Bacillus subtilis assisted assembly of gold nanoparticles into long conductive nodous ribbons

Gold nanopraticles with diameters of about 20 nm were assembled onto the surfaces of Bacillus subtilis by keeping the mixture of the nanoparicles and the bacteria in the dark without disturbance for over a month. During the aging process, the bacteria connected to each other end-to-end to form long wires and gold nanoparticles were coated compactly onto the surfaces of the wires simultaneously. The resulting composite wires were collapsed into ribbons with a width of about 1 microm after drying in air. The ribbons present a novel structure with nodes on their backbones and have lengths of several millimeters. They are conductive and showed Ohmic behavior, which provides potential applications in the fabrication of electronic nanodevices.     

Photofragmentation of phase-transferred gold nanoparticles by intense pulsed laser light

Gold nanoparticles with an average diameter of approximately 20 nm were prepared in an aqueous solution by a wet chemistry method. The parent gold nanoparticles were then capped with a 4-aminothiophenol protecting layer and transferred into toluene by tuning the surface charge of the modified nanoparticles. Gold nanoparticles before and after phase transfer were subjected to photofragmentation by a pulsed 532 nm laser. The effects of solvent properties and surface chemistry on the photofragmentation of the gold nanoparticles have been investigated. Fast photofragmentation has been observed in the organic solvent in which the dielectric constant, heat capacity, and thermal conductivity are lower. The results suggest new approaches for the preparation of very small gold clusters from gold nanoparticles.     

Electrochemical nucleation of gold nanoparticles in a polymer film at a liquid-liquid interface

Simultaneous nucleation of gold nanoparticles and polymerization of tyramine has been carried out at an immiscible electrolyte interface. By transferring the gold ion of tetraoctylammoniumtetracloroaurate (TOAAuCl(4)) from the organic to the aqueous phase, a fast homogeneous electron transfer from the tyramine monomer reduces the gold ion. Electropolymerization then proceeds, and gold nanoparticles form. The newly formed nanoparticles act as nucleation sites for the deposition of the oligomers/polymer (and possibly vice versa). This results in gold nanoparticles stabilized in a polytyramine matrix. The size of the nanoparticles is controlled by the concentration of oligomers/polymer in solution. The polymer nanoparticle composite film was analyzed with TEM, XPS, and AFM.     

DNA-templated magnetic nanowires with different compositions: fabrication and analysis

The structure and magnetic properties of different types of templated wires are compared in this study. A long DNA molecule was used to guide the assembly of pyrrolidinone-capped Fe2O3 and CoFe2O3 particles as well as polylysine-coated gold nanoparticles. The resulting DNA-templated wires were stretched onto silicon oxide surfaces using a receding meniscus procedure. The coated, stretched, and surface-bound wires were characterized using atomic force microscopy (AFM), magnetic force microscopy (MFM), and spectroscopic methods. The results with respect to the wire properties were correlated with those determined from the bulk properties of the nanoparticles and with the properties of the bulk DNA. The MFM measurements allowed us to visualize the formation of domains along the wires as well as qualitatively compare the magnetic properties of each templated structure.     

Architecture of linear arrays of fluorinated co-oligomeric nanocomposite-encapsulated gold nanoparticles: a new approach to the development of gold nanoparticles possessing an extremely red-shifted absorption characteristic

Fluoroalkyl end-capped co-oligomeric nanoparticles, which were prepared by the reaction of fluoroalkanoyl peroxide with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and 1-hydroxy-5-adamantylacrylate (Ad-HAc), were applied to the preparation of novel fluorinated co-oligomeric nanocomposite-encapsulated gold nanoparticles. These fluorinated gold nanocomposites were easily prepared by the reductions of gold ions with poly(methylhydrosiloxane) (PMHS) in the presence of the corresponding fluorinated nanoparticles and tri -n-octylamine (TOA) in 1,2-dichloroethane (DE) at room temperature. These fluorinated gold nanoparticles were isolated as wine-red powders and were found to exhibit good dispersibility in a variety of traditional organic solvents such as DE, methanol, and t-butyl alcohol to afford transparent wine-red solutions. The morphology and stability of these fluorinated co-oligomeic nanocomposite-encapsulated gold nanoparticles were characterized using transmission electron microscopy (TEM), dynamic light scattering measurements (DLS), and UV-vis spectroscopy. DLS measurements and UV-vis spectroscopy showed that these particles are nanometer-size-controlled very fine nanoparticles (185-218 nm) that exhibit a plasmon absorption band at around 530 nm. TEM images also showed that gold nanoparticles are tightly encapsulated into fluorinated co-oligomeric nanoparticle cores. Interestingly, these fluorinated co-oligomeric nanocomposites-encapsulated gold nanoparticles were found to afford linear arrays of these fluorinated nanoparticles with increases in the feed amounts of TOA. More interestingly, these fluorinated gold nanoparticles were able to afford the extremely red-shifted plasmon absorption band at around 960 nm.     

Photorelease of carboxylic acids mediated by visible-light-absorbing gold-nanoparticles

Visible-light-absorbing citrate-stabilized gold nanoparticles and tryptophan-dithiane-conjugate-stabilized gold nanoparticles have been used to mediate electron transfer between dithiothreitol (DTT), a good electron donor, and an N-methylpicolinium ester in aqueous solution. Quantitative yield of the free carboxylate has been obtained with quantum yields of release, Phirel, ranging from 0.5 to 4.5.     

Synthesis,Characterization and Self-assembly of Gold-coated Iron Nanoparticles

Due to their small size (1-100 nm), nanoparticles exhibit novel materials properties that differ considerably from those of the bulk solid state. Especially in recent years, the interests in nanometer-scale magnetic particles are growing based on their potential application as high density magnetic storage media. A unique reverse micelle method has been developed to prepare gold-coated iron nanoparticles. XRD, UV/vis, TEM and magnetic measurements are used to characterize the nanocomposites. XRD only gives FCC paterns of gold for the obtained nanoparticles. There is a red shift and broadening of Au@Fe colloid relative to pure gold colloid in the absorption spectra. TEM results show that the average size of Au@Fe nanoparticle is about 10 nm. These nanoparticles self-assembled into wires in micron level under a 0.5 T magnetic field. Magnetic measurements show that the particles are superparamagnetic with a blocking temperature of 42 K. Coercivity of the obtained nanoparticles decreases with the measuring temperature, which are 730 Oe,320 Oe and 0 at 2 K, 10 K and 300 K, respectively.     

Simple, one-step synthesis of gold nanowires in aqueous solution

A simple procedure to synthesize gold nanowires based on the reduction of hydrogen tetrachloroaurate by 2-mercaptosuccinic acid in aqueous solution is presented. This procedure requires no additional capping or reduction agent and produces wires with an apparent curly morphology several micrometers in length with diameters as thin as 15 nm. Some of the wires produced end in a ribbonlike structure, finally terminated by a flat triangular prism. Investigations by scanning electron microscopy, transmission electron microscopy (bright and dark field), scanning transmission electron microscopy, and atomic force microscopy as well as conductivity measurements indicate fully connected, polycrystalline gold objects.     

Phase transfer of gold nanoparticles from aqueous to organic solution containing resorcinarene

Citrate-capped gold nanoparticles (NPs) in aqueous solution were transferred directly into the organic solution mesitylene containing C-undecylcalix[4]-resorcinarene (C11-resorcinarene). C11-resorcinarene, which has long hydrophobic tails and phenolic hydroxyl groups, acted as both a phase-transfer and a capping agent. The C11-resorcinarene-capped gold particles could be isolated and dispersed in different organic solvents. Optical absorption spectra corresponding to surface plasmon resonance provided a broad band centered at 534 nm for C11-resorcinarene-capped gold NPs in mesitylene. High-resolution transmission electron micrograph images revealed that the average particle diameter of C11-resorcinarene-capped gold NPs is approximately 12 nm.     

Photoinduced electron transfer between chlorophyll a and gold nanoparticles

Excited-state interactions between chlorophyll a (Chla) and gold nanoparticles have been studied. The emission intensity of Chla is quenched by gold nanoparticles. The dominant process for this quenching has been attributed to the process of photoinduced electron transfer from excited Chla to gold nanoparticles, although because of a small overlap between fluorescence of Chla and absorption of gold nanoparticles, the energy-transfer process cannot be ruled out. Photoinduced electron-transfer mechanism is supported by the electrochemical modulation of fluorescence of Chla. In absence of an applied bias, Chla cast on gold film, as a result of electron transfer, exhibits a very weak fluorescence. However, upon negatively charging the gold nanocore by external bias, an increase in fluorescence intensity is observed. The negatively charged gold nanoparticles create a barrier and suppress the electron-transfer process from excited Chla to gold nanoparticles, resulting in an increase in radiative process. Nanosecond laser flash experiments of Chla in the presence of gold nanoparticles and fullerene (C60) have demonstrated that Au nanoparticles, besides accepting electrons, can also mediate or shuttle electrons to another acceptor. Taking advantage of these properties of gold nanoparticles, a photoelectrochemical cell based on Chla and gold nanoparticles is constructed. A superior performance of this cell compared to that without the gold film is due to the beneficial role of gold nanoparticles in accepting and shuttling the photogenerated electrons in Chla to the collecting electrode, leading to an enhancement in charge separation efficiency.     

Preparation and Characterization of Heparin‐Stabilized Gold Nanoparticles

A simple method for preparing gold nanoparticles in aqueous solution has been developed by using glycosaminoglycan‐heparin as reducing and stabilizing agent and HAuCl₄ as precursor. The obtained gold nanoparticles were characterized by UV‐vis spectroscopy, resonance light scattering spectroscopy (RLS), transmission electron microscopy (TEM) and electrophoresis technology. The influence of reactant concentration for the preparation of gold nanoparticles was investigated. The results indicated that the gold nanoparticles carried negative charges in the aqueous solution and the size and shape of the gold nanoparticles could be controlled by changing the concentration of the heparin. Moreover, the gold nanoparticles obtained with relatively high concentration of heparin were very stable and had relative narrow size distribution.     

Biocompatibility of gold nanoparticles and their endocytotic fate inside the cellular compartment: a microscopic overview

Macrophages are one of the principal immune effector cells that play essential roles as secretory, phagocytic, and antigen-presenting cells in the immune system. In this study, we address the issue of cytotoxicity and immunogenic effects of gold nanoparticles on RAW264.7 macrophage cells. The cytotoxicity of gold nanoparticles has been correlated with a detailed study of their endocytotic uptake using various microscopy tools such as atomic force microscopy (AFM), confocal-laser-scanning microscopy (CFLSM), and transmission electron microscopy (TEM). Our findings suggest that Au(0) nanoparticles are not cytotoxic, reduce the production of reactive oxygen and nitrite species, and do not elicit secretion of proinflammatory cytokines TNF-alpha and IL1-beta, making them suitable candidates for nanomedicine. AFM measurements suggest that gold nanoparticles are internalized inside the cell via a mechanism involving pinocytosis, while CFLSM and TEM studies indicate their internalization in lysosomal bodies arranged in perinuclear fashion. Our studies thus underline the noncytotoxic, nonimmunogenic, and biocompatible properties of gold nanoparticles with the potential for application in nanoimmunology, nanomedicine, and nanobiotechnology.     

Bioconjugation of Interferon-alpha Molecules to Lysine-Capped Gold Nanoparticles for Further Drug Delivery Applications

Gold nanoparticles are potentially very attractive components for therapeutic delivery since they can be synthesized with any diameter from 1 to 200 nm to carry a payload of therapeutic molecules into a cell without triggering an immune response. Gold nanoparticles must undergo surface transformations before coupling to therapeutic molecules to become eligible for this purpose. It is now more understood that amine groups can bind to gold nanoparticles strongly, which has enabled surface modification of gold nanoparticles with amino acid lysine through its amine group. These lysine capped gold nanoparticles can further be coupled to therapeutic molecules for delivery purposes. In this study gold nanoparticles were first synthesized and capped with lysine molecules. TEM and FTIR measurements demonstrated the synthesis of lysine-capped gold nanoparticles with an average diameter of 10 nanometers. Interferon alpha molecules-one of the most important therapeutic protein were then chemically bound to lysine-capped gold nanoparticles through a two-step process of diimide-activated amidation. The conjugation of interferon molecules to lysine capped gold nanoparticles was carried out via the reaction between the free amine group of lysine and carboxyl groups of interferon using N-ethyl-N′-13-dimethyl-aminopropyl (EDAC) as a coupling agent. The process of conjugation has also been studied by transmission electron microscopy.     

Gold nanoparticles enhancing dismutation of superoxide radical by its bis(dithiocarbamato)copper(II) shell

In the past few years three topics in nanoscience have received great attention: catalytic activity of gold nanoparticles (AuNPs), their electron transfer properties, and magnetism. Although these properties could have much in common no report on their synergism has been published. Here we present 10-nm gold nanoparticles conveniently capped with a mixed self-assembled monolayer containing bis(dithiocarbamato)copper(II) complexes, which dismutate superoxide radical with extremely high efficiency (IC(50) = 0.074 μM). This behavior is interpreted as the result of an electron transfer (ET) process between AuNP core and the analyte when associated to copper(II). The ET process involving a charged AuNP core was detected by EPR and UV-vis spectroscopy.     

Versatile phase transfer of gold nanoparticles from aqueous media to different organic media

A novel, simple, and very efficient method to prepare hydrophobically modified gold particles is presented. Gold nanoparticles of different sizes and polydispersities were prepared. The diameter of the gold particles ranges from 5 to 37 nm. All systems were prepared in aqueous solution stabilized by citrate and afterwards transferred into an organic phase by using amphiphilic alkylamine ligands with different alkyl chain lengths. The chain length was varied between 8 and 18 alkyl groups. Depending on the particle size and the alkylamine, different transfer efficiencies were obtained. In some cases, the phase transfer has a yield of about 100%. After drying, the particles can be redispersed in different organic solvents. Characterization of the particles before and after transfer was performed by using UV/Vis spectroscopy, transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS) techniques. The effect of organic solvents with various refractive indices on the plasmon band position was investigated.     

Oriented immobilization of antibodies and their fragments on modified silicon for the production of nanosensors

Different methods for the covalent immobilization of specific antibodies and their fragments on a silicon surface with the subsequent formation of immune complexes that consist of an immobilized monoclonal antibody, an antigen molecule, and a molecule of a second monoclonal antibody labeled with gold nanoparticles have been studied. Prostate-specific antigen (PSA), which is a molecular biomarker for prostate cancer, was used as an antigen. A covalent conjugate of the fragments of PSA-specific antibodies with gold nanoparticles has been obtained using the thiol groups of the antibodies. Scanning electron microscopy (SEM) was used for the registration of immune complexes on the surface. The high resolution of the method made it possible to detect individual immune complexes by the presence of gold nanoparticles and to calculate their number. A new method for the chemical modification of silicon by 3-aminopropyltrimetoxysilane (APTMS) and a bifunctional reagent 1,4-phenylene diisothiocyanate (PDITC) has been developed. This method provides a uniform distribution of antigen-binding centers and their availability for the formation of immune complexes. The developed immobilization method is promising for the formation of a biospecific biosensor layer based on silicon nanowires.     

Size‐Controlled Synthesis of Highly Monodisperse Gold Nanoparticles without a Size‐Selection and Long Range Ordered 2‐D Arrangement

A simple method is used to control the size of cetyltrimethylammoniumbromide‐protected Au nanoparticles by a reversal micelle in safe organic solvent. These Au nanoparticles can be evolved to highly monodisperse Au nanoparticles capped 1‐dodecanthiol in the 2, 3, and 5 nm diameter by refluxing at～160°C for 7 hours. Their ultraviolet visible spectroscopy (UV‐vis), x‐ray diffraction (XRD, transmission electron microscopy (TEM) showed that all the three different size gold nanoparticles(NPs) displayed high size homogenous properties and easy formed large areas of long ordered two‐dimensional arrangement at the air/solid interface.     

Direct synthesis of branched gold nanocrystals and their transformation into spherical nanoparticles

We report a facile synthesis of branched gold nanocrystals by the addition of a suitable amount of NaOH to an aqueous solution of cetyltrimethylammonium bromide (CTAB), HAuCl(4), and ascorbic acid. The branched nanocrystals were formed within minutes of reaction and showed monopod, bipod, tripod, and tetrapod structures. They are crystalline and have smooth surfaces. These gold multipods are kinetically controlled products and are thermodynamically unstable. The branched nanocrystals quickly transformed into spherical nanoparticles within 1 h of reaction, and the process was essentially complete after 2 days. The morphological transformation has been monitored by both UV-vis absorption spectroscopy and electron microscopy. The appearance of two major absorption bands for the branched gold nanocrystals eventually became only a single band at 529 nm for the spherical nanoparticles. The resulting nanoparticles are single crystals with diameters of 20-50 nm and do not show a faceted structure. When the freshly prepared branched nanocrystals are kept in a refrigerator at 4 degrees C, their multipod structure can be preserved for over a month without significant spectral shifts.     

Microbial synthesis of gold nanoparticles: Current status and future prospects

Gold nanoparticles have been employed in biomedicine since the last decade because of their unique optical, electrical and photothermal properties. Present review discusses the microbial synthesis, properties and biomedical applications of gold nanoparticles. Different microbial synthesis strategies used so far for obtaining better yield and stability have been described. It also includes different methods used for the characterization and analysis of gold nanoparticles, viz. UV–visible spectroscopy, Fourier transform infrared spectroscopy, X ray diffraction spectroscopy, scanning electron microscopy, ransmission electron microscopy, atomic force microscopy, electron dispersive X ray, X ray photoelectron spectroscopy and cyclic voltametry. The different mechanisms involved in microbial synthesis of gold nanoparticles have been discussed. The information related to applications of microbially synthesized gold nanoparticles and patents on microbial synthesis of gold nanoparticles has been summarized.     

Molecular wire formation from viologen assemblies

The adsorption behavior of viologen alpha,omega-dithiols (viologen dithiols) on gold has been investigated. At short exposures, a low-coverage phase consisting of flat-lying molecules has been determined by STM and IR spectroscopy. In contrast, multilayer films are formed after long adsorption times. Single molecular wires could be formed between a gold STM tip and a surface with a low coverage of the adsorbed dithiols, and their electrical behavior was investigated. Molecular conductivity was determined either by the repeated measurement of I(s) curves or by recording I-V curves for different tip-sample separations. These methods concurred in producing a value of (0.5 +/- 0.1) nS for the single-molecule conductivity of the alpha,omega-viologen dithiol molecule HS-6V6-SH. The high conductivity of HS-6V6-SH, as compared to that of HS-C12-SH, may be related to the low-lying LUMO, which provides a barrier indentation for electron transport in a two-step electron-transfer mechanism.