Solubilities of ammonia in basic imidazolium ionic liquids

Solubilities of ammonia in four conventional imidazolium ionic liquids: [C_nmim][BF₄] (n = 2, 4, 6, 8) have been measured. Isothermally fixed temperatures are 293.15, 303.15, 313.15, 323.15 and 333.15 K; the pressure is from 0 to 1.0 MPa. High solubilities of ammonia are found, and it is also found that the solubilities of ammonia increase when the length of cations’ alkyl increases (the ILs have the same anion), that is: [C₈mim]⁺ > [C₆mim]⁺ > [C₄mim]⁺ > [C₂mim]⁺. The solubility data have been correlated by the Krichevisky–Kasarnovsky equation, and then Henry's constants and partial molar volumes of NH₃ at infinite dilution are obtained. The thermodynamic properties such as solution enthalpy (Δ_solH), solution Gibbs free energy (Δ_solG), solution entropy (Δ_solS), and solution heat capacity (Δ_solC_p) of these systems are obtained.     

梯度淋洗离子对色谱法测定咪唑离子液体中的阳离子

采用梯度淋洗离子对色谱-紫外检测(IPC-UV)法分离测定5种咪唑离子液体中的阳离子。实验采用ZORBAX Eclipse XDB C18色谱柱,以离子对试剂与乙腈为流动相,首先考察了离子对试剂种类和浓度、乙腈浓度和色谱柱温度对咪唑阳离子保留的影响,然后确定了最适宜分离的色谱条件。在此条件下可同时基线分离5种咪唑阳离子。所测阳离子的检出限(S/N=3)为0.05～0.30 mg/L,峰面积的相对标准偏差(RSD, n=5)在0.1%以下。将此方法用于分析实验室合成的2种1-烷基-3-甲基咪唑离子液体中的阳离子,加标回收率在98.6%～102.1%之间。本方法准确、可靠,具有较好的实用性。     

Metal-containing ionic liquids and ionic liquid crystals based on imidazolium moiety

Ionic liquids and ionic liquid crystals of imidazolium salts composed of various transition and main group metals have been reviewed. Ionic metal complexes of imidazoles and N-heterocyclic carbenes possess the similar properties were also included. These types of ILs and ILCs have been realized as potential solvents, catalysts, catalyst precursors and reagents for many organic transformations and provide ecofriendly protocols. They have also been found to play key roles in material science. Many of these IL systems are air- and moisture stable and are considered as alternatives for air- and moisture sensitive chloroaluminate-based ILs.     

Transition-metal free ring deuteration of imidazolium ionic liquid cations

A simple, low-cost and transition-metal free ring deuteration procedure applicable to ionic liquids (ILs) with imidazolium cations has been developed. Reaction profiles for the exchange have been measured.     

Polymerised ionic liquid crystals bearing imidazolium and bipyridinium groups

Novel kinds of polymerised ionic liquid crystals (PILCs) bearing imidazolium and bipyridinium groups were synthesised and characterised in this work. Some bromo-polyesters were synthesised in an esterification chain reaction using 2,3-dibromosuccinyl dichloride, isophthaloyl chloride and 4,4′-biphenol. The polyester imidazolium bromides (PIBs) and polyester dipyridinium bromides (PDBs) were obtained by a quaternisation reaction between the bromo-polyesters, N-methylimidazole and 4-4′-bipyridine, respectively. The polyester imidazolium tetrafluoroborates (PITs) and polyester dipyridinium tetrafluoroborates (PDTs) were synthesised using the corresponding PIBs and PDBs in an anion-exchange reaction. The chemical structures, liquid crystalline properties and molecular weights of these polymers were characterised by multiple experimental techniques. All the PILCs including PIBs, PDBs, PITs and PDTs display smectic A phase on heating and cooling cycles. The liquid-crystalline properties of bromo-polyesters are influenced by the length of flexible spacer and composition of polyester backbones, while those of PILCs are determined by the ionic groups as additional important influent factors. In comparison with those of the mother bromo-polyesters, the d-spacing of PILCs reduced slightly due to Im⁺–Br^?, Dp⁺–Br^?, Im⁺–BF₄^? and Dp⁺–BF₄^? ion pairs in the polymer systems. Monocationic imidazolium salts display weaker interionic and intermolecular interaction, higher mobility and lower viscosity than dicationic dipyridinium salts.     

Interactions between a surface active imidazolium ionic liquid and BSA

The interactions between a surface active imidazolium ionic liquid (IL), 1-tetradecyl-3-methylimidazolium bromide (C₁₄mimBr) and bovine serum albumin (BSA) were studied. To investigate the structure changes of BSA induced by addition of C₁₄mimBr, this system was studied by surface tension, isothermal titration microcalorimetry, far-UV circular dichroism (CD) and fluorescence spectra. The surface tension measurement shows the formation of C₁₄mimBr/BSA complex and the effect of the complex on surface tension. Furthermore, it reveals the interaction type. The enthalpy change in the whole interaction process between C₁₄mimBr and BSA was obtained by isothermal titration microcalorimetry, and the results prove the alteration of the BSA structure. To realize the structure alteration position more definitely, far-UV CD was used to obtain the contents of α-helix and random coil. Changes of these contents reveal that the secondary structure of BSA changes with addition of C₁₄mimBr. Fluorescence spectra are used to prove that the alteration of the secondary structure is due to the interactions of C₁₄mimBr molecules and amino acid residues. They show that tryptophan (Trp) residues, one of the intrinsic fluorophores in BSA, are exposed to a hydrophobic microenvironment with the addition of C₁₄mimBr.     

Poly(basic ionic liquid) coated magnetic nanoparticles: High-loaded supported basic ionic liquid catalyst

A novel poly(ionic liquid) (PIL) coated magnetic nanoparticle was synthesized by distillation-precipitation-polymerization of 1-vinyl-3- ethyl imidazolium in the presence of surface modified magnetic nanoparticles. The resulting catalyst was used as magnetic heterogeneous base catalyst for the synthesis of 4H-benzo[b]pyrans in water. The separation of the catalyst from the reaction mixture was readily achieved by simple magnetic decantation and the catalyst could be easily recycled without appreciable loss of catalytic activity. Because of polymer layers coated the surface of the magnetic nanoparticles, the catalyst has a high loading level of ionic liquid.     

Increased enantioselectivity and remarkable acceleration of lipase-catalyzed transesterification by using an imidazolium PEG-alkyl sulfate ionic liquid

Several types of imidazolium salt ionic liquids were prepared derived from poly(oxyethylene)alkyl sulfate and used as an additive or coating material for lipase-catalyzed transesterification in an organic solvent. A remarkably increased enantioselectivity was obtained when the salt was added at 3-10 mol % versus substrate in the Burkholderia cepacia lipase (lipase PS-C)-catalyzed transesterification of 1-phenylethanol by using vinyl acetate in diisopropyl ether or a hexane solvent system. In particular, a remarkable acceleration was accomplished by the ionic liquid coating with lipase PS in an iPr(2)O solvent system while maintaining excellent enantioselectivity; it reached approximately 500- to 1000-fold acceleration for some substrates with excellent enantioselectivity. A similar acceleration was also observed for IL 1-coated Candida rugosa lipase. MALDI-TOF mass spectrometry experiments of the ionic-liquid-coated lipase PS suggest that ionic liquid binds with lipase protein.     

A new liquid crystal compound based on an ionic imidazolium salt

The preparation of 1,3-bis-(4-dodecyloxy-phenyl)-3H-imidazol-1-ium trifluoro-methanesulfonate is described from the 4-dodecyloxy phenylamine derivative. This new imidazolium salt exhibits a lamellar liquid crystal mesophase between 119 and 172 °C. The Smectic A phase has been characterised by polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. In addition the lamellar crystallographic structure obtained on single crystal is reported and corroborated the self-assembly of molecules in the mesomorphic state.     

Hydroxyl-containing imidazolium ionic liquids

A number of imidazolium ionic liquids with bis(trifluoromethylsulfonyl)imide anion containing a ω-hydroxyalkyl substituent of different lengths in the cation (n_С = 2–8) were synthesized. The properties of the obtained liquids were investigated by DSC, TGA, IR, and NMR spectroscopy. Their thermal stability was studied; melting points, viscosity, and volatility in vacuum were measured. The possibility of using synthesized ionic liquids as heat carriers under high vacuum conditions is demonstrated.     

咪唑类离子液体的合成及其在分析化学中的应用

本文介绍了咪唑类离子液体的合成,特别是以BF4-、PF6-为阴离子的咪唑类离子液体的合成,并重点综述了近年来咪唑类离子液体在电化学分析、质谱、光谱、色谱及毛细管电泳等分析化学中的应用.     

Photo-degradation of imidazolium ionic liquids

Degradation of imidazolium ionic liquid, [bmim⁺][TFSA⁻] and iodide solution of [bmim⁺][TFSA⁻] by UV-laser irradiation has been studied through ground-state absorption and transient absorption spectroscopy. We found that excited state [bmim⁺]* undergoes degradation efficiently.     

Supported imidazolium ionic liquid phases: A new material for solid-phase extraction

This study reports a material that is based on the concept of ionic liquid analogue: a slightly crosslinked polymer-supported imidazolium trifluoroacetate salt (IL-CF₃COO⁻) that favorably combines the properties of ionic liquids (ILs) and the advantages of a solid support.The ionic liquid-supported material was evaluated for the first time as a solid-phase extraction (SPE) sorbent for selectively and quantitatively extracting pharmaceuticals from aqueous samples.The novel IL-CF₃COO⁻ was evaluated under reversed-phase (RP), weak anion exchange (WAX), strong anion exchange (SAX) and strong cation exchange (SCX) SPE procedures, and we found that SAX conditions are the most suitable for investigating the behaviour of the IL-CF₃COO⁻ material. Under SAX conditions, the IL-CF₃COO⁻ material was capable of selectively and quantitatively extracting a group of acidic compounds from aqueous samples, while washing basic analytes that were also present in the sample.The SPE method using IL-CF₃COO⁻ material was used to analyse 1000 ml of different aqueous samples (ultrapure, tap and river) with complete recovery of the acidic compounds studied. Moreover, the method provided clean chromatogram and high recoveries when percolating complex real samples, such as 1000 ml of river water and 250 ml of effluent wastewater from a sewage treatment plant spiked at low levels with the analytes studied.     

Synthesis of gold and palladium nanoparticles supported on CuO/rGO using imidazolium ionic liquid for CO oxidation

A simple ionic liquid-assisted approach for the fabrication of graphene-based nanocomposite is reported. Pd–CuO/rGO and Au–CuO/rGO nanocomposites are successfully fabricated with the assistance of the ionic liquid 1-butyl-3-methyl imidazolium tetrafluoroborate. The physicochemical features of nanocomposite are systematically characterized by XRD, FT-IR, Raman spectroscopy, XPS, TGA, FESEM, AFM, and HRTEM. Carbon monoxide has been used as a probe molecule to emphasize the performance of the fabricated materials. The results indicate that the incorporation of a little quantity of ionic liquid results in the creation of uniformly dispersed NPs simultaneously with the reduction of graphene oxide (GO) into rGO, which leads to a low-temperature CO oxidation process. Besides, the Au–CuO/rGO catalyst achieved excellent durability in CO oxidation for 14 h, without detectable deactivation. The low-temperature CO oxidation was mainly induced by the synergistic effects between the components of catalysts. The Au or Pd and CuO combination not only generates more interfaces, which is more favorable for the activation of oxygen but also enhances the catalyst reduction behavior. Consequently, a graphene composite catalyst can be considered a potential CO oxidation candidate.

     

Rapid and simultaneous determination of imidazolium and pyridinium ionic liquid cations by ion-pair chromatography using a monolithic column

A method for rapid and simultaneous determination of imidazolium and pyridinium ionic liquid cations by ion-pair chromatography with ultraviolet detection was developed.Chromatographic separations were performed on a reversed-phase silica-based monolithic column using 1-heptanesulfonic acid sodium-acetonitrile as mobile phase.The effects of ion-pair reagent and acetonitrile concentration on retention of the cations were investigated.The retention times of the cations accord with carbon number rule.The method has been successfully applied to the determination of four ionic liquids synthesized by organic chemistry laboratory.     

Synthesis of a kind of geminal imidazolium ionic liquid with long aliphatic chains

A novel geminal imidazolium ionic liquid with long hydrocarbon group,1,4-bis(3-tetradecylimidazolium-1-yl)butane bromide was synthesized and an efficient synthesized method was introduced detailedly.Its structure was determined by FT-IR,~1H NMR and elemental analysis.     

Synthesis of gold nanoparticles modified with ionic liquid based on the imidazolium cation

The synthesis and processing of nanoparticles consisting of metallic nanocrystal cores and organic monolayer shells promise interesting technological applications. Here, we report the synthesis of gold nanoparticles modified with ionic liquids based on the imidazolium cation. Aggregation-induced color changes of the gold nanoparticles in an aqueous solution were used as an optical sensor for anions via anion exchange of ionic liquid moiety. We also demonstrated the phase transfer of the gold nanoparticles from aqueous media to ionic liquid.     

T-shaped ionic liquid crystals based on the imidazolium motif: exploring substitution of the C-2 imidazolium carbon atom

In this contribution the first examples of so‐called rigid‐core, T‐shaped imidazolium ionic liquid crystals, in which the C‐2 atom of the imidazolium ring is substituted with an aryl moiety decorated with one or two alkoxy chains, are described. The length of the alkoxy chain(s) was varied from six to eighteen carbon atoms (n=6, 10, 14–18). Whereas the compounds with one long alkoxy chain display only smectic A phases, the salts containing two alkoxy chains exhibit smectic A, multicontinuous cubic, as well as hexagonal columnar phases, as evidenced by polarising optical microscopy, differential scanning calorimetry, and powder X‐ray diffraction. Structural models are proposed for the self‐assembly of the molecules within the mesophases. The imidazolium head groups and the iodide counterions were found to adopt a peculiar orientation in the central part of the columns of the hexagonal columnar phases. The enantiotropic cubic phase shown by the 1,3‐dimethyl‐2‐[3,4‐bis(pentadecyloxy)phenyl]imidazolium iodide salt has a multicontinuous Pm$\bar 3In this contribution the first examples of so-called rigid-core, T-shaped imidazolium ionic liquid crystals, in which the C-2 atom of the imidazolium ring is substituted with an aryl moiety decorated with one or two alkoxy chains, are described. The length of the alkoxy chain(s) was varied from six to eighteen carbon atoms (n=6, 10, 14-18). Whereas the compounds with one long alkoxy chain display only smectic A phases, the salts containing two alkoxy chains exhibit smectic A, multicontinuous cubic, as well as hexagonal columnar phases, as evidenced by polarising optical microscopy, differential scanning calorimetry, and powder X-ray diffraction. Structural models are proposed for the self-assembly of the molecules within the mesophases. The imidazolium head groups and the iodide counterions were found to adopt a peculiar orientation in the central part of the columns of the hexagonal columnar phases. The enantiotropic cubic phase shown by the 1,3-dimethyl-2-[3,4-bis(pentadecyloxy)phenyl]imidazolium iodide salt has a multicontinuous Pm ?3m structure. To the best of our knowledge, this is the first example of a thermotropic cubic mesophase of this symmetry.     

Properties of ionic liquid HMIMPF6 with carbonates,ketones and alkyl acetates

The densities and refractive indices of the pure ionic liquid (IL) HMIMPF₆ were determined at temperature range from T =(278.15 to 318.15) K for density and from T = (288.15 to 318.15) K for refractive index. The coefficient of thermal expansion of HMIMPF₆ was calculated from the experimental values of density. The densities and refractive indices of binary mixtures involving dimethyl carbonate (DMC), diethyl carbonate (DEC), acetone, 2-butanone, 2-pentanone, methylacetate, ethylacetate, and butylacetate + HMIMPF₆ (1-hexyl-3-methylimidazolium hexafluorophosphate) have been measured at T = 298.15 K and atmospheric pressure. Excess molar volumes and changes of refractive index on mixing for the binary systems were calculated. The miscibility of IL with different organic solvents and (liquid + liquid) equilibrium (LLE) data of binary mixture HMIMPF₆ + DEC have been determined experimentally.     

Copper complex immobilized on imidazolium supported ionic liquid for ultrasound promoted ester synthesis

1-glycyl-3-methyl imidazolium chloride-copper (II) complex [[Gmim]Cl-Cu (II)] was found to be a heterogeneous catalyst for an efficient and greener solvent free synthesis of esters by condensation of carboxylic acids and alcohols with excellent yield with high turnover number (8.3 × 10² to 9.5 × 10²) using ultrasound irradiation. In addition, this method features reusability of catalyst, reduced waste, thus making new protocol more environmentally suitable whilst no catalyst leaching was observed.