聚合物互通多孔材料的乳液模板法制备及其功能化研究*

本文对近年来利用乳液模板制备聚合物互通多孔材料的研究进行了综述,主要介绍以高内相乳液模板制备互通多孔聚合物整体柱和利用双重乳液 (或称多重乳液) 制备多孔或多空聚合物微球的进展;分析目前多孔聚合物材料研究中存在的问题及其研究动态;讨论合成多孔聚合物材料的性能缺陷及其表面功能化改性的相关研究;并对聚合物互通多孔材料潜在的应用和研究前景进行了展望。     

Transforming Porous Organic Cages into Porous Ionic Liquids via a Supramolecular Complexation Strategy

Porous liquids are a type of porous materials that engineer permanent porosity into unique flowing liquids, exhibiting promising functionalities for a variety of applications. Here a Type I porous liquid is synthesized by transforming porous organic cages into porous ionic liquids via a supramolecular complexation strategy. Simple physical mixing of 18‐crown‐6 with task‐specific anionic porous organic cages affords a porous ionic liquid with anionic porous organic cages as the anionic parts and 18‐crown‐6/potassium ion complexes as the cationic parts. In contrast, mixing of 15‐crown‐5 and anionic porous organic cages in a 2:1 ratio gives only solids, while the addition of excess 15‐crown‐5 affords a Type II porous liquid. The permanent porosity in the cage‐based porous liquids has been also confirmed by molecular simulation, positron (e⁺) annihilation lifetime spectroscopy, and enhanced gas sorption capacity compared with pure crown ethers.     

固体渗硼提高多孔炭抗氧化性能的研究

空气中多孔炭在高温下极易被氧化,极大地限制了其在催化领域的应用。为了提高多孔炭在高温下的抗氧化能力,以KOH化学活化法制备的多孔炭为原料,通过固体渗硼对多孔炭进行热处理。结果表明,渗硼后多孔炭表面的活性点数量明显减少,抑制了氧化性气体与多孔炭的反应,从而提高了多孔炭的抗氧化能力。并且渗剂在多孔炭中的质量分数为10%、渗剂中B4C的质量分数为25%、热处理5h时,与多孔炭原料相比,渗硼后600℃多孔炭氧化失重率由70%左右降低到20%左右,比表面积降低10%～20%,多孔炭材料的微反活性仍可达到70.25。     

一种简单前驱体预处理策略制备多孔氮化碳和负载型多孔氮化碳及其高效可见光光催化活性

作为一种非金属半导体光催化剂,石墨相氮化碳(g-C3N4)已广泛应用于水中有机污染物去除、劈裂水产氢、二氧化碳还原制碳氢化合物燃料以及选择性氧化有机合成等许多光催化领域.然而,聚集态层状结构和粉末物理状态严重限制了g-C3N4在非均相光催化反应中的实际应用.一方面,g-C3N4的聚集态层状结构限制了光生载流子的表面迁移并增加了光催化反应的传质阻力.另一方面,由于附加的固-液分离步骤,粉体g-C3N4不便于实际应用.因此,为解决g-C3N4的上述缺点,一些研究已经进行并集中于g-C3N4的形貌控制合成及负载.构建多孔微观结构是合成具有优异光催化活性g-C3N4的有效途径之一.本文研究表明,盐酸或乙二醇预处理的三聚氰胺均可用作制备多孔g-C3N4的前驱体.有趣的是,由于在多孔g-C3N4制备体系中不同制孔单元的共存,与通过盐酸或乙二醇单独预处理的三聚氰胺制备的多孔g-C3N4相比,通过二者共同预处理的三聚氰胺制备的多孔g-C3N4具有更丰富的多孔微观结构.与制备负载型二氧化钛不同,由于在制备g-C3N4过程中缺少溶胶-凝胶步骤,因此负载型g-C3N4较难制备.而且,对于氟-锡氧化物(FTO)基底负载的g-C3N4,在实际应用中存在一些不足.首先,FTO基底的片状物理结构不利于反应底物的扩散.其次,FTO基底的吸光效应会导致光能损失,因此g-C3N4只能在FTO基底的单面负载.最后,在g-C3N4和FTO基底之间无化学作用,因此在光催化反应过程中不可避免造成g-C3N4的损失.因此,以盐酸/乙二醇共同预处理的三聚氰胺作原料,氢氟酸/3-氨基丙基三甲氧基硅烷共同预处理的石英棒作基底,首次制备了多孔g-C3N4和负载型多孔g-C3N4.丰富的多孔微观结构使得所制多孔g-C3N4具有优异的光催化活性;且由于多孔g-C3N4与石英棒基底间存在化学作用,因而具有相当高的稳定性.另外,由于在构建石英棒反应器之后不影响光生载流子的表面迁移和目标有机污染物的扩散,因此负载型多孔g-C3N4的光催化活性与粉体多孔g-C3N4相似.所制备多孔g-C3N4和负载型多孔g-C3N4的光催化活性通过在可见光条件下单组份有机废水的处理进行初步评价.在有机污染物降解同时产氢系统中,由于水和有机污染物之间的氧化还原反应难于进行,因此与传统的光催化降解和产氢系统相比,所制多孔g-C3N4的氢气产率和降解效率均显著降低;然而,在有机污染物降解同时产氢系统中,随着该材料光催化活性的提高,氢气产率和降解效率同时提高.这是因为光催化剂电子传递能力的提高促进了有机污染物和水之间的氧化还原反应.     

多孔硅表面性质导致电致发光的进一步论证

用荧光分光光度法现场监测多孔硅在阳极偏压下于溶液中的电致发光行为 ,该电致发光行为主要取决于多孔硅本身的表面性质 .将电致发光实验后的多孔硅样品再次电解 ,并再次进行电致发光实验 ,发现其发光性能明显改善 ;实验表明 ,多孔硅在阳极偏压下的液相电致发光机制是由表面的Si_H键氧化向导带注入电子 ,并与阳极偏压注入的价带空穴进行复合而发光 ;此外 ,还发现了多孔硅于溶液中在阳极偏压下电压调制的可见光发射行为 ,并以量子限制效应对该现象进行了解释     

Preparation of novel porous carbon spheres from corn starch

Irregular porous carbon spheres were successfully prepared from Na₂SnO₃ coated corn porous starch by carbonization. The product was characterized with X-ray diffraction and scanning electron microscope (SEM). It is verified that the irregular porous carbon spheres are composed of disordered carbon, and the skeleton and pores of the corn porous starch was well preserved after carbonization. The pore size of the irregular porous carbon spheres is almost the same, which is similar to that of the porous starch. And the pore size decreases from about 0.91 μm to 0.53 μm measured from the SEM pictures. The texture of the irregular porous carbon spheres is mainly determined by that of porous starch.     

超疏水多孔硅的制备及表面稳定性

在加热条件下采用氢化硅烷化反应对多孔硅表面进行改性, 通过扫描电子显微镜、 红外光谱及元素分析等手段表征了多孔硅改性前后的结构和组成, 研究了不同反应时间对其性能的影响. 结果表明, 反应3 h后制得了超疏水表面的多孔硅, 其在碱性及空气环境中具有良好的稳定性.     

Capillary condensation in porous materials. Hysteresis and interaction mechanism without pore blocking/percolation process

We have performed measurements of boundary hysteresis loops, reversal curves, and subloops in p+-type porous silicon, a porous material composed of straight non-interconnected pores. These data show that a strong interaction mechanism exists between the pores. The pores of porous silicon are non-independent, whereas they are not interconnected. This hysteretic behavior is very similar to that observed in porous glass, which consists of cavities connected to each other by constrictions. This questions the so-called pore blocking/percolation model developed to explain the behavior of fluid in porous glass. More generally, if we disregard the shape of the boundary hysteresis loops which depends on the porous material (H1 for MCM-41 and SBA-15, H2 for porous glass and p+-type porous silicon), the hysteretic features inside the main loop are qualitatively the same for all these porous systems. This shows that none of these systems are composed of independent pores. A coupling between the pores is always present whether they are interconnected or not and whatever the shape of the main loop is.     

Sol–gel derived ZnO/porous silicon composites for tunable photoluminescence

ZnO/porous silicon nanocomposites were fabricated by spin-coating the sol?Cgels of zinc acetate onto the top surface of porous silicon films. The photoluminescent properties of ZnO/porous silicon nanocomposites were investigated as a function of the concentration of zinc cations in the sol?Cgels. Characterizations with scanning electron microscopy, X-ray diffractometry and photospectroscopy indicated that ZnO nanocrystals were embedded into the spongy nanostructures of porous silicon after heat treatment at 245?°C for 20?min in air. The recorded photoluminescence exhibited that orange to green?Cblue emissions were achieved for the ZnO/porous silicon nanocomposites as the concentration of zinc cations in the sol?Cgels increased from 4 to 260?mM. The mechanisms on the tunability of the photoluminescence were discussed for the ZnO/porous silicon nanocomposites. Our results have demonstrated that the incorporation of green?Cblue phosphors into the porous matrix of porous silicon represents one endeavor to tune the photoluminescence of porous silicon across the visible spectral region.     

Porous ionic liquids: synthesis and application

Solidification of fluidic ionic liquids into porous materials yields porous ionic networks that combine the unique characteristics of ionic liquids with the common features of polymers and porous materials. This minireview reports the most recent advances in the design of porous ionic liquids. A summary of the synthesis of ordered and disordered porous ionic liquid-based nanoparticles or membranes with or without templates is provided, together with the new concept of room temperature porous ionic liquids. As a versatile platform for functional materials, porous ionic liquids have shown widespread applications in catalysis, adsorption, sensing, actuation, etc. This new research direction towards ionic liquids chemistry is still in its early stages but has great potential.     

Preparation of porous materials with ordered hole structure

This review paper investigates the synthesis of porous structures with controlled hole pattern and provides an overall view of the various factors involved when synthesizing such porous materials. The following factors are discussed: 1) various methods of synthesis to produce the porous structures; 2) materials which the porous structures are made of; 3) control of the pore structure; 4) various applications of such porous materials. The materials of the porous structures and the control of the pore structure will also be discussed separately under each different method, as these two factors are closely dependent on the method of fabrication.     

Recent advances of application of porous molecular cages for enantioselective recognition and separation

Porous materials with well‐defined pore structures have received considerable attention in the past decades due to their unique structures and wide applications. Most porous materials such as zeolites, metal‐organic frameworks, covalent organic frameworks, and porous organic polymers are extended to infinite frameworks or networks by robust covalent or coordination bonds. Porous molecular cages composed of discrete molecules with permanent cavities are an emerging class of porous material and the discrete molecules assemble into solids by weak intermolecular interaction. In comparison to porous extended solids such as metal‐organic frameworks and covalent organic frameworks, porous molecular cage solids are generally soluble in organic solvents thus allowing solution processing, making them more convenient to apply in many fields. This review mainly focuses on the recent advances of application of porous molecular cages (porous organic cages and metal‐organic cages) for enantioselective recognition and separation from 2010 to present, including gas chromatography, capillary electrochromatography, chiral fluorescent recognition, chiral potentiometric sensing, and enantioselective adsorption. Furthermore, the two important family members of porous molecular cages, porous organic cages and metal‐organic cages, are also discussed.     

Fine-tuning in size and surface morphology of rod-shaped polypyrrole using porous silicon as template

We investigated electropolymerization of polypyrrole into porous silicon template. We used three types of porous silicon templates, i.e., porous silicon with ordered macro pores, medium-sized pores and meso pores. Polypyrrole was electropolymerized from pore bottoms to pore tops in all the porous silicon templates. After removal of the templates we obtained rod-shaped polypyrrole arrays. Changing the porous silicon templates easily controlled the size of the rod-shaped polypyrrole. We also used dendritic medium-sized pores for template, and then polypyrrole rod having a roughened surface was obtained. Here we demonstrated that the size and the surface morphology of polypyrrole rod were easily tuned using porous silicon.     

Preparation and Photocatalytic Property of Porous TiO_2 Film with Net-like Framework

By the UV-curing method, a porous TiO2 film with net-like framework has been prepared. The characte-rization results of the porous TiO2 film by means of SEM, TEM, XRD, and N2 adsorption-desorption analysis show that the net-like framework of the porous TiO2 film is composed of TiO2 nanoparticles, forming three dimensional porous structure. The porous TiO2 film exhibits higher photocatalytic activity for the degradation of methylene blue(MB) dye compared with the conventional dense TiO2 film.     

预混天然气在多孔介质燃烧器中的燃烧与传热

在一台小型渐变型多孔介质燃烧器上进行了预混天然气燃烧与传热试验研究,探讨了天然气速度和多孔介质厚度对多孔介质燃烧室的温度分布、排烟温度和流动阻力的影响。结果表明,天然气在渐变型多孔介质燃烧器中燃烧稳定,燃烧室与水冷夹套间的换热受天然气速度和多孔介质厚度影响,换热效果比空管中燃烧明显增强,同时预混天然气通过多孔介质的进出口压差随着天然气速度和多孔介质厚度的增加而增加。     

不同溶剂制备的聚乳酸多孔微球的形成机理

利用改进的双乳液溶剂挥发法制备了多孔聚乳酸( PLA)微球.通过采用具有不同沸点和水溶性的有机溶剂制备得到不同多孔结构的PLA微球.结果发现以二氯甲烷、氯仿和甲苯为溶剂制备的微球具有相似的均匀多孔结构,而以乙酸乙酯制备的微球却具有中空结构和多孔的壳层.通过进一步的实验研究了溶剂种类对于微球多孔结构的影响.结果表明溶剂的...     

PoraPLOT Q: A porous layer open tubular column coated with styrene-divinylbenzene copolymer

A porous polymer is deposited on the inner wall of fused silica capillary columns. The retention characteristics of this porous polymer were evaluated and found to be comparable with Porapak Q. The porous polymer has a high retention volume which enables the separation of permanent gases at ambient temperatures or higher. The hydrophobic character of the porous polymer allows the injection of water containing samples without changing retention due to adsorption of water. The inertness of the porous polymer allows the elution of a range of apolar and polar compounds. The maximum temperature of the porous polymer was estimated to be 250°C. With this new type of capillary column, high resolution separations are obtained in combination with short analysis times.     

Comparison of core-shell versus fully porous particle packings for chiral liquid chromatography productivity

A loading and productivity study was done using three racemates on vancomycin and teicoplanin-bonded chiral stationary phases of different particle formats. Two columns were packed with 2.7 μm superficially porous particles and two columns were packed with identically bonded 5 μm fully porous particles. The last two columns were packed with specially synthesized 4.5 μm vancomycin and teicoplanin superficially porous particles. The loading of different chiral compounds showed that the columns filled with 2.7-μm chiral stationary phases were inappropriate for preparative separations due to their very low permeability which precluded high flow rates. However, columns containing 4.5 μm superficially porous (core-shell) particles were as effective for small-scale preparative chiral separations as columns filled with classical 5 μm fully porous particles. Comparing the 4.5 μm superficially porous particles and 5 μm fully porous particles teicoplanin columns, the observed respective productivities of 270 and 265 mg/g chiral phase/h for 5-methyl-5-phenyl hydantoin enantiomers were obtained. Particular attention was given to the peculiar case of the mianserin enantiomeric separation on vancomycin columns that gave observed productivities of 200 and 205 mg/g chiral phase/h on the 4.5 μm superficially porous particles and 5 μm fully porous particles, respectively.     

1.1 μm superficially porous particles for liquid chromatography. Part I: synthesis and particle structure characterization

Superficially porous particles are characterized by a non-porous particle core surrounded by a thin porous layer. Superficially porous particles have been shown to have chromatographic advantages over traditional totally porous particles by reducing the resistance to mass transfer and the eddy diffusion contributions to the theoretical plate height, particularly for biomolecule separations. Currently, 1.7 μm superficially porous particles are commercially available, but a further decrease in the particle diameter and reduction in the porous layer thickness has the potential to further improve the efficiency of the column packing material. In this study, the synthesis of smaller diameter superficially porous particles was investigated. As the particle diameter was decreased, however, synthesis parameters previously reported were rendered unsuitable due to particle agglomeration, non-uniform coating, and porous layer disintegration. Parameters such as colloidal silica size, drying process, and sintering temperature were investigated to improve the structural characteristics of smaller diameter superficially porous particles. Reported is a synthetic route for production of 1.1 μm superficially porous particles having a 0.1 μm porous layer. Based on the revised method, the particles produced have a surface area, pore diameter, and particle size distribution RSD of 52 m²/g, 71 Å, and 2.2%, respectively.     

医用多孔NiTi合金表面溶胶-凝胶法制备TiO2涂层

采用溶胶-凝胶法结合浸渍提拉工艺在多孔NiTi合金表面制备出了结构均一的锐钛矿型TiO2涂层,并在溶胶中添加聚乙二醇(PEG)作为造孔剂,进而在多孔NiTi合金表面制备出内层致密、外层多孔的TiO2复合涂层。SEM分析结果表明,TiO2涂层均匀地覆盖了多孔NiTi合金基体的外表面以及孔的内表面。Hanks溶液中的阳极极化曲线结果表明,与未处理的多孔NiTi合金相比,具有致密TiO2涂层的多孔NiTi合金其耐腐蚀性能有了显著提高。而多孔TiO2复合涂层进一步增大了多孔NiTi合金的实际表面积,提高了材料表面的生物活性。