Synthesis and light‐emitting properties of carbazole‐based copolymers bearing cyano‐substituted arylenevinylene chromophore

Two arylenevinylene compounds bearing the cyano group at α‐position ( 6 ) and β‐position ( 9 ) from the dialkoxylphenylene unit were synthesized, in which the molecular termini were functionalized with 3‐bromocarbazole. The Suzuki coupling copolymerization of these compounds with 1,4‐bis[(3′‐bromocarbazole‐9′‐yl)methylene]‐2,5‐didecyloxybenzene and 9,9‐dihexylfluorene‐2,7‐bis(boronic acid) was carried out to obtain copolymers ( cp67 and cp97 ) containing the cyano‐substituted arylenevinylene fluorophore of 7 mol %. Model compounds ( 6 ′ and 9 ′) corresponding to the arylenevinylene fluorophore were also prepared. The UV spectra of copolymers resembled that of homopolymer hp with no arylenevinylene segment in both CHCl₃ solution and thin film. The emission maxima of copolymers in CHCl₃ (394 nm) agreed with that of homopolymer indicating that the emission bands originated from the carbazole‐fluorene‐carbazole segment. The emission maximum wavelength of copolymer cp67 in thin film (477 nm) indicated fluorescence from the cyano‐substituted arylenevinylene fluorophore because of the occurrence of fluorescence resonance electron transfer. In contrast, copolymer cp97 showed fluorescence at 528 nm to suggest the formation of a new emissive species such as a charge‐transfer complex (exciplex). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 91–98, 2010     

Synthesis and properties of through‐space conjugated polymers based on cyano‐substituted poly(p‐arylenevinylene)s

New through‐space cyano‐substituted poly(p‐arylenevinylene)s containing a [2.2]paracyclophane unit were synthesized by the Knoevenagel reaction. Polymers 5 and 7 have cyano groups at α‐positions and β‐positions from the dialkoxyphenylene unit, respectively. Their optical and electrochemical behaviors were investigated in detail in comparison with their model compounds. Polymers 5 and 7 exhibited through‐space conjugation via the cyclophane units. Polymer 5 showed greenish blue emission (λ_max = 477 nm) in diluted solution with fluorescence quantum efficiency (?_F) of only 0.007, whereas polymer 7 emitted in the bluish green region (λ_max = 510 nm) with ?_F of 0.32. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5979–5988, 2009     

Liquid crystalline epoxides with long lateral substituents: Mechanical and thermal properties

In this work, mechanical and thermal properties of liquid crystalline epoxides (LCEs) with long lateral substituents from 4 to 12 carbon atoms cured with diaminodiphenylmethane were evaluated and analyzed by dynamic mechanical analysis, tensile tests, scanning electron micrographs (SEM), and thermo‐gravimetrical analysis. The experimental results indicated that the Young's modulus and α, β transitions in crosslinked networks are associated with the length of lateral substituents. The plastic deformation in fracture surfaces was observed by SEM. Thermal stability, water and solvent absorption of cured networks was dependent on the length of lateral substituents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2835–2841, 2007     

Effect of chemical modifications on the electronic structure of poly(3‐hexylthiophene)

The widespread use of poly(3‐hexylthiophene) (P3HT) in the active layers of organic solar cells indicates that it possesses chemical stability and solubility suitable for such an application. However, it would be desirable to have a material that can maintain these properties but with a smaller bandgap, which would lead to more efficient energy harvesting of the solar spectrum. Fifteen P3HT derivatives were studied using the Density Functional Theory. The conclusion is that it is possible to obtain compounds with significantly smaller bandgaps and with solubility and stability similar to that of P3HT, mostly through the binding of oxygen atoms or conjugated organic groups to the thiophenic ring. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys., 2013     

Influence of fluorinated substituent and terminal length on phase behavior of mesogen‐jacketed liquid crystalline polymers with a biphenyl mesogen

A series of mesogen‐jacketed liquid crystalline polymers, poly{2,2,3,3,4,4,4‐heptafluorobutyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PF3Cm, where m is the number of carbon atoms in the alkoxy groups, and m = 1, 4, 6, and 8), the side chain of which contains a biphenyl core with a fluorocarbon substituent at one end and an alkoxy unit of varying length on the other end, were designed and successfully synthesized via atom transfer radical polymerization. For comparison, poly{butyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PC4Cm), similar to PF3Cm but with a butyl group instead of the fluorocarbon substituent, was also prepared. Differential scanning calorimetric results reveal that the glass transition temperatures (T_gs) of the two series of polymers decrease as m increases and T_gs of the fluorocarbon‐substituted polymers are higher than those of the corresponding butyl‐substituted polymers. Wide‐angle X‐ray diffraction measurements show that the mesophase structures of these polymers are dependent on the number of the carbon atoms in the fluorocarbon substituent and the property of the other terminal substituent. Polymers with fluorocarbon substituents enter into columnar nematic phases when m ≥ 4, whereas the polymer PF3C1 exhibits no liquid crystallinity. For polymers with butyl substituents, columnar nematic phases form when the number of carbon atoms at both ends of the side chain is not equal at high temperatures and disappear after the polymers are cooled to ambient temperature. However, when the polymer has the same number of carbon atoms at both ends of the side chain, a hexagonal columnar phase develops, and this phase remains after the polymer is cooled. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Recent developments in entropy‐driven ring‐opening metathesis polymerization: Mechanistic considerations,unique functionality,and sequence control

Entropy‐driven ROMP (ED‐ROMP) involves polymerization of olefin‐containing macrocyclic monomers under entropically favorable conditions. Macrocycles can be prepared from a variety of interesting molecules which, when polymerized, impart unique functionality to the resulting polymer backbone such as degradable linkages, biological moieties, crystallizable groups, or supramolecular hosts. In addition, the sequence of atoms in the cyclic monomer is preserved within the polymer repeating units, allowing for facile preparation of sequence‐defined polymers. In this review article, we consider how the mechanism of ROMP applies to ED polymerizations, how olefinic macrocycles are synthesized, and how polymerization conditions can be tuned to maximize conversion. Recent works in the past 10 years are highlighted, with emphasis on methods which can be employed to achieve fast polymerization kinetics and/or selective head‐to‐tail regiochemistry, thus improving polymerization control. ED‐ROMP, with its unique capability to produce polymers with well‐defined polymer backbone microstructure, represents an essential complement to other, well‐established, metathesis methodologies such as ROMP. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1621–1634     

Theoretical and experimental studies on the Raman spectra of electrosynthesized polynaphthalene

Polynaphthalene (Pnap) was electrosynthesized through the direct oxidation of naphthalene in boron trifluoride diethyl etherate and was characterized with IR and Raman spectroscopy, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectroscopy, and thermogravimetric analysis. Raman spectra of oligonaphthalene were calculated with Gaussian 98 at the B3LYP/6‐31G* level. Combining the computational and experimental results, we assigned the Raman bands of pristine Pnap. The Raman bands related to the chain‐stretching vibrations of Pnap around 1600 cm^?1 shifted to higher wave numbers as the polymerization degree increased. This phenomenon was in contrast to that of other conducting polymers bearing simple aromatic rings, such as polythiophene and polyfuran. The reason was that the condensed ring of Pnap and the steric repulsion of the interring hydrogen atoms prevented the elongation of conjugation sequences with the polymer chain length. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 241–251, 2005     

Electroluminescence from a conjugated polymer grafted with CdSe/ZnS: High brightness and improved efficiency

A new series of sulfide‐substituted poly(1,4‐phenylene vinylene) derivatives ( S1PPV–S3PPV ) with different composition ratios were successfully synthesized via the Gilch route. The CdSe/ZnS were grafted to the sulfur atoms by ligand exchange reaction. The grafted CdSe/ZnS contents were determined from TGA analysis to be from 4.6 to 37.8%. A new peak at 1151 cm^?1 formed in FT‐IR after ligand exchange, which is attributed to the force formation between sulfur and CdSe. The GPC results show that the molecular weights of final polymers became higher after ligand exchange. Thin films of obtained polymers emitted bright green and yellow light with the max emission peak located from 546 to 556 nm. Double‐layer LEDs with an ITO/PEDOT/polymer/Ca/Al configuration were fabricated to evaluate the potential use of these polymers. The turn‐on voltages of the devices were about 4–5 V. As the CdSe/ZnS content increased in grafted polymers, the device performance was significantly enhanced as compared to pristine polymers. In the case of S3PPV , the double‐layer device showed a maximum luminance of 6073 cd/m² with a current yield of 0.82 cd/A. The maximum luminance and current yield was enhanced to 13,390 cd/m² and 2.25 cd/A by grafting CdSe/ZnS onto polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5378–5390, 2006     

Thianthrene as an activating group for the synthesis of poly(aryl ether thianthrene)s by nucleophilic aromatic substitution

A method for the preparation of poly(aryl ether thianthrene)s has been developed in which the aryl ether linkage is generated in the polymer‐forming reaction. The thianthrene heterocycle is sufficiently electron‐withdrawing to allow fluoro displacement with phenoxides by nucleophilic aromatic substitution. The monomer for this reaction, 2,7‐difluorothianthrene, can be synthesized in a moderate yield by a simple reaction sequence. Semiempirical calculations at the PM3 level suggest that 2,7‐difluorothianthrene is sufficiently activated, whereas NMR spectroscopy (¹H and ¹³C) indicates that the monomer is only slightly activated or (¹⁹F) not sufficiently activated for nucleophilic aromatic substitution. Model reactions with p‐cresol have demonstrated that the fluorine atoms on 2,7‐difluorothianthrene are readily displaced by phenoxides in high yields, and the process has been deemed suitable for polymer‐forming reactions. High‐molecular‐weight polymers have been produced from bisphenol A, bisphenol AF, and 4,4′‐biphenol. The polymers have been characterized with gel permeation chromatography, NMR spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The glass‐transition temperatures for the polymers of different compositions and molecular weights range from 138 to 181 °C, and all the polymers have shown high thermooxidative stability, with 5% weight loss values in an air environment approaching 500 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6353–6363, 2004     

Highly stereo‐efficient synthesis and luminescence properties of novel trans‐regular vinylene– silylene–thiophene polymers

The novel trans‐stereo‐regular silylene–thiophene derivatives ( 4 , 5 ) with perfect consecutive silylene–arylene–silylene–vinylene linkage were synthesized via silylative coupling polycondensation of 2,5‐bis(vinyldimethylsilyl)thiophene ( 2 ) or 5,5′‐bis(vinyldimethylsilyl)‐2,2′‐bithiophene ( 3 ) catalyzed by ruthenium‐hydride complex [RuHCl(CO)(PCy₃)₂] ( 1 ). Their spectroscopic, absorption, and luminescence properties were characterized and compared with those of model compounds containing thiophene or bithiophene chromophores. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 127–137, 2008     

Synthesis,characterization, and organic field‐effect transistors study of conjugated D–A copolymers based on dialkylated naphtho[1,2‐b:5,6‐b′]dithiophene/naphtho[1,2‐b:5,6‐b′]difuran and benzodiathiazole/benzoxadiazole

In this report, four donor–acceptor copolymers, P(NDT3‐BT), P(NDT3‐BO), P(NDF3‐BT), and P(NDF3‐BO), using 5,10‐didodecyl‐naphtho[1,2‐b:5,6‐b′]dithiophene (NDT3) or 5,10‐didodecyl‐naphtho[1,2‐b:5,6‐b′]difuran (NDF3) as an electron‐rich unit and benzodiathiazole (BT) or benzoxadiazole (BO) as an electron‐deficient one, were designed, synthesized, and characterized. Detailed systematical investigation was developed for studying the effect of the S/O atoms on the optical, electrochemical, and morphological properties of the polymers, as well as the subsequent performance of the organic field‐effect transistors (OFETs) fabricated from these copolymers. It was found that, compared with NDF3‐based P(NDF3‐BT)/P(NDF3‐BO), by replacing NDF3 with stronger aromatic NDT3, the resultant P(NDT3‐BT)/P(NDT3‐BO) show smaller lamellar distance with an increased surface roughness in solid state, and relatively higher hole mobilities are obtained. The hole mobilities of the four polymers based on OFETs varied from 0.20 to 0.32 cm² V^?1 s^?1 depending on their molecular structures, giving some valuable insights for the further design and development of a new generation of semiconducting materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2465–2476     

Regioregular poly[3‐(4‐alkoxyphenyl)thiophene]s

An easy synthetic procedure for soluble poly[3‐(4‐alcoxyphenyl)thiophene]s is reported. The polymers present a high regioregularity degree as determined by both UV–vis spectra and ¹H and ¹³C NMR analysis. Furthermore, X‐ray powder diffraction analysis performed on films of the polymers suggests a π‐stacked packing structure of the macromolecules. Electrical characterization was performed on one of the synthesized polythiophenes on both undoped and doped (with FeCl₃ or iodine) films. The conductivity and charge‐carrier mobility were assessed by current–voltage and field effect measurements. Well‐structured polymer films were obtained simply via spin coating from chloroform solutions and without the need of further processing, unlike other regioregular polythiophenes reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1758–1770, 2007     

Scalable ambient synthesis of water‐soluble poly(β‐hydroxythio‐ether)s

Proton transfer polymerization through thiol‐epoxy “click” reaction between commercially available and hydrophilic di‐thiol and di‐epoxide monomers is carried out under ambient conditions to furnish water‐soluble polymers. The hydrophilicity of monomers permitted use of aqueous tetrahydrofuran as the reaction medium. A high polarity of this solvent system in turn allowed for using a mild catalyst such as triethylamine for a successful polymerization process. The overall simplicity of the system translated into a simple mixing of monomers and isolation of the reactive polymers in an effortless manner and on any scale required. The structure of the resulting polymers and the extent of di‐sulfide defects are studied with the help of 13C‐ and ¹H‐NMR spectroscopy. Finally, reactivity of the synthesized polymers is examined through post‐polymerization modification reaction at the backbone sulfur atoms through oxidation reaction. The practicality, modularity, further functionalizability, and water solubility aspects of the described family of new poly(β‐hydroxythio‐ether)s is anticipated to accelerate investigations into their potential utility in bio‐relevant applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3381–3386     

Synthesis and characterization of two classes of hyperstar polymers bearing hyperbranched cores grafted with linear arms

New hyperstar polymers (HSP) consisting of two different hyperbranched (hb) aromatic/aliphatic cores grafted with linear polymer arms were successfully synthesized. The hb cores were based on either hb poly(vinylbenzylchloride) synthesized by SCVP‐ATRP or hb polyester from a polycondensation reaction. For the core‐first approach, the hb cores have been modified to hb macroinitiators initiating either the cationic ring‐opening polymerization of oxazolines (Oxa) or the atom transfer radical polymerization of alkylmethacrylates. For potential use as reactive binders in epoxy coatings the HSPs were equipped with a defined amount of OH‐groups during arm growth via controlled block‐copolymerization with nonfunctionalized and OH‐functionalized monomers, either an oxazoline (OH)Oxa (2‐[1‐(hydroxymethyl)ethyl]‐oxazoline) or a methacrylate HEMA (2‐hydroxyethyl methacrylate). The amount of OH‐groups could be well adjusted in this way. The hyperstars were comprehensively characterized with respect to chemical structure and molecule dimension. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

Multifunctional,water‐soluble,C60‐pendant maleic anhydride copolymer

Starting from the synthesis of a new methanofullerene derivative bearing an alcohol group, we report on the preparation of a water‐soluble, fullerene‐pendant copolymer. This multifunctional, C₆₀‐pendant maleic anhydride copolymer was characterized by conductometric titration, Fourier transform infrared and ultraviolet spectroscopy, thermogravimetric analysis, and cyclic voltammetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5814–5822, 2005     

Nucleation of gold nanoparticles on latex particle surfaces

Gold particles were nucleated on functionalized (i.e., sulfonate or imidazole groups) latex particle surfaces. Gold ions were associated with the functional groups present on the surface of the latex particles by metal‐ligand formation and were then reduced to nucleate gold particles on the particle surface. The use of imidazole groups favored the metal‐ligand formation more effectively compared with sulfonic acid groups, so gold nucleation was investigated on the surface of imidazole‐functionalized model latex particles. The desorption of gold atoms or their surface migration first occurred during the reduction process and then gold nanoparticles were nucleated. The utilization of strong reductants, such as NaBH₄ and dimethylamine borane (DMAB) under mildly acidic conditions (i.e., pH 4) led to the deprotonation of imidazole‐rich polymer chains present on the surface of the model latex particles followed by deswelling of hydrophilic polymer surface layers. As a result, well‐dispersed gold nanoparticles were embedded in the hydrophilic polymer surface. On the other hand, the use of weak reductants led to the formation of localized gold aggregates on the surface of the latex particles. The removal of residual styrene monomer is very important because gold ions can be coordinated with the vinyl groups present in styrene monomer and would then be reduced by nucleophilic water addition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 912–925, 2008     

Stimuli‐responsive polymers. VIII. Polyesters and poly(ester amides) containing azobenzene and chiral binaphthylene segments: Highly adaptive materials endowed with light‐, heat‐, and solvent‐regulated optical rotatory power

Azobenzene‐modified polyesters and poly(ester amide)s fitted with chiral, atropisomeric binaphthylene segments were prepared by a series of low‐temperature polycondensation reactions carried out in polar solvent media. When compared with their polyaramide counterparts studied earlier, these materials had significantly improved solubility behaviors and were readily dissolved by a wide range of organic solvents. In solution, each of these constructs underwent photoinduced oscillations in optical rotatory power when subjected to multiple UV‐light/visible‐light illumination cycles that drove trans?cis isomerization reactions along their polymer chains. Light‐regulated chiroptical perturbations were dependent on polymer backbone structures and were further modulated by well‐coordinated temperature fluctuations and by the nature of the solvent medium employed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 207–218, 2006     

Polymer science with transition metals and main group elements: Towards functional,supramolecular inorganic polymeric materials

Inorganic polymers are relatively unexplored because the efficient formation of macromolecular chains from atoms of transition metals and main group elements has presented a synthetic challenge. Nevertheless, these materials offer exciting opportunities for accessing properties that are significantly different from and which therefore complement those available with the well‐established organic systems. Inorganic block copolymers are of particular interest for the generation of functional, nanoscale supramolecular architectures and hierarchical assemblies using self‐assembly processes. This article focuses on research in my group over the past decade, which has targeted the development of new and controlled routes to inorganic polymers and their subsequent use in forming supramolecular materials as well as studies of their properties and applications. The use of ring‐opening polymerization (ROP) and transition‐metal‐catalyzed polycondensation approaches are illustrated. Controlled ROP procedures have been developed that allow access to polyferrocene block copolymers that self‐assemble into interesting nanoscopic architectures such as cylinders and superstructures such as flowers. The future prospects for inorganic polymer science are discussed, and a growing emphasis on the study of supramolecular inorganic polymeric materials is predicted. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 179–191, 2002     

Synthesis and applications of cyano‐vinylene‐based polymers containing cyclopentadithiophene and dithienosilole units for photovoltaic cells

Two β‐cyano‐thiophenevinylene‐based polymers containing cyclopentadithiophene ( CPDT‐CN ) and dithienosilole ( DTS‐CN ) units were synthesized via Stille coupling reaction with Pd(PPh₃)₄ as a catalyst. The effects of the bridged atoms (C and Si) and cyano‐vinylene groups on their thermal, optical, electrochemical, charge transporting, and photovoltaic properties were investigated. Both polymers possessed the highest occupied molecular orbital (HOMO) levels of about ?5.30 eV and the lowest unoccupied molecular orbital (LUMO) levels of about ?3.60 eV, and covered broad absorption ranges with narrow optical band gaps (ca. 1.6 eV). The bulk heterojunction polymer solar cell (PSC) devices containing an active layer of electron‐donor polymers ( CPDT‐CN and DTS‐CN ) blended with an electron‐acceptor, that is, [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM), in different weight ratios were explored under 100 mW/cm² of AM 1.5 white‐light illumination. The PSC device based on DTS‐CN: PC₇₁BM (1:2 w/w) exhibited a best power conversion efficiency (PCE) value of 2.25% with V_oc = 0.74 V, J_sc = 8.39 mA/cm², and FF = 0.36. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and characterization of star polyfluorenes with a C60 core

C60‐cored star polyfluorenes were synthesized and fully characterized. A high yield (81%) hexakisaddition of C60 was developed by using Prato reaction and bulky fluorene addends. Suzuki polycondensation of the hexakisadducts of C60 carrying six 2‐bromofluorene addends and AB‐type monomer (2‐bromo‐9,9‐dioctylfluorenyl‐4,4,5,5‐tetramethyl‐ [1,3,2]‐dioxaborane) with Pd(PPh₃)₄ as the catalyst precursor afforded the desired C60‐cored star polyfluorenes. Their three‐dimensional structure can effectively reduce the aggregation of the polyfluorene chains. Annealing studies indicated that the C60‐cored star polyfluorenes are of good color stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4696–4706, 2007