Ratiometric sensing of Hg2+ based on the calix[4]arene of partial cone conformation possessing a dansyl moiety

A new fluorescent chemosensor based on the calix[4]arene of partial cone conformation possessing a dansyl moiety has been synthesized. The chemosensor demonstrates selective optical recognition of Hg(2+) and Cu(2+) in two contrasting modes. The receptor exhibited ratiometric sensing of Hg(2+) and "ON-OFF" type of fluorescence behavior in the presence of Cu(2+). The compound behaves as a fluorescent molecular switch upon chemical inputs of Hg(2+) and Cu(2+) ions.     

Highly sensitive and selective fluorescent sensor for Zn2+/Cu2+ and new approach for sensing Cu2+ by central metal displacement

An "off-on" Zn(2+) and "on-off" Cu(2+) fluorescent chemosensor C was designed and synthesized. The binding of C and Zn(2+)/Cu(2+) is chemically reversible by the addition of EDTA disodium solution; moreover, the fluorescence emission signal of ZnC decreased with the addition of Cu(2+), demonstrating that ZnC could detect Cu(2+)via metal displacement.     

An organoselenium-based highly sensitive and selective fluorescent "turn-on" probe for the Hg2+ ion

An organoselenium-based NSe(3) type of tripodal system 2 as a Hg(2+)-selective fluorescence "turn-on" probe is described. The "turn-on" fluorescence behavior of this selenotripod 2 is significant because it depends on Hg-Se bond formation and acts as a reporting unit for this system. The system exhibits immediate response (15 s) with a subnanomolar detection limit (0.1 nM) for the Hg(2+) ion. It efficiently detects both aqueous and nonaqueous Hg(2+) at 2 nM concentration.     

An 2-(2'-aminophenyl)benzoxazole-based OFF-ON fluorescent chemosensor for Zn2+ in aqueous solution

A water-soluble fluorescent sensor, 1, based on the "receptor-spacer-fluorophore" [2-(2'-aminophenyl)benzoxazole-amide-2-picolylamine] sensor platform, demonstrates the high sensitivity for Zn(2+) with a 25-fold fluorescence enhancement upon chelation to Zn(2+) and also exhibits high selectivity to Zn(2+) over other metal ions. X-ray crystal structure of Zn(2+) complex reveals that the amide oxygen (O2) cooperates with 2-picolylamine unit (N3, N4) as a receptor bind Zn(2+).     

Efficient immobilization of a cadmium chemosensor in a thin film: generation of a cadmium sensor prototype

[reaction: see text] The development of an ion-selective chemosensor for Cd(2+) allows generation of a "real-time" sensor. Immobilization of the chemosensor on quartz was achieved in a simple monolayer and in a thin film using a polymer intermediary. As intended, the thin film contains much more chemosensor than the monolayer and provides measurable responses to aqueous Cd(2+) concentrations below 1 microM. Alkali and alkaline earth ions do not interfere with Cd(2+) sensing; Zn(2+) and Cu(2+) are potential interferents.     

Selective colorimetric sensing of mercury(II) using turn off-turn on mechanism from riboflavin stabilized silver nanoparticles in aqueous medium

A simple Hg(2+) sensor has been developed using the vitamin B2 (riboflavin) stabilized Ag nanoparticle via a "turn off"-"turn on" mechanism; both the colour and photoluminescence properties of the riboflavin solution are used as sensitizing tools showing a sensitivity up to 5 nM Hg(2+) concentration.     

A minimal core based fluorophore for selective detection of Zn(II) ions in aqueous solution and living cells

A minimal core based fluorophore was introduced as a selectively fluorescent "turn on" sensor for Zn(2+) ions in aqueous solution. Addition of Zn(2+) ions to the fluorophore generates a significant emission through a 1:1 ligand-to-metal complex. The fluorescence titration experiment of the minimal core based fluorophore with various metal ions shows that the pyromellitic diimide derivative also has the advantage of a high selectivity to Zn(2+) ions over other metals such as Ni(2+), or Co(2+), Cu(2+), Fe(3+), Fe(2+). More than 8 fold increase in the intensity of fluorescence was observed for the Zn(2+)-bound fluorophore compared to Zn-free fluorophore. Due to its small molecular size, the fluorophore was cell-permeable and successfully applied to the detection of Zn(2+) in living cells. With its relatively high sensitivity to Zn(2+) in living cells, the synthesized new fluorophore will be very useful in the studies on various biological functions of Zn(2+).     

Dual-mode unsymmetrical squaraine-based sensor for selective detection of Hg2+ in aqueous media

A novel chemosensor based on unsymmetrical squaraine dye (USQ-1) for the selective detection of Hg(2+) in aqueous media is described. USQ-1 in combination with metal ions shows dual chromogenic and "turn-on" fluorogenic response selectivity toward Hg(2+) as compared to Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Al(3+), Cu(2+), Cd(2+), Mn(2+), Fe(3+), Ag(+), Pb(2+), Zn(2+), Ni(2+) and Co(2+) due to the Hg(2+)-induced deaggregation of the dye molecule. A recognition mechanism based on the binding mode is proposed based on the absorption and fluorescence changes, (1)H NMR titration experiments, ESI-MS study, and theoretical calculations.     

Highly sensitive and selective colorimetric and off-on fluorescent probe for Cu(2+) based on rhodamine derivative

A new probe for Cu(2+) based on the Cu(2+)- induced reversible ring-opening mechanism of the rhodamine spirolactam was described. It displayed a highly selective and sensitive "turn-on" fluorescent and colorimetric response toward Cu(2+).     

Colorimetric assay for mercury (II) based on mercury-specific deoxyribonucleic acid-functionalized gold nanoparticles

A colorimetric nanoprobe-mercury-specific DNA-functionalized gold nanoparticles (Au-MSD) was developed for sensing Hg(2+). The new mercury-sensing concept relies on measuring changes in the inhibition of "non-crosslinking" aggregation of Au-MSD-induced by the folding of mercury-specific DNA strand through the thymine-Hg(2+)-thymine (T-Hg(2+)-T) coordination. In the absence of Hg(2+), a high concentration of MgCl(2) (50 mM) results in a rapid aggregation of Au-MSD because of the removal of charge repulsion. When Hg(2+) is present, the particles remain stable due to the folding of MSD functionalized on the particle surface. The assay enables the colorimetric detection of Hg(2+) in the concentration range of 0.1-10 μM Hg(2+) ions with a detection limit of 60 nM, and allows for the selective discrimination of Hg(2+) ions from the other competitive metal ions. Toward the goal for practical applications, the sensor was further evaluated by monitoring Hg(2+) in fish tissue samples.     

Absorption vs. redox reduction of Pd2+ and Cu2+ on triboelectrically and naturally charged dielectric polymers

It has recently been reported that Teflon and polyethylene (PE) if rubbed by polymethylmethacrylate (PMMA) or Nylon as well as non-rubbed PMMA and Nylon induce "redox" reactions, including those of the reduction of Pd(+2) and Cu(+2) ions. On this basis, it was deduced that these dielectric materials may hold ?10(13)-10(14) of "hidden" electrons cm(-2), a value at least three orders of magnitude higher than the charge that a dielectric surface can accumulate without being discharged in air. The "hidden" electrons were termed "cryptoelectrons". In variance to these reports, we offer here an alternative interpretation. Our model is supported by X-ray photoelectron spectroscopy, contact angle and vibrating electrode (modified Kelvin probe) measurements performed on representative examples. Rubbing of the polymers was found to transfer polymer fragments between the rubbed surfaces altering their physical properties. The transferred polymer fragments promote adsorption of Cu(2+) and Pd(2+) ions. It was found that Teflon and PE rubbed with PMMA and Nylon, and non-rubbed PMMA and non-rubbed Nylon do not induce "redox" reactions of Cu(2+) and Pd(2+) ions but adsorb these ions on their surfaces. Furthermore, the earlier reported reduction of Pd(2+) to Pd(0) by electrons, as detected by catalytic activity of Pd(0) in a Cu-plating bath, can be alternatively explained by reduction of adsorbed Pd(2+) by the reducing agents of the bath itself. Based on these findings, we support the hypothesis that charging of dielectric polymers is due to ions or free radicals rather than electrons and there is no evidence to invoke a hypothesis of "cryptoelectrons".     

Indole-based chemosensor for Hg2+ and Cu2+ ions: applications in molecular switches and live cell imaging

An indole based "ratiometric" and "turn-off" tris(N-methylindolyl)methane based chemosensor depicting a contrasting fluorescent behavior towards Hg(2+) and Cu(2+) ions, exhibited NOR and YES logic functions, and also imaged intracellular Hg(2+) in cervix cancer (HeLa) cells.     

Ca2+ selectivity of the sarcoplasmic reticulum Ca2+-ATPase at the enzyme-water interface and in the Ca2+ entrance channel

The sarcoplasmic reticulum (SR) Ca(2+)-ATPase, a P-type transmembrane protein, can transport Ca(2+) from the cytoplasmic to the luminal side over other cations specifically. The proposed Ca(2+) entrance channel, composed of the main-chain carbonyl oxygen and side-chain carboxyl oxygen atoms of the amino acids, opens on the enzyme surface, just above the biphospholipid layer membrane-water interface, where Trp residues are frequently found. In this work, the physicochemical nature of Ca(2+) selectivity over Mg(2+) on the surface of the SR Ca(2+)-ATPase has been investigated using the density functional theory (DFT) method. The selection process can be regarded as the first step of the specificity of the enzyme to transport Ca(2+). Subsequently, the specificity of the entrance channel to conduct Ca(2+) over other cations has also been explored. As revealed by thermodynamic analyses, either the aromatic or the aliphatic amino acid residues distributed on the surface of Ca(2+)-ATPase have a bigger affinity to Mg(2+) than to Ca(2+), resulting in a concentration decrease of free Mg(2+) in the local region. Thus, Ca(2+) can transport into the Ca(2+)-entrance channel more easily. Whereafter, for a small quantity of Mg(2+) entering this channel accompanying the Ca(2+) current, the strong electrostatic interactions between Mg(2+) and the ligands will limit the activity of this metal ion, which facilitates the weakly bonded Ca(2+) passing through the channel at a relatively high rate, as suggested by the "sticky-pore" hypothesis. Furthermore, the corresponding theoretical investigations have demonstrated that the increase of the ligand electronegativity can enhance their discrimination between these two cations effectively.     

Designed self-assembly of molecular necklaces

This paper reports an efficient strategy to synthesize molecular necklaces, in which a number of small rings are threaded onto a large ring, utilizing the principles of self-assembly and coordination chemistry. Our strategy involves (1) threading a molecular "bead" with a short "string" to make a pseudorotaxane and then (2) linking the pseudorotaxanes with a metal complex with two cis labile ligands acting as an "angle connector" to form a cyclic product (molecular necklace). A 4- or 3-pyridylmethyl group is attached to each end of 1,4-diaminobutane or 1,5-diaminopentane to produce the short "strings" (C4N4(2+), C4N3(2+), C5N4(2+), and C5N3(2+)), which then react with a cucurbituril (CB) "bead" to form stable pseudorotaxanes (PR44(2+), PR43(2+), PR54(2+), and PR53(2+), respectively). The reaction of the pseudorotaxanes with Pt(en)(NO(3))(2) (en = ethylenediamine) produces a molecular necklace [4]MN, in which three molecular "beads" are threaded on a triangular framework, and/or a molecular necklace [5]MN, in which four molecular "beads" are threaded on a square framework. Under refluxing conditions, the reaction with PR44(2+) or PR54(2+) yields exclusively [4]MN (MN44T or MN54T, respectively), whereas that with PR43(2+) or PR53(2+) produces exclusively [5]MN (MN43S or MN53S, respectively). The products have been characterized by various methods including X-ray crystallography. At lower temperatures, on the other hand, the reaction with PR44(2+) or PR54(2+) affords both [4]MN and [5]MN. The supermolecules reported here are the first series of molecular necklaces obtained as thermodynamic products. The overall structures of the molecular necklaces are strongly influenced by the structures of pseudorotaxane building blocks, which is discussed in detail on the basis of the X-ray crystal structures. The temperature dependence of the product distribution observed in this self-assembly process is also discussed.     

B(14) (2+): A magic number double-ring cluster

B(20) is a "magic number" cluster with double-ring structure. Surprisingly, we also find that B(14) (2+) is a "magic number" cluster with double-ring structure, which has the largest HOMO-LUMO gap (3.31 eV) and the highest aromaticity in double-ring clusters. This double-ring B(14) (2+) cluster is energetically lower than the quasi-planar one by even ～1.2 eV using high level ab initio calculations. B(14) (2+) also has 40 valence electrons as in Al(13) (-) cluster. The reason leading to the unusual properties of B(14) (2+) may be the electronic shell closing as in Al(13) (-) cluster based on the jellium model, besides the double aromaticity in all double-ring clusters.     

Thiacalix[4]arene based reconfigurable molecular switches: set-reset memorized sequential device

The fluorescent chemosensors 3, 5 and 7 based on thiacalix[4]arene bearing naphthyl groups have been designed and synthesized. The optical chemosensor 3 based on a thiacalix[4]arene of cone conformation behaves as "turn-on" optical chemosensor for Fe(3+) and F(-) ions. However, chemosensors 5 and 7 based on a thiacalix[4]arene of 1,3-alternate conformation demonstrate "turn-on" optical behaviour for Hg(2+), F(-) ions (with receptor 5 as turn-on for K(+) ions also) and "turn-off" behaviour for Fe(3+) ions. The simultaneous presence of Fe(3+) and Hg(2+) or K(+) or F(-) ions results in formulation of reversible "on-off" switches. Various molecular logic gates developed in response to molecular switching between these chemical inputs have been integrated into sequential logic circuits with memory function in a feedback loop which mimics "set-reset" molecular level information processing device.     

A medium-controlled fluorescence dual-responsive probe for Cu2+ and Hg2+ in aqueous solutions

In this study, we report a histidine-based fluorescence probe for Cu(2+) and Hg(2+), in which the amino group and imino group were modified by two common protective groups, 9-fluorenylmethoxycarbonyl and trityl group, respectively. In a water/methanol mixed solution, the probe displayed a selective fluorescence "turn-off" response to Cu(2+) when the ratio of CH(3)OH/H(2)O was higher than 1:1. Specifically, when the solvent is changed to 1:1 methanol/water, the 304 nm fluorescence peak is enhanced, while the 317 nm peak is weakened, upon addition of either Cu(2+) or Hg(2+) ions. The mechanism for such distinct responses of the probe to Cu(2+) and Hg(2+) was further clarified by using NMR and molecular simulation. The experiment results indicated that the polarity of solvent could influence the coordination mode of 1 with Cu(2+) and Hg(2+), and control the fluorescence response as a "turn-off" or ratiometric probe.     

Sorption profile and chromatographic separation of uranium (VI) ions from aqueous solutions onto date pits solid sorbent

The retention profile of uranium (VI) as uranyl ions (UO(2)(2+)) from the aqueous media onto the solid sorbent date pits has been investigated. The sorption of UO(2)(2+) ions onto the date pits was achieved quantitatively (98+/-3.4%, n=5) after 15 min of shaking at pH 6-7. The sorption of UO(2)(2+) onto the used sorbent was found fast, followed by a first order rate equation with an overall rate constant, k of 4.8+/-0.05 s(-1). The sorption data were explained in a manner consistent with a "solvent extraction" mechanism. The sorption data were also subjected to Freundlich isotherm model over a wide range of equilibrium concentration (1-20 microgmL(-1)) of UO(2)(2+). The results revealed that, a "dual-mode" of sorption mechanism involving absorption related to "solvent extraction" and an added component for "surface adsorption" is most likely operated simultaneously for uranyl ions uptaking the solid sorbent. The thermodynamic parameters (-DeltaH, DeltaS and DeltaG) of the uranyl ions uptake onto the date pits indicated that, the process is endothermic and proceeds spontaneously. The interference of some diverse ions on the sorption UO(2)(2+) from the aqueous media onto the date pits packed column was critically investigated and the data revealed quantitative collection of UO(2)(2+) at 5 mLmin(-1) flow rate. The retained UO(2)(2+) was recovered quantitatively with HCl (3.0 molL(-1)) from the column at 5 mLmin(-1) flow rate. The mode of binding of the date pits with UO(2)(2+) was determined from the IR spectral date bits before and after extraction of uranium (VI). The height equivalent (HETP) and the number (N) of theoretical plates of the date pits packed column were determined from the chromatograms. Complete retention and recovery of UO(2)(2+) spiked to wastewater samples by the date pits packed column was successfully achieved. The capacity of the used sorbent towards retention of uranium (VI) from aqueous solutions was much better than the most common sorbents.     

A new "turn-on" chemodosimeter for Hg2+: ICT fluorophore formation via Hg(2+)-induced carbaldehyde recovery from 1,3-dithiane

A novel sensitive and specific Hg(2+) chemodosimeter, derived from 1',3'-dithiane-substituted 2,1,3-benzoxadiazole, displays "turn-on" fluorescent and colorimetric responses via an Hg(2+)-triggered aldehyde recovery reaction. Its potential to monitor Hg(2+) in living organisms has been demonstrated using zebrafish larvae.     

A "turn-on" electrochemiluminescent biosensor for detecting Hg2+ at femtomole level based on the intercalation of Ru(phen)3(2+) into ds-DNA

A well-designed oligonucleotide functionalized for Hg(2+) identification and Ru(phen)(3)(2+) intercalation is used to develop a "turn-on" electrochemiluminescent (ECL) biosensor for the determination of Hg(2+) in a drop (10 μL) of sample.