Packed column SFC of gas oils part I: Hydrocarbon group separation using pure carbon dioxide

In this paper, the critical application of the ASTM method to hydrocarbon group separation in gas oils using conventional packed column SFC coupled to FID is described. Resolution of model compounds is studied using a recent commercial apparatus and the chromatographic conditions such as pressure, temperature, and density of the mobile phase and the nature of the stationary phase after FID detection conditions have been selected to give the best sensitivity. Three gas oils differing in composition (ratio arimatic/non-aromatic hydrocarbons)have been selected to evaluate the method for separation of the non-aromatic hydrocarbon group from mono-, di-, and polyaromatic hydrocarbons groups (sub-aromatic groups). The ASTM requiements for this analysis are very easy to obtain in adsorption chromatography. However, in adsorption or normal phase chromatography, SFC results cannot be perfect either for the quantification of aromatic and non-aromatic hydrocarbon fractions because there is still an overlap between the two groups (the separation is better in adsorption chromatography than in normal phase chromatography) or for sub-aromatic fractionation (the separation is better in normal phase chromatography than in adsorption chromatography); combination of both separation techniques only improves the sub-aromatic group fractionation. Thus, further enhancement of resolution for group and sub-group separation is needed.     

Analysis of selected ionic liquid cations by ion exchange chromatography and reversed-phase high performance liquid chromatography

The chromatographic behavior of 8 ionic liquids - 7 homologues of 1-alkyl-3-methylimidazolium and 4-methyl-N-butylpyridinium - has been investigated with a strong cation exchange adsorbent. In particular, the dependence of the retention properties of these solutes on mobile phase composition, pH, and buffer concentration was evaluated with the aim of optimizing and improving the selectivity and retention of solute separation. While using the SCX stationary phase, several interactions occurred with varying strengths, depending on the mobile phase composition. Cation exchange, nonspecific hydrophobic interactions, and adsorption chromatography behavior were observed. Reversed phase chromatography occurred at low concentrations of acetonitrile, electrostatic and adsorption interactions at higher organic modifier concentrations. Elevated buffer concentrations lowered the retention factors without affecting the selectivity of ionic liquids. Obtained results were further compared to the chromatographic behaviour of ionic liquids in the reversed phase system. All analyzed ionic liquids follow reversed-phase behavior while being separated. Much lower selectivity in the range of highly hydrophilic compounds is obtained. This suggests preferred use of ion chromatography for separation and analysis of compounds below 4 carbon atoms in the alkyl side chain.     

Temperature-responsive chromatography for the separation of biomolecules

Temperature-responsive chromatography for the separation of biomolecules utilizing poly(N-isopropylacrylamide) (PNIPAAm) and its copolymer-modified stationary phase is performed with an aqueous mobile phase without using organic solvent. The surface properties and function of the stationary phase are controlled by external temperature changes without changing the mobile-phase composition. This analytical system is based on nonspecific adsorption by the reversible transition of a hydrophilic-hydrophobic PNIPAAm-grafted surface. The driving force for retention is hydrophobic interaction between the solute molecules and the hydrophobized polymer chains on the stationary phase surface. The separation of the biomolecules, such as nucleotides and proteins was achieved by a dual temperature- and pH-responsive chromatography system. The electrostatic and hydrophobic interactions could be modulated simultaneously with the temperature in an aqueous mobile phase, thus the separation system would have potential applications in the separation of biomolecules. Additionally, chromatographic matrices prepared by a surface-initiated atom transfer radical polymerization (ATRP) exhibit a strong interaction with analytes, because the polymerization procedure forms a densely packed polymer, called a polymer brush, on the surfaces. The copolymer brush grafted surfaces prepared by ATRP was an effective tool for separating basic biomolecules by modulating the electrostatic and hydrophobic interactions. Applications of thermally responsive columns for the separations of biomolecules are reviewed here.     

Measurement of thermodynamic equilibria by chromatography

Summary After a brief recall of the chromatographic principles, the different applications of gas chromatographic measurements of thermodynamic equilibria were reviewed. Gas and liquid chromatographies are now well known and elegant methods for measuring the physicochemical properties and phase equilibrium thermodynamic constants. Although fundamentally a dynamical method and mostly known as a powerful separation technique, chromatography can be schematized by a sucession of equilbria of a chemical species partitioning between a mobile phase and a fixed liquid or solid stationary phase. It can be operated in either infinite dilution or finite concentration conditions and permits to collect a large number of data for calculating molecular interactions for solutes which are either rare or available at the trace level. Gas chromatography permits the measurement of gas adsorption isotherm, gas-liquid equilibria, molecular diffusion and interaction virials. The modelization of successive partition equuilibria occuring in the chromatographic column leads to rather simple expression of differential enthalpy, entropy, free energy of adsorption or solution, variation of heat capacity, complexation constant, second virial coefficients, gas-solid and gasliquid isotherm and also binary or ternary equilibria. The possibilities of High Performance-Liquid Chromatography to investigate adsorption from solutions and chemical equilibria are also discussed.     

Analysis of complex samples by solvating gas chromatography (supercritical fluid to gas transition)

The various forms of chromatography are primarily determined by differences in the physical state of the mobile phases. The main chromatographic categories include gas chromatography (GC), liquid chromatography, and supercritical fluid chromatography. Adjusting a temperature and pressure will change the mobile phase from liquid to supercritical fluid to gas, with concomitant changes in their physical properties. In this paper, the technique transition-phase chromatography (TPC) is described. In TPC, different mobile phase conditions exist inside the column. This phase transformation within the column results in huge differences in density, solvating power, viscosity, diffusivity, and, as a consequence, in the chromatographic properties of the mobile phase. TPC experiments using capillary columns packed in our laboratory have shown that when the mobile phase is transformed from supercritical fluid to gas, high column efficiencies can be achieved. The transition from supercritical fluid to gas (also called solvating GC), a particular case of the TPC, is evaluated for the separation of complex real samples (environmental, food, and fuels).     

以亚临界水为流动相的高效液相色谱方法的进展

由于纯水在高温高压下形成亚临界液体水时氢键网络发生改变,导致其极性、粘度等物理性质产生较大的变化。以亚临界水为流动相的高效液相色谱方法(SubWC)是近年来发展起来的一种新型分离技术。SubWC的仪器系统可以采用通过改装的一般的气相色谱(GC)或液相色谱(LC)装置;分离色谱柱既可以采用液相色谱填充柱,也可以采用类似于GC的毛细管柱;选择性既可以通过调节柱系统的温度和压力,也可以通过在流动相中添加有机调节剂或盐类进行调节;检测既可用氢火焰离子化检测器检测,也可用紫外检测器检测,极大地拓宽了色谱分离和最佳条件选择的范围。SubWC无论在仪器系统、流动相的洗脱还是固定相的选择等方面均有一定的特征。这种新的分离模式目前尚处于研究与开发阶段,且多用于极性、中等极性样品的快速分离。     

Water vapor as a carrier gas in capillary gas chromatography

The use of water vapor as carrier gas in capillary chromatography is analyzed. Under equivalent conditions, a comparison of water vapor and helium as a mobile phase was performed during the separation of diesel fuel components. The advantage of water vapor was demonstrated. The resolutions of peaks were calculated for a pair of substances, C₁₈-iso and C₂₀ (4.4 for water vapor and 3.9 for helium). The Van Deemter dependences were measured, and it was demonstrated that the substantially lower viscosity of the water vapor compared to helium makes it possible to perform the separation of substances in a broader range of linear velocities, comparable to hydrogen used as mobile phase. The prospects for using water vapor was demonstrated in chromatographic analysis of hydrocarbons.     

Screening of macrocycles retention for microplanar analytical devices involving host-guest interactions and silica or octadecylsilica adsorbents

This paper reports planar chromatographic behavior and multivariate characterization of three types of macrocyclic compounds: cyclodextrins, calixarenes and macrocyclic antibiotics. Additionally two non-macrocyclic chemicals (estriol and pyrene) were analyzed as the reference retention markers. Target compounds were chromatographed using normal and reversed-phase systems and involving mono as well as binary water-organic liquids mobile phases based on methanol, ethanol and acetonitrile. Non-forced flow TLC/HPTLC elution was performed under isothermal (elevated temperature?=?303?K) and mobile phase vapor saturated conditions using 10?cm long glass plates positioned vertically inside temperature controlled Dewar type chambers. It is hoped that presented retention data, which were collected for the whole range of binary mobile phases compositions (0–100%) may be useful for designing of hybrid active layers for extraction, separation and detection systems involving host-guest interactions. Retention profiles were inspected using multivariate statistics (principal component analysis, PCA). Based on reported data various extraction and separation systems can be created where weak or strong interactions of macrocycles with chromatographic stationary phases or given micro device active supports should be expected. Particularly, studied macrocycles can be applied as selective additives for solid phase adsorption (SPE, SPME), microfluidic paper devices (μPAD) as well as micro-total analytical systems (μTAS), where bars formed active layers are fabricated.     

金属有机骨架及其复合材料在分离领域中的应用进展

金属有机骨架（MOFs）是一类由无机金属离子与有机配体自组装形成的新型有机-无机杂化多孔材料,因具有比表面积超高、结构多样、热稳定性良好、孔道尺寸和性质可调等优势,在分离领域表现出重要的应用价值。然而,采用传统方法制备的MOFs多为粒径在微米或亚微米尺度的晶体,且颗粒形貌不规则,因此限制了MOFs在样品前处理和色谱固定相等领域的应用和发展。构建基于MOFs的复合材料是弥补MOFs应用缺陷的一项有效措施,有望在保留MOFs优越的分离特性的同时,引入基体材料的特定性能。该文简要综述了近年来MOFs及其复合材料在吸附、样品前处理和色谱固定相等分离领域中的应用进展,并对MOFs在分离科学中的应用前景做出展望。     

Effect of Chamber Gas Phase on Mobile Phase pH and on Separation Efficiency in TLC. A New Mode of Chromatography

A new variant of thin-layer chromatography (TLC), based on a gradual change of mobile phase acidity during elution, is proposed. The pH change occurs in the mobile phase moving along the TLC plate as a result of its contact with an acidic or a basic gas phase that replaces the initial mobile phase vapor in the TLC chamber. The potential of this approach has been demonstrated by using carbon dioxide and ammonia gases to improve the resolution of benzoic acids and aromatic amines on polyamide TLC plates.     

Planar chromatographic method development using the PRISMA optimization system and flow charts

This study presents a modern planar chromatographic method-development procedure, based on the "PRISMA" optimization system, in which the optimum separation is achieved systematically and the structures and properties of the substances to be separated are not known. The procedure consists of three stages. In the first of these the basic conditions the stationary phase, vapor phase, and individual solvents are selected with a TLC procedure (generally in nonsaturated chromatographic chambers). In the second stage, the optimum combination of the selected solvents is determined with the PRISMA model. The third part of the procedure includes the selection of the development mode (circular, linear, or anticircular); the selection of an appropriate forced-flow chromatographic technique (over-pressured layer chromatography or rotation planar chromatography) with high-performance thin-layer chromatographic plates; the transfer of the optimized mobile phase to the various analytical, planar, or column preparative liquid chromatographic techniques; and the selection of the operating conditions. For practical reasons, the optimization process is presented with the help of flow charts.     

Preparation of imidazole-functionalized silica by surface-initiated atom transfer radical polymerization and its application for hydrophilic interaction chromatography

A novel imidazole-functionalized stationary phase for hydrophilic interaction chromatography (HILIC) was prepared via surface-initiated atom transfer radical polymerization (SI-ATRP). 1-Vinylimidazole as a monomer was polymerized on the surface of initiator-immobilized silica by SI-ATRP using CuCl and 2,2'-bipyridyl as a catalyst. The graft chain length and polymer grafting density were controlled by varying the ratio of monomer to initiator. The resulting materials were characterized by elemental analysis and thermogravimetric analysis. Then, high-performance liquid chromatography separation of eight nucleobases/nucleosides was performed on the imidazole-functionalized chromatographic column in HILIC mode. The effects of mobile phase composition, buffer pH, and column temperature on the separation of nucleobases/nucleosides were investigated, and the retention mechanisms were studied. Chromatographic parameters were calculated, and the results showed that surface adsorption through hydrogen bonding and electrostatic interaction dominated the retention behavior of the solutes in HILIC mode. Lastly, the stationary phase was successfully used to determine the nucleobases and nucleosides from Cordyceps militaris.     

Chromatographic and adsorption properties of the mixed stationary phase poly(1-trimethylsilyl-1-propyne)/poly(1-phenyl-1-propyne)

Adsorption and chromatographic properties of the mixed stationary phase poly-(1-trimethylsilyl-1-propyne)/poly(1-phenyl-1-propyne) (PTMSP/PPP) composed as 97: 3 by weight have been investigated by methods of low-temperature nitrogen adsorption and gas chromatography on packed columns. The resultant phase has uniform mesoporous structure. The chromatographic properties of the mixed phase are significantly different from the properties of the original porous polymers PTMSP and PPP. The adsorbent obtained by modifying Chromosorb P NAW with a mixture of polymers provides the selective separation of chlorosubstituted, saturated, and aromatic hydrocarbons.     

阴离子交换整体柱对蛋白质的分离与纯化

分别用乙二胺、二乙胺、三乙胺将自制的以甲基丙烯酸缩水甘油酯(GMA)为单体、乙二醇二甲基丙烯酸酯(EDMA)为交联剂的整体柱修饰为弱、强阴离子交换整体柱。考察了该整体柱的性能,选择出分离蛋白质(牛血清白蛋白、溶菌酶和谷胱甘肽)的最佳实验条件,并在最佳分离条件下考察了这些蛋白质在整体柱上的色谱行为和该整体柱对纤维素降解酶的分离纯化情况。实验结果表明,该整体柱性能良好,可以实现对纤维素降解酶的快速分离与纯化。同时,实验也证明采用梯度洗脱可以实现对某些蛋白质的分离纯化。     

Modeling of overloaded gradient elution of nociceptin/orphanin FQ in reversed-phase liquid chromatography

The Reversed-phase (RP) gradient elution chromatography of nociceptin/orphanin FQ (N/OFQ), a neuropeptide with many biological effects, has been modeled under linear and non-linear conditions. In order to do this, the chromatographic behavior has been studied under both linear and nonliner conditions under isocratic mode at different mobile phase compositions--ranging from 16 to 19% (v/v) acetonitrile (ACN) in aqueous trifluoracetic acid (TFA) 0.1% (v/v)-on a C-8 column. Although the range of mobile phase compositions investigated was quite narrow, the retention factor of this relatively small polypeptide (N/OFQ is a heptadecapeptide) has been found to change by more than 400%. In these conditions, gradient operation resulted thus to be the optimum approach for non-linear elution. As the available amount of N/OFQ was extremely reduced (only a few milligrams), the adsorption isotherms of the peptide, at the different mobile phase compositions examined, have been measured through the so-called inverse method (IM) on a 5 cm long column. The adsorption data at different mobile phase compositions have been fitted to several models of adsorption. The dependence of the isotherm parameters on the mobile phase composition was modeled by using the linear solvent strength (LSS) model and a generalized Langmuir isotherm that includes the mobile phase composition dependence. The overloaded gradient separation of N/OFQ has been modeled by numerically solving the equilibrium-dispersive (ED) model of chromatography under a selected gradient elution mode, on the basis of the previously determined generalized Langmuir isotherm. The agreement between theoretical calculations and experimental overloaded band profiles appeared reasonably accurate.     

高效液相色谱法拆分硅氟唑对映体

在纤维素-三-(3,5-二甲基苯基氨基甲酸酯)(Chiralcel OD-H)手性柱上对硅氟唑对映体的分离进行了研究.考察了流动相中改性剂的种类和浓度、流速以及柱温对分离效果的影响,并对手性拆分机制进行了讨论.实验结果表明:5种醇改性剂中,异丙醇的改性效果最佳,当异丙醇含量为2%时,分离度(Rs)达最大值10.19;在...     

Column properties and flow profiles of a flat, wide column for high-pressure liquid chromatography

The design and the construction of a pressurized, flat, wide column for high-performance liquid chromatography (HPLC) are described. This apparatus, which is derived from instruments that implement over-pressured thin layer chromatography, can carry out only uni-dimensional chromatographic separations. However, it is intended to be the first step in the development of more powerful instruments that will be able to carry out two-dimensional chromatographic separations, in which case, the first separation would be a space-based separation, LC(x), taking place along one side of the bed and the second separation would be a time-based separation, LC(t), as in classical HPLC but proceeding along the flat column, not along a tube. The apparatus described consists of a pressurization chamber made of a Plexiglas block and a column chamber made of stainless steel. These two chambers are separated by a thin Mylar membrane. The column chamber is a cavity which is filled with a thick layer (ca. 1mm) of the stationary phase. Suitable solvent inlet and outlet ports are located on two opposite sides of the sorbent layer. The design allows the preparation of a homogenous sorbent layer suitable to be used as a chromatographic column, the achievement of effective seals of the stationary phase layer against the chamber edges, and the homogenous flow of the mobile phase along the chamber. The entire width of the sorbent layer area can be used to develop separations or elute samples. The reproducible performance of the apparatus is demonstrated by the chromatographic separations of different dyes. This instrument is essentially designed for testing detector arrays to be used in a two-dimensional LC(x) x LC(t) instrument. The further development of two-dimension separation chromatographs based on the apparatus described is sketched.     

新型碳纳米管色谱固定相制备的研究进展

碳纳米管（CNTs）作为一种新型的功能材料,具有优异的物理、化学和机械性能,已经在分析化学领域得到了广泛的关注和应用。通过填充法或原位化学气相沉积法,可制备CNTs气相色谱固定相;将CNTs沉积在硅胶微球或有机聚合物基质微球表面,可制备填充式CNTs液相色谱固定相;通过包埋共聚法将CNTs嵌入聚合物整体柱内,可制备毛细管CNTs液相色谱整体柱。本文主要综述了近年来CNTs（单壁碳纳米管和多壁碳纳米管）用于色谱固定相制备的研究现状,包括气相色谱及液相色谱,并对该领域今后的发展进行展望。     

Chromatographic behaviour of low molar-mass polyesters in normal-phase high-performance liquid chromatography

Summary The normal-phase chromatographic retention behaviour of polyesters on bare silica and on a polymer-based polyamine (PA) column has been studied with a variely of binary mobile phases under isocratic conditions. The dependence of experimental retention data on the degree of polymerization (p) and on mobile phase composition (φ) was characterized by to an approach developed by Jandera et al. The bulky repeating unit and the relatively highly polar end groups of the polyesters both had a large influence on retention behaviour. The two effects in combination explain the molar-mass-independent retention observed experimentally at a particular mobile phase composition for all the mobile phase—stationary phase combinations investigated. These conditions were found to be independent of the type of end group. End group separation on a silica column improves when the polarity of the less polar solvent is increased. End group separation is better on the PA column because of a greater difference between the adsorption energy of the alcohol and acid end groups. Better prediction of retention data on the PA column was achieved by use of an approach which assumes two different types of adsorption site. Results enabled further understanding of retention behaviour in normalphase gradient polymer-elution chromatography (NPGPEC) and explained both the dependence of the order of elution onp and differences between the end-group selectivity of different systems.