Synthesis of a New Hydrogel,Based on Guar Gum,for Controlled Drug Release

Summary: Guar gum (GG) polymer was crosslinked in order to obtain a new hydrogel. The GG hydrogel has been characterized by means of FT-IR spectroscopy, the determination of the water content, at different pH values, rheological measurements and in vitro release studies. The GG hydrogel shows a maximum water uptake at acid and basic pH values. The mechanical properties are investigated in order to verify the thixotropic behaviour of the material. In vitro release studies are conducted to evaluate the application of the GG hydrogel as a matrix for controlled drug release.     

Thermal stability of collagen in intervertebral disc tissues

The thermal stability of collagen in intervertebral disc tissues was studied using differential scanning calorimetry. It was found that the melting of collagen in a native tissue was complete at 62–75°C (ΔH = 62.4 J/g) under heating excised annulus fibrosus and nucleus pulposus samples. On heating an intact structure up to 80°C, the denaturation of collagen did not occur. It was shown that the degradation of a proteoglycan component in the test tissues had no effect on the thermal stability of collagen.     

Dynamic Exchange in 3D Cell Culture Hydrogels Based on Crosslinking of Cyclic Thiosulfinates

Dynamic polymer materials are highly valued substrates for 3D cell culture due to their viscoelasticity, a time-dependent mechanical property that can be tuned to resemble the energy dissipation of native tissues. Herein, we report the coupling of a cyclic thiosulfinate, mono-S-oxo-4-methyl asparagusic acid, to a 4-arm PEG-OH to prepare a disulfide-based dynamic covalent hydrogel with the addition of 4-arm PEG-thiol. Ring opening of the cyclic thiosulfinate by nucleophilic substitution results in the rapid formation of a network showing a viscoelastic fluid-like behaviour and relaxation rates modulated by thiol content through thiol-disulfide exchange, whereas its viscoelastic behaviour upon application as a small molecule linear crosslinker is solid-like. Further introduction of 4-arm PEG-vinylsulfone in the network yields a hydrogel with weeks-long cell culture stability, permitting 3D culture of cell types that lack robust proliferation, such as human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs). These cells display native behaviours such as cell elongation and spontaneous beating as a function of the hydrogel's mechanical properties. We demonstrate that the mode of dynamic cyclic thiosulfinate crosslinker presentation within the network can result in different stress relaxation profiles, opening the door to model tissues with disparate mechanics in 3D cell culture.     

Electrospun nanofibrous polycaprolactone scaffolds for tissue engineering of annulus fibrosus

The annulus fibrosus comprises concentric lamellae that can be damaged due to intervertebral disc degeneration; to provide permanent repair of these acquired structural defects, one solution is to fabricate scaffolds that are designed to support the growth of annulus fibrosus cells. In this study, electrospun nanofibrous scaffolds of polycaprolactone are fabricated in random, aligned, and round-end configurations. Primary porcine annulus fibrosus cells are grown on the scaffolds and evaluated for attachment, proliferation, and production of extracellular matrix. The scaffold consisting of round-end nanofibers substantially outperforms the random and aligned scaffolds on cell adhesion; additionally, the scaffold with aligned nanofibers strongly affects the orientation of cells.     

Differential sacnning calorimetric examination of the human intervertebral disc: establishment of calorimetric standards of different stages of degeneration

Intervertebral disc (IVD) degeneration is a common orthopaedic disorder with significant social and economic impact. The major pathological changes occur in the structure of anulus fibrosus (AF) and nucleus pulposus (NP). According to previous reports differential sacnning calorimetric (DSC) proved to be a suitable method for the demonstration of thermal consequences of local and global conformational changes in the structure of the human intervertebral discs. According to the present study, the DSC results clearly proved that definitive differences are present between the stages of disc degeneration in calorimetric measures. The structural differences between the stages could be also demonstrated by histology.     

Synthesis and characterization of a multi-sensitive crosslinked injectable hydrogel based on Pluronic

This paper reports the construction of a novel multi-sensitive chemically crosslinked injectable hydrogel with strong mechanical strength by modifying Pluronic F127 responsive against temperature, pH and redox potential. Crosslinked polymer between benzaldehyde grafted Pluronic (P-A) and amine end capped Pluronic having disulfide linkage (P-B) have been synthesized and characterized with 1H NMR spectroscopy and GPC. The hydrogel under physiological conditions significantly altered sol-gel transition behaviors with much lower critical gelation concentrations and temperatures, compared to Pluronic hydrogels. The rheological characterization demonstrated that the moduli of the hydrogels were able to be tuned depending on molecular weight as well as pH, redox and temperature conditions.     

Snapshot of degenerative aging of porcine intervertebral disc: a model to unravel the molecular mechanisms

Larger animal models, such as porcine, have been validated as appropriate models of the human disc with respect to biomechanics and biochemistry. They are advantageous for research as the models are relatively straightforward to prepare and easily obtainable for research to perform surgical techniques. The intention of this study was to quantitatively analyze gene expression for collagen and proteoglycan components of the extracellular matrix and for collagenase (MMP-1) in porcine discs of varying ages (Newborn; 2-3weeks, Mature; 6-9 month, Older; 2-3 years). In this study, we observed that the cell number and GAG (glycosaminoglycan) formation dramatically decreased with aging. Also, gene expression in the annulus fibrosus (AF) and nucleus pulposus (NP) cells changed with aging. The level of MMP-1 mRNA increased with age and both type I, II collagens decreased with age. The level of aggrecan mRNA was highest in the mature group and decreased significantly with aging. In the mature group, MMP-1 expression was minimal compared to the newborn group. In AF cells, type II collagen was expressed at a high level in the mature group with a higher level of aggrecan, when aged NP showed a decrease in type II collagen. The model of IVD degeneration in the porcine disc shows many changes in gene expression with age that have been previously documented for human and may serve as a model for studying changes in IVD metabolism with age. We concluded that the porcine model is excellent to test hypotheses related to disc degeneration while permitting time-course study in biologically active systems.     

High water content clay–nanocomposite hydrogels incorporating guanidinium‐pendant methacrylamide: Tuning of mechanical and swelling properties by supramolecular approach

Novel clay–polymer composite hydrogels with high water content (up to 98 wt %) are developed, in which mechanical properties are reinforced by the formation of multiple ion‐pairs between the polymer chains and clay nanosheets (CNS). When a small amount of guanidinium‐pendant methacrylamide (0.1–0.2 wt %) is copolymerized with a neutral monomer (0.5–2.0 wt %) in an aqueous dispersion of CNS (1.0–3.0 wt %), a self‐standing hydrogel with satisfactory mechanical toughness and elasticity results, despite its high water content (95–98 wt %). The mechanical properties and swelling behaviors of the hydrogels can be tuned by the amount of the guanidinium‐pendant acrylamide. A systematic study indicates that the ion pairs, formed between the guanidinium groups in the polymer chains and the oxyanions on the surfaces of the CNS, serve as crosslinking points in the three‐dimensional network developed in these hydrogels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 839–847     

Elastic, superporous hydrogel hybrids of polyacrylamide and sodium alginate

A novel approach was developed to prepare a superporous hydrogel with superior mechanical and elastic properties. According to this method, a synthetic monomer was polymerized and crosslinked in the presence of a water-soluble alginate polymer. Later in the process, the alginate part of the synthesized hydrogel was treated with metal cations, which resulted in a hydrogel hybrid with an interpenetrating network structure. In this article, a hydrogel hybrid of acrylamide and alginate is highlighted because of its unique swelling and mechanical properties. This hydrogel hybrid shows resilience and a rubbery property in its fully water-swollen state, which not previously been reported. To help understand the underlying mechanism responsible for such unique properties with hydrogel hybrids, the ionotropic gelation of the alginate polymer was also studied in more detail.     

Stimulus-responsive hydrogels made from biosynthetic fibrinogen conjugates for tissue engineering: structural characterization

Nanostructured hydrogels based on "smart" polymer conjugates of poloxamers and protein molecules were developed in order to form stimulus-responsive materials with bioactive properties for 3-D cell culture. Functionalized Pluronic F127 was covalently attached to a fibrinopeptide backbone and cross-linked into a structurally versatile and mechanically stable polymer network endowed with bioactivity and temperature-responsive structural features. Small angle X-ray scattering and transmission electron microscopy combined with rheology were used to characterize the structural and mechanical features of this biosynthetic conjugate, both in solution and in hydrogel form. The temperature at which the chemical cross-linking of F127-fibrinopeptide conjugates was initiated had a profound influence on the mechanical properties of the thermo-responsive hydrogel. The analysis of the scattering data revealed modification in the structure of the protein backbone resulting from increases in ambient temperature, whereas the structure of the polymer was not affected by ambient temperature. The hydrogel cross-linking temperature also had a major influence on the modulus of the hydrogel, which was rationally correlated to the molecular structure of the polymer network. The hydrogel structure exhibited a small mesh size when cross-linked at low temperatures and a larger mesh size when cross-linked at higher temperatures. The mesh size was nicely correlated to the mechanical properties of the hydrogels at the respective cross-linking temperatures. The schematic charts that model this material's behavior help to illustrate the relationship that exists between the molecular structure, the cross-linking temperature, and the temperature-responsive features for this class of protein-polymer conjugates. The precise control over structural and mechanical properties that can be achieved with this bioactive hydrogel material is essential in designing a tissue-engineering scaffold for clinical applications.     

高分子水凝胶在医学领域的研究进展

高分子水凝胶是具有三维网络结构的一种新型材料,吸水溶胀后质地柔软,与生物体组织相似,生物相容性和生物可降解性良好,具有一定的力学性能,因此在医学领域具有重要的应用。本文对高分子水凝胶在医学领域的研究热点进行了归纳总结,并重点阐述了高分子水凝胶在药物输送、组织工程支架、伤口敷料和生物传感器等医学领域应用的最新研究进展,并对其未来发展趋势进行了展望。     

Comprehensive Examination of Mechanical and Diffusional Effects on Cell Behavior Using a Decoupled 3D Hydrogel System

Hydrogels possess several physical and chemical properties suitable for engineering cellular environments for biomedical applications. Despite recent advances in hydrogel systems for cell culture, it is still a significant challenge to independently control the mechanical and diffusional properties of hydrogels, both of which are well known to influence various cell behaviors when using hydrogels as 3D cell culture systems. Controlling the crosslinking density of a hydrogel system to tune the mechanical properties inevitably affects their diffusional properties, as the crosslinking density and diffusion are often inversely correlated. In this study, a polymeric crosslinker is demonstrated that allows for the adjustment of the degree of substitution of reactive functional groups. By using this polymeric crosslinker, the rigidity of the resulting hydrogel is controlled in a wide range without changing the polymer concentration. Furthermore, their diffusional properties, as characterized by their swelling ratios, pore diameters, and drug release rates, are not significantly affected by the changes in the degree of substitution. 3D cell studies using this hydrogel system successfully demonstrate the varying effects of mechanical properties on different cell types, whereas those in a conventional hydrogel system are more significantly influenced by changes in diffusional properties.     

SANS study of hybrid silica aerogels under “in situ” uniaxial compression

We have modified the inorganic silica network of aerogels with polydimethylsiloxane (PDMS), a hydroxyl-terminated polymer, to obtain an organic modified silicate (ORMOSIL). Reactions were assisted by high-power ultrasounds. The resulting gels were dried under supercritical conditions of the solvent to obtain a monolithic sono-aerogel. The mechanical behaviour of these aerogels can be tuned from brittle to rubbery as a function of the organic polymer content. In order to determine the links between the mechanical behaviour and modifications made to the microstructure, SANS (small-angle neutron scattering) experiments were carried out. To measure the intensities under “in situ” uniaxial compression of the aerogel, a specific sample-holder was built. Under uniaxial compression the 2D-diagrams were significantly anisotropic (butterfly pattern), indicating the rearrangement of the polymer. The form factor of these aerogels is described well by two correlation lengths, small microporous silica clusters surrounded by entangled polymer chains of 6 nm average size (blobs), which form a larger secondary level of agglomerates governed by the “frozen-in” elastic constraints.     

Simultaneous measurement of mechanical and surface properties in thermoresponsive, anchored hydrogel films

Hydrogel films have been used extensively in the preparation of biosensors and biomedical devices. The characteristics of the aqueous interface of the polymer layer are significant for the biosensor or device function; likewise, the changing mechanical properties of thermoresponsive polymers are an important feature that affects the polymer behavior. Atomic force microscopy was used here to characterize both the surface and the mechanical properties of polymeric hydrogel films prepared from a thermoresponsive terpolymer of N-isopropylacrylamide and acrylic acid with benzophenonemethacrylate as a photoreactive cross-linker comonomer. The force-distance curves thus obtained were analyzed to assess both the surface forces and the mechanical response that were associated with the hydrogel. These properties were investigated as a function of temperature, in water and in Tris buffer, for different degrees of polymer cross-linking. For samples in water, the distance over which the surface forces were effective was found to remain constant as the temperature was increased from 26 to 42 °C, even though the mechanical response indicated that the samples had been heated past the lower critical solution temperature, or LCST. The bulk of the polymer becomes less soluble above the LCST, although this does not seem to affect the surface properties. This may be due to the segregation of the acrylic acid-rich polymer segments near the gel surface, which is in agreement with reports for related systems.     

Inelastic behaviour of bacterial cellulose hydrogel: In aqua cyclic tests

Hydrogels are finding increasingly broad use, especially in biomedical applications. Their complex structure – a low-density network of microfibrils – defines their non-trivial mechanical behaviour. The focus of this work is on test-based quantification of mechanical behaviour of a bacterial cellulose (BC) hydrogel exposed to cyclic loading. Specimens for the tests were produced using Gluconacetobacter xylinus ATCC 53582 and tested in aqua under uniaxial cyclic loading conditions in a displacement-controlled regime. Substantial microstructural changes were observed in the process of deformation. A combination of qualitative microstructural observations with quantitative force-displacement relations allowed identification of main deformation mechanisms, confirming inelastic behaviour of the BC hydrogel under a loading-unloading-reloading regime. Elastic deformation was accompanied by non-elastic (viscoplastic) deformation in both tension and compression. This study also aims to establish a background for micromechanical modelling of overall properties of BC hydrogels.     

Cationic Modified PVA Hydrogels Provide Low Friction and Excellent Mechanical Properties for Potential Cartilage and Orthopedic Applications

Poly(vinyl alcohol) (PVA) hydrogel is a promising candidate for articular cartilage repair yet restrained by its mechanical strength and tribological property. Current work reports a newly designed PVA-based hydrogel modified by glycerol (g), bacterial cellulose (BC), and a cationic polymer poly (diallyl dimethylammonium chloride) (PDMDAAC), which is a novel cationic strengthening choice. The resultant PVA-g-BC-PDMDAAC hydrogel proves the effectiveness of this modification scheme, with a confined compressive modulus of 19.56 MPa and a friction coefficient of 0.057 at a joint-equivalent load and low sliding speed. The water content, swelling property, and creep behavior of this hydrogel are also within a cartilage-mimetic range. The properties of PVA-based hydrogels before PDMDAAC addition are likewise studied as a cross-reference. Besides, PDMDAAC-modified PVA hydrogel realizes ideal mechanical and lubrication properties with a relatively low PVA concentration (10 wt.%) and facile fabrication process, which lays a foundation for mass production and marketization in the future.     

Synthesis of guar gum-based hydrogel for sugarcane field solid conditioning

The water crisis is increased everywhere in recent years, which has affected the water demand in different sectors like industries, agriculture, residential, etc. The present research aims to the development of superabsorbent polymer (SAP) using bio-material. The hydrogel is synthesized by grafting Guar gum (GG) with methyl methacrylate (MMA) and crosslinking with polyethylene glycol (PEG). The developed GG-based hydrogelwas characterized by various analytical instruments. The Scanning Electron Microscopy (SEM) demonstrated hydrogels havepores of size 50 ​μm–10 ​μm. The Transmission Electron Microscopy (TEM) analysis has shownthat thematerial consists of spherical shapesand particles of size 141.11nm–182.19 ​nm.The Fourier-Transform Infrared Spectroscopy (FTIR) and Thermogravimetric analysis (TGA) study have confirmedthepresence of functional groups of material, and thermal resistivity. The absorption capacity of developed hydrogelwas found to be 110 ​ml per gram (110% of its dry weight). The hydrogelwasapplied in the field of sugarcane crop and measured soil moisture content after 20 days of application. A better resultwas found of moisture content in the area of hydrogel application (28%) compared to the area without hydrogel application (10%). Moreover, the comparison of different hydrogels is also shown in a study, and the developed hydrogel proves good moisture retention capacity. This technology could be promising in terms of improving perennial crop productivity and combating moisture stress in agriculture. As a soil conditioning material for agricultural applications, the synthesized hydrogel showed tremendous potential.     

Thermal and non-thermal effects of nonablative IR laser irradiation of the collagen of annulus fibrosus tissues

Collagen modifications in the tissues of an annulus fibrosus under moderate-intensity IR laser irradiation at various pulse durations and frequencies were studied. Changes at various levels of the ordered structural hierarchy of collagen in tissues were detected by differential scanning calorimetry, multiphoton microscopy with second harmonic generation, and cross-polarized optical coherence tomography. The obtained data confirm the photothermal and photomechanical effect of IR laser action on fibrous structures. Details of these effects (mechanical defect formation or protein denaturation) were determined, and the greatest tissue damage was demonstrated to be generated by their combined action.     

高强度PAMPS-PAAm互穿网络凝胶及其溶胀性能

通过考察不同单体浓度或离子强度下凝胶的力学性能和溶胀特性,对聚2-丙烯酰胺-2-甲基丙磺酸(PAMPS)与聚丙烯酰胺(PAAm)形成的互穿网络凝胶的高强度性能和作用机理进行了研究.结果表明:PAMPS-PAAm互穿网络凝胶的力学强度对c(AMPS)存在一个最佳值(1 mol/L),且随c(AAM)的增大而显著增大(0.5～4 mol/L).当c(AMPS)=1 mol/L、c(AAM)＝4 mol/L时,互穿网络凝胶的最大抗压强度达6.46 MPa;改变凝胶体系内水的离子强度,PAMPS-PAAm凝胶在0.25 mol/kg离子强度时的抗压强度与纯水状态下相比增加了29%.     

Mussel-inspired chemistry in producing mechanically robust and bioactive hydrogels as skin dressings

The development of hydrogels as skin dressings demonstrates a great potential in real life applications. To achieve this, the hydrogel has to conquer its natural poor mechanical strength, and to prolong its lifetime, antifatigue and self-healing properties originating from dynamic interactions are also required. As skin dressings, the hydrogel needs to maintain its ductility while pursuing the above mentioned properties. In this work, poly(ethylene glycol) diacrylate is used to produce skin dressings by reinforcing poly(ethylene glycol) diacrylate/alginate double network hydrogels with a crosslinker from mussel-inspired chemistry, which is 3,4-dihydroxy-l-phenylalanine. This crosslinking methodology significantly improved mechanical strength of the hydrogel, with 11,200% increase in compressive failure strength; it endowed the hydrogel with outstanding antifatigue and training strengthening properties that makes its mechanical strength increasing in a 50 cycles compressive test; the hydrogel showed excellent self-healing properties that in rheological characterization; it also displayed enhanced storage modulus after withstanding a shear strain up to 1100%; meanwhile, the hydrogel exhibited extreme ductility with an elastic modulus of only 10.90–16.53 kPa. 3,4-dihydroxy-l-phenylalanine also renders the hydrogel its inherent antioxidant activity, conductivity, and bioadhesiveness. Together with the highly transparent appearance, the hydrogels possess a great potential and practibility in the fields of skin dressings.