Nucleation, growth and morphology of Co thin films on Ag(1 1 0)

Scanning tunneling microscopy (STM) experiments reveal that Co growth on Ag(1 1 0), at coverages of Co < 1 ML and low substrate temperatures (150 K), involves a concomitant insertion of Co into the top Ag layer and exchange of Ag out onto the surface. At 300 K, coverages of Co > 1 ML gives rise to a 3D nanocluster growth on the surface, with the clusters covered by Ag. Depending slightly on coverage, the clusters have a typical diameter of 3 nm and a height of 0.4 nm. Upon annealing to 500 K, major changes are observed in the morphology of the surface. STM and AES show that there is a reduction of the number of Co islands on the surface, partly due to subsurface Co cluster migration and partly due to sintering into larger clusters.     

The electrodeposition of copper onto UHV-prepared GaAs(0 0 1) surfaces

Synchrotron surface X-ray diffraction has been used to investigate in situ the morphology and epitaxy of monolayer amounts of copper electrodeposited from aqueous electrolyte onto ultra-high vacuum prepared, smooth, Ga- or As-terminated GaAs(0 0 1) surfaces. The fcc lattice of the epitaxial Cu islands is rotated by 5° and tilted by about 9° with respect to the GaAs substrate lattice, leading to eight symmetry equivalent domains of Cu islands terminated by {1 1 1} facets.     

Energetics of dopant atoms in subsurface positions of diamond semiconductor

We present a set of ab initio energetics for a substitutional boron (B) impurity atom in subsurface positions, from the topmost to the fifth atomic layer, of both C(001)-2×1:H and C(111)-1×1:H. We compare the calculated surface-B binding energies with those obtained for P [T. Miyazaki, H. Kato, H. Okushi, S. Yamasaki, e-J. Surf. Sci. Nanotech. 4 (2006) 124]. The surface-P binding energies become larger as the position of P is closer to the two surfaces. They are up to 4 eV for C(001)-2×1:H and 2.6 eV for C(111)-1×1:H, respectively. For B, in contrast, the binding energies are within 0.5 eV for both surfaces. An implication of our finding in the context of a mechanism for P and B doping in diamond is discussed.     

Microwave dielectric properties of (1 − x)(Mg0.95Co0.05)TiO3–x(Na0.5La0.5)TiO3 ceramic system

The microstructures and the microwave dielectric properties of the (1 − x)(Mg_0.95Co_0.05)TiO₃–x(Na_0.5La_0.5)TiO₃ ceramic system were investigated. Two-phase system was confirmed by the XRD patterns and the EDX analysis. A co-existed second phase (Mg_0.95Co_0.05)Ti₂O₅ was also detected. The microwave dielectric properties are strongly related to the density and the matrix of the specimen. A new microwave dielectric material 0.88(Mg_0.95Co_0.05)TiO₃–0.12(Na_0.5La_0.5)TiO₃, possessing an excellent combination of dielectric properties: ε_r  22.36, Q × f  110,000 GHz (at 9 GHz), τ_f  2.9 ppm/°C), is proposed as a candidate dielectric for GPS patch antennas.     

Dimensional evolution of silicon nanowires synthesized by Au–Si island-catalyzed chemical vapor deposition

This study explores the nucleation and morphological evolution of silicon nanowires (Si-NWs) on Si (0 0 1) and (1 1 1) substrates synthesized using nanoscale Au–Si island-catalyzed rapid thermal chemical vapor deposition. The Au–Si islands are formed by Au thin film (1.2–3.0 nm) deposition at room temperature followed by annealing at 700 °C, which are employed as a liquid-droplet catalysis during the growth of the Si-NWs. The Si-NWs are grown by exposing the substrates with Au–Si islands to a mixture of gasses SiH₄ and H₂. The growth temperatures and the pressures are 500–600 °C and 0.1–1.0 Torr, respectively. We found a critical thickness of the Au film for Si-NWs nucleation at a given growth condition. Also, we observed that the dimensional evolution of the NWs significantly depends on the growth pressure and temperature. The resulting NWs are 30–100 nm in diameter and 0.4–12.0 μm in length. For Si (0 0 1) substrates 80% of the NWs are aligned along the 1 1 1 direction which are 30° and 60° with respect to the substrate surface while for Si (1 1 1) most of the NWs are aligned vertically along the 1 1 1 direction. In particular, we observed that there appears to be two types of NWs; one with a straight and another with a tapered shape. The morphological and dimensional evolution of the Si-NWs is significantly related to atomic diffusion kinetics and energetics in the vapor–liquid–solid processes.     

Scanning tunneling microscopy/spectroscopy on multi-layered cuprate superconductor Ba2Ca5Cu6O12 (O1−x Fx)2

Scanning tunneling microscopy/spectroscopy (STM/STS) measurements on multi-layered cuprate superconductor Ba₂Ca₅Cu₆O₁₂ (O_1−x F_x)₂ are carried out. STM topographies show randomly distributed bright spot structures with a typical spot size of 0.8 nm. These bright spots are occupied about 28% per one unit cell of c-plane, which is comparable to the regular amount of apical oxygen of 20% obtained from element analysis. Tunneling spectra simultaneously show both the small and the large gap structures. These gap sizes at 4.9 K are about Δ 15 meV and 90 meV, respectively. The small gap structure disappears at the temperature close to T_C, while the large gap persists up to 200 K. Therefore, these features correspond to the superconducting gap and pseudogap, respectively. These facts give evidence for some ordered state with large energy scale even in the superconducting state. For the superconducting gap, the ratio of 2Δ/K_BT_C = 4.9 is obtained with T_C = 70 K, which is determined from temperature dependence of the tunneling spectra.     

Structure and properties of the one-dimensional cobalt oxide CaCo2O4

We have studied crystal structure and transport properties of the quasi one-dimensional cobalt oxide CaCo₂O₄. The CaCo₂O₄ phase crystallizes in calcium-ferrite type structure, which consists of a corner- and edge-shared CoO₆ octahedron network including one-dimensional double chains. Large thermoelectric power (S  150 μV/K at 390 K) with metallic temperature dependence of S, moderate resistivity (ρ  2.9 × 10⁻¹ Ω cm at 390 K) with carrier localization at low temperature, and normal thermal conductivity (κ  6.3 W/Km at 390 K) were observed. The phonon mean-free path was calculated from the observed data, as a function of temperature. The long phonon mean-free path (l  24 Å at 300 K) implies that the thermal conductivity could be suppressed by impurity scattering of phonons with partial element substitution.     

Structure and reaction pathways of methyl lactate on Pd(1 1 1)

The adsorption and reaction of methyl lactate (CH₃CH(OH)COOCH₃) is studied in ultrahigh vacuum on a Pd(1 1 1) surface using temperature-programmed desorption (TPD) and reflection–absorption infrared spectroscopy (RAIRS). Methyl lactate reacts at relatively low temperatures (220 K) by O–H bond scission. This intermediate can either react with hydrogen to reform methyl lactate at 280–300 K or undergo β-hydride elimination to form flat-lying methyl pyruvate. This decomposes to form acetyl and methoxy carbonyl species as found previously following methyl pyruvate adsorption on Pd(1 1 1). These species predominantly react to form carbon monoxide, methane and hydrogen.     

Compact 120 TW Ti:sapphire laser system with a high gain final amplifier

A 120 TW/36 fs laser system based on Ti:sapphire chirped-pulse amplification (CPA) has been successfully established in our lab. The final four pass Ti:sapphire amplifier pumped by an energetic single-shot Nd:YAG—Nd:glass laser was designed and optimized. With 24 J/8 ns pump energy at 532 nm, 300 mJ/220 ps chirped pulse was amplified to 5.98 J in this amplifier, and a total saturated gain of 20 was achieved. The focused intensity of compressed beam could reach to 10²⁰ W/cm² with the M² of 2.0.     

Tetra-σ bonding adsorption of pyridine on Si(1 0 0)-2 × 1

We studied adsorption of pyridine on Si(1 0 0) at room temperature using high resolution photoemission spectroscopy (PES) and near edge X-ray adsorption fine structure (NEXAFS) in the partial electron yield (PEY) mode. The Si 2p, C 1s, N 1s spectra of pyridine on Si(1 0 0) showed that pyridine is chemisorbed on Si(1 0 0)-2 × 1 through the formation of the tetra-σ-bonded structure with the N atom and three C atoms. NEXAFS was conducted to characterize the adsorption geometry of pyridine on Si(1 0 0). The π* orbital of CC bond showed a good angle dependence in C K-edge NEXAFS spectra, and we were able to estimate the adsorption angle between chemisorbed pyridine of CC bond and the Si(1 0 0) surface using an analytical solution of NEXAFS intensity. We find the coexistence of two different tight bridges with the adsorption angles 42 ± 2° and 45 ± 2° with almost equal abundance.     

Time-of-flight distributions of HD molecules abstracted at a Si(1 0 0) surface

We study the dynamics of D abstraction by 0.05 eV H atoms on a Si(1 0 0) surface. Time-of-flight (TOF) distributions of the abstracted HD molecules are measured using a quasi-random chopper/cross-correlation method. The measured TOF distribution is found to be broad and fast. The distribution is decomposed into two components being related to direct abstraction (ABS) and adsorption-induced-desorption (AID), which were revealed in the kinetics studies. The best curve fits yield mean kinetic energies of 1.15 ± 0.20 eV and 0.33 ± 0.05 eV for the ABS and AID components, respectively. Dynamics and kinetics of hydrogen abstraction at Si(1 0 0) surfaces are consistently understood.     

Initial nucleation of Au on the R45° reconstructed Fe3O4(0 0 1) surface

The initial nucleation of Au onto the R45° reconstructed Fe₃O₄(0 0 1) surface has been studied using scanning tunnelling microscopy. Au clusters are formed, with a typical lateral dimension of 0.9 nm. The measured corrugation height of the clusters, 0.1 nm, suggests that they are a single atomic layer in height. The clusters nucleate on a specific surface site, which lies at the centre of a R45° reconstructed unit cell. The size and spatial distribution of the Au clusters formed is shown to strongly correlate to the symmetry and periodicity of the reconstructed magnetite surface. It is also shown that even when the clusters are in close proximity they still only occupy this single nucleation site, and thus maintain the periodicity of the substrate. We relate the order and stability of this system to the fact that magnetite (0 0 1) is polar, and suggest that such surfaces offer ideal templates for self-assembly due to the stability of their polarity induced reconstructions.     

Formate stability and carbonate hydrogenation on strained Cu overlayers on Pt(1 1 1)

Formate (HCOO) synthesis, decomposition and the hydrogenation of carbonate (CO₃) on Cu overlayers deposited on a Pt(1 1 1) single crystal are investigated to examine the reactivity of a Cu surface under tensile strain with defects present.Formate is synthesized from a 0.5 bar mixture of 70% CO₂ and 30% H₂ at varying temperatures, and the evolution is followed with polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS). Subsequent TPD reveals decomposition of the formate species into CO₂ and H₂ at 420 ± 5 K for strained Cu at sub-monolayer to monolayer coverages. This is a significantly lower decomposition temperature than obtained earlier on pristine Cu(1 1 1) (460 K), as well as for thicker Cu layers where we assign an observed decomposition peak at 440 ± 5 K to relaxed, but defect-rich Cu(1 1 1). However, the thermal stability of formate on strained and defect-rich Cu is similar to previous results obtained for supported, and lattice-strained, Cu nanoparticles.The hydrogenation of carbonate produced by 0.3 bar CO₂ exposure at room temperature was monitored with XPS and TPD showing a significant loss of carbonate when subjected to 0.2 bar H₂ at room temperature. However, the presence of formate on the surface, or any other hydrogenation product, could not be established during or after H₂ exposure by PM-IRRAS, EELS or TPD. Even so, the results suggest that carbonate and its hydrogenation may constitute a relevant pathway to methanol production.     

Frequency-stabilized seed laser system for dial applications around 0.94 μm

Absolute frequency stabilization of an extended-cavity diode laser at 0.94 μm is reported. The diode laser was frequency locked against rovibrational absorption lines of water vapour by using the frequency modulation spectroscopy technique. The stabilized oscillator shows a short-term frequency stability level of 40 kHz for integration times of 1 s and a long-term frequency drift lower than 10 MHz for observation times longer than 10³ s. The frequency-stabilized oscillator system is mounted on a compact breadboard (75 cm×50 cm) and constitutes the seed laser system for the injection of a high-energy DIAL laser transmitter operating in the 0.94-μm spectral region.     

Adsorption of an organic zwitterion on a Si(1 1 1)-7 × 7 surface at room temperature

The couple sulfonato/Si(1 1 1)-7 × 7 leads to remarkable 2D chiral molecular assembly with a stability improved at room temperature. The voltage-dependency of the STM images has been experimentally investigated and the correlation between STM images and PDOS has been studied. The proposed empirical model of the adsorption of molecules on Si(1 1 1)-7 × 7 has been justified by the experimental and theoretical data.     

Hybrid system of iron porphyrin on aminosilanized c-Si

Adsorption of iron porphyrin (Fe^IIITPPS₄) Fe(III)meso-tetra(4-sulfonatophenyl) porphine on aminosilanized surface of crystalline Si (c-Si) was investigated. Formation of nanometric structures of Fe^IIITPPS₄ on c-Si, the surface of which has been modified by various silanization procedures, was studied. Aqueous, ethanol and acetone solutions of 3-aminopropyltrietoxysilane (APTES) were prepared for deposition on c-Si by spinning or immersion techniques. Smooth homogeneous APTES films of thickness 100–500 nm were produced by multiple spin coating procedure. Thin APTES films of thickness 2.5 nm were fabricated by dipping technique followed by washing procedure. Hybrid system of Fe^IIITPPS₄/APTES/Si was prepared from a drop of Fe^IIITPPS₄ aqueous solution put on aminosilanized Si surface or by dipping the Si wafer in Fe^IIITPPS₄ aqueous solution. Nanostructures of size 50–250 nm were formed along with large rings of Ø50–100 μm which have been observed at chemisorption of highly concentrated (1 mM) Fe^IIITPPS₄ aqueous solution. Spectroscopic ellipsometry was used to characterize the APTES layer and to investigate the aggregation state of Fe^IIITPPS₄. The studies provided allowed one to presume that covalent bonds were formed between amino-groups of APTES and functional groups of sulfonic acid in porphyrin leading to immobilization of Fe^IIITPPS₄ on Si substrate.     

Photonic generation of microwave signal using a dual-wavelength single-longitudinal-mode distributed Bragg reflector fiber laser

In this paper, a novel all-optical microwave generation technique based on a dual-wavelength single-longitudinal-mode (SLM) distributed Bragg reflector (DBR) fiber laser is proposed and demonstrated. By exploiting spatial hole burning (SHB) effect, this laser could provide stable dual-wavelength SLM operation with a wavelength separation of 0.088 nm corresponding to the microwave signal at 10.484 GHz with a 3 dB bandwidth of 28 kHz. By appropriately adjusting the pump power, dual-wavelength oscillation could be maintained at different temperatures. We have theoretically analyzed the mechanism for microwave generation of the proposed DBR laser, and the calculated microwave frequency is in good agreement with our experimental results. Furthermore, experimental observation shows both of the laser wavelengths and generated microwave signals have good stability at room temperature.     

Neutron polarization analysis on the multiferroic TbMn2O5

Polycrystalline TbMn₂O₅ was prepared by the standard solid-state reaction method and characterized by powder X-ray diffraction and magnetization to assure it is of single phase. Heat capacity measurements on the compound reveal an antiferromagnetic phase transition at 45 K. A broad peak below 6 K in the heat capacity measurements corresponds to the crossover transition of Tb³⁺ ordering. To confirm these magnetic orderings, neutron powder diffractions on TbMn₂O₅ with XYZ neutron polarization analysis were performed at the diffuse neutron scattering (DNS) spectrometer, FRJ-II, by using neutron wavelength of 4.8 Å in the temperature range of 1.8–250 K. Magnetic scattering was separated from nuclear coherent and spin incoherent scattering contributions. Long-range ordered magnetic peaks were observed below 39 K which is consistent with the heat capacity results. The drastic increasing intensities below 6 K indicate the ferromagnetic transition in Tb³⁺ orderings.     

A simple scanning semiconductor diode laser source and its application in wavelength modulation spectroscopy around 825 nm

A very simple and inexpensive tunable semiconductor diode laser controller is designed for stable operation of the diode laser. The diode laser controller is stable within +/−8 μA and +/−10 mK, respectively. The noise spectrum of the current controller is studied by FFT analysis. We have used our home-made diode laser system in a tunable diode laser absorption spectrometer (TDLAS) to probe weak overtone transitions of water vapour molecule. The diode laser wavelength is coarsely tuned by changing the operating temperature to probe (2, 1, 1)←(0, 0, 0) band overtone transitions of water vapour within 818–835 nm. To demonstrate line shape study, seven transitions are scanned by ramping the drive current of the diode laser (at constant operating temperature) under different perturber (laboratory air) pressures within the sample cell. A balanced detector and a lock-in amplifier are used for phase sensitive detection purpose. Small current modulation amplitude, balanced detection and proper adjustment of the lock-in amplifier help to obtain a S/N ratio ranging from 100 to 7 using a small sample path length of 1.5 m. Experimentally obtained derivative spectrum is numerically integrated to reveal the original line shape and fitted with a nonlinear least squares fitting program to extract air broadening coefficients and line strength parameters. The spectroscopic line parameters are compared with the results from HITRAN database.     

Quantum confinement and interface structure of Si nanocrystals of sizes 3–5 nm embedded in a-SiO2

Spectroscopic ellipsometry and Monte Carlo simulations are employed to answer the fundamental question whether the energy gaps of Si nanocrystals with sizes in the range of 3–5 nm, which are embedded in amorphous silica, follow or deviate from the quantum confinement model, and to examine their interfacial structure. It is shown that the optical properties of these nanocrystals are well described by the Forouhi–Bloomer interband model. Analysis of the optical measurements over a photon-energy range of 1.5–5 eV shows that the gap of embedded nanocrystals with a mean size of 3.9 nm follows closely quantum confinement theory. A large band gap expansion (0.65 eV) compared to bulk Si is observed. The Monte Carlo simulations reveal a non-abrupt interface and a large fraction of interface oxygen bonds. This, in conjunction with the experimental observations, indicates that oxygen states and the chemical disorder at the interface have a negligible influence on the optical properties of the material in this size regime.