不同载体Ni基负载型催化剂对甲烷部分氧化制合成气催化行为研究

采用浸渍法制备了单一载体(Al₂O₃、ZrO₂、CeO₂)和ZrO₂、CeO₂改性的Al₂O₃复合载体的Ni催化剂,考察了在甲烷部分氧化制备合成气反应中的催化性能。通过N₂-物理吸附、H₂程序升温还原、X射线衍射、NH₃程序升温脱附和程序升温氧化等技术对催化剂进行了表征。结果表明,在单一载体催化剂中,Ni/Al₂O₃具有较大的比表面积,其初始反应活性较高,但该催化剂表面易形成大量的积炭而快速失活。Ni/ZrO₂和Ni/CeO₂催化剂比表面积较小,活性金属Ni在其表面分散性差,催化剂具有较低的CH₄转化率。而CeO₂和ZrO₂改性的Al₂O₃复合载体催化剂,具有较大的比表面积,反应活性明显高于单一载体催化剂。CeO₂-Al₂O₃复合载体催化剂具有最高的反应活性和较好的反应稳定性。同时表明,含CeO₂催化剂反应后表面积炭较少,CeO₂的储放氧功能增强了催化剂对O₂的活化,提高催化剂活性的同时,可以抑制积炭的生成。     

Effect of preparation method on structural characteristics and propane steam reforming performance of Ni–Al2O3 catalysts

Propane steam reforming was studied over Ni–Al₂O₃ catalysts that were prepared by a conventional impregnation (IM) method and a one-step sol–gel (SG) technique. Both Ni–Al₂O₃ catalysts showed similar initial activity. However, IM-Ni–Al₂O₃ deactivated severely with time-on-stream of propane steam reforming. The catalyst prepared using a SG technique demonstrated stable catalytic performance. The two catalysts also showed major differences in product distribution, with SG catalyst giving much higher yields of hydrogen. Catalysts were characterized with temperature-programmed reduction (TPR), X-ray photoelectron spectroscopy (XPS), temperature-programmed oxidation (TPO), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Raman spectroscopy. It was revealed that, with sol–gel preparation, highly dispersed small Ni crystallites are formed with a strong interaction with the support. This is shown to be important for coke suppression and catalyst stability.     

Promoted ternary CuO-ZrO2-Al2O3 catalysts for methanol synthesis

Ternary CuO-ZrO₂-Al₂O₃ catalysts promoted by palladium or gold were prepared and tested in CO hydrogenation reaction at 260°C under elevated pressure (4.8 MPa). The promotion effect of palladium or gold addition on the physicochemical and catalytical properties of CuO-ZrO₂-Al₂O₃ catalysts in methanol synthesis (MS) was studied. The catalysts were characterized by BET, XRD, TPR-H₂, TPD-NH₃ methods. The BET results showed that the ternary system CuO-ZrO₂-Al₂O₃ had the largest specific surface area, cumulative pore volume and average pore size in comparison with the promoted catalysts. The yield of methanol can be given through the following sequence: 5%Pd/CuO-ZrO₂-Al₂O₃ > CuO-ZrO₂-Al₂O₃ > 2%Au/CuO-ZrO₂-Al₂O₃. We also found that the presence of gold or palladium on catalyst surface has strong influence on the reaction selectivity. The high selectivity of gold doped ternary catalyst is explained by the gold-oxide interface sites created on the catalyst surface and the acidity of those systems. The higher selectivity to methanol in the case of the palladium catalyst is explained by the spillover effect between Pd and CuO.      

CH4 reforming with CO2 for syngas production over La2O3 promoted Ni catalysts supported on mesoporous nanostructured γ-Al2O3

Nanostructured γ-Al₂O₃ with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N₂ adsorption-desorption, TPR, TPO, TPH, NH₃-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m²·g⁻¹ and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and O₂ to dry reforming feed increased the methane conversion and led to carbon free operation in combined processes.     

Ni_2P/TiO_2-Al_2O_3催化剂的制备及其加氢脱硫、脱氮性能

采用溶胶-凝胶法制备了TiO2-Al2O3复合载体,采用浸渍法制备了Ni2P/TiO2-Al2O3催化剂,并用X射线衍射(XRD)、N2吸附比表面积(BET)测定、热重-差热分析(TG-DTA)、X射线光电子能谱(XPS)等技术对催化剂的结构和性质进行了表征.催化剂加氢脱硫(HDS)和脱氮(HDN)活性评价在实验室固定床连续反应装置上,以噻吩和吡啶为模型反应物进行.考察了不同载体、Ni2P负载量、标称Ni/P摩尔比、催化剂焙烧温度对Ni2P/TiO2-Al2O3催化剂上同时进行的噻吩加氢脱硫和吡啶加氢脱氮性能的影响.结果表明,TiO2含量为80%(w)的TiO2-Al2O3复合氧化物为载体,Ni2P负载量为30.0%(w),标称Ni/P摩尔比为1/2,催化剂焙烧温度为500℃时,Ni2P/TiO2-Al2O3催化剂加氢脱硫脱氮活性最高.在360℃,3.0MPa,氢油比800(V/V),液时体积空速1.5h-1的条件下,噻吩HDS和吡啶HDN转化率分别为61.32%和64.43%.     

Novel Ni/CeO2-Al2O3 composite catalysts synthesized by one-step citric acid complex and their performance in catalytic partial oxidation of methane

A series of novel Ni/CeO2-Al2O3composite catalysts were synthesized by one-step citric acid complex method. The as-synthesized catalysts were characterized by N2physical adsorption/desorption, X-ray diffraction(XRD), Fourier transform infrared(FT-IR) spectroscopy, hydrogen temperature-programmed reduction(H2-TPR), X-ray photoelectron spectroscopy(XPS) and thermogravimetry analysis(TGA). The effects of nickel content, calcination and reaction temperatures, gas hourly space velocity(GHSV) and inert gas dilution of N2on their performance of catalytic partial oxidation of methane(CPOM) were investigated. Catalytic activity test results show that the highest methane conversion(85%), the best selectivities to carbon monoxide(87%) and to hydrogen(95%), the excellent stability and perfect H2/CO ratio(2.0) can be obtained over Ni/CeO2-Al2O3with 8 wt% Ni content calcined at 700 ℃ under the reaction condition of 750 ℃, CH4/O2ratio of 2 : 1 and gas hourly space velocity of 12000 mL h-1 g-1. Characterization results show that the good catalytic performance of this composite catalyst can be contributed to its large specific surface area(～108 m2 g-1), small crystallite size, easy reducibility and low coking rate.     

Catalytic conversion of greenhouse gases (CO2 and CH4) to syngas over Ni-based catalyst: Effects of Ce-La promoters

Dry reforming of methane (DRM) is an emerging technology as it can simultaneously serve as a prospective alternative energy source and mitigate greenhouse gases (e.g. CH₄ and CO₂). However, the industrial applications of DRM remain restricted due to the poor prospect of catalyst deactivation. In this study, the effects of adding CeO₂ and La₂O₃ as promoters on the catalytic performance of Ni/Al₂O₃ catalyst were assessed. Catalysts such as Ni/Al₂O₃, Ni/Al₂O₃-La₂O₃, and Ni/Al₂O₃-CeO₂ were synthesized at nano level using the sol-gel method. Citric acid was added to improve the reactivity of catalysts before the application of DRM. Various characterisation techniques were used to characterise synthesized catalysts, including Brunauer-Emmett-Teller (BET) analysis, temperature-programmed reduction (TPR), field emission scanning microscopy (FESEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The results revealed that the BET surface area of the synthesized catalyst slightly decreased when CeO₂ and La₂O₃ were added due to the deposition on the porous structure of the support. Meanwhile, the XRD results demonstrated the increase in reducibility and dispersion of Ni using CeO₂ promoter and the inhibited development of the non-active phase of Ni/Al₂O₃ using La₂O₃ promoter (i.e. NiAl₂O₄), resulting in the carbon formation and reduced efficiency of the catalyst. The catalytic performance in DRM at 800 °C showed that Ni/Al₂O₃-CeO₂ catalyst exhibited higher catalytic performance in terms of CH₄ and CO₂ conversion with 89.6% and 91.2% respectively. While Ni/Al₂O₃-La₂O₃ was found to play a substantial role in the stability of the chemical reaction during the 8 h reaction time-on-stream.     

Influence of support on resistance to carbon-deposition of catalyst for CH4, CO2 with O2 to synthesis gas

In the reaction of catalytic oxidation of CH₄, CO₂ with O₂ to synthesis gas, carbon-deposition is an important factor for deactivation. By adding different oxides to Ni/Al₂O₃ catalyst, its resistance to carbon-deposition was improved. The experimental results indicate that the order of resistance to carbon-deposition is as follows: Ni/CaO-Al₂O₃>Ni/MgO-Al₂O₃>Ni/ TiO₂-Al₂O₃ > Ni/CeO₂-Al₂O₃>Ni/La₂O₃-Al₂O₃>Ni/Y₂O₃-Al₂O₃>Ni/Fe₂O₃-Al₂O₃>Ni/Al₂O₃. The catalysts were characterized by CO₂-TPD, O₂-TPD and XPS methods. Here the relation between the order of resistance to carbon-deposition and performance of catalyst is discussed.     

Fe3O4改性的Ru/γ-Al2O3催化剂的原位液相加氢性能

采用分步浸渍法制备负载型Ru-Fe₃O₄/γ-Al₂O₃ 催化剂, 并利用透射电子显微镜(TEM)、X 射线衍射(XRD)、N₂吸附-脱附(BET)、傅里叶变换红外(FTIR)光谱与X射线光电子能谱(XPS)表征催化剂的纳米颗粒粒径分布、晶相组成、表面结构及吸附物种等性质. 将Ru-Fe₃O₄/γ-Al₂O₃催化剂用于3,4-二氯硝基苯选择性原位液相加氢反应, 考察了反应条件对催化活性的影响, 并讨论了不同制备条件下催化剂的稳定性能. 结果表明, 在473 K、液压3 MPa、原料质量分数2%, 乙醇/水体积比75:25 的反应条件下, 3,4-二氯硝基苯的转化率为100%, 3,4-二氯苯胺的选择性高达96.4%. Fe₃O₄含量对催化剂稳定性能有显著影响, 当Ru和Fe 的质量分数分别为2%和6%时, 催化剂可稳定200 h以上. 表面吸附CO与积碳是导致催化剂失活的主要原因, 以Fe₃O₄作为高效的助剂, 进行水汽转换(WGS)反应与费托合成(FTS)可移除CO, 而采用煅烧法去除表面积碳. 晶相变化与纳米颗粒的聚集可能导致催化剂部分失活, 其原因以及再生方法需进一步考察.     

A study of Pt–Pd/γ-Al2O3 catalysts for methane oxidation resistant to deactivation by sulfur poisoning

The catalytic oxidation of methane was studied over calcined and reduced Pt–Pd/γ-Al₂O₃ catalysts, in the presence and the absence of SO₂ in the CH₄–O₂ reaction feed. The effect of sulfation (SO₂ + O₂ for 4 h at 500 °C) was also studied on the catalyst resistance to deactivation by sulfur poisoning. Sulfating the calcined Pt–Pd/γ-Al₂O₃ catalysts resulted in a strong deactivation for the CH₄–O₂ reaction. However, the catalytic activity of the reduced-sulfated Pt–Pd/γ-Al₂O₃ catalyst for CH₄–O₂ reaction remained rather unaffected in the presence and in the absence of SO₂ in the reaction feed. XPS analysis revealed, over reduced-sulfated Pt–Pd/γ-Al₂O₃ catalysts, the presence of Pt(0) metallic surface species on which SO₂ interactions may be faster related to Pd surface species. The presence of Pt(0) may be necessary to prevent the interactions between SO₂ and Pd surface species. Long time catalytic tests showed that the activity of a reduced Pt–Pd/γ-Al₂O₃ catalysts for CH₄–O₂ reactions remained rather unaffected despite the presence of SO₂ in the reaction feed.     

沸石负载Ni催化剂在甲烷干重整中的稳定性(英文)

Ni/γ-Al2O3 , Ni/Y-zeolite, and Ni/H-ZSM-5 catalysts were prepared using the incipient wetness impregnation method. Their catalytic performance in dry reforming of methane was studied. The fresh and used catalysts and deposited carbon were characterized using H2 temperature-programmed reduction, temperature-programmed oxidation, N2 adsorption-desorption, X-ray diffraction, and thermogravimetric analysis. The H-ZSM-5-supported Ni catalyst proved to be more stable than the other two catalysts, as it had the lowest carbon deposition.     

焙烧温度对MnOx-CeO2-WO3-ZrO2催化剂上NH3选择性还原NO的影响

采用共沉淀法制备了MnO_x-CeO₂-WO₃-ZrO₂催化剂,考察了催化剂焙烧温度对O₂和H₂O存在下NH₃选择性催化还原（NH₃-SCR） NO的影响,并利用低温N₂吸附、X射线衍射（XRD）、透射电镜（TEM）、X射线光电子能谱（XPS）、NH₃程序升温脱附（NH₃-TPD）和CO脉冲反应对催化剂进行了表征. 结果表明在NH₃-SCR反应中,催化剂的低温活性随焙烧温度的提高而降低,这是由于催化剂表面化学吸附氧和酸性位减少引起的;催化剂的高温活性随焙烧温度的提高先增加后减小,这与催化剂表面最易释放氧数量的变化趋势相反. 700 ℃焙烧的催化剂具有良好的低温活性和最宽的反应温度窗口,在空速为90000 h^-1的条件下,该催化剂的起燃温度（50% NO转化率）为189 ℃,且反应温度在218-431 ℃范围内,NO转化率可达到80%-100%.     

Effect of synthesis solution pH of Co/γ-Al_2O_3 catalyst on its catalytic properties for methane conversion to syngas

The cobalt nanoparticles over γ-Al_2O_3 support were prepared via chemical reduction of CoCl_2·6H_2O using NaBH_4 with various values of pH in the range of 11. 92-13. 80. Synthesized catalysts were studied through X-ray diffraction( XRD),N_2 adsorption/desorption( BET),H_2-temperature programmed reduction( H_2-TPR),H_2-chemisorption,O_2 pulse titration and temperature programmed oxidation( TPO) methods. Obtained results exhibited the synthesis solution pH showed a significant influence on the activity and selectivity in partial oxidation of methane reaction. The methane conversion,CO selectivity and H_2 yield were enhanced by increasing of the synthesis solution pH. Compared to other catalysts,the catalyst that synthesized at pH of 13.80,showed a superior ability in syngas production with a H_2/CO ratio of near 2 and also a proper stability against deactivation during the partial oxidation of methane.     

Hydrodeoxygenation of Anisole over Ni/α-Al2O3 Catalyst

Ni-based catalysts supported on di erent supports (α-Al₂O₃,γ-Al₂O₃, SiO2, TiO₂, and ZrO₂) were prepared by impregnation. Effects of supports on catalytic performance were tested using hydrodeoxygenation reaction (HDO) of anisole as model reaction. Ni/α-Al₂O₃ was found to be the highest active catalyst for HDO of anisole. Under the optimal conditions, the anisole conversion is 93.25% and the hydrocarbon yield is 90.47%. Catalyst characteriza-tion using H₂-TPD method demonstrates that Ni/α-Al₂O₃ catalyst possesses more amount of active metal Ni than those of other investigated catalysts, which can enhance the cat-alytic activity for hydrogenation. Furthermore, it is found that the Ni/α-Al₂O₃ catalyst has excellent repeatability, and the carbon deposited on the surface of catalyst is negligible.     

Autothermal Reforming of Methane over Ni Catalysts Supported on CuO-ZrO2-CeO2-Al2O3

Ni catalysts supported on various mixed oxides of Al2O3 with rare earth oxide and transitional metal oxides were synthesized. The studies focused on the measurement of the autothermal reforming of methane to hydrogen over Ni catalysts supported on the mixed oxide ZrxCe30-xAl70Oδ (x=5, 10, 15). The catalytic performance of Ni/Zr10Ce20Al70Oδ was better than that of other catalysts. XRD results showed that the addition of Zr to Ni/Ce30Al70Oδ prevented the formation of NiAl2O4 and facilitated the dispersion of NiO. Effects of CuO addition to Zr10Ce20Al70Oδ were also investigated. The activity of Ni catalyst supported on CuO-ZrO2-CeO2-Al2O3 was somewhat affected and the Ni/Cu5Zr10Ce20Al65Oδ showed the best catalytic performance with the highest CH4 conversion, yield of H2, selectivity for H2 and H2/CO production ratio in operation temperatures ranging from 650 to 750℃.     

Influence of Calcination Temperature on Properties of Au/Fe2O3 Catalysts for Low Temperature Water Gas Shift Reaction

A series of Au/Fe₂O₃ catalysts for the water gas shift (WGS) reaction were prepared by modified deposition-precipitation method. The sample calcined at 300 °C showed higher catalytic activity and better stability than other samples. Using N₂ physisorption, in situ XRD, H₂-TPR, and XPS techniques, the influence of calcination temperature on properties of Au/Fe₂O₃ catalyst was explored, and the cause of deactivation was analyzed as well. The results showed that the catalytic behaviors were related to the interaction between Au and Fe₂O₃, and the reductive property of support, both of which were significantly affected by calcination temperature. Furthermore, according to the results of XPS, although stable carbonate and carbonyl surface species were found on the spent catalysts, the semiquantitative analysis of these species indicated that they were not the main cause of the deactivation. In fact, the deactivation of Au/Fe₂O₃ was sensitive to the structure change of support. During the water gas shift reaction, Fe₃O₄ particle would aggregate and crystallize leading to increase in the crystallinity of support and a significant reduction in the surface area of the catalysts, which resulted in the deactivation of Au/Fe₂O₃.     

Racemization of chiral amino alcohols III: Effect of Mg or Ca addition on the activity and stability of the Co/γ-Al2O3 catalyst

The racemization of R-(-)-2-amino-1-butanol in a reaction using Co/γ-Al₂O₃ catalysts and catalysts modified by Mg or Ca was investigated in this paper. Complete racemization was achieved with a yield of over 83% at using the Mg modified Co/γ-Al₂O₃ catalyst under optimized reaction conditions of 170°C and 2.5 MPa of H₂. The catalysts were thoroughly characterized by XRD, XPS, TPR, SEM and TEM. The addition of Mg and Ca may be advantageous for dispersing and stabilizing the active species of the Co/γ-Al₂O₃ catalyst, protecting from sintering, significantly improving its catalytic activity and stability.     

镍基催化剂上稻草水蒸气重整制富氢合成气

采用浸渍法制备了SiO₂, γ-Al₂O₃, CaO和TiO₂负载的Ni催化剂, 以及不同MgO含量的MgO-7.5%Ni/γ-Al₂O₃催化剂,利用X射线衍射和N₂吸附-脱附技术表征了催化剂的结构,在固定床反应器上评价了它们在稻草水蒸气催化重整制合成气反应中的催化性能,考察了反应条件对催化剂性能的影响.结果表明, 以γ-Al₂O₃为载体时Ni催化剂活性最高,其中7.5%Ni/γ-Al₂O₃催化剂的H₂收率可达1071.3ml/g,H₂:CO的体积比为1.4:1;同时,MgO的添加进一步提高了该催化剂的性能,当MgO含量为1.0%时,H₂收率可达1194.6ml/g,H₂:CO体积比可达3.9:1.可见MgO的加入促进了Ni基催化剂上稻草水蒸气催化重整制合成气反应的进行,同时使得合成气中CO发生水-汽转换反应,从而大大提高了合成气中H₂含量.     

Enhancement of the catalytic performances and lifetime of Ni/γ-Al2O3 catalysts for the steam toluene reforming via the combination of dopants: inspection of Cu,Co, Fe,Mn, and Mo species addition

In this work, the influence of metallic dopant addition in 10 wt % Ni/γ-Al₂O₃ catalyst on the material physico-chemical properties and catalytic activity for the toluene steam reforming was studied. Seventeen doped Ni/γ-Al₂O₃ catalysts were synthesized by the sol–gel process. The aim of this study was to determine which elements were the most suitable for the doping of 10 wt % Ni/γ-Al₂O₃ catalysts. The influence of the dopants was studied through different physico-chemical techniques. It appeared that some dopants showed lower catalytic performances due to high carbon deactivation. On the contrary, some dopants increased the resistance to coking while also improving the catalytic activity. Different mechanisms were proposed to explain these modifications of catalytic behavior. Among all doped Ni/γ-Al₂O₃ catalysts, the samples that combined Mn + Mo or Co + Mo dopants showed the best catalytic performances at 650 °C. Both samples showed high toluene reforming activity and low amounts of carbon deposit.     

TiO2-Al2O3载体的制备方法对其负载的磷化镍催化剂加氢脱氮反应性能的影响

采用共沉淀法和原位溶胶-凝胶法制备了TiO₂-Al₂O₃复合载体,其负载的磷化镍催化剂采用等体积浸渍法和H₂原位还原法制备. 通过N₂吸附（BET）、X射线衍射（XRD）、透射电镜（TEM）、程序升温还原（TPR）,X射线光电子能谱（XPS）和等离子体发射光谱（ICP-AES）表征技术对催化剂进行了表征,并通过喹啉的加氢脱氮反应评价了催化剂的加氢脱氮性能. 结果表明,原位溶胶-凝胶法制成的复合载体基本保留了原有的γ-Al₂O₃的孔特征,具有较大的比表面积和较宽的孔分布,TiO₂主要以表面富集的形式分散在管状的γ-Al₂O₃表面,其负载的磷化镍催化剂还原后所形成的活性相为Ni₂P和Ni₁₂P₅;而共沉淀法制成的复合载体比表面积较小,孔径分布更加集中,TiO₂趋于在块状的Al₂O₃表面均匀分散,其负载的磷化镍催化剂具有更好的可还原性,还原后所形成的活性相为Ni₂P. 不同的载体制备方法和不同的钛铝比对催化剂加氢脱氮性能影响较大,当n（Ti）/n（Al）=1/8时,共沉淀法载体负载的催化剂表现出最佳的加氢脱氮性能,在340 ℃,3 MPa,氢油体积比500,液时空速3 h^-1的反应条件下,喹啉的脱氮率可以达到91.3%.