Unendliche Scheiben und Halbscheiben mit Kraft- und Versetzungssingularitäten

Übersicht Mit Hilfe des Verfahrens der komplexen Spannungsfunktion wird der Spannungszustand in der unendlichen Scheibe und der Halbscheibe mit beliebigen Kraft- und Versetzungssingularitäten allgemein berechnet. Dabei werden sowohl die sechs Grundsingularitäten (Einzelkraft und Verschiebungssprung mit je zwei Komponenten, Einzelmoment und Expansivkraft), als auch die höheren Singularitäten berücksichtigt. Außer dem Verschiebungssprung können alle Singularitäten auch am Rand auftreten. Durch Linien- bzw. Flächenintegration lassen sich beliebige, auch inkompatible und thermoelastische Spannungszustände erzeugen.

---

Summary With the aid of complex stress-functions, the state of stress and strain in the infinite plate and half-plate is calculated in general with regard to arbitrary force and displacement singularities (dislocation). The six fundamental singularities (force and dislocation singularity with each two components, moment and expansive force) and also higher singularities are considered. As well as the dislocation all other singularities may also act at the boundary. By integration along lines or over areas, any state of stress, including incompatible and thermoelastic states, can be represented.

     

幂硬化可压缩材料Ⅰ型动态裂纹尖端奇异场

研究了平面应变条件下幂硬化可压缩材料中定常扩展的Ⅰ型动态裂纹尖端应力应变奇异场．采用Ｊ２流动理论和场量直角坐标分量，得到了应力应变奇异性不同时的裂纹尖端渐近场，其中场量的角变化规律和理想弹塑性材料的完全相同     

幂硬化可压缩材料Ⅰ型动态裂纹尖端奇异场

研究了平面应变条件下幂硬化可压缩材料中定常扩展的Ⅰ型动态裂纹尖端应力应变奇异场．采用Ｊ２流动理论和场量直角坐标分量，得到了应力应变奇异性不同时的裂纹尖端渐近场，其中场量的角变化规律和理想弹塑性材料的完全相同     

Near tip field for pseudo Mode II crack growth: Power law hardening material

The asymptotic behavior of stress and strain near the tip of a Mode II crack growing in power law hardening material is analyzed by assuming that the crack grows straight ahead even though tests show otherwise. The results show that the stress and strain possess the singularities of (ln r)^2/(n−1) and (ln r)^2n/(n−1) respectively. The distance from the crack tip is r, and n is the hardening exponent, i.e. σⁿ. The amplitudes of the stress and strain near the crack tip are determined by the asymptotic analysis.     

Initiation and growth characterization of corner cracks near circular hole

The finite element analysis of crack problems often incorporates the asymptotic character of the local solution into the formulation. Embedment of stress or strain singularities can impose serious restrictions on the outcome and inconsistencies in predicting crack and/or growth. These restrictions are discussed in connection with the problem of two diametrically opposite corner cracks near a circular hole subjected to remote uniform tension. Enforced in the numerical treatment is the 1/r character of the strain energy density function local to the corner crack border where r is the radial distance measured from the crack front. The tendency for the corner crack to become a through crack is predicted by assuming that each point of the crack border extends by an amount proportional to the strain energy density factor. The path would correspond to the loci of minimum strain energy density function. Numerical results are displayed graphically and discussed in connection with crack initiation and non-self-similar crack growth.     

Dissimilar material joints with and without free-edge stress singularities: Part I. A biologically inspired design

An integrated experimental and numerical investigation was conducted for removing the free-adge stress singularities in dissimilar material joints. A convex inter-face/joint design, inspired by the shape and mechanics of trees, will result in reduced stress singularities at bimaterial corners for most engineering material combinations.In situ photoelasticity experiments on convex polycarbonate-aluminum joints showed that the free-edge stress singularity was successfully removed. As a result, the new design not only improves the static load transfer capacity of dissimilar meterial joints, but also yields more reasonable interfacial tensile strength evaluation. For convex polycarbonate-aluminum and poly(methyl methacrylate)-aluminum joint specimens, the ultimate tensile load increased up to 81% while the total material volume was reduced by at least 15% over that of traditional butt-joint specimens with severe free-edge stress singularities.     

纤维端部的界面裂纹分析

基于弹性力学空间轴对称问题的通解,研究了短纤维增强复合材料中纤维端部的轴对称币形和柱形界面裂纹尖端的应力奇异性,得到了裂纹尖端附近的奇异应力场．研究结果表明,这两种轴对称界面裂纹尖端的应力奇异性相同,并且与平面应变状态下相应模型的应力奇异性一致,材料性能对裂纹尖端附近奇异应力场的影响可用三个组合参数描述     

Dislocations in second strain gradient elasticity

A second strain gradient elasticity theory is proposed based on first and second gradients of the strain tensor. Such a theory is an extension of first strain gradient elasticity with double stresses. In particular, the strain energy depends on the strain tensor and on the first and second gradient terms of it. Using a simplified but straightforward version of this gradient theory, we can connect it with a static version of Eringen’s nonlocal elasticity. For the first time, it is used to study a screw dislocation and an edge dislocation in second strain gradient elasticity. By means of this second gradient theory it is possible to eliminate both strain and stress singularities. Another important result is that we obtain nonsingular expressions for the force stresses, double stresses and triple stresses produced by a straight screw dislocation and a straight edge dislocation. The components of the force stresses and of the triple stresses have maximum values near the dislocation line and are zero there. On the other hand, the double stresses have maximum values at the dislocation line. The main feature is that it is possible to eliminate all unphysical singularities of physical fields, e.g., dislocation density tensor and elastic bend-twist tensor which are still singular in the first strain gradient elasticity.     

Gekerbte und gelochte Scheiben mit Kraft- und Versetzungssingularitäten

Übersicht Mit Hilfe des Verfahrens der komplexen Spannungsfunktion wird der Spannungs- und Verschiebungszustand in gekerbten und gelochten Scheiben mit Kraft- und Versetzungssingularitäten berechnet.

---

Summary By means of complex stress functions the state of stress and strain in plates with notches or holes is calculated with regard to force and dislocation singularities.

     

Dynamic stress intensity factor K III and dynamic crack propagation characteristics of anisotropic materials

Based on the mechanics of anisotropic materials, the dynamic propagation problem of a mode Ⅲ crack in an infinite anisotropic body is investigated. Stress, strain and displacement around the crack tip are expressed as an analytical complex function, which can be represented in power series. Constant coefficients of series are determined by boundary conditions. Expressions of dynamic stress intensity factors for a mode Ⅲ crack are obtained. Components of dynamic stress, dynamic strain and dynamic displacement around the crack tip are derived. Crack propagation characteristics are represented by the mechanical properties of the anisotropic materials, i.e., crack propagation velocity M and the parameter ~. The faster the crack velocity is, the greater the maximums of stress components and dynamic displacement components around the crack tip are. In particular, the parameter α affects stress and dynamic displacement around the crack tip.     

Plane-strain state of an elastoplastic body with a crack under mixed-mode loading

A mixed-mode (I + II) crack model with a plastic strip on its continuation under plane strain is proposed. The stress components within the strip are determined from the yield conditions, stress limitation, and relationship between the normal stress components defined via the principal stress state. The crack parameters are analyzed for the Mises yield condition. In the quasibrittle case, the governing system of equations includes stress intensity factors K _I, K _II, and T-stresses     

振荡应力奇异性及其强度系数的数值分析方法

本文以具有振荡应力奇异性的平面问题为例,提出了一种利用普通的数值分析结果（由有限地或边界元程序计算得到的应力分量或位移分量）,来确定奇异性次数以及相应的复应力强度系数的数值分析方法。为了验证该方法的有效性,应用平面应变情况下的边界元计算结果,对界面端模型进行了分析。计算结果表明,本方法可以精确地求得振动应力奇异性次数,并且与奇异性对应的复应力强度系数也可以很方便地应用外插法得到。     

幂硬化粘塑性材料动态扩展裂纹尖端场的渐近解

采用弹性－粘塑性本构模型，对幂硬化粘塑性介质中反平面剪切动态扩展裂纹尖端的应力，应变场进行了渐近分析，给出了反平面剪切动态扩展纹尖端场的渐进方程。分析结果表明，在裂纹法端应力具有（ｌｎＲ／ｒ）１／ｎ－１的奇异性，应变具有（ｌｎＲ／Ｒｎ／ｎ－１的奇异性。从而提示了幂硬化粘塑材料反平面剪动态扩展裂纹尖端场的渐近行为。     

A Note on the Influence of Cohesive Stress-Separation Laws on Elastic Stress Singularities in Antiplane Shear

Elastic stress singularities occur at the vertices of reentrant corners with traditional, stress-free, boundary conditions. By recognizing cohesive stress action at sharp corners, and also introducing consistent cohesive laws ahead of corners, these singular stresses can be removed. This was earlier shown asymptotically for plane strain states: Here it is shown asymptotically for antiplane shear states.      

Crack tip asymptotic character of anti-plane stress and strain rate for linear fractional constitutive relations

Linear-fractional strain rate and stress relations are used to simulate materials undergoing steady state creep. The crack tip asymptotic character of the stress and strain rate field is obtained in exact and approximate form. In the limit as the radial distance emanating from the crack tip approaches zero, the stress field corresponds to that for an ideal plastic material while the exact and approximate solutions tend to coincide. Discussed is the nonhomogeneous singular character of the strain rate field that possess different orders of singularities in a circular region around the crack tip.     

The Stress State of a Ferromagnetic with an Elliptic Crack in a Homogeneous Magnetic Field

The problem on the stress–strain state of an infinite isotropic body made of a magnetically soft material and containing an elliptic crack is considered. It is assumed that the body is under an external magnetic field perpendicular to the crack plane. The basic characteristics of the stress–strain state and the magnetic field induced are determined and their singularities near the elliptic crack are studied. Formulas are given for the stress intensity factors for the force and magnetic fields near the crack tip     

Limiting conditions for compression testing of flat specimens in the split hopkinson pressure bar

The split Hopkinson pressure bar (SHPB) technique is analyzed during the initial stages of loading by means of axisymmetric finite element simulations of dynamic compression tests. Limiting strains as functions of the test parameters such as the specimen diameterd and heighth were found to ensure a one-dimensional stress state and axial stress homogeneity in specimens of elastic-perfectly plastic material. The one-dimensional stress state is necessary and sufficient for accurate test results for flat specimens (h/d≤0.5) and nonflat specimens, respectively, with diameters up to half of the bar diameter. Only very small values of the Coulomb friction constraint (μ≈0.01) seem to be acceptable. The significance of the determined limiting conditions to the more practical case of a rate dependent material is investigated using an elastic-viscoplastic material for the specimen. The stress and strain rate reconstructed from the calculated bar signals (according to the SHPB analysis) are compared with stresses and strain rates averaged over the cross section of the specimen. Well-known inertia corrections improve the results of the SHPB procedure, but errors remain for small strains and highly time dependent strain rates.     

A Mode- II Griffith Crack in Decagonal Quasicrystals

By using the method of stress functions, the problem of mode-II Griffith crack in decagonal quasicrystals was solved. First, the crack problem of two-dimensional quasicrystals was decomposed into a plane strain state problem superposed on anti-plane state problem and secondly, by introducing stress functions, the18 basic elasticity equations on coupling phonon-phason field of decagonal quasicrystals were reduced to a single higher-order partial differential equations. The solution of this equation under mixed boundary conditions of mode-II Griffith crack was obtained in terms of Fourier transform and dual integral equations methods. All components of stresses and displacements can be expressed by elemental functions and the stress intensity factor and the strain energy release rate were determined. Biography: GUO Yu-cui (1962-), Associate professor, Doctor     

On the pressure and stress singularities induced by steady flows of incompressible viscous fluids

Design for structural integrity requires an appreciation of where stress singularities can occur in structural configurations. While there is a rich literature devoted to the identification of such singular behavior in solid mechanics, to date there has been relatively little explicit identification of stress singularities caused by fluid flows. In this study, stress and pressure singularities induced by steady flows of viscous incompressible fluids are asymptotically identified. This is done by taking advantage of an earlier result that the Navier-Stokes equations are locally governed by Stokes flow in angular corners. Findings for power singularities are confirmed by developing and using an analogy with solid mechanics. This analogy also facilitates the identification of flow-induced log singularities. Both types of singularity are further confirmed for two global configurations by applying convergence-divergence checks to numerical results. Even though these flow-induced stress singularities are analogous to singularities in solid mechanics, they nonetheless render a number of structural configurations singular that were not previously appreciated as such from identifications within solid mechanics alone.