胶-凝胶法制备了Li₂FeSiO₄@C/CNTs(LFS@C/CNTs)纳米复合材料,其中三嵌段共聚物P123用作结构导向剂和碳源,碳纳米管作为导电线提高材料的导电性。LFS@C/CNTs不仅具有海绵状纳米孔,能够与电解液充分接触改善锂离子的传输路径,同时由非晶碳和碳纳米管构成的三维桥联导电网络利于电子的快速传递,提高了材料大电流充放电能力和循环稳定性。复合后的LFS@C/CNTs的高倍率性能相比LFS@C明显提高, 当CNTs的掺量为4%,电压窗口为1.5~4.5 V,0.1C电流密度下放电比容量为182 mAh·g^-1。在10C经70次循环后该材料的放电比容量能保持在117 mAh·g^-1,是LFS@C放电比容量(55 mAh·g^-1)的两倍。     

共聚物模板辅助合成高倍率性能多孔Li2FeSiO4@C/CNTs纳米复合正极材料

通过溶胶-凝胶法制备了Li₂FeSiO₄@C/CNTs(LFS@C/CNTs)纳米复合材料,其中三嵌段共聚物P123用作结构导向剂和碳源,碳纳米管作为导电线提高材料的导电性。LFS@C/CNTs不仅具有海绵状纳米孔,能够与电解液充分接触改善锂离子的传输路径,同时由非晶碳和碳纳米管构成的三维桥联导电网络利于电子的快速传递,提高了材料大电流充放电能力和循环稳定性。复合后的LFS@C/CNTs的高倍率性能相比LFS@C明显提高, 当CNTs的掺量为4%,电压窗口为1.5~4.5 V,0.1C电流密度下放电比容量为182 mAh·g^-1。在10C经70次循环后该材料的放电比容量能保持在117 mAh·g^-1,是LFS@C放电比容量(55 mAh·g^-1)的两倍。     

Ethanol electro-oxidation on catalysts with TiO2 coated carbon nanotubes as support

Pt–TiO₂/CNTs electrocatalysts for direct ethanol fuel cells (DEFCs) were prepared by sol–gel and ethylene glycol reduction method. XRD and TEM showed that the size of the Pt particles on TiO₂/CNTs is 3.5–4 nm and with narrow particle size distribution. HRTEM revealed that a thin layer of uniform amorphous TiO₂ on CNTs was formed and the faces of the Pt crystal on Pt–TiO₂/CNTs catalysts were quite “rough” and “rounded” and some grain bounders and/or twins also appeared. The electrochemical studies using cyclic voltammetry (CV), chronoamperometry and CO stripping voltammetry indicate that Pt–TiO₂/CNTs catalysts have higher electro-catalytic activity and CO-tolerance for ethanol oxidation than Pt/C (20 wt% Pt, E-TEK) and Pt/CNTs catalyst in acid. The Pt/TiO₂ molar ratio was also optimized and proved that 1:1 was the best Pt/TiO₂ molar ratio.     

Photocatalytic performance of silver-modified TiO2 embedded in poly(ethyl-acrylate-co-methyl metacrylate) matrix

The plasmonic Ag-TiO₂ (with 0.5 wt% Ag) photocatalyst was prepared on P25 TiO₂ surface. The presence of AgNPs on the titania was indicated by the UV–vis spectrum, which showed a plasmonic absorbance band in the visible range (λ _max?=?455 nm). XPS measurements suggested that Ag was in metallic (Ag) and in oxide forms on TiO₂. Ag-TiO₂ photocatalyst and TiO₂ were embedded in [poly(ethyl acrylate-co-methyl methacrylate; p(EA-co-MMA)] copolymer to attain mechanically stable, photocatalytically active nanocomposite films. The photooxidation of ethanol was slower on the photocatalyst/polymer nanocomposites, but it could be significantly improved by irradiating them with UV light. The photoaging was applied as a post-preparation treatment to improve the photocatalytic activity of the nanocomposite films. Changed surface morphology and the partial destruction of the polymer were supported by AFM and FTIR results. Contact angle measurements were used to determine the surface free energies of the prepared and the photoaged nanocomposite films.     

Influence of TiO2 on the Chemical,Mechanical, and Gas Separation Properties of Polyvinyl Alcohol-Titanium Dioxide (PVA-TiO2) Nanocomposite Membranes

PVA/TiO₂ nanocomposite membranes developed were investigated for chemical, mechanical, and gas separation properties. PVA/TiO₂ dispersion offers good optical property and less aggregation, as shown by UV-vis photospectroscopy. FT-IR spectra suggest strong interaction between PVA and TiO₂. Mechanical properties of the composite membranes were enhanced by the addition of TiO₂. Permeation results show that the addition of TiO₂ up to 20 wt.% increased the selectivity of gas pairs O₂/N_2, H₂/N_2, H₂/CO₂, and CO₂/N₂ by 60%, 55%, 23%, and 26% respectively, with a corresponding decrease in the permeability. At higher loading of TiO_2, a reverse trend was observed.     

非共价修饰碳纳米管/二氧化钛复合材料的合成及性能

采用溶胶-凝胶法在聚乙烯吡咯烷酮(PVP)非共价修饰的碳纳米管表面均匀沉积二氧化钛粒子制得纳米复合材料。用TEM、XRD、FTIR、N2吸脱附等对复合材料进行了表征。结果表明:纳米二氧化钛纳米粒子均匀沉积在被修饰碳纳米管表面,且二氧化钛为纯锐钛矿晶体结构,没有金红石和板钛矿相。非共价修饰碳纳米管/二氧化钛复合材料具有良好的介孔结构,其孔径分布主要集中在6～10 nm,且比表面积与纯的二氧化钛相比明显增大,在紫外光照射下降解亚甲基蓝,相比纯的二氧化钛和碳纳米管/二氧化钛,具有较高的催化活性。     

Effect of TiO2 nanoparticles on structure and properties of high density polyethylene membranes prepared by thermally induced phase separation method

Polyethylene/TiO₂ membranes were fabricated via thermally induced phase separation (TIPS) method. A set of characterization tests including FE‐SEM, EDX, XRD, DSC, TGA, DMA, mechanical test and relative pure water flux for characterization of membranes were carried out to investigate the effect of TiO₂ nanoparticles on membrane properties. The results of EDX, XRD and TGA analyses confirmed the presence of TiO₂ nanoparticles in the polymer matrix. The results of DSC analysis revealed that the melting point as well as the crystallinity of the membranes increased slightly with increasing TiO₂ content. However, the glass transition temperature of the membranes was not affected by the presence of particles. Addition of nanoparticles also increased storage modulus, loss modulus and tensile strength at break of the membranes due to the stiffness improvement effect of inorganic TiO₂. Finally, it was observed that incorporation of the nanoparticles improved pure water flux of the membranes. Copyright © 2015 John Wiley & Sons, Ltd.     

TiO2 nanoparticles/poly(butylene adipate‐co‐terephthalate) bionanocomposite films for packaging applications

In this present study, biodegradable PBAT nanocomposites containing different weight percentages (1, 3, 5, 7, and 10% w/w) of TiO₂ nanoparticles were prepared by using solvent casting technique, chloroform as a solvent. The microstructure and morphology of the as‐synthesized poly(butylene adipate‐co‐terephthalate) (PBAT)/TiO₂ nanocomposite films were characterized by Fourier‐transform infrared, X‐ray diffraction, scanning electron microscopy, and transmission electron microscope. The thermal degradation of PBAT composites was studied by using thermogravimetric analysis. The mechanical strength of the films was improved by increasing TiO₂ concentration. Tensile strength increased from 32.60 to 63.26 MPa, respectively. Barrier properties of the PBAT/TiO₂ nanocomposites were investigated by using an oxygen permeability tester. The oxygen permeability (oxygen transmission rate) decreased with increasing the TiO₂ nanoparticle concentrations. The PBAT/TiO₂ nanocomposite films showed profound antimicrobial activity against both Gram‐positive and Gram‐negative foodborne pathogenic bacteria, namely, Escherichia coli and Staphylococcus aureus, to understand to the zone of inhibition. These results indicated that filler–polymer interaction is important and the role of the TiO₂ as a reinforcement in the nanocomposites was evident. Copyright © 2017 John Wiley & Sons, Ltd.     

Nanocomposites of poly(l-lactide) and surface-grafted TiO2 nanoparticles: Synthesis and characterization

A new method of surface modification of TiO₂ nanoparticles by surface-grafting l-lactic acid oligomer was developed. The surface-grafting reaction was evaluated by Fourier transformation infrared (FTIR) and thermal gravimetric analysis (TGA). The results showed that l-lactic acid oligomer could be easily grafted onto the TiO₂ nanoparticles surface in the presence of stannous octanoate and the highest amount of grafted polymer was about 8.5% in weight. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) results showed that grafted TiO₂ (g-TiO₂) in chloroform or PLLA matrix approximated to uniform, while unmodified TiO₂ nanoparticles tended to aggregate. The tensile strength of this material was greatly improved by the addition of g-TiO₂ nanoparticles in poly(l-lactide) (PLLA) matrix. The tensile strength of the g-TiO₂/PLLA nanocomposite containing 5 wt.% of g-TiO₂ was 72 MPa, which was 23.1% higher than that of pure PLLA. Even though the incorporation of the TiO₂ nanoparticles into PLLA led to the deterioration of its elongation at break, the g-TiO₂/PLLA nanocomposite also exhibited better ductility than that of TiO₂/PLLA nanocomposite.     

In-situ preparation and electrochromic properties of TiO2/PTPA-HTAN core-shell nanocomposite film

A new star-shaped structure conjugated microporous polymers, poly (2,8,14-tri[4-diphenyl-benzene]-hexaazatrinaphthylene) (PTPA-HATN), was designed and in-situ electrochemically polymerized on the surfaces of FTO electrodes with a directional alignment TiO₂ nanorod array to obtain TiO₂/PTPA-HATN core-shell nanocomposite films. Compared with the PTPA-HATN film, the TiO₂/PTPA-HATN composite film exhibits higher optical contrast and faster response time, with contrast of 57% at 783 nm, coloring time of 3.62 s and discoloring time of 2.55 s (43%, 4.63 s and 4.77 s for PTPA-HATN film, respectively). After 400 cycles, the contrast of nanocomposite film decreased by 28%, while the PTPA-HATN film basically lost its electrochromic properties. A simple three-layer EC prototype device based on TiO₂/PTPA-HATN nanocomposite film constructed with hydrogel electrolyte clearly shows color changes at different voltages. On the one hand, the formation of core-shell porous nanostructure of TiO₂/PTPA-HATN composite film provides a larger ion doping/de-doping interface, shortening the average diffusion length of ions. On the other hand, the large indented polymer-nanorods contact interface makes it difficult for the polymer to detach from the electrode, thus significantly improving the cyclic stability of the composite film.     

Sol–Gel Derived Rh/TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> Nanocomposite Membranes

A porous borosilicate substrate has been coated with base catalysed SiO₂ sol–gel nanoparticles. Onto these were deposited the vapour of titanium isopropoxide, where it reacted with the surface OH groups to give a TiO₂-overcoat. This nanocomposite sol–gel derived TiO₂/SiO₂ membrane was then doped with 1%Rh giving Rh/TiO₂/SiO₂ membranes. These are shown to be coherent and crack-free, to have good permeability and activity in the isomerisation of butanes. It appears that sol–gel chemistry will allow such membranes to be totally engineered at a nm level.