一类新的表面活性剂:长链烷基三苯基鏻盐(Ⅰ)——正十二烷基三苯基溴化鏻的合成及其表面活性初探

合成了正十二烷基三苯基溴化鏻,并用荧光探针法研究了它在水溶液中的表面活性。利用芘作为荧光探针,根据其单体荧光光谱中第3与第1振子带强度之比与其所处环境的极性之间的相关性,测定了该表面活性剂的临界胶束浓度为2.08×10^-3mol/L,它在水溶液中胶束内核的微极性为16.1(以介电常数表示)。     

荧光探针法研究胶原蛋白的水溶液聚集状态

利用一种分子内电荷转移化合物３ 甲氧基 ４’ Ｎ，Ｎ 二甲氨基黄酮（ＤＭＭＦ）作为荧光探针，研究了胶原蛋白在水溶液中的聚集状态．研究结果发现，当胶原蛋白浓度增大到０５ｍｇ／ｍＬ以上时，ＤＭＭＦ在４６５ｎｍ处的荧光强度有一突跃；继续增大其浓度，荧光强度越来越大．证明胶原蛋白在水溶液中随浓度增大有明显的聚集行为．利用荧光偏振法测量该体系内ＤＭＭＦ的荧光偏振特性，发现当胶原蛋白浓度增大到０５ｍｇ／ｍＬ以上时，体系具有较高的微粘度，进一步证实了胶原蛋白在水溶液中的聚集特性．     

一类新型荧光化学敏感器形成激基缔合物的温度效应

对一类具有分子识别功能的荧光分子敏感器化合物，在水溶液中形成的分子内激基缔合物的温度效应进行了研究。进而提出该类化合物在水溶液中进行了内单体和分子内激基缔合物转化的机制。通过分析所得的热力学数据，同文献值相比较，推导出该类化合物在水溶液中可能存在的几何构型，为该类化合物在作为探针应用时提供理论依据。     

荧光探针在蛋白质研究中的应用

荧光探针技术是研究蛋白质在水溶液中构象的一种有效方法。利用它可以测定蛋白质分子的疏水微区内两基团的距离以及酶与底物结合过程中蛋白质构象的变化等。本文综述了荧光探针技术在蛋白质研究中的一些进展。     

离子型表面活性剂在水溶液中的分子构型

本文利用表面活性剂分子中内在的荧光探针及外加荧光探针,研究了离子型表面活性剂分子在水溶液中的构型,烷基三苯基鱗盐及N-烷基吡啶盐对芘的单体荧光猝灭服从Stern-Volmer方程,是扩散控制的碰撞猝灭,但不同链长的猝灭剂的荧光猝灭行为呈反常状态,即链越长,猝灭速率常数越大,在十六烷基三甲基铵(CTMAB)水溶液中观察到了芘的激基缔合物荧光,同时观察到了CTMAB对芘的荧光猝灭的阻碍(阳离子猝灭剂)和促进(阴离子猝灭剂)作用,提出离子型表面活性剂在水溶液中呈绕曲状的分子构型,且是一种动态构型。     

水溶性超分子荧光探针对多菌灵的识别及细胞成像

基于八元瓜环(Q[8])可使吖啶橙(AD)的荧光降低的性质制备了荧光探针2AO@Q[8],当在该探针中加入多菌灵后荧光强度又逐渐增强,利用此超分子配合物的荧光效应,构建了一种能够检测多菌灵的超分子荧光探针.研究结果表明,该探针在水溶液中对多菌灵具有良好的选择性,在一定浓度范围内其线性关系良好,检出限为8. 14×10~(-8)mol/L.细胞成像结果显示,该探针在前列腺癌细胞中对多菌灵具有良好的响应,可用于生物细胞内多菌灵的识别检测.     

无探针荧光光谱法测定十二烷基硫酸钠的临界胶束浓度

建立了无探针荧光光谱法测定表面活性剂临界胶束浓度(CMC)的新方法,测定了典型阴离子表面活性剂十二烷基硫酸钠(SDS)在水溶液中的CMC,并与表面张力法和电导率法的测定结果进行了对比。结果表明,荧光光谱法样品用量少,测定的SDS的CMC与传统方法一致,说明采用无探针荧光光谱法能够测定一些物质的临界浓度。     

N—异丙基丙烯酰胺／丙烯酸十八酯共聚物水溶液胶束及相分？…

合成了Ｎ－异丙基丙烯酰胺（ＮＩＰＡＭ）和丙烯酸十八酯（ＯＤＡ）的共聚物，利用荧光探针和滴重法研究了ＮＩＰＡＭ－烘聚物在水溶液中的胶束形成过程，同时还利用荧光探针法研究了共聚物水溶液在温度升高时出现的ＬＣＳＴ现象，表明该高分子在温度升高时存在着相分离现象，利用Ｌ－Ｂ技术测量共聚物不溶单分子膜的π－Ａ曲线，发现随着温度升高共聚物的单分子膜越来越凝聚的反常现象，这从另一个侧面证实了共聚物ＮＩＰＡＭＯＤＡ     

荧光探针法研究壳聚糖在水溶液中的聚集态行为

本文用两种结构类似的分子内电荷转移化合物,3-羟基-6甲基-4-N,N-二甲氨基黄酮丙酸酯(PF)和3-甲氧基-4’-N,N-二甲氨基黄酮(DMMF),作为荧光探针,研究了壳聚糖在水溶液中的聚集状态.研究结果发现,当壳聚糖浓度增大到1×10^-3 kg/L或以上时,PF在430 nm处的荧光强度有一突增现象.利用DMMF作为荧光探针,研究了它在不同壳聚糖溶液中的稳态偏振,研究发现,随着壳聚糖浓度的增大,其偏振度也明显增大.这些结果进一步证实了壳聚糖在水溶液中的聚集特性,同时也为分子内电荷转移化合物——黄酮类化合物作为荧光探针研究生物大分子在水溶液中的构象提供了有益的尝试.     

水溶性量子点荧光探针用于胃癌细胞相关抗原CA242的检测

基于量子点荧光探针对胃癌细胞相关抗原CA242进行了检测。首先在水溶液中直接合成性能优良的量子点荧光纳米颗粒,并在其表面成功修饰了羊抗小鼠IgG和聚乙二醇,制得功能化的水溶性量子点荧光探针,并利用探针对胃癌细胞相关抗原CA242进行检测,进一步与传统的基于荧光染料标记的免疫荧光分析方法进行了比较。实验结果表明:该功能化的探针能够有效地识别胃癌细胞相关抗原CA242,并且在光稳定性和灵敏度方面都较传统的基于荧光染料标记的免疫荧光分析方法有明显的改善,从而为CA242的相关检测以及胃癌的诊断与愈后判断提供了新的方法。     

Tributylgermanium hydride as a replacement for tributyltin hydride in radical reactions

Tributylgermanium hydride (Bu(3)GeH) can be used as an alternative to tributyltin hydride (Bu(3)SnH) as a radical generating reagent with a wide range of radical substrates. Tributylgermanium hydride has several practical advantages over tributyltin hydride, e.g. low toxicity, good stability and much easier work-up of reactions. The reagent can be easily prepared in good yield and stored indefinitely. Suitable substrates include iodides, bromides, activated chlorides, phenyl selenides, tert-nitroalkanes, thiocarbonylimidazolides and Barton esters. Alkyl, vinyl and aryl radicals can be generated in radical reactions including reduction and cyclisation processes. Common radical initiators such as ACCN and triethylborane can be used. The slower rate of hydrogen abstraction by carbon-centred radicals from Bu(3)GeH as compared to Bu(3)SnH facilitates improved cyclisation yields. Polarity reversal catalysis (PRC) with phenylthiol can be used in reactions which generate stable radical intermediates which will not abstract hydrogen from Bu(3)GeH.     

Synthesis of functionalized pyrrolidin-2-ones and (S)-Vigabatrin from pyrrole

Starting from pyrrole, the novel 3,4-didehydropyrohomoglutamate 8 or (ent)-8 can be efficiently synthesized in up to 91% ee, which can be utilized as a versatile building block toward functionalized pyrrolidin-2-ones. Moreover, (ent)-8 can be readily converted to (S)-Vigabatrin, being an irreversible inhibitor for GABA-T, which is used as adjunctive therapy in patients that suffer from epilepsy.     

Methods for detection of point mutations: performance and quality assessment. The IFCC Scientific Division, Committee on Molecular Biology Techniques.

We give an overview of current methods for the detection of point mutations as well as small insertions and deletions in clinical diagnostics. For each method, the following characteristics are specified: (a) principle, (b) major modifications, (c) maximum fragment size that can be analyzed, (d) ratio and type of mutations that can be detected (e) minimum ratio of mutant to wild-type alleles at which mutations can be detected, and (j) detection methods. Special attention is paid to the possibilities of quality assessment and the potential for standardization and automation.     

Niobium(III) as an analytical reagent. : Part I. The titrimetric determination of iron,copper, thallium,molybdenum, uranium and vanadium

Niobium(III) solutions can be used in direct titrations of copper(II), iron(III), thallium(III), moIybdenum(VI), vanadium(V) and uranium(VI) in milligram amounts. Phenosafranine is generally satisfactory as the indicator, but potentiometric end-points can also be used. Copper and iron can be determined successively when a mixed indicator containing phenosafranine and méthylene blue is used. Thallium(I) and thallium (III) can be determined in mixtures. The niobium (III) solutions are stable for several days under a carbon dioxide atmosphere.     

Silanization of polyelectrolyte-coated particles: an effective route to stabilize Raman tagging molecules adsorbed on micrometer-sized silver particles

Micrometer-sized Ag (microAg) powders are very efficient surface-enhanced Raman scattering (SERS) substrates. To use microAg powders as a core material for molecular sensors operating via SERS, it is necessary to stabilize the tagging (i.e., SERS-marker) molecules adsorbed onto them. We demonstrate in this work that once the tagging molecules are coated with aliphatic polyelectrolytes such as poly(allylamine hydrochloride), the base-catalyzed silanization can be readily carried out to form stable silica shells around the polyelectrolyte layers by a biomimetic process; any particle can therefore be coated with silica since polyelectrolytes can be deposited beforehand via a layer-by-layer deposition method. Even after silanization, the SERS peaks of marker molecules on microAg particles are the only observable peaks since aliphatic polyelectrolytes, as well as silica shells, are intrinsically weak Raman scatterers, and more importantly, the SERS signals must be derived mostly from the first layer of the adsorbates (i.e., the marker molecules) in direct contact with the microAg particles. Silica shells, once fabricated, can further be derivatized to possess biofunctional groups; therefore, the modified microAg particles can be used as platforms of highly stable SERS-based biological sensors, as well as barcoding materials.     

Determination of cerium in minerals with sulphanilic acid

Cerium can be determined colorimetrically in minerals with sulphanilic acid. Cerium(III) ions are oxidized with silver(II) in 1-7% sulphuric acid. Sulphanilic acid is oxidized by cerium(IV) ions in 20% sulphuric acid. The absorbance is determined at 540 nm. In the presence of maganese or chromium, cerium can be separated by precipitation as the oxalate. Lanthanum can be used as a gathering agent if necessary.     

离子色谱-抑制电导法分别测定海水中阴离子和阳离子

以氢氧化钾为流动相,阴离子交换分离,抑制电导检测,可以同时分离F-、Cl-、Br-、NO3-、SO42-、PO43-I、-等海水中的常见阴离子,利用梯度淋洗可以使以上各种离子在其最佳保留时间和最佳峰形条件下出峰。以8 mmol/L H2SO4为淋洗液,阳离子交换分离,抑制电导检测,可以同时分离测定海水中的Na 、K 、Mg2 、Ca2 、Sr2 和Ba2 。在所采用的色谱条件下各阴阳离子均可以得到很好的线性和很低的检出限。     

Superatom compounds, clusters, and assemblies: ultra alkali motifs and architectures

It has recently been demonstrated that chosen clusters of specific size and composition can exhibit behaviors reminiscent of atoms in the periodic table and hence can be regarded as superatoms forming a third dimension. An Al(13) cluster has been shown to mimic the behavior of halogen atoms. Here, we demonstrate that superatom compounds formed by combining superhalogens (Al(13)) with superalkalis (K(3)O and Na(3)O) can exhibit novel chemical and tunable electronic features. For example, Al(13)(K(3)O)3 is shown to have low first and second ionization potentials of 2.49 and 4.64 eV, respectively, which are lower than alkali atoms and can be regarded as ultra alkali motifs. Al(13)K(3)O is shown to be a strongly bound molecule that can be assembled into stable superatom assemblies (Al(13)K(3)O)n with Al(13) and K(3)O as the superatom building blocks. The studies illustrate the potential of creating new materials with an unprecedented control on physical and electronic properties.     

Fabrication of one-dimensional Fe3O4/P(GMA-DVB) nanochains by magnetic-field-induced precipitation polymerization

One-dimensional (1D) magnetic Fe(3)O(4)/P(GMA-DVB) peapod-like nanochains have been successfully synthesized by magnetic-field-induced precipitation polymerization using Fe(3)O(4) as building blocks and P(GMA-DVB) as linker. The Fe(3)O(4) microspheres without surface modification can be arranged with the direction of the external magnetic field in a line via the dipolar interaction between Fe(3)O(4) microspheres and linked permanently via P(GMA-DVB) coating during precipitation polymerization. The length of peapod-like nanochains can be controlled by magnetic field intensity, and the thickness of polymer shell can be tuned by the amount of monomers. Magnetic measurement revealed that these 1D peapod-like nanochains showed highly magnetic sensitivity. In the presence of magnetic field, 1D magnetic Fe(3)O(4)/P(GMA-DVB) peapod-like nanochains can be oriented and aligned along the direction of external magnetic field.