共查询到20条相似文献,搜索用时 15 毫秒
1.
考察了以牛乳清蛋白(BSA)为模型药物,通过相平衡分配法制备载药瓜胶(GG)/聚丙烯酸(PAA)互穿聚合物网络(IPN)水凝胶的工艺条件.借助紫外可见光谱仪研究了载药水凝胶在结肠酶存在下的控制释放行为.结果表明:载药容量(CM)随瓜胶、丙烯酸用量的增加而下降,半IPN水凝胶的Cm较全IPN的略大;结肠酶能明显提高半IPN与全IPN中的BSA释放速率,且提高幅度随GG含量的增加而加快,GG/PAA IPN水凝胶具有结肠定位降解的特性,有望成为靶向结肠给药的理想载体材料. 相似文献
2.
Pablyana L. R. Cunha Rondinelle R. Castro Francisco A. C. Rocha Judith P. A. Feitosa 《Macromolecular Symposia》2008,266(1):48-52
Summary: Commercial Guar Gum, a galactomannan polysaccharide, was purified by the use of two subsequent methods, including precipitation with Fehling solution in order to eliminate protein impurities. The protein content (3.6%) was totally removed. Glutaraldehyde cross-linked gels were prepared with purified (GGP) and unpurified gum (GGU). The viscosity of the gels is similar to that of Hylan G-F 20, a commercial substitute of hyaluronic acid, used in viscosupplementation in human osteoarthritis. Guar Gums (gel and solution) were injected intra-articularly into the knee joints of rats subjected to experimental OA and the effect in hypernociception and cells influx measured. GGU promoted hypernociception and cell influx in naïve rats. GGP was innocuous to naïve rats and inhibited hypernociception, both as a gel or solution, to the same extent as Hylan G-F20. GGP promotes analgesia in OA due to its carbohydrate component. 相似文献
3.
Thermally Responsive Hydrogel Blends: A General Drug Carrier Model for Controlled Drug Release 下载免费PDF全文
Chongbo Ma Ye Shi Danilo A. Pena Lele Peng Prof. Guihua Yu 《Angewandte Chemie (International ed. in English)》2015,54(25):7376-7380
Thermally responsive hydrogels have drawn significant research attention recently because of their simple use as drug carrier at human body temperature. Here we design a hybrid hydrogel that incorporates a hydrophilic polymer, polyethyleneimine (PEI), into the thermally responsive hydrogel poly(N‐isopropylacrylamide) (PNIPAm), as a general drug carrier model for controlled drug release. In this work, on one hand, PEI modifies the structure and the size of the pores in the PNIPAm hydrogel. On the other hand, PEI plays an important role in tuning the water content in the hydrogel and controls the water release rate of the hydrogel below the lower critical solution temperature (LCST), resulting in a tunable release rate of the drugs at human body temperature (37 °C). Different release rates are shown as different amounts of PEI are incorporated. PEI controls the release rate, dependent on the charge characteristics of the drugs. The hydrogel blends described in this work extend the concept of a general drug carrier for loading both positively and negatively charged drugs, as well as the controlled release effect. 相似文献
4.
5.
Synthesis of Hydroxypropyl Guar Gum by Phase Transfer Catalysis 总被引:1,自引:0,他引:1
RongChunXIONG MingZhuCHANC JianMingCHEN NanZHOU GangWEI 《中国化学快报》2005,16(4):545-546
HGG (Hydroxypropyl guar gum) was synthesized by phase transfer catalysis for the first time. The effects of alkalinity, phase transfer catalyst, etherification, pH value, temperature,reaction time and stirring speed were investigated. An optimal synthetic reaction technology was established, namely, dose of guar gum is 100 g, propylene oxide 40-50 g, HTAC (hexadecyl trimethyl ammonium chloride ) 1.3-1.7 g, pH value 10-10.5, temperature 45-50~C, and reaction time 3-4 hours. The result shows that the improved HGG has high viscosity. Its dissolution speed, content of insoluble residue, colloid light transparency and stability are apparently superior to guar flour. 相似文献
6.
Sahar A. Ismail El-Sayed A. Hegazy Nihal O. Shaker Entsar E. Badr Noha M. Deghiedy 《高分子科学杂志,A辑:纯化学与应用化学》2013,50(10):967-974
Superabsorbent hydrogels based on the natural polymer chitosan and acrylic acid (CS/AAc) was prepared using 60Co gamma radiation as a source of initiation and crosslinking. The factors, which affect the preparation of CS/AAc hydrogels such as irradiation dose, CS/AAc ratios, and acrylic acid monomer concentrations, to get the best optimum conditions, were investigated. The kinetic studies of the swelling of CS/AAc hydrogel showed that it follows a Fickian type of water diffusion. The Fickian constant value ‘n’ was more than 0.5 with a high swelling capacity of 300 g/g as superabsorbent hydrogel. In addition, the suitability of CS/AAc hydrogel as carrier material for the drug Chlortetracycline-HCl has been investigated by adsorption isotherm studies. The performance of drug release from hydrogel systems, influenced by acrylic acid ratio and the effect of pH of the medium was studied. 相似文献
7.
《高分子科学杂志,A辑:纯化学与应用化学》2013,50(8):1085-1094
Guar gum was chemically modified by sulphonation using chlorosulphonic acid (ClSO3H) as a reagent. Effects of molar ratio of ClSO3H to glucopyranosic unit (ClSO3H/GU), reaction time and reaction temperature on the degree of sulphonation (DS) and molecular weight (Mw) of products were studied. The structures of guar gum sulphate were investigated by GPC, FT‐IR and UV‐Visible spectroscopy. Activated partial thromboplastin time (APTT) assay showed that the guar gum sulphate could inhibit the intrinsic coagulant pathway. The anticoagulant activity strongly depended on the DS and Mw of polysaccharides. DS>0.56 was essential for anticoagulant activity. The guar gum sulphate with the DS of 0.85 and the Mw of 3.40×104 had the best blood anticoagulant activity. 相似文献
8.
9.
聚膦腈在药物控释系统中的应用 总被引:12,自引:0,他引:12
聚膦腈由于其具有良好的生物相容性,可生物降解性及易于功能化的特性而成为一类独特的药物控释材料。本文就疏水性线型聚膦腈,聚膦腈水凝胶及聚膦腈高分子药物在药物控释系统中的应用作一简要综述。 相似文献
10.
The anionic, cationic and nonionic polymeric flocculants endowed with several distinguished characteristics are being increasingly applied for the treatment of industrial effluents, municipal and wastewater. For the treatment of highly negatively charged particle suspensions, cationic flocculants are more efficient. A new route to guar gum derivatives bearing cationic groups has been developed. A series of cationic guar gums (Cat GG) have been developed by incorporating a cationic moiety N- (3- Chloro-2- hydroxypropyl) trimethyl ammonium chloride (CHPTAC) onto the backbone of guar gum in presence of NaOH. The various grades of cationic guar gum have been characterized by elemental analysis, FTIR spectroscopy and intrinsic viscosity measurement. The flocculation characteristics of these cationic guar gums have been evaluated in silica suspension by jar test. It has been found that among the various grades of cationic guar gums, the one with longer CHPTAC chains shows better performance. The flocculation characteristics of this best performing cationic guar are compared with those of various commercially available flocculants in silica suspension. Their rheological investigations have also been undertaken. 相似文献
11.
Jorge Leganés Bayón Prof. Ana Sánchez-Migallón Prof. Ángel Díaz-Ortiz Dr. Carlos Alberto Castillo Dr. Inma Ballesteros-Yáñez Prof. Sonia Merino Prof. Ester Vázquez 《Chemistry (Weinheim an der Bergstrasse, Germany)》2020,26(71):17069-17080
Electromagnetically driven drug delivery systems stand out among stimulus-responsive materials due to their ability to release cargo on demand by remote stimulation, such as light, near infrared (NIR) or microwave (MW) radiation. MW-responsive soft materials, such as hydrogels, generally operate at 2.45 GHz frequencies, which usually involves rapid overheating of the scaffold and may affect tissue surrounding the target location. In contrast, 915 MHz MW penetrate deeper tissues and are less prone to induce rapid overheating. In order to circumvent these limitations, we present here for the first time a graphene-based hydrogel that is responsive to MW irradiation of ν=915 MHz. This system is a candidate soft scaffold to deliver a model hydrophobic drug. The graphene present in the hydrogel acts as a heat-sink and avoids overheating of the scaffold upon MW irradiation. In addition, the microwave trigger stimulates the in vitro delivery of the model drug, thus suggesting a remote and deep-penetrating means to deliver a drug from a delivery reservoir. Moreover, the MW-triggered release of drug was observed to be enhanced under acidic conditions, where the swelling state is maximum due to the swelling-induced pH-responsiveness of the hydrogel. The hybrid composite described here is a harmless means to deliver remotely a hydrophobic drug on demand with a MW source of 915 MHz. Potential use in biomedical applications were evaluated by cytotoxicity tests. 相似文献
12.
13.
建立了微波消解-石墨炉原子吸收法测定瓜尔豆胶中铅的方法。探讨了样品的称样量及前处理条件、基体改进剂的选择以及仪器工作条件的优化。铅的线性范围为0~40.0μg/L,相关系数r=0.9996,方法的检出限为0.63μg/L,测定结果的相对标准偏差为1.32%~2.16%(n=6),加标回收率为90.3%~99.4%。该法准确、简单、灵敏度高,重现性好。 相似文献
14.
本文研究了黄原胶(XG)和瓜尔胶(GG)的混合溶液及其硼砂(B)交联体系的流变性,考察了XG/GG间的“协同增效作用”以及溶液组成、pH和电解质(NaCl和CaCl 2)对其流变性的影响。结果表明,所有溶液体系均为假塑型流体,其流变曲线可用Herschel-Bulkley和Casson模型描述。XG和GG复配具有明显的“协同增粘效应”,在XG占两聚合物的质量分数w(XG)为20%和90%时协同增粘效应最强,其“协同增粘率”(R m)分别约为42%和34%。硼砂(B)可交联XG/GG混合溶液,其交联增粘效果随w(XG)的减小和硼砂质量浓度ρ(B)的增大而增大;在w(XG)=50%和ρ(B)=1.00 g/L时,“交联增粘率”可达85%。在所研究的pH值范围(6.2~10.0)内,XG/GG混合溶液的流变性基本无变化,而XG/GG/B交联体系(w(XG)=50%和ρ(B)=0.75~1.00 g/L)的表观粘度随pH值增大先升高后降低,pH=9.0时出现最大值,交联增粘率达107%。电解质可使XG/GG/B交联溶液(w(XG)=10%和ρ(B)=0.50 g/L)体系的粘度大幅下降,且CaCl 2的影响明显高于NaCl,表明交联结构的耐盐能力较差。这些结果加深了对XG/GG混合溶液流变性的认识,可为其实际应用(如在强化采油中的应用)提供依据。 相似文献
15.
16.
17.
It is well establishment that polysaccharides are commonly used in many fields of formulation such as food and cosmetic industries as viscosity modifiers or gelling agents. Among the different impacts on the mixture properties, these materials are also known to affect the aroma release or retention thus its sensory perception; the effect depends whether polysaccharide structure induces specific retention or release phenomena from the complex media. Present study deals with studying aroma compounds behaviour from dilute and semi-dilute aqueous polysaccharide solutions consisting of different guar gum samples. Results allow stating that the whole polymer characteristics as determined by means of structural analysis, protein content determination, rheological and surface tension measurements play a major role on the polysaccharide/aroma compound interaction mechanisms. In particular, results evidence a strong Mannose to Galactose (M/G) ratio effect, thus allowing stating the occurrence of hydrophobic intra and intermolecular mechanism. In addition to that, proteins are demonstrated to only slightly affect the volatile retention. More generally, such an original study allows new highlights concerning macromolecular organisation and interactions in solution. 相似文献
18.
温敏性PCL-PEG-PCL水凝胶的合成、表征及蛋白药物释放 总被引:2,自引:0,他引:2
考察了温敏性PCL-PEG-PCL水凝胶中聚乙二醇(PEG)及聚己内酯(PCL)不同嵌段组成对其溶胶-凝胶相转变温度以及亲水性药物(牛血清白蛋白, BSA)释放速率的影响. 采用开环聚合法, 以辛酸亚锡为催化剂、PEG1500/PEG1000为引发剂, 与己内酯单体发生开环共聚, 合成了一系列具有不同PEG和PCL嵌段长度的PCL-PEG-PCL型三嵌段共聚物. 通过核磁共振氢谱及凝胶渗透色谱对其组成、结构及分子量进行了表征. 共聚物的溶胶-凝胶相变温度由翻转试管法测定. 利用透射电镜、核磁共振氢谱及荧光探针技术证实了该材料在水溶液中胶束的形成. 以BSA为模型蛋白药物, 制备载药水凝胶, 利用microBCA法测定药物在释放介质中的浓度, 研究其体外释放行为. 实验结果表明, 共聚物的溶胶-凝胶相变温度与PCL及PEG嵌段长度紧密相关, 即在给定共聚物浓度情况下, 固定PEG嵌段长度而增加PCL嵌段长度, 会导致相变温度降低; 而固定PCL嵌段长度而增加PEG嵌段长度, 其相变温度相应升高. 水凝胶中蛋白药物的释放速率与疏水的PCL嵌段长度无关, 而与亲水的PEG嵌段长度密切相关, 即PEG嵌段越长, 蛋白药物释放越快. 相似文献
19.
以环氧氯丙烷和NaHSO_3为原料,Na_2SO_3为引发剂,乙二胺四乙酸二钠(EDTA-2Na)为络合增效剂,经酸催化开环反应合成了磺酸型两性表面活性剂中间体3-氯-2-羟基丙磺酸钠,然后在弱酸性条件下与胍胶通过醚化反应制备了磺酸基羟丙基胍胶,其结构经IR表征。通过正交实验确定了合成配方和条件的最优结果,研究了反应温度、pH、改性胍胶浓度对成胶后凝胶的表观粘度影响,并测试了最佳条件下制备的凝胶和对应稀溶液的流变性能。结果表明:氧氯化锆可有效交联改性胍胶,在pH为6、温度为70℃、改性胍胶浓度为0.6%的条件下制备的凝胶具有剪切变稀性质以及较好的粘弹性。 相似文献
20.
Johanna Claus Thomas Eickner Niels Grabow Udo Kragl Stefan Oschatz 《Macromolecular bioscience》2020,20(9)
In this work ion functionalized hydrogels as potent drug delivery systems are presented. The ion functionalization of the hydrogel enables the retention of ionic drug molecules and thus a reduction of burst release effects. Timolol maleate in combination with polymerized anionic 3‐sulfopropylmethacrylate potassium and ibuprofen combined with cationic poly‐[2‐(methacryloyloxy)ethyl] trimethylammonium chloride are investigated in respect to their drug release profile. The results are showing an ion exchange depending release behavior instead of a diffusion‐controlled drug release as it is known from common drug delivery systems. Furthermore, the suitability of such hydrogels for standard methods for sterilization is investigated. 相似文献