Spectroscopic and thermal characterization of the host–guest interactions between α‐, β‐ and γ‐cyclodextrins and vanadocene dichloride

Host–guest interactions between α‐, β‐ and γ‐cyclodextrins and vanadocene dichloride (Cp₂VCl₂) have been investigated by a combination of thermogravimetric analysis, differential scanning calorimetry, powder X‐ray diffraction and solid‐state and solution electron paramagnetic resonance (EPR) spectroscopy. The solid‐state results demonstrated that only β‐ and γ‐cyclodextrins form 1:1 inclusion complexes, while α‐cyclodextrin does not form an inclusion complex with Cp₂VCl₂. The β‐ and γ‐CD–Cp₂VCl₂ inclusion complexes exhibited anisotropic electron‐⁵¹V (I = 7/2) hyperfine coupling constants whereas the α‐CD–Cp₂VCl₂ system showed only an asymmetric peak with no anisotropic hyperfine constant. On the other hand, solution EPR spectroscopy showed that α‐cyclodextrin (α‐CD) may be involved in weak host–guest interactions in equilibrium with free vanadocene species. Copyright © 2008 John Wiley & Sons, Ltd.     

Spectrophotometric Study of the Interaction of β‐Cyclodextrin with Hydroxamic acids

Cyclodextrins have attracted considerable interest because of their ability to form stable inclusion complexes with a wide variety of inorganic and organic guest molecules. In the present communication, binding constant of β‐cyclodextrin and a series of substituted benzohydroxamic acids (X‐C₆H₄CON(OH)H), X=H, 4‐NO₂, 4‐Me 4‐OMe, and 2‐OH and N‐phenylbenzohydroxamic acid (C₆H₅CON(OH)C₆H₅) were determined at 27°C spectrophotometrically. In all the cases the formation of 1:1 host‐guest complex was established. The addition of β‐CD results in an increase in the absorbance intensity but does not cause a shift in λ_max. The values of binding constants are in good agreement with in those determined from kinetic and pH metric techniques.     

Mechanism of Host–Guest Complex Formation and Identification of Intermediates through NMR Titration and Diffusion NMR Spectroscopy

The formation of host–guest (H‐G) complexes between 1,8‐bis[(diethylgallanyl)ethynyl]anthracene (H) and the N‐heterocycles pyridine and pyrimidine (G) was studied in solution using a combination of NMR titration and diffusion NMR experiments. For the latter, diffusion coefficients of potential host–guest structures in solution were compared with those of tailor‐made reference compounds of similar shape (synthesized and characterized by NMR, HRMS, and in part XRD). Highly dynamic behavior was observed in both cases, but with different host–guest species and equilibria. With increasing concentrations of the pyridine guest, the equilibrium H₂?H₂κ¹‐G₁?HG₂ is observed (in the second step a host dimer coordinates one guest molecule); for pyrimidine the equilibrium H₂→H₁κ²‐G₁?HG₂ is observed (the formation of a 1:1 aggregate is the second step).     

Effects of solvent,casting temperature,and guest/host stoichiometries on the properties of shape memory material based on partial α‐CD‐PEG inclusion complex

A series of supramolecular inclusion complex (IC) films were formed by threading α‐cyclodextrin (α‐CD) molecules over poly(ethylene glycol) (PEG), according to the designed ratio of α‐CD/PEG. Because of containing α‐CD‐PEG inclusion crystallites as physical crosslinks and uncovered PEG crystallites as “switch phase”, the resulting supramolecular α‐CD‐PEG partial ICs displayed a shape memory effect. The properties of the materials were investigated by ¹H‐NMR, X‐ray diffraction (XRD), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and swelling measurement. It was found that the casting temperature, solvent, and the ratio of α‐CD‐PEG inclusion/PEG had great influence on the formation and properties of α‐CD‐PEG partial ICs. The modes of complexes on different conditions were proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 951–957, 2010     

Morphological change of poly (ε‐caprolactone) with a wide range of molecular weight via formation of inclusion complex with α‐cyclodextrin

The effect of molecular weight of poly(ε‐caprolactone) (PCL) on the formation and stability of inclusion complexes (ICs) between α‐cyclodextrin (α‐CD) and PCL was investigated by FTIR, WAXD, and DSC measurements. ICs between α‐CD and PCLs with a wide range of number‐average molecular weight, M_n = 1.21 × 10⁴ – 1.79 × 10⁵, were prepared by mixing the aqueous solution of CD and acetone solution of PCL followed by stirring at 60 °C for 1h and at the room temperature for 1 day. FTIR, WAXD, and DSC measurement showed the PCL chains were included into the α‐CD cavity, and the crystallization of PCL was suppressed in the α‐CD cavity. Stoichiometry and yield of each IC varied with the molecular weight of guest PCL, and the effect of IC formation on the crystallization behaviour of guest polymer decreased with the increase of molecular weight of guest polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1433–1440, 2005     

A mixed cyclodextrin‐biphenyl thermotropic liquid crystal: Synthesis,liquid‐crystalline properties,and supramolecular organization

A well‐defined structure liquid crystal heptakis [6‐deoxy‐6‐(1‐H‐1,2,3‐triazol‐4‐yl)(methyl)6‐(4‐methoxybiphenyl‐4′‐yloxy) hexanoyl]‐β‐cyclodextrin (H6B‐β‐CD) was synthesized from propargyl 6‐(4‐methoxybiphenyl‐4′‐yloxy) hexanoate (P6B) and heptakis (6‐deoxy‐6‐azido)‐β‐cyclodextrin ((N₃)₇‐β‐CD) by click reaction. The chemical structure of H6B‐β‐CD was confirmed by ¹H NMR, FTIR, and MALDI‐TOF MS. The thermal stability of the compound was investigated by thermogravimetric analysis (TGA). The liquid crystalline behavior was studied by differential scanning calorimetry (DSC), polarizing optical microcopy (POM), and wide‐angle X‐ray diffraction (WAXD) measurement. These investigations have shown that the supramolecular structure of H6B‐β‐CD are consisted of a large scale ordered lamellar structure and a small scale ordered structure (SmE) at low temperature region. As the temperature increases, the small scale structure becomes disordered relatively in the first instance, from smectic E to smectic A. Then, the lamellar structure collapses and nematic phase and isotropic phase are observed in sequence. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2838–2845, 2010     

Morphology and dynamics of the poly(ϵ‐caprolactone)‐b‐poly(L‐lactide) diblock copolymer and its inclusion compound with α‐cyclodextrin: A solid‐state 13C NMR study

A biodegradable diblock copolymer of poly(ϵ‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA) was synthesized and characterized. The inclusion compound (IC) of this copolymer with α‐cyclodextrin (α‐CD) was formed and characterized. Wide‐angle X‐ray diffraction showed that in the IC crystals α‐CDs were packed in the channel mode, which isolated and restricted the individual guest copolymer chains to highly extended conformation. Solid‐state ¹³C NMR techniques were used to investigate the morphology and dynamics of both the bulk and α‐CD‐IC isolated PCL‐b‐PLLA chains. The conformation of the PCL blocks isolated within the α‐CD cavities was similar to the crystalline conformation of PCL blocks in the bulk copolymer. Spin–lattice relaxation time (T₁C) measurements revealed a dramatic difference in the mobilities of the semicrystalline bulk copolymer chains and those isolated in the α‐CD‐IC channels. Carbon‐observed proton spin–lattice relaxation in the rotating frame measurements (T_1ρH) showed that the bulk copolymer was phase‐separated, while, in the IC, exchange of proton magnetization through spin‐diffusion between the isolated guest polymer chains and the host α‐CD was not complete. The two‐dimensional solid‐state heteronuclear correlation (HetCor) method was also employed to monitor proton communication in these samples. Intrablock exchange of proton magnetization was observed in both the bulk semicrystalline and IC copolymer samples at short mixing times; however, even at the longest mixing time, interblock proton communication was not observed in either sample. In spite of the physical closeness between the isolated included guest chains and the host α‐CD molecules, efficient proton spin diffusion was not observed between them in the IC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2086–2096, 2005     

A Study of the Interaction Between Cucurbit[8]uril and Alkyl‐Substituted 4‐Pyrrolidinopyridinium Salts

The interaction between cucuribit[8]uril (Q[8]) and a series of 4‐pyrrolidinopyridinium salts bearing aliphatic substituents at the pyridinium nitrogen, namely 4‐(C₄H₈N)C₅H₅NRBr, where R=Et (g1), n‐butyl (g2), n‐pentyl (g3), n‐hexyl (g4), n‐octyl (g5), n‐dodecyl (g6), has been studied in aqueous solution by ¹H NMR spectroscopy, electronic absorption spectroscopy, isothermal titration calorimetry and mass spectrometry. Single crystal X‐ray diffraction revealed the structure of the host–guest complexes for g1, g2, g3, and g5. In each case, the Q[8] contains two guest molecules in a centrosymmetric dimer. The orientation of the guest molecule changes as the alkyl chain increases in length. Interestingly, in the solid state, the inclusion complexes identified are different from those observed in solution, and furthermore, in the case of g3, Q[8] exhibits two different interactions with the guest. In solution, the length of the alkyl chain plays a significant role in determining the type of host–guest interaction present.     

Supramolecular inclusion complexes of star‐shaped poly(ε‐caprolactone) with α‐cyclodextrin

Both star‐shaped poly(ε‐caprolactone) (PCL) having 4 arms (4sPCL) and 6 arms (6sPCL) and linear PCL having 1 arm (LPCL) and 2 arms (2LPCL) were synthesized and then investigated for inclusion complexation with α‐cyclodextrin (α‐CD). The supramolecular inclusion complexes (ICs) were in detail characterized by ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X‐ray diffraction, solid‐state carbon nuclear magnetic resonance spectroscopy using cross‐polarization and magic‐angle spinning, and Fourier transform infrared, respectively. The stoichiometry (CL:CD, mol:mol) of all ICs increased with the increasing branch arm of PCL polymers, and it was in the order of α‐CD‐6sPCL1 ICs > α‐CD‐4sPCL ICs > α‐CD‐2LPCL ICs > α‐CD‐LPCL ICs. All analyses indicated that the branch arms of star‐shaped PCL polymers were included into the hydrophobic α‐CD cavities and their original crystalline properties were completely suppressed. Moreover, the ICs of star‐shaped PCL with α‐CD had a channel‐type crystalline structure similar to that formed between the linear PCL and α‐CD. Furthermore, the thermal stability of the free PCL polymers probably controlled that of the guest polymers included in the ICs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4721–4730, 2005     

Partial miscibility in a nylon‐6/nylon‐66 blend coalesced from their common α‐cyclodextrin inclusion complex

We successfully formed a series of inclusion complexes (ICs) between an α‐cyclodextrin (α‐CD) host and two kinds of guest polymers, nylon‐6 and nylon‐66. An attempt to achieve an intimate blend between nylon‐6 and nylon‐66 through the formation and dissociation of their common α‐CD IC was made. The formation of all nylon ICs was verified with wide‐angle X‐ray diffraction, differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) and cross‐polarized/magic‐angle‐spinning ¹³C NMR spectroscopy. The experimental results demonstrated that α‐CD could only host single nylon polymer chains in the IC channels, either nylon‐6 or nylon‐66 in their own complexes, and presumably either nylon in neighboring channels of their common IC. The IC‐coalesced blend of nylon‐6 and nylon‐66 was obtained after the removal of the host cyclodextrin from their common IC with dimethyl sulfoxide. The spectroscopic results (FTIR and ¹³C NMR) illustrated that there was a degree of intimate miscibility existing in the IC‐coalesced blend, but not in the solution‐cast physical blend, although X‐ray diffraction patterns showed that the crystal structure of the IC‐coalesced blend was similar to that of the physical blend. DSC thermal profiles suggested that nylon‐66 first formed crystals during coalescence and that the subsequent crystallization of nylon‐6 was greatly affected by the nylon‐66 crystallites because of the close proximity of the two components in portions of the coalesced blend. DSC observations also demonstrated that the melting of the coalesced blend did not lead to complete phase separation of the nylon‐6 and nylon‐66 components. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1369–1378, 2004     

α‐keto‐β‐diimine nickel‐catalyzed olefin polymerization: Effect of ortho‐aryl substituents and preparation of stereoblock copolymers

A series of α‐keto‐β‐diimine nickel complexes (Ar‐N = C(CH₃)‐C(O)‐C(CH₃)=N‐Ar)NiBr₂; Ar = 2,6‐R‐C₆H₃‐, R = Me, Et, iPr, and Ar = 2,4,6‐Me₃‐C₆H₃‐) was prepared. All corresponding ligands are unstable even under an inert atmosphere and in a freezer. Stable copper complex intermediates of ligand synthesis and ethyl substituted nickel complex were isolated and characterized by X‐ray. All nickel complexes were used for the polymerization of ethene, propylene, and hex‐1‐ene to investigate their livingness and the extent of chain‐walking. Low‐temperature propene polymerization with less bulky ortho‐substituents was less isospecific than the one with isopropyl derivative. Propene stereoblock copolymers were prepared by iPr derivative combining the polymerization at low temperature to prepare isotactic polypropylene (PP) block and at a higher temperature, supporting chain‐walking, to obtain amorphous regioirregular PP block. Alternatively, a copolymerization of propene with ethene was used for the preparation of amorphous block. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2440–2449     

Veronicafolin－β-环糊精的物化表征及Veronicafolin－羟丙基-β-环糊精包合物溶解性的增强

用氢谱、红外光谱、X-射线粉末衍射、热分析、元素分析等测试方法研究了Veronicafolin (3,5,4′-三羟基-6,7,3′-三甲氧基黄酮) 和β-环糊精 (β-CD) 的固体包合物的谱学特征。元素分析结果显示形成Veronicafolin-β-CD·20H2O包合物，其中C：39.58%, H: 5.75%，表明包合物中主客体比为1∶1。该包合类型属于A_L-型。通过紫外-可见分光光度法研究了在羟丙基-β-环糊精（HP-β-CD）的存在下Veronicafolin的相溶解度曲线，测得校正曲线为y = 24148x + 0.0075 (r=0.9999)，相溶解曲线为y=0.4738x-2.0×10^-7 (r=0.9490)，包结平衡常数Ks为4.5×10⁶mol-1。HP-β-CD提高了黄酮醇Veronicafolin的溶解度。     

Construction of Chemical‐Responsive Supramolecular Hydrogels from Guest‐Modified Cyclodextrins

A methodology for preparing supramolecular hydrogels from guest‐modified cyclodextrins (CDs) based on the host–guest and hydrogen‐bonding interactions of CDs is presented. Four types of modified CDs were synthesized to understand better the gelation mechanism. The 2D ROESY NMR spectrum of β‐CD‐AmTNB (Am=amino, TNB=trinitrobenzene) reveals that the TNB group was included in the β‐CD cavity. Pulsed field gradient NMR (PFG NMR) spectroscopy and AFM show that β‐CD‐AmTNB formed a supramolecular polymer in aqueous solution through head‐to‐tail stacking. Although β‐CD‐AmTNB did not produce a hydrogel due to insufficient growth of supramolecular polymers, β‐CD‐CiAmTNB (Ci=cinnamoyl) formed supramolecular fibrils through host–guest interactions. Hydrogen bonds between the cross‐linked fibrils resulted in the hydrogel, which displayed excellent chemical‐responsive properties. Gel‐to‐sol transitions occurred by adding 1‐adamantane carboxylic acid (AdCA) or urea. ¹H NMR and induced circular dichroism (ICD) spectra reveal that AdCA released the guest parts from the CD cavity and that urea acts as a denaturing agent to break the hydrogen bonds between CDs. The hydrogel was also destroyed by adding β‐CD, which acts as the competitive host to reduce the fibrils. Furthermore, the gel changed to a sol by adding methyl orange (MO) as a guest compound, but the gel reappeared upon addition of α‐CD, which is a stronger host for MO.     

A Rapidly Self‐Healing Supramolecular Polymer Hydrogel with Photostimulated Room‐Temperature Phosphorescence Responsiveness

Development of self‐healing and photostimulated luminescent supramolecular polymeric materials is important for artificial soft materials. A supramolecular polymeric hydrogel is reported based on the host–guest recognition between a β‐cyclodextrin (β‐CD) host polymer (poly‐β‐CD) and an α‐bromonaphthalene (α‐BrNp) polymer (poly‐BrNp) without any additional gelator, which can self‐heal within only about one minute under ambient atmosphere without any additive. This supramolecular polymer system can be excited to engender room‐temperature phosphorescence (RTP) signals based on the fact that the inclusion of β‐CD macrocycle with α‐BrNp moiety is able to induce RTP emission (CD‐RTP). The RTP signal can be adjusted reversibly by competitive complexation of β‐CD with azobenzene moiety under specific irradiation by introducing another azobenzene guest polymer (poly‐Azo).     

Hoop‐Shaped Condensed Aromatic Systems: Synthesis and Structure of Iron– and Ruthenium–Hepta(organo)[60]fullerene Complexes

Potassium reduction of iron– and ruthenium–penta(organo)[60]fullerene complexes, [M(η⁵‐C₆₀R₅)(η⁵‐Cp)] ( 1 a : M=Fe, R=Ph; 1 b : M=Fe, R=Me; 1 c : M=Ru, R=Ph; 1 d : M=Ru, R=Me; Cp=C₅H₅) gave mono‐ and dianions of these complexes. Treatment of the dianion 1 a with α‐bromodiphenylmethane gave three different iron–hepta(organo)[60]fullerenes, [Fe{η⁵‐C₆₀Ph₅(CHPh₂)₂}(η⁵‐Cp)], as a mixture of regioisomers. All three compounds were fully characterized by physical methods, including X‐ray crystallography and electrochemical measurements. One of the three compounds contains a new hoop‐shaped condensed aromatic system.     

Semiconducting Clathrates Meet Gas Hydrates: Xe24[Sn136]

Semiconducting Group 14 clathrates are inorganic host–guest materials with a close structural relationship to gas hydrates. Here we utilize this inherent structural relationship to derive a new class of porous semiconductor materials: noble gas filled Group 14 clathrates (Ng_x[M₁₃₆], Ng=Ar, Kr, Xe and M=Si, Ge, Sn). We have carried out high‐level quantum chemical studies using periodic Local‐MP2 (LMP2) and dispersion‐corrected density functional methods (DFT‐B3LYP‐D3) to properly describe the dispersive host–guest interactions. The adsorption of noble gas atoms within clathrate‐II framework turned out to be energetically clearly favorable for several host–guest systems. For the energetically most favorable noble gas filled clathrate, Xe₂₄[Sn₁₃₆], the adsorption energy is ?52 kJ mol^?1 per guest atom at the LMP2/TZVPP level of theory, corresponding to ?9.2 kJ mol^?1 per framework Sn atom. Considering that a hypothetical guest‐free Sn clathrate‐II host framework is only 2.6 kJ mol^?1 per Sn atom less stable than diamond‐like α‐Sn, the stabilization resulting from the noble gas adsorption is very significant.     

Restricted Conformational Flexibility of a Triphenylamine Derivative on the Formation of Host–Guest Complexes with Various Macrocyclic Hosts

Herein, we report the host–guest‐type complex formation between the host molecules cucurbit[7]uril (CB[7]), β‐cyclodextrin (β‐CD), and dibenzo[24]crown‐8 ether (DB24C8) and a newly synthesized triphenylamine (TPA) derivative 1 X₃ as the guest component. The host–guest complex formation was studied in detail by using ¹H NMR, 2D NOESY, UV/Vis fluorescence, and time‐resolved emission spectroscopy. The chloride salt of the TPA derivative was used for recognition studies with CB[7] and β‐CD in an aqueous medium. The restricted internal rotation of the guest molecule on complex formation with either of these two host molecules was reflected in the enhancement of the emission quantum yield and the average excited‐state lifetime for the triphenylamine‐based excited states. Studies with DB24C8 as the host molecule were performed in dichloromethane, a medium that maximizes the noncovalent interaction between the host and guest fragments. The Förster resonance energy transfer (FRET) process involving DB24C8 and 1 (PF₆)₃, as the donor and acceptor fragments, respectively, was established by electrochemical, steady‐state emission, and time‐correlated single‐photon counting studies.     

Syntheses,characterizations and crystal structures of new triorganotin complexes with 2‐mercaptopyrimidine and 4‐amino‐2‐mercaptopyrimidine

Four triorganotin(IV) complexes with 2‐mercaptopyrimidine (HSpym) and 4‐amino‐2‐mercaptopyrimidine (HSapym) of the type, R₃SnL (L= Spym, R=Ph, 1; R=PhCH₂, 2; L=Sapym, R=Ph, 3; R=PhCH₂, 4), were synthesized. All the complexes 1–4 have been characterized by elemental, IR, ¹H NMR, and X‐ray crystallography diffraction analyses, which revealed that the structures of 1–4 are penta‐coordinated with R₃Sn‐coordinated to the thiol S and heterocyclic N atoms, and the structural distortion for each is a displacement from tetragonal toward trigonal bipyramidal geometry. The complex 1 is a one‐dimensional chain complex, while compounds 3 and 4 are dimers due to the existence of N···H hydrogen bonding. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:69–75, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.20068     

Hydrogels Composed of Organic Amphiphiles and α‐Cyclodextrin: Supramolecular Networks of Their Pseudorotaxanes in Aqueous Media

Mixtures of N‐alkyl pyridinium compounds [py‐N‐(CH₂)_nOC₆H₃‐3,5‐(OMe)₂]⁺(X^?) ( 1b Cl: n=10, X=Cl; 1c Br: n=12, X=Br) and α‐cyclodextrin (α‐CD) form supramolecular hydrogels in aqueous media. The concentrations of the two components influences the sol–gel transition temperature, which ranges from 7 to 67 °C. Washing the hydrogel with acetone or evaporation of water left the xerogel, and ¹³C CP/MAS NMR measurements, powder X‐ray diffraction (XRD), and scanning electron microscopy (SEM) revealed that the xerogel of 1b Cl (or 1c Br) and α‐CD was composed of pseudorotaxanes with high crystallinity. ¹³C{¹H} and ¹H NMR spectra of the gel revealed the detailed composition of the components. The gel from 1b Cl and α‐CD contains the corresponding [2]‐ and [3]pseudorotaxanes, [ 1b? (α‐CD)]Br and [ 1b? (α‐CD)₂]Br, while that from 1c Br and α‐CD consists mainly of [3]pseudorotaxane [ 1c? (α‐CD)₂]Br. 2D ROESY ¹H NMR measurements suggested intermolecular contact of 3,5‐dimethoxyphenyl and pyridyl end groups of the axle component. The presence of the [3]pseudorotaxane is indispensable for gel formation. Thus, intermolecular interaction between the end groups of the axle component and that between α‐CDs of the [3]pseudorotaxane contribute to formation of the network. The supramolecular gels were transformed into sols by adding denaturing agents such as urea, C₆H₃‐1,3,5‐(OH)₃, and [py‐N‐nBu]⁺(Cl^?).     

Host Perturbation in a β‐Hydroquinone Clathrate Studied by Combined X‐ray/Neutron Charge‐Density Analysis: Implications for Molecular Inclusion in Supramolecular Entities

X‐ray/neutron (X/N) diffraction data measured at very low temperature (15 K) in conjunction with ab initio theoretical calculations were used to model the crystal charge density (CD) of the host–guest complex of hydroquinone (HQ) and acetonitrile. Due to pseudosymmetry, information about the ordering of the acetonitrile molecules within the HQ cavities is present only in almost extinct, very weak diffraction data, which cannot be measured with sufficient accuracy even by using the brightest X‐ray and neutron sources available, and the CD model of the guest molecule was ultimately based on theoretical calculations. On the other hand, the CD of the HQ host structure is well determined by the experimental data. The neutron diffraction data provide hydrogen anisotropic thermal parameters and positions, which are important to obtain a reliable CD for this light‐atom‐only crystal. Atomic displacement parameters obtained independently from the X‐ray and neutron diffraction data show excellent agreement with a |ΔU| value of 0.00058 Ų indicating outstanding data quality. The CD and especially the derived electrostatic properties clearly reveal increased polarization of the HQ molecules in the host–guest complex compared with the HQ molecules in the empty HQ apohost crystal structure. It was found that the origin of the increased polarization is inclusion of the acetonitrile molecule, whereas the change in geometry of the HQ host structure following inclusion of the guest has very little effect on the electrostatic potential. The fact that guest inclusion has a profound effect on the electrostatic potential suggests that nonpolarizable force fields may be unsuitable for molecular dynamics simulations of host–guest interaction (e.g., in protein–drug complexes), at least for polar molecules.