基于GSH-CdTe/CdS量子点的荧光变化研究hsDNA与盐酸洛美沙星-Cu(Ⅱ)配合物的相互作用

采用水相法合成了谷胱甘肽(GSH)修饰的CdTe/CdS量子点(GSH-CdTe/CdS QDs). 透射电子显微镜表征结果表明, GSH-CdTe/CdS QDs的粒径分布均匀, 分散性好. 在Tris-HCl(pH=7.6)缓冲液中, 由于静电引力作用, 带正电的盐酸洛美沙星(LMFH)-Cu(Ⅱ)配合物[LMFH-Cu(Ⅱ)]吸附到带负电的GSH-CdTe/CdS QDs表面形成基态复合物, 导致GSH-CdTe/CdS QDs的荧光猝灭. 随后, 向GSH-CdTe/CdS QDs-LMFH-Cu(Ⅱ)配合物体系中加入鲱鱼精DNA(hsDNA), hsDNA可诱导LMFH-Cu(Ⅱ)配合物从GSH-CdTe/CdS QDs表面脱落而嵌入到hsDNA的双螺旋结构中, 使GSH-CdTe/CdS QDs的荧光恢复. 通过对GSH-CdTe/CdS QDs荧光的可逆调控, 利用荧光光谱、 紫外-可见吸收光谱和共振瑞利散射光谱研究了hsDNA与LMFH-Cu(Ⅱ)配合物的相互作用. 通过对比GSH-CdTe/CdS QDs与LMFH相互作用的光谱性质, 讨论了GSH-CdTe/CdS QDs-LMFH-Cu(Ⅱ)-hsDNA的相互作用机理, 模拟了作用过程, 从而建立了一种研究氟诺喹酮类药物的金属配合物与核酸相互作用机制的光谱方法.     

水溶性量子点的制备及其与壳聚糖衍生物的自组装

以3-巯基丙酸(HS-CH2CH2COOH)为稳定剂, 制备了水溶性的碲化镉(CdTe)量子点(QDs), 考察了制备条件对QDs荧光性能的影响及CdTe QDs与壳聚糖及叶酸和聚乙二醇改性的壳聚糖的自组装. 研究发现, 壳聚糖及改性壳聚糖与QDs的复合物荧光强度相对纯的CdTe QDs明显增强, 且QDs被包裹在内核, 复合粒子呈明显的核/壳结构. 改性壳聚糖/QDs复合物较小且尺寸分布更为均一.     

Effect of CdS Interlayer on Properties of CdTe Based Quantum Dots

Highly luminescent thioglycolic acid-capped CdTe-based core/shell quantum dots (QDs) were synthesized through encapsulating CdTe QDs in various inorganic shells including CdS, ZnS and CdZnS. CdTe/CdS core/shell QDs exhibited a significant redshift of emission peaks (a maximum emission peak of 652 nm for the core/shell QDs and 575 nm for CdTe cores) with increasing shell thickness. In contrast, the redshift of photoluminescence (PL) peak wavelength of CdTe/ZnS QDs was less than 15 nm. The PL peak wavelengths of the core/shell QDs depended strongly on core size and shell thickness. The PL quantum yields (QYs) of the CdTe/CdS core/shell QDs are up to 67 % while that of CdTe/ZnS core/shell QDs is 45 %. A composite CdZnS shell made CdTe cores a high PL QY up to 51 % and broadly adjusted PL spectra (a maximum PL peak wavelength of 664 nm). The epitaxial growth of the shell was confirmed by X-ray powder diffraction analysis and luminescence decay experiments. Because of high PL QYs, tunable PL spectra, and low toxicity from a ZnS surface layer, CdTe/CdZnS core/shell QDs will be great potential for bioapplications.     

CdTe量子点与蛋白质相互作用的荧光猝灭效应

本文在水热法合成水溶性CdTe及核壳结构CdTe/CdS量子点的基础上,分别研究了细胞色素c对CdTe量子点及CdTe/CdS核壳量子点荧光的猝灭效应和CdTe量子点对牛血清白蛋白荧光的猝灭效应,并阐述了猝灭机理。结果显示,细胞色素c对CdTe量子点的荧光猝灭效应具有一定的粒径依赖性,粒径越小,猝灭效应越强;细胞色素c对CdTe/CdS核壳量子点的猝灭效应比对CdTe量子点的更强,揭示了受激电子的表面传递机理。CdTe量子点通过松散牛血清白蛋白的螺旋结构而猝灭其荧光。     

Highly luminescent CdSe/Cd(x)Zn(1-x)S quantum dots coated with thickness-controlled SiO2 shell through silanization

A silanization technique of hydrophobic quantum dots (QDs) was applied to SiO(2)-coated CdSe/Cd(x)Zn(1-x)S QDs to precisely control the SiO(2) shell thickness and retain the original high photoluminescence (PL) properties of the QDs. Hydrophobic CdSe/Cd(x)Zn(1-x)S core-shell QDs with PL peak wavelengths of 600 and 652 nm were prepared by a facile organic route by using oleic acid (OA) as a capping agent. The QDs were silanized by using partially hydrolyzed tetraethyl orthosilicate by replacing surface OA. These silanized QDs were subsequently encapsulated in a SiO(2) shell by a reverse micelles synthesis. The silanization plays an important role for the QDs to be coated with a homogeneous SiO(2) shell and retain a high PL efficiency in water. Transmission electron microscopy observation shows that the shells are 1-9 nm with final particle sizes of 10-25 nm, depending on the initial QD size. In the case of short reaction time (6 h), the QDs were coated with a very thin SiO(2) layer because no visible SiO(2) shell was observed but transferred into the water phase. The silica coating does not change the PL peak wavelength of the QDs. The full width at half-maximum of PL was decreased 4 nm after coating for QDs emitting at both 600 and 652 nm. The PL efficiency of the SiO(2)-coated is up to 40%, mainly determined by the initial PL efficiency of the underlying CdSe/Cd(x)Zn(1-x)S QDs.     

The importance of reference materials in doping-control analysis

Polyamidoamine (PAMAM) dendrimers and water-soluble 3-mercaptopropionic acid (MPA)-capped CdSe quantum dots (QDs) were combined to produce a new gel containing supramolecular complexes of QDs/PAMAM dendrimers. The formation of the QDs/PAMAM supramolecular complexes was confirmed by high resolution electron microscopy and Fourier transform infrared (FTIR) analyses. Molecular dynamics simulations corroborated the structure of the new QDs/PAMAM-based supramolecular compound. Finally, on the basis of the prominent fluorescent properties of the supramolecular complexes, PAMAM dendrimer was functionalized with folic acid to produce a new QDs/PAMAM-folate derivative that showed an efficient and selective performance as a marker for gastric cancer cells.     

Characterization of CdSe quantum dots with bidentate ligands by capillary electrophoresis

The CdSe quantum dots (QDs) with bidentate ligands: a-diimine (NN) and dihydrolipoic acid (DHLA) were synthesized and characterized by UV-Vis, particle size and capillary electrophoretic techniques. Two systems were analyzed: CdSe with one ligand (CdSe/ligand) and CdSe with two different ligands (CdSe//ligand1/ligand2), where ligand = α-diimine or DHLA. Hydrodynamic features of functionalized QDs were characterized by zone capillary electrophoretic (CZE), and particle size techniques and these methods were consistent. It was established that CZE, micellar (MEKC) and microemulsion (MEEKC) modes were suitable for separating charged CdSe QDs and that no peaks were obtained for QDs passivated with electrically neutral ligands. For CdSe QDs with neutral (NN) ligands, a preconcentration method with the use of a micellar plug was introduced for visualizing these QDs. A sharp peak representing neutral QDs was obtained within the zone of micellar plug of a non-ionic surfactant, Here, a ligand character used for CdSe modification and the type of the electrophoretic method applied were the determining factors for the QDs peak visualization. Moreover, examples of visualization of charged and neutral QDs on the same run were presented, and for this purpose, dual mechanism (separation/preconcentration) was proposed.      

Facile and efficient fabrication of g-C3N4 quantum dots for fluorescent analysis of trace copper(II) in environmental samples

A facile and efficient fabrication of g-C₃N₄ quantum dots with highly fluorescent based on recrystallization and ultrasonic exfoliation was presented. The obtained g-C₃N₄ QDs was successfully applied to the determination of trace Cu(II) in different environmental water samples.     

Solvothermal synthesis of InP quantum dots and their enhanced luminescent efficiency by post-synthetic treatments

InP quantum dots (QDs) were solvothermally synthesized by using a greener phosphorus source of P(N(CH(3))(2))(3) instead of highly toxic P(TMS)(3) widely used, and subsequently subjected to a size-sorting processing. While as-grown QDs showed an undetectably low emission intensity, post-synthetic treatments such as photo-etching, photo-radiation, and photo-assisted ZnS shell coating gave rise to a substantial increase in emission efficiency due to the effective removal and passivation of surface states. The emission efficiency of the photo-etched QDs was further enhanced by a consecutive UV photo-radiation, attributable to the photo-oxidation at QD surface. Furthermore, a relatively thick ZnS shell on the surface of InP QDs that were surface-modified with hydrophilic ligands beforehand was photochemically generated in an aqueous solution at room temperature. The resulting InP/ZnS core/shell QDs, emitting from blue to red wavelengths, were more efficient than the above photo-treated InP QDs, and their luminescent properties (emission bandwidth and quantum yield) were comparable to those of InP QDs synthesized with P(TMS)(3). Structural, size, and compositional analyses on InP/ZnS QDs were also conducted to elucidate their core/shell structure.     

Preparation and characterization of thiacalix[4]arene coated water-soluble CdSe/ZnS quantum dots as a fluorescent probe for Cu2+ ions

Highly fluorescent water-soluble CdSe/ZnS (core/shell) quantum dots (QDs) as a fluorescent Cu2+ ion probe were synthesized using thiacalix[4]arene carboxylic acid (TCC) as a surface coating agent. Hydrophobic trioctylphosphine oxide (TOPO) capped CdSe/ZnS QDs were overcoated with TCC in tetrahydrofuran at room temperature, and deprotonation of the carboxyl groups of TCC resulted in the formation of water-soluble QDs. The surface structure of the QDs was characterized by using transmission electron microscopy (TEM) and fluorescence correlation spectroscopy (FCS). TEM images showed that TCC-coated QDs were monodispersed with the particle size (core-shell moiety) of approximately 5 nm. Hydrodynamic diameter of the TCC-coated QDs was determined to be 8.9 nm by FCS, showing that the thickness of the surface organic layer of the QDs was approximately 2 nm. These results indicate that the surface layer of TCC-coated QDs forms a bilayer structure consisting of TOPO and TCC molecules. TCC-coated CdSe/ZnS QDs were highly fluorescent (quantum yield, 0.21) compared to the QDs surface-modified with mercaptoacetic acid and mercaptoundecanoic acid. Fluorescence of the TCC-coated QDs was effectively quenched by Cu2+ ions even in the presence of other transition metal ions such as Cd2+, Zn2+, Co2+, Fe2+, and Fe3+ ions in the same solution. The Stern-Volmer plot for the fluorescence quenching by Cu2+ ions showed a linear relationship up to 30 microM of Cu2+ ions. The ion selectivity of TCC-coated QDs was determined by measurements of fluorescence responses towards biologically important transition metal ions (50 microM) including Fe2+, Fe3+, Co2+>Zn2+, Cd2+. The fluorescence of TCC-coated QDs was almost insensitive to other biologically important ions such as Na+, K+, Mg2+, and Ca2+, suggesting that TCC-coated QDs can be used as a fluorescent Cu2+ ion probe for biological samples. A possible quenching mechanism by Cu2+ ions was also discussed on the basis of a Langmuir-type adsorption isotherm.     

Formation of luminescent nanocomposite assemblies via electrostatic interaction

A novel luminescent nanocomposite assembly was prepared in aqueous solutions, via the electrostatic interaction between poly(ethylene glycol)-b-poly(N,N-dimethylaminoethyl methacrylate) (PEG-b-PDMAEMA) double hydrophilic block copolymer (DHBC) and thioglycolic acid (TGA)-stabilized CdTe quantum dots (QDs). By tuning the molar ratios of QDs to DHBC, the nanocomposite assemblies could be well controlled and the dimension of these regular spherical QDs/PEG-b-PDMAEMA assemblies ranged from 40 to 75 nm in aqueous media. As the periphery of QDs/PEG-b-PDMAEMA nanocomposite assembly was composed of PEG segments when the PDMAEMA blocks and QDs were immobilized inside the assembly, the cytotoxicity of the assembly was significantly reduced, compared with that of pure PEG-b-PDMAEMA and QDs. The nanocomposite assembly also exhibited superior stability in salt solutions and remained strongly photoluminescent even when free radicals existed. Thus, the QDs/PEG-b-PDMAEMA nanocomposite assembly is potentially useful for a number of applications in biolabeling and imaging.     

Characterization of CdHgTe/CdS QDs for near infrared fluorescence imaging of spinal column in a mouse model

Near infrared (NIR) CdHgTe/CdS quantum dots (QDs) were successfully prepared by a green synthetic route. The characteristics such as morphology, size, spectra, stability and toxicity were investigated in detail. The fluorescence wavelength of CdHgTe/CdS QDs could be adjusted to the NIR range (812nm), which made the in vivo NIR imaging possible. The in vivo dynamic biodistribution of CdHgTe/CdS QDs in a mouse model was monitored by an NIR imaging system. Results indicated that CdHgTe/CdS QDs with a diameter of about 5.8nm targeted to spinal column effectively. Further imaging of the dissected spine disclosed that QDs targeted to vertebra rather than spinal cord. The high fluorescence intensity together with targeting effect makes CdHgTe/CdS QDs particular candidates for imaging purposes in experimental animal models of vertebral injury.     

CdSe包覆层数对水溶性CdTe/CdSe (II型)核壳量子点的光学特性和微观结构的影响

在水相合成的CdTe量子点的体系中通过分批次加入新鲜配制的NaHSe和CdCl2溶液,制备出了CdSe包覆层数不同的CdTe/CdSe核壳量子点,并着重考察了CdSe包覆层数对CdTe/CdSe核壳量子点的光学特性以及微观结构的影响.与CdTe量子点相比,CdSe单层包覆的CdTe/CdSe核壳量子点的吸收峰和荧光发射峰出现明显红移;随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点吸收光谱的覆盖范围向长波方向扩展,荧光发射峰强度逐步下降,荧光寿命大幅延长,体现出Ⅱ型核壳量子点的特征.X射线衍射(XRD)分析表明,随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点的粉末衍射峰由CdTe衍射峰位置逐步向CdSe衍射峰位置靠近.CdTe/CdSe核壳量子点因其延伸到近红外区域的宽吸收特性致使其在太阳电池领域具有重要的应用前景.     

(CdSe)ZnS quantum dots and organophosphorus hydrolase bioconjugate as biosensors for detection of paraoxon

In this paper, we first report a novel biosensor for the detection of paraoxon based on (CdSe)ZnS core-shell quantum dots (QDs) and an organophosphorus hydrolase (OPH) bioconjugate. The OPH was coupled to (CdSe)ZnS core-shell QDs through electrostatic interaction between negatively charged QDs surfaces and the positively charged protein side chain and ending groups (-NH2). Circular dichroism (CD) spectroscopy showed no significant change in the secondary structure of OPH after the bioconjugation, which indicates that the activity of OPH was preserved. Detectable secondary structure changes were observed by CD spectroscopy when the OPH/QDs bioconjugate was exposed to organophosphorus compounds such as paraoxon. Photoluminescence (PL) spectroscopic study showed that the PL intensity of the OPH/QDs bioconjugate was quenched in the presence of paraoxon. The overall quenching percentage as a function of paraoxon concentration matched very well with the Michaelis-Menten equation. This result indicated that the quenching of PL intensity was caused by the conformational change in the enzyme, which is confirmed by CD measurements. The detection limit of paraoxon concentration using OPH/QDs bioconjugate was about 10(-8) M. Although increasing the OPH molar ratio in the bioconjugates will slightly increase the sensitivity of biosensor, no further increase of sensitivity was achieved when the molar ratio of OPH to QDs was greater than 20 because the surface of QDs was saturated by OPH. These properties make the OPH/QDs bioconjugate a promising biosensor for the detection of organophosphorus compounds.     

Transparent polymeric hybrid film of ZnO nanoparticle quantum dots and PMMA with high luminescence and tunable emission color

ZnO nanoparticle quantum dots (QDs)/poly(methyl methacrylate) (PMMA) composites are synthesized by conventional radical polymerization in the presence of 3-(trimethoxysilyl)propylmethacrylate (TPM)-modified ZnO nanoparticle QDs. Although unmodified ZnO nanoparticle QDs were precipitated in tetrahydrofuran (THF) and show only weak emissions under UV irradiation, ZnO nanoparticle QDs/PMMA composite is well dispersed in THF and shows high emissions. TPM acts as the stabilizer and promotes the compatibility between the ZnO nanoparticle QDs and the PMMA matrix. After evaporation of THF from the ZnO nanoparticle QDs/PMMA composite solution, transparent polymeric hybrid films of ZnO nanoparticle QDs and PMMA are obtained. These polymeric hybrid films are characterized by photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis. The hybrid film exhibited a high quantum yield and PL emission under ultraviolet excitation. PL emission has been successfully tuned from blue to yellow.     

A Facile Strategy to Fabricate Thermoresponsive Polymer Functionalized CdTe/ZnS Quantum Dots: Assemblies and Optical Properties

Novel thermoresponsive CdTe/ZnS quantum dots (QDs) decorated with a copolymer ligand (CPL) containing 8‐hydroxyquinoline and NIPAM units are prepared through coordinate bonding in aqueous solution. The dependence of the morphology and optical properties of the QDs/CPL assemblies formed via coordinate bonding on the experimental conditions is studied. The coordinate induced self‐assemblies are observed by controlling the molar ratio of QDs and CPL. The self‐organized structure of QDs/CPL proceeds through a first step of QDs‐chains, followed by a necklace‐like single annular chain, and subsequently increases its annular chain structure, forming a network. The CPL functionalized QDs can emit multiple colors from the cooperating interaction between the inherent emission (606 nm) of the QDs and the surface‐coordinated emission (517 nm) of the CPL complex formed on the QD surface. For QDs‐CPL systems, both Förster resonance energy transfer (FRET) and a high rate of photoinduced electron transfer (PET) are simultaneous, the latter mainly contributing to PL quenching. The thermoresponsive QDs/CPL assemblies also exhibit dual reversible PL properties between the inherent emission of QDs and surface‐coordinated emission.

     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

Quantitative Photoelectrochemical Detection of Biotin Conjugated CdSe/ZnS Quantum Dots on the Avidin Immobilized ITO Electrodes

Photocurrent generation from CdSe/ZnS (core/shell) quantum dots (QDs) in a photoelectrochemical cell was proposed to perform a bioaffinity biosensor in this study. The photocurrent of QDs is reversible and methylene blue as an electron transfer mediator causes a four‐fold increase in the photocurrent. We further present quantitative photoelectrochemical detection of biotin conjugated QDs on the avidin immobilized ITO electrodes. A linear calibration graph was obtained in the range of 4 and 18 nM of biotin conjugated QDs with a coefficient of determination of 0.997. Results imply that QDs can be successfully used as photoelectroactive labels for the photoelectrochemical biosensor systems.     

Impact of dendritic interface modifiers on phase behavior of polyvinylcarbazol-CdSe/ZnS nanocomposite films

The phase behavior of mixtures of poly(9-vinylcarbazol) (PVK) and CdSe/ZnS quantum dots (QDs) were studied depending on the nature of the surfactant used as QDs shell, namely, “native surfactant” (NS) originated from the QDs synthesis, and specially designed two-component interface modifiers comprising of dendritic phosphonic acids possessing alkyl- or cyano-terminal groups and hexyl phosphonic acid as a cosurfactant. It is shown, that the nature of interface modifier dramatically influence on distribution of QDs in the nanocomposite film. Thus, both the “native surfactant” and alkyl-containing dendritic interface modifiers favors to phase segregation of QDs in the resulting nanocomposites where two-dimensional aggregates are localized near-surface layer of the PVK film. In contrast, the cyano-containing dendritic interface modifier provides the homogeneous QDs distribution through the film thickness. We determined that the concentration quenching of QDs photoluminescence is observed for PVK/QD(NS) film. For PVK films containing QDs grafted with dendritic surfactants, the luminescent intensities increase vs QD concentration up to 80–85 wt%.     

Identification of cadmium containing metabolites in HepG2 cells after treatment with cadmium-selenium quantum dots

The transformation of quantum dots (QDs) by organisms has attracted broad attention but remains unclear. Understanding of the metabolites helps to reveal the transformation pathway of QDs. Cd containing-metallothionein (MT) are the main species formed by Cd released from CdSe QDs in HepG2 cells, while speciation analysis of Cd containing MTs remains a challenge because MTs has several subisoforms and can bind with several metals. Herein, we built a hyphenated platform for speciation analysis of QDs in HepG2 cells after treatment with CdSe/ZnS QDs. The Cd-containing MTs were separated in reversed phase high performance liquid chromatography (RP-HPLC) and subsequently online detected by inductively coupled plasma mass spectrometry (ICP-MS) and electrospray ionization quadrupole time-of-flight mass spectrometry (ESI-Q-TOF-MS) parallelly. Four groups of Cd-containing metabolites were found by detecting Cd in ICP-MS. Their structures were identified in ESI-Q-TOF-MS and further confirmed with standards of four subisoforms of MT, including N-terminal acetylation MT2a, N-terminal acetylation MT1e, N-terminal acetylation MT1g and MT1m. Each group of them contains various stoichiometry of Cd/Zn. The metabolites of QDs remain same while the concentrations of each metabolite and its stoichiometry of Cd/Zn vary for different incubation concentration/time. This work provides a new parallel hyphenation technique of HPLC-ICP-MS/ESI-MS with high separation resolution and powerful detection ability, and the obtained results provide detailed metabolism information of QDs in HepG2 cells after treatment of CdSe/ZnS QDs, contributing to deep exploration of the functional mechanisms of QDs in organisms.