Synthesis and characterization of serial random and block-copolymers based on lactide and glycolide

The objective of this study is to investigate the properties of poly(lactide-co-glycolide) with different composition ratios and PLGA-PEG-PLGA copolymers synthesized by ring-opening polymerization method. Their compositions, crystallization properties, thermal and degradation behaviors, hydrophilicity and biocompatibility were studied. Our results demonstrate that poly(lactide-co-glycolide) with a 90% lactide and PLGA-PEG-PLGA show some crystallization properties. While as the decrease of lactide content in polymers, poly(lactide-co-glycolide) become amorphous, whereas, their hydrophilicity have been improved on the contrary. Compared to poly(lactide-co-glycolide), the PLGA-PEG-PLGA copolymer has a better hydrophilicity for the existence of polyethylene glycol block. Furthermore, both these polymers display easy controlled degradation properties and good cell compatibility.     

Synthesis and characterization of poly(succinimide-co-6-aminocaproic acid) by acid-catalyzed polycondensation of L-aspartic acid and 6-aminocaproic acid

The polycondensation of L -aspartic acid ( ASP ) with 6-aminocaproic acid ( ACA ) using o-phosphoric acid produced poly(succinimide-co-6-aminocaproic acid). The yield of the MeOH-insoluble copolymer decreased from 99 to 52% and that of the MeOH-soluble one increased from 9 to 47%, with increasing molar ratio of ACA in the monomer feed. The compositions of the succinimide ( SCI ) unit in the MeOH -insoluble and -soluble copolymers tended to be higher than those of ASP in the monomer feed. The copolymers with the 35 mol % SCI units or above were soluble in DMSO , DMF , and conc- H₂SO₄ , but those with the 20 and 21 mol % SCI units were soluble only in conc-H₂SO₄. The melting temperature appeared for the copolymers with less than 76 mol % SCI units. Poly(succinimide-co-6-aminocaproic acid) was easily hydrolyzed to yield poly(aspartic acid-co-6-aminocaproic acid), and it exhibited biodegradability toward activated sludge. © 1997 John Wiley & Sons, Inc.     

Synthesis of Poly(glutamic acid-co-aspartic acid) via Combination of N-carboxyanhydride Ring Opening Polymerization with Debenzylation简

The random copolymers of glutamic acid （LG） and aspartic acid （ASP）, poly（LG-co-ASP）, with designed compositions could be successfully synthesized via combination of N-carboxyanhydride ring opening copolymerization with debenzylation. Ring opening copolymerizations of y：benzyl-L-glutamate N-carboxyanhydride （BLG-NCA） and β-benzyl-Laspartate N-carboxyanhydride （BLA-NCA） were carried out by using different amines including triethylamine （TEA）, diethylamine, n-hexylamine （NHA）, triphenylamine, diphenylamine or aniline as initiators. All the 6 amines were highly efficient to get well-defined poly（BLG-co-BLA） copolymers with designed compositions although the polymerizations proceeded via different mechanisms （normal amine mechanism or/and activated monomer mechanism）, which are based on chemical structure of amines. The molecular weights of poly（BLG-co-BLA） copolymers could be mediated by both TEA concentration and polymerization time. Then, debenzylation ofpoly（BLG-co-BLA） copolymers was conducted to prepare the corresponding hydrophilic random eopolymers of poly（LG-co-ASP） with a-subunit structure in ASP structural units. The contents of LG structural units in poly（LG-co-ASP） copolymers matched with those of BLG-NCA in NCA-monomer feeds in ring opening copolymerizations initiated by NHA or TEA and were closed to the theoretical line. The diblock copolymer of poly（BLG-b-BLA） could also be synthesized via living NCA ring opening copolymerization by sequential addition of BLG- NCA and BLA-NCA.     

Synthesis and characterization of biodegradable poly(L-aspartic acid-co-PEG)

The melt polycondensation reaction of the prepolymer prepared from N-(benzyloxycarbonyl)-L -aspartic acid anhydride (N-CBz-L -aspartic acid anhydride) and low molecular weight poly(ethylene glycol) (PEG) using titanium isopropoxide (TIP) as a catalyst produced the new biodegradable poly(L -aspartic acid-co-PEG). This new copolymer had pendant amine functional groups along the polymer backbone chain. The optimal reaction conditions for the preparation of the prepolymer were obtained by using a 0.12 mol % of p-toluenesulfonic acid with PEG 200 for 48 h. The weight-average molecular weight of the prepolymer increased from 1,290 to 31,700 upon melt polycondensation for 6 h at 130°C under vacuum using 0.5 wt % TIP as a catalyst. The synthesized monomer, prepolymer, and copolymer were characterized by FTIR, ¹H- and ¹³C-NMR, and UV spectrophotometers. Thermal properties of the prepolymer and the protected copolymer were measured by DSC. The glass transition temperature (T_g) of the prepolymer shifted to a significantly higher temperature with increasing molecular weight via melt polycondensation reaction, and no melting temperature was observed. The in vitro hydrolytic degradation of these poly(L -aspartic acid-co-PEG) was measured in terms of molecular weight loss at different times and pHs at 37°C. This pH-dependent molecular weight loss was due to a simple hydrolysis of the backbone ester linkages and was characterized by more rapid rates of hydrolysis at an alkaline pH. These new biodegradable poly(L -aspartic acid-co-PEG)s may have potential applications in the biomedical field. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2949–2959, 1998     

Synthesis and drug controlled release of block copolymers of poly(l-lactide) with poly(d,l-lactide) and related monomers

Four types of new biodegradable block copolymers AB, ABA, AC and AD, where A is poly(L-lactide) (PLLA), B is poly(D, L-lactide) (PDLLA), C is poly(p-dioxanone) (PDON) and D is poly(ϵ-caprolactone) (PCL) with different block lengths were synthesized and characterized by GPC, IR, ¹H-NMR and DSC. There are phase-separated and biodegradable block copolymers. Their in vitro biodegradation rates with the change of composition ratio were studied as well as the biodegradation rates of homopolymers with the series as PDON > PDLLA > PLLA in parallel with their crystallinities, i.e. from amorphous to semicrystalline. All these block copolymers were used as matrix to test their controlled release behavior of levo-norgestrel (LNG) in the form of microspheres through solvent evaporation preparation with thoroughly long-time washing to minimize the generally occurring bursting effect. As a result all of them showed almost constant rate of release even from the initial stage,     

Influence of feeding strategies of mixed microbial cultures on the chemical composition and microstructure of copolyesters P(3HB‐co‐3HV) analyzed by NMR and statistical analysis

NMR spectroscopy was applied for quantitative and qualitative characterization of the chemical composition and microstructure of a series of poly(3‐hydroxybutyrate‐co‐3‐hydoxyvalerate) copolymers, P(3HB‐co‐3HV), synthesized by mixed microbial cultures at several different feeding strategies. The monomer sequence distribution of the bacterially synthesized P(3HB‐co‐3HV) was defined by analysis of their high‐resolution 1D ¹³C NMR and 2D ¹H/¹³C HSQC and ¹H/¹³C HMBC NMR spectra. The results were verified by employment of statistical methods and suggest a block copolymer microstructure of the P(3HB‐co‐3HV) copolymers studied. Definitive distinction between block copolymers or a mixture of random copolymers could not be achieved. NMR spectral analysis indicates that the chemical composition and microstructure of the copolymers can be tuned by choosing a correct feeding strategy. Copyright © 2009 John Wiley & Sons, Ltd.     

Temperature‐induced spontaneous sol–gel transitions of poly(D,L‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L‐lactic acid‐co‐glycolic acid) triblock copolymers and their end‐capped derivatives in water

The spontaneous hydrogel formation of a sort of biocompatible and biodegradable amphiphilic block copolymer in water was observed, and the underlying gelling mechanism was assumed. A series of ABA‐type triblock copolymers [poly(D,L ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L ‐lactic acid‐co‐glycolic acid)] and different derivatives end‐capped by small alkyl groups were synthesized, and the aqueous phase behaviors of these samples were studied. The virgin triblock copolymers and most of the derivatives exhibited a temperature‐dependent reversible sol–gel transition in water. Both the poly(D,L ‐lactic acid‐co‐glycolic acid) length and end group were found to significantly tune the gel windows in the phase diagrams, but with different behaviors. The critical micelle concentrations were much lower than the associated critical gel concentrations, and an intact micellar structure remained after gelation. A combination of various measurement techniques confirmed that the sol–gel transition with an increase in the temperature was induced not simply via the self‐assembly of amphiphilic polymer chains but also via the further hydrophobic aggregation of micelles resulting in a micelle network due to a large‐scale self‐assembly. The coarsening of the micelle network was further suggested to account for the transition from a transparent gel to an opaque gel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1122–1133, 2007     

Fluorinated block copolymers containing poly(vinylidene fluoride) or poly(vinylidene fluoride‐co‐hexafluoropropylene) blocks from perfluoropolyethers: Synthesis and thermal properties

PFPE‐b‐PVDF and PFPE‐b‐poly(VDF‐co‐HFP) block copolymers [where PFPE, PVDF, VDF, and HFP represent perfluoropolyether, poly(vinylidene fluoride), vinylidene fluoride (or 1,1‐difluoroethylene), and hexafluoropropylene] were synthesized by radical (co)telomerizations of VDF (or VDF and HFP) with an iodine‐terminated perfluoropolyether (PFPE‐I). Di‐tert‐butyl peroxide (DTBP) was used and was shown to act as an efficient thermal initiator. The numbers of VDF and VDF/HFP base units in the block copolymers were assessed with ¹⁹F NMR spectroscopy. According to the initial [PFPE‐I]₀/[fluoroalkenes]₀ and [DTBP]₀/[fluoroalkenes]₀ molar ratios, fluorinated block copolymers of various molecular weights (1500–30,300) were obtained. The states and thermal properties of these fluorocopolymers were investigated. The compounds containing PVDF blocks with more than 30 VDF units were crystalline, whereas all those containing poly(VDF‐co‐HFP) blocks exhibited amorphous states, whatever the numbers were of the fluorinated base units. All the samples showed negative glass‐transition temperatures higher than that of the starting PFPE. Interestingly, these PFPE‐b‐PVDF and PFPE‐b‐poly(VDF‐co‐HFP) block copolymers exhibited good thermostability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 160–171, 2003     

Target grafting of poly(2-(dimethylamino)ethyl methacrylate) to biodegradable block copolymers

A series of copolymers composed of methoxy poly(ethylene glycol) and a hydrophobic block of poly(ɛ-caprolactone-co-propargyl carbonate) grafted with poly(2-[dimethylamino]ethyl methacrylate) was synthesized by combining ring opening polymerization, azide-alkyne click reaction, and atom transfer radical polymerization (ATRP). Well-defined copolymers with a target composition and a tailored structure were achieved via the grafting from approach by using a single catalytic system for both click reaction and ATRP. Kinetic studies demonstrated the controlled/living character of the employed polymerization methods. The thermal properties and self-assembly in aqueous medium of the graft copolymers were dependent on their composition. The resulting polymeric materials showed low cytotoxicity toward L929 cells, demonstrating their potential for biomedical applications. This type of materials containing cationic side chains tethered to biocompatible and biodegradable segments could be the basis for promising candidates as drug and gene delivery systems.     

Synthesis,Characterization and Aqueous Solution Behavior of a pH-responsive Double Hydrophilic Block Copolymer

The pH-responsive double hydrophilic block copolymer poly(ethylene glycol)-b-poly(methacylic acid-co-4-vinyl benzylamine hydrochloride salt) (PEG-b-PMAA/PVBAHS) was synthesized. A series of PEG-b-PMAA/PVBAHS with different molecule weights and compositions were characterized by IR, ¹H-NMR, elemental analysis and TGA. With different MAA/VBAHS ratio, the PEG-b-PMAA/PVBAHS copolymers had the different isoelectric point (IEP). Supermolecular structures of the block copolymers could be formed by the interionic interactions at different solution pH. Experiment results showed that the structures of the pH-responsive copolymers in aqueous solution could be changed at different pH environments. The aggregation of this double hydrophilic block copolymer in aqueous solution was determined by both of solution pH and copolymer composition.     

Synthesis and isodimorphic cocrystallization behavior of poly(1,4-cyclohexylenedimethylene terephthalate-co-1,4-cyclohexylenedimethylene 2,6-naphthalate) copolymers

A series of poly(1,4-cyclohexylenedimethylene terephthalate-co-1,4-cyclohexylenedimethylene 2,6-naphthalate) [P(CT-co-CN)] copolymers were synthesized, and their cocrystallization behavior was investigated using differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). Although the P(CT-co-CN) copolymers synthesized have statistical random distribution of CT and CN units, all the copolymers show clear melting and crystallization peaks in DSC thermograms over entire copolymer composition, and have an eutectic melting temperature in the plot of melting temperature versus copolymer composition. WAXD patterns of all the samples show sharp diffraction peaks, and are largely divided into two classes according to the copolymer composition, that is, PCT-type and PCN-type diffraction patterns. These facts lead us to conclude that P(CT-co-CN) copolymers show isodimorphic cocrystallization. The eutectic composition at which the crystal transition from PCT-type to PCN-type crystal occurs was estimated ca. 40 mol % CN content. When the defect Gibbs free energy was estimated by using the equilibrium inclusion model proposed by Wendling and Suter, the value (7.18 kJ/mol) in the case of incorporation of CT units in the PCN crystals were larger than the case (3.32 kJ/mol) of incorporation of CN units in the PCT crystals. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 177–187, 2004     

Synthesis of gradient copolymers with complexing groups by RAFT polymerization and their solubility in supercritical CO2

We report the synthesis of new gradient fluorinated copolymers with complexing groups and soluble in supercritical carbon dioxide (scCO₂). Poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐acetoacetoxyethyl methacrylate) (poly(FDA‐co‐AAEM)) and poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐vinylbenzylphosphonic acid diethylester) (poly(FDA‐co‐VBPDE)) gradient copolymers were synthesized by reversible addition fragmentation chain transfer polymerization in α,α,α‐trifluorotoluene. Poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐vinylbenzylphosphonic diacid) (poly(FDA‐co‐VBPDA)) gradient copolymer was efficiently obtained by cleavage of the phosphonic ester groups of poly(FDA‐co‐VBPDE). The cloud points of these gradient copolymers in dense CO₂ were measured in a variable volume view cell at temperatures between 25 and 65 °C. The gradient copolymers show very good solubility in compressed CO₂ with the decreasing order: poly(FDA‐co‐AAEM) ≈ poly(FDA‐co‐VBPDE) > poly(FDA‐co‐VBPDA). Following a green chemistry strategy, poly(FDA‐co‐AAEM) gradient copolymer was successfully synthesized in scCO₂ with a good control over number‐average molecular weight and composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5448–5460, 2009     

Synthesis and aqueous solution properties of functionalized and thermoresponsive poly(D,L-lactide)/polyether block copolymers

Tri- and pentablock amphiphilic copolymers containing hydrophobic poly(D,L-lactide) block(s) and hydrophilic polyethers were synthesized in order to obtain new precursor architectures suitable for drug delivery systems. Polyglycidol-6-poly(ethylene oxide)-b-poly(D,L-lactide) possess high hydroxyl functionality provided by the linear polyglycidol block. Thus very stable hydroxyl functionalized micelles in aqueous media were obtained. On the other hand poly(D,L-lactide)-b-poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-b-poly(D,L-lactide) form temperature sensitive aggregates. The copolymers obtained were analyzed by SEC and NMR, and their aqueous solution properties were followed by cloud point measurements and determination of critical micellization temperature. TEM was used for particles visualization.     

Preparation of methoxy poly(ethylene glycol)/polyester diblock copolymers and examination of the gel‐to‐sol transition

Diblock copolymers consisting of methoxy poly(ethylene glycol) (MPEG) and poly(?‐caprolactone) (PCL), poly(δ‐valerolactone) (PVL), poly(L ‐lactic acid) (PLLA), or poly(lactic‐co‐glycolic acid) (PLGA) as biodegradable polyesters were prepared to examine the phase transition of diblock copolymer solutions. MPEG–PCL and MPEG–PVL diblock copolymers and MPEG–PLLA and MPEG–PLGA diblock copolymers were synthesized by the ring‐opening polymerization of ?‐caprolactone or δ‐valerolactone in the presence of HCl · Et₂O as a monomer activator at room temperature and by the ring‐opening polymerization of L ‐lactide or a mixture of L ‐lactide and glycolide in the presence of stannous octoate at 130 °C, respectively. The synthesized diblock copolymers were characterized with ¹H NMR, IR, and gel permeation chromatography. The phase transitions for diblock copolymer aqueous solutions of various concentrations were explored according to the temperature variation. The diblock copolymer solutions exhibited the phase transition from gel to sol with increasing temperature. As the polyester block length of the diblock copolymers increased, the gel‐to‐sol transition moved to a lower concentration region. The gel‐to‐sol transition showed a dependence on the length of the polyester block segment. According to X‐ray diffraction and differential scanning calorimetry thermal studies, the gel‐to‐sol transition of the diblock copolymer solutions depended on their degrees of crystallinity because water could easily diffuse into amorphous polymers in comparison with polymers with a crystalline structure. The crystallinity markedly depended on both the distinct character and composition of the block segment. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5784–5793, 2004     

Acid-catalyzed copolymerization of aspartic acid with ω-amino acid. -Biodegradability and Ca2+ chelating ability of poly(aspartic acid -Co- ω-amino acid)-

The polycondensation of L-aspartic acid (1) with various ω-amino acids (2) using phosphoric acid catalyst produced poly(succinimide-co-ω-amino acid)s (3), which was followed by alkali hydrolysis to poly(aspartic acid-co-ω-amino acid) (4). The Ca²⁺ chelating abilities of 4 depended on the content of comonomer unit in the copolymer and on the kind of amino acids. For the copolymer using 11-aminoundecanoic acid (2d) as a comonomer, the Ca²⁺ chelating ability was higher than that of poly(sodium acrylate). For poly(aspartic acid-co-6-aminocaproic acid) (4c), there was a tendency to increase according to the increase of 6-aminocaproic acid (2c) unit in the copolymer. The biodegradability of the copolymer in the case of 2c as a comonomer, evaluated by TOC measurement, was 63%, which was the highest degradability among the copolymers having different methylen length. The biodegradability of 4c decreased with increasing the 2c unit in 4c.     

Thermosensitive polylactide‐glycolide delivery systems for treatment of narcotic addictions

Environmental switches may be fabricated for the controlled release of pharmaceutical drug using a thermally responsive polymer with the intrinsic chemical and physical nature of stimuli‐sensitive smart materials. Particularly, much attention has been paid to the biomedical applications of poly(N‐isopropyl acrylamide) (PNIPAAm) because of its unique reversible transition at a specific lower critical solution temperature (LCST).Thermally sensitive block copolymers, poly(N‐isopropyl acrylamide‐b‐poly(L ‐lactide‐co‐glycolide) (PNIPAAm‐b‐PLGA), and polyethylene glycol‐poly (lactide‐co‐glycolide) (PEG‐PLGA) triblock copolymers with different compositions and length of PLGA block were synthesized via ring‐opening polymerization of lactide and glycolide in the presence of OH‐terminated PNIPAAm or PEG. The composition and structure of the polymer were determined by NMR and FTIR. The effect of important factors, such as ionic strength, pH, and polymer concentration on the phase transition behavior of temperature‐sensitive polymers, were investigated by cloud point measurements. The resulting thermosensitive polymers were used for the entrapment of a narcotic antagonist drug, naltrexone, as the model drug. The loading efficiency and drug release behavior of naltrexone‐loaded hydrogels were investigated. The naltrexone loaded thermosensitive polymers were able to sustain the release of naltrexone for different periods of time, depending on the polymer composition, and concentration. In vitro release studies showed that these thermosensitive polymers are able to deliver naltrexone in biologically active forms at a controlled rate for 3–8 weeks. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of repeating sequence copolymers of lactic,glycolic, and caprolactic acids

Repeating sequence copolymers of poly(lactic‐co‐caprolactic acid) (PLCA), poly(glycolic‐co‐caprolactic acid) (PGCA), and poly(lactic‐co‐glycolic‐co‐caprolactic acid) (PLGCA) have been synthesized by polymerizing segmers with a known sequence in yields of 50–85% with M_ns ranging from 18–49 kDa. The copolymers exhibited well‐resolved NMR resonances indicating that the sequence encoded in the segmers used in their preparation is retained and that transesterification is minimal. The exact sequences allowed for unambiguous assignment of the NMR spectra, and these standards were compared with the data previously reported for random copolymers. The glass transition temperatures (T_gs) of the PLCA and PGCA copolymers were found to depend primarily on monomer ratio rather than sequence. Sequence dependent T_gs were, however, noted for the PLGCA polymers with 1:1:1 L:G:C ratios; poly LGC and poly GLC exhibited T_gs that differed by nearly 8 °C. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Random and block styrenic copolymers bearing both ammonium and fluorinated side‐groups

1H,1H,2H,2H‐Perfluorooctyloxymethylstyrene (FS) was prepared and copolymerized with chloromethylstyrene (CMS). Conventional radical copolymerization of both these aromatic monomers led to poly(CMS‐co‐FS) random copolymers for which CMS was shown to be more reactive than the fluorinated comonomer. Their controlled radical copolymerization based on degenerative transfer, namely iodine transfer polymerization (ITP), led to various poly(CMS)‐b‐poly(FS) block copolymers. Molecular weights of poly(CMS‐co‐FS) copolymers reached 33,000 g mol^?1 while those of poly(CMS)‐b‐ poly(FS) block copolymers were 22,000 g mol^?1. Their composition ranged from 18 to 61 mol.% in FS. These copolymers were modified via a cationization step, aiming at replacing the chlorine atom in CMS unit by a trimethylammonium group, leading to the formation of cationic sites. The resulting functionalized copolymers exhibited different solubilities. If both copolymerization techniques led to water‐insoluble copolymers, the block architecture enabled incorporating lower FS proportion, resulting in more cationic sites. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of Thermo‐ and pH‐Sensitive Polyion Complex Micelles for Fluorescent Imaging

Two thermo‐ and pH‐sensitive polypeptide‐based copolymers, poly(N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide)‐b‐poly(L ‐lysine) (P(NIPAAm‐co‐HMAAm)‐b‐PLL, P1 ) and poly(N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide)‐b‐poly(glutamic acid) (P(NIPAAm‐co‐HMAAm)‐b‐PGA, P2 ), have been designed and synthesized by the ring‐opening anionic polymerization of N‐carboxyanhydrides (NCA) with amino‐terminated P(NIPAAm‐co‐HMAAm). It was found that the block copolymers exhibit good biocompatibility and low toxicity. As a result of electrostatic interactions between the positively charged PLL and negatively charged PGA, P1 and P2 formed polyion complex (PIC) micelles consisting of polyelectrolyte complex cores and P(NIPAAm‐co‐HMAAm) shells in aqueous solution. The thermo‐ and pH‐sensitivity of the PIC micelles were studied by UV/Vis spectrophotometry, dynamic light scattering (DLS), and transmission electron microscopy (TEM). Moreover, fluorescent PIC micelles were achieved by introducing two fluorescent molecules with different colors. Photographs and confocal laser scanning microscopy (CLSM) showed that the fluorescence‐labeled PIC micelles exhibit thermo‐ and pH‐dependent fluorescence, which may find wide applications in bioimaging in complicated microenvironments.     

Esterification reactions on syndiotactic poly(methallylalcohol). IV. Homo- and copolymers of N-protected methallyl-(L)-histidinate

Syndiotactic poly(methylallylalcohol) is fully esterified with N^α-protected (L )-histidine by carbodiimide in pyridine to yield the corresponding homopolymers, i.e., N^α-protected 2-methylallyl-(L )-histidinate monomer units and unreacted 2-methylallyl alcohol units are obtained, which in a second exhaustive esterification step are reacted with N^α-(benzyloxycarbonyl)-(L )-aspartic acid anhydride. The resulting copolymers consist of N^α-protected 2-methylallyl-(L )-histidinate and 2-methylally-N^α-(benzyloxycarbonyl)-(L )-hydrogen-α-aspartate monomer units. They are polyampholytes containing both imidazole and carboxyl groups. The structure, including composition of the copolymers, is determined by ¹H- and ¹³C-NMR, while water solubility and apparent pK_aa values are investigated by potentiometry.