Phase Behaviour of Poly(styrene-co-methacrylic acid)/ Poly(styrene-co-N,N-dimethylacrylamide)/Poly(styrene-co-4-vinylpyridine) Ternary Blends by DSC and FTIR

Summary: we have investigated by DSC and FTIR the miscibility and phase behaviour of binary and ternary blends of different ratios of poly(styrene-co-methacrylic acid) containing 15 mol% of methacrylic acid (SMA15) with poly(styrene-co-N,N-dimethylacrylamide) containing 17 mol% of N,N,-dimethylacrylamide (SAD-17) and poly(styrene- co-4-vinylpyridine) containing 15 mol% of 4-vinylpyridine. SMA15 is miscible with both SAD17 and S4VP15 and interacts more strongly with S4VP15 than with SAD17 as evidenced by the positive deviations from linear average line observed with these blends and the appearance of new bands in the 1800–1550 cm⁻¹ region. This behaviour is known as ΔK effect. The FTIR study confirms that though the specific intermolecular interactions that occurred with each pair of the SMA15/S4VP15 and SMA15/SAD17 binary components are of different strength, they still exist in the ternary blend. Even though the three binary polymer pairs are individually miscible, the ternary system of SMA15/S4VP15/SAD17 exhibits only partial miscibility with small loop of immiscibility due to a significant ΔK effect. These results obtained by DSC and FTIR are in a fair agreement with theoretical prediction applying the Painter-Coleman association model.     

Interpolymer complexes of poly(acrylic acid) with poly(2-hydroxyethyl acrylate) in aqueous solutions

Complexes formed from poly(acrylic acid) and poly(2-hydroxyethyl acrylate) were studied in aqueous solutions by viscometric, turbidimetric, FTIR spectroscopic, and thermogravimetric analysis methods. The formation of interpolymer complexes stabilized by hydrogen bonds was observed. It was found that the compositions of these interpolymer complexes are strongly dependent on the concentration of polymers, the order of mixing the solutions, and the pH. It was demonstrated that the complexation ability of poly(2-hydroxyethyl acrylate) is relatively low compared to other known nonionic water-soluble polymers. However, it can be significantly increased via hydrophobic modification of the poly(acrylic acid) using cetyl pyridinium bromide.     

Miscibility of poly(vinyl methyl ether) and poly(styrene-co-2-vinylnaphthalene) blends by FT-IR spectroscopy and Tg measurements

Miscibility of blends consisting of poly(vinyl methyl ether) (PVME) and poly(styreneco-2-vinylnaphthalene) [P(S-co-2VN)] was investigated by means of Fourier transform infrared (FT-IR) spectroscopy and thermal analysis. Copolymers containing 21, 51, and 84 wt % of styrene were synthesized by radical polymerization. Based on optical clarity and glass transition temperatures, it was shown that the miscibility in P(S-co-2VN)/PVME blends is largely affected by compositions of the copolymers as well as concentrations of the blend. From the FT-IR results, the relative intensity at 1100 cm^?1 peak of COCH₃ band of PVME and the position of naphthyl ring of 2VN were sensitive to the miscibility of the blends. It was observed that blends of PVME with P(S-co-2VN) of 84 wt % styrene or P(S-co-2VN) of 51 wt % styrene are miscible over the entire concentration ranges of the blends. Blends of PVME with P(S-co-2VN) containing 21 wt % of styrene are immiscible below 65 wt % PVME. In the miscible P(S-co-2VN)/PVME blends, there was observed a large shift in the naphthyl frequency at a characteristic wavelength of 748 cm^?1. © 1993 John Wiley & Sons, Inc.     

Polymerization of acrylates by atom transfer radical polymerization. Homopolymerization of 2-hydroxyethyl acrylate

The application of atom transfer radical polymerization (ATRP) to the homopolymerization of 2-hydroxyethyl acrylate, a functional monomer, is reported. The polymerizations exhibit first-order kinetics, and molecular weights increase linearly with conversion. Polydispersities remain low throughout the polymerization (M_w/M_n ≈ 1.2). Reactions were conducted in bulk and in 1 : 1 (by volume) aqueous solution; the latter demonstrates the resilience of ATRP to protic media. Analysis of poly(2-hydroxyethyl acrylate) by MALDI-MS and ¹H-NMR shows M_n,exp to be much closer to M_n,th than those observed by SEC using polystyrene standards. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1417–1424, 1998     

Poly[2-(N,N-Dimethylamino) Ethyl Methacrylate] /Poly(Styrene-Co-Methacrylic Acid) Interpolymer Complexes

Summary: Poly[2-(N,N-dimethylamino)ethyl methacrylate] (PDMAEMA), copolymers of different compositions of styrene with 2-(N,N-dimethylamino)ethyl methacrylate (SDMAEMA) or methacrylic acid (SMA) were synthesized by free radical polymerization and characterized by several techniques. Different ternary mixtures containing proton-acceptors PDMAEMA or SDMAEMA, proton-donor copolymers SMA and a solvent (butan-2-one or THF) were prepared. The present study, that investigated several factors that affected the phase behaviors of the ternary mixtures above, confirmed that, indeed depending on the nature of solvent, densities of interacting species, amounts of efficient specific interactions that occurred between the two copolymers, interpolymer complexes of different structures were elaborated. The complexation phenomena, observed with these different systems were analyzed in solution by viscometry that confirmed these effects in monitoring the formation of interpolymer complexes. The specific interactions that occurred between pairs of polymers of each system above were qualitatively evidenced by FTIR spectroscopy from the appearance of new bands or their new redistribution. The glass transition temperature Tg of the obtained complexes of different structures determined by DSC varied differently with the weight fraction of one of the copolymers. These various Tg-compositions were analyzed using the Kwei and Brostow et al. approach recently developed. Thermal analysis of some of the elaborated complexes, examined by thermogravimetry, confirmed their improved thermal stability.     

Miscibility and Thermal Behaviour of Poly(styrene-co-itaconic acid)/Poly(butyl methacrylate-co-4-vinylpyridine) Mixtures. Accessibility and Self-Association Effects

Summary: The miscibility and thermal behaviour of binary mixtures of poly(styrene-co-itaconic acid) containing 11 or 27 mol % of itaconic acid (PSIA-11 or PSIA27) with poly(butyl methacrylate) (PBMA)or poly(butyl methacrylate-co-4-vinylpyridine) containing 10 or 26 mol% of 4-vinylpyridine (PBM4VP-10, PBM4V-P26) were investigated by differential scanning calorimetry, scanning electron microscopy, FTIR spectroscopy and thermogravimetry. The results showed that 11 mol % of itaconic acid and 10 mol % of 4-vinylpyridine respectively introduced within the polystyrene and poly(butyl methacrylate) matrices induced the miscibility of this pair of polymers due to specific interactions of hydrogen bonding type with partial pyridine protonation that occurred between the two copolymers as evidenced by FTIR from the appearance of two new bands at 1607 cm⁻¹ and 1640 cm⁻¹. Increasing itaconic acid content from 11 to 27 mol % led to a decrease of the intensity of the specific interactions within PSIA-27/PBM4VP blends and is attributed to both accessibility and self association effects as evidenced by DSC from the change of the shape of the Tg- composition curves and by FTIR spectroscopy. As shown from the thermogravimetric study, the presence of these specific interactions delayed the anhydride formation and improved the thermal stability of the blends.     

聚(丙烯酸钠-4-乙烯基吡啶)的生物降解性和功能性研究

用自由基共聚法制备了一系列可生物降解的功能聚合物聚(丙烯酸钠-4-乙烯基吡啶)[P(SA-co-4VP)],研究了其组成和分子量与生物降解性、资合性及分散性间的关系.结果表明:聚合物中小乙烯基吡啶含量越大,P(SA-co-4VP)的生物降解越显著.分子是一定时,少量的个乙烯基吡啶引入聚丙烯酸钠主链是增强聚合物生物降解性和保持原有功能特性的有效途径.     

A novel route to poly(2-hydroxyethyl methacrylate) and its amphiphilic block copolymers

The vinyl of the ester group of 2-vinyloxyethyl methacrylate was first selectively reacted with acetic acid to obtain 2-[1-(acetoxy)ethoxy]ethyl methacrylate ( 2 ). This protected monomer was subjected to anionic polymerization in tetrahydrofuran at −60°C in the presence of LiCl, using 1,1-diphenylhexyllithium as initiator. The molecular weight of the polymer could thus be controlled and a narrow molecular weight distribution obtained. The protecting group, 1-(acetoxy)ethyl, could be easily eliminated (by quenching the polymerization reaction with methanol and water) to generate poly(2-hydroxyethyl methacrylate) (poly(HEMA)). Block copolymers were also prepared by the sequential anionic polymerization of MMA and 2 or styrene and 2 . They possess narrow molecular weight distributions, and controlled molecular weights and compositions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1865–1872, 1998     

Preparation,characterization and thermal stability of poly[2-(Dimethylamino)ethyl acrylate]

Poly[2-(dimethylamino)ethyl acrylate] (PDAEA) and polymer complexes of 2-(dimethylamino)ethyl acrylate (DAEA) with nickel(II), copper(II), iron(III) and cobalt(II) chlorides were prepared and characterized by means of IR, electronic spectra and elemental analysis. The thermal stability of the homopolymer was compared with those of the polymer complexes, and the order of stability was given. The activation energies of the polymer complexes were calculated.     

Miscibility of Halogen-containing Polymethacrylates with Various Poly(alkyl acrylate)s

The miscibility behavior of a series of halogen-containing polymethacrylates with poly(methyl acrylate), poly(ethyl acrylate), poly(n-propyl acrylate) and poly(n-butyl acrylate) was investigated by differential scanning calorimetry and for lower critical solution temperature (LCST) behavior. Poly(chloromethyl methacrylate), poly(1-chloroethyl methacrylate), poly(2-chloroethyl methacrylate), poly(2,2-dichloroethyl methacrylate), poly(2,2,2-trichloroethyl methacrylate), poly(2-fluoroethyl methacrylate) and poly(1,3-difluoroisopropyl methacrylate) are miscible with some of the poly(alkyl acrylate)s. Most of the miscible blends show LCST behavior. However, poly(3-choloropropyl methacrylate), poly(3-fluoropropyl methacrylate), poly(4-fluorobutyl methacrylate), poly(1,1,1,3,3,3-hexafluoroisopropyl methacrylate), poly(2-bromoethyl methacrylate) and poly(2-iodoethyl methacrylate) are immiscible with any of the poly(alkyl acrylate)s studied. © 1997 John Wiley & Sons, Ltd.     

Characteristic ratio of poly(tetrahydrofurfuryl acrylate) and poly(2-ethylbutyl acrylate)

The synthesis, characteristic ratio C_∞ and glass transition temperature (T_g) of poly(tetrahydrofurfuryl acrylate) (PTHFA) and of poly(2-ethylbutyl acrylate) (P2EBA) are reported. P2EBA has slightly lower flexibility (C_∞ = 9.2) than PTHFA (C_∞ = 8.6), mainly because of the higher bulkiness of its side group and the closer proximity to the main chain. The C_∞ results compared with the corresponding polymethacrylates show an increase in flexibility due to the absence of the α-methyl group. Comparison with poly(methyl acrylate) clearly shows the influence of the bulkiness of the side group on the chain flexibility. The lower T_g of P2EBA than that of PTHFA may be explained by the higher flexibility of the 2-ethylbutyl side group. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1589–1592, 1997     

Nanodomains in a hydrophilic-hydrophobic IPN based on poly(2-hydroxyethyl acrylate) and poly(ethyl acrylate)

The morphology of a series of hydrogels based on the interpenetration of poly(2-hydroxyethyl acrylate) and poly(ethyl acrylate) has been studied through transmission electron microscopy, TEM, atomic force microscopy, AFM, and dynamic-mechanical spectroscopy, DMA. For the TEM analysis phosphotungstic acid, PTA, was used as alternative selective staining agent to those commonly used. The good agreement between TEM and AFM images allowed us to confirm that the PTA technique is a very powerful tool for TEM analysis of these hydrogel systems. All the results show that the IPNs presented phase-separation with two kinds of microdomains: those preferentially with a hydrophilic nature and those with preferentially a hydrophobic one, of sizes that range from 30 nm to 100 nm. Each one of these domains is composed by smaller nanodomains of alternating hydrophobic and hydrophilic component ranging between 6 and 10 nm sizes, those preferentially with a hydrophilic nature having a larger proportion of hydrophilic nanodomains. The AFM images of the IPN with the highest PHEA mass fraction, x_PHEA = 0.75, suggest that the hydrophilic phase is co-continuous in the material. A disperse hydrophilic phase is found when the PHEA mass fraction is reduced up to x_PHEA = 0.38. This phase-separation is explained in terms of some characteristic parameters of the networks such as the mesh size and the number of units between cross-links. The morphology found makes the systems very attractive for cell adhesion substrates and for matrices of scaffolds in soft tissue engineering.     

Synthesis and characterization of poly(butylene terephthalates) modified by hydroquinone bis(2-hydroxyethyl)ether

A series of thermoplastic poly(butylene-co-hydroquinone bis(2-hydroxyethyl)ether terephthalates) (PBHT), with different molar ratios of hydroquinone bis(2-hydroxyethyl)ether (HQEE)/1,4-butanediol 9/91, 18/82 and 27/73, were synthesized via melt polycondensation. The compositions, thermodynamics and crystallization properties of the obtained copolyesters were characterized in detail by ¹H NMR, differential scanning calorimeters (DSC), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). These results showed that the PBHTs were successfully synthesized, and the incorporation of the HQEE group significantly improved thermal properties of the polymers. However, HQEE did not change the crystal structure of PBT. The T_m values of the copolymers decreased (from 208?°C to 174?°C) with increasing content of HQEE segments, on the contrary, T_g values increased (from 37?°C to 43?°C). The temperatures for 5% weight loss did not decrease and appeared at a range of 373–377?°C.     

Miscibility study in the blends of novel poly (styrene-co-4-vinylphenyldimethylsilanol) and poly (n-butyl methacrylate)

The miscibility of poly (styrene-co-4-vinylphenyldimethylsilanol) (ST-VPDMS) and poly (n-butyl methacrylate) (PBMA) blends has been investigated by means of DSC and FT-IR spectroscopy. It was found that miscible blends were formed only for the copolymers containing 9–34 mol % 4-vinylphenyldimethylsilanol (VPDMS). The glass transition behavior of the miscible blends was analyzed by recently proposed equations in terms of the physical meaning of the fitting parameters. The results of FT-IR study were found to be fully consistent with the observation of the miscibility window obtained from glass transition temperature measurements. Quantitative information concerning intermolecular hydrogen bond interaction in the carbonyl stretching vibration region of the miscible blends was obtained by curve-fitting method. © 1994 John Wiley & Sons, Inc.     

Miscibility window for the blends of poly(styrene-co-4-vinylphenymethylphenylsilanol) with poly(n-butyl methacrylate)

Polymer blends consisting of poly(styrene-co-4-vinylphenylmethylphenylsilanol) (ST-VPMPS) and poly(n-butyl methacrylate) (PBMA) have been investigated. The experimental results showed that miscible blends were formed when ST-VPMPS copolymers contained 9–56 mol % silanol functional groups. Comparison of the results with poly(styrene-co-4-vinylphenyldimethylsilanol) (ST-VPDMS)/PBMA blends revealed that the miscibility window was shifted to a higher silanol composition in the present system in which a stronger hetero-associated hydrogen bonding interaction was present. The results were discussed in terms of steric shielding and electron-withdrawing effects of the phenyl substituent bound directly to the silicon atom. © 1996 John Wiley & Sons, Inc.     

聚（丙烯酸—2—羟乙酯）与二氧化硅的原位复合

有机聚合物（或其活性单体）参与的硅酸盐的溶胶一凝胶（SOI－g61）过程是达到聚合物与SIO。微观甚至纳米复合的一条良好途径［‘”］．目前多以普通的硅酸盐为先驱物，它们在sol－gel过程中脱出的醇皆为低分子化合物，并且是非活性的，不能进一步形成聚合物，需加以去除，从而在制备过程中引起大的收缩（体积收缩达50％以上），导致材料包含大量气孔甚至发生开裂，且要求很长的制备周期（数周至数月）［‘’．如果硅酸盐在水解／缩合过程中脱出的醇带有可聚合的活性基因，即可原位生成材料的一部分，使体系收缩率大幅度下降．基于此，本…     

Interpolymer Complexes of Poly(N,N-Dimethylacrylamide/Poly(Styrene-co-Acrylic Acid): Thermal Stability and FTIR Analysis

Summary: This contribution will focus on the elaboration and characterizations of new materials with optimal properties as interpolymer complexes, upon mixing poly (styrene-co-acrylic acid containing 18, 27 and 32 mol % of acrylic acid (SAA-x) and poly (N,N-dimethylacrylamide) (PDMA), through the control of the densities, strength, self-association and accessibility of the interacting species. These elaborated interpolymer complexes, of different structures, investigated by DSC and TGA, exhibited a significant improved thermal stability. Their DSC analysis showed that all these materials showed one composition-dependence glass transition temperature Tg, indicating the formation of a single homogeneous phase. The different behaviors of Tg-initial composition observed with these systems were analyzed by the approaches of Kwei and Brostow et al., recently developed. The specific interactions that occurred within the elaborated materials were evidenced qualitatively by ATR/FTIR spectroscopy, from the appearance of new bands in the 1800–1550 cm⁻¹ region.