Crosslinking‐induced morphology change of latex nanoparticles: A study of RAFT‐mediated polymerization in aqueous dispersed media using amphiphilic double‐brush copolymers as reactive surfactants

Amphiphilic double‐brush copolymers (DBCs) with each graft site quantitatively carrying both a hydrophilic poly(ethylene oxide) (PEO) graft and a hydrophobic polystyrene (PSt) graft are synthesized by sequential reversible addition‐fragmentation chain transfer (RAFT) polymerization and ring‐opening metathesis polymerization (ROMP). These DBCs are used as both surfactants and polyfunctional RAFT agents in the radical polymerization of St in aqueous dispersed media. Miniemulsions with narrowly dispersed St‐based nanodroplets are readily obtained after ultrasonication of the reaction mixtures. Without the presence of crosslinker, chain‐extension polymerization of St from the DBCs yields well‐defined polymeric latexes with narrow size distributions. However, with the presence of divinylbenzene (DVB) as the crosslinker, vesicular polymeric nanoparticles are formed as the major product. Such crosslinking‐induced change in morphology of the resulting latex nanomaterials may be ascribed to the increase of interfacial curvature in the heterophase systems during crosslinking polymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3250–3259     

Synthesis of single‐core and multiple‐core core‐shell nanoparticles by RAFT emulsion polymerization: Lead sulfide‐copolymer nanocomposites

We report here a simple and direct route for the preparation of lead sulfide (PbS) quantum dots (QDs) embedded into polymeric nanospheres by emulsion polymerization. In this process, QDs are first dispersed in an aqueous solution containing a statistical oligomer constituted of five butyl acrylate and ten acrylic acid units prepared by reversible addition fragmentation chain transfer (RAFT) polymerization using a trithiocarbonate as RAFT agent. Then, the dispersion of PbS QDs is engaged into an emulsion polymerization process to form core‐shell nanoparticles. Transmission electron microscopy reveals the presence of single‐core core‐shell particles at low concentration of PbS QD, whereas multiple‐core core‐shell particles containing either well separated or aggregated PbS QDs are formed at high concentration of PbS QDs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Atom transfer radical polymerization of n‐butyl acrylate from silica nanoparticles

This article reports the synthesis of atom transfer radical polymerization (ATRP) of active initiators from well‐defined silica nanoparticles and the use of these ATRP initiators in the grafting of poly(n‐butyl acrylate) from the silica particle surface. ATRP does not require difficult synthetic conditions, and the process can be carried out in standard solvents in which the nanoparticles are suspended. This “grafting from” method ensures the covalent binding of all polymer chains to the nanoparticles because polymerization is initiated from moieties previously bound to the surface. Model reactions were first carried out to account for possible polymerization in diluted conditions as it was required to ensure the suspension stability. The use of n‐butyl acrylate as the monomer permits one to obtain nanocomposites with a hard core and a soft shell where film formation is facilitated. Characterization of the polymer‐grafted silica was done from NMR and Fourier transform infrared spectroscopies, dynamic light scattering, and DSC. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4294–4301, 2001     

Single-Chain Folding Nanoparticles as Carbon Nanotube Catchers

This contribution describes a simple method for preparing polymeric nanoparticles using photodimerization of anthracene moieties on the side chain of terpolymers in dilute regime and transformation of obtained polymeric nanoparticles into pyrene functional nanoparticles via Menschutkin quaternization procedure. Subsequently, pyrene possessing polymeric nanoparticles are attached onto multiwalled carbon nanotube (MWCNT) surfaces by π–π stacking strategy. Gel permeation chromatography, thermal gravimetric analysis, ultraviolet–visible, and fluorescence spectroscopies are used to analyze modified nanoparticles and their precursors. Electron microscopy and dispersion studies show that pyrene-modified polymeric nanoparticles are able to interconnect various CNTs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2709–2714     

A convergence of photo‐bergman cyclization and intramolecular chain collapse towards polymeric nanoparticles

Employing enediynes as crosslinking precursors, a novel yet efficient strategy, namely photo‐triggered Bergman cyclization, was integrated with intramolecular chain collapse to yield polymeric nanoparticles with the size regime below 20 nm. Enediyne motif was designed delicately to possess a high photo‐reactivity, with the double bond locked in a methyl benzoate ring while triple bonds substituted with phenyls. Single electron transfer‐living radical polymerization was conducted to provide linear acrylate copolymers with controlled molecular weights and narrow polydispersities. Poly(butylarylate‐co‐ 5 ) went through UV‐irradiation with a concurrent Bergman cyclization, resulting in well‐defined ultrafine polymeric nanoparticles. Results from NMR, Raman scattering, photoluminescence and UV‐vis spectra corroborated the presence of conjugative structures in the polymeric nanoparticles, indicating the occurrence of photo‐induced Bergman cyclization. A series of other acrylate‐based nanoparticles were investigated to confirm the applicability of such a unique strategy in thermal sensitive but UV‐stable polymeric structures, making photo‐Bergman cyclization a promising tool towards polymeric nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Size‐controlled synthesis of soluble‐conjugated microporous polymer nanoparticles through sonogashira polycondensation in confined nanoreactors

Soluble conjugated polymeric nanoparticles were synthesized through Sonogashira polycondensation between different combinations of multifunctional alkynes and aryl halides in structurally well‐defined mesoporous reactors. The growth of the polymeric nanoparticles was controlled by the spatial confinement of the nanoreactors, giving conjugated polymeric nanoparticles with narrow size distribution centered at 5 nm. All the obtained polymers are freely soluble in common solvents and can be fabricated into thin film. Both of the solution and thin film prepared from these polymeric nanoparticles were highly fluorescent, endowing them potential applications in light emitting and other optoelectronic fields. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2285–2290     

Macromolecular surfactants for miniemulsion polymerization

The use of polymeric surfactants as stabilizers in miniemulsion polymerization was reviewed. The structural characteristics of reported polymeric surfactants were detailed and compared. The concept of multi-functional polymeric surfactants was evidenced. The specificities brought by polymeric surfactants in the process of miniemulsion polymerization in comparison to molecular surfactants were analysed for the stability of the initial monomer emulsion, polymerization kinetics and characteristics of the obtained latexes. The contribution of polymeric surfactants to the control of the characteristics of the obtained nanoparticles was detailed with regard to the nature of the core material and to the surface coverage. Polymeric surfactants can be seen as powerful tools for the design of original nanoparticles. On the basis of the available data, possible research topics are suggested.     

Preparation and characterization of poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L‐lactide) polymer nanoparticles

A poly(D,L ‐lactide)–bromine macroinitiator was synthesized for use in the preparation of a novel biocompatible polymer. This amphiphilic diblock copolymer consisted of biodegradable poly(D,L ‐lactide) and 2‐methacryloyloxyethyl phosphorylcholine and was formed by atom transfer radical polymerization. Polymeric nanoparticles were prepared by a dialysis process in a select solvent. The shape and structure of the polymeric nanoparticles were determined by ¹H NMR, atomic force microscopy, and ζ‐potential measurements. The results of cytotoxicity tests showed the good cytocompatibility of the lipid‐like diblock copolymer poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L ‐lactide). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 688–698, 2007     

Anisotropic janus magnetic polymeric nanoparticles prepared via miniemulsion polymerization

Anisotropic Janus magnetic polymeric nanoparticles are prepared via the miniemulsion polymerization of styrene and acrylic acid monomers in the presence of oleic acid‐coated magnetic nanoparticles (MNPs). The controllable phase separation between the polymer matrix and the encapsulated MNPs is a key success factor to produce Janus morphology. The effects of MNPs, 2,2′‐azobis(2‐isobutyronitrile) and sodium dodecyl sulfate contents, on the morphology, chemical composition and colloidal stability of the prepared Janus hybrid particles are investigated. Besides the determination of polymerization conversion, zeta potential, size analysis, TGA, and TEM are applied for characterization of the anisotropic particles. The results show the stable spherical Janus particles containing MNPs (15 wt % magnetic content) located on one side of each polymer particle. The anisotropic submicron Janus magnetic polymeric particles (250 nm) can be easily separated by an external magnet. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4779–4785     

From well‐defined diblock copolymers prepared by a versatile atom transfer radical polymerization method to supramolecular assemblies

The synthesis of well‐defined diblock copolymers by atom transfer radical polymerization (ATRP) was explored in detail for the development of new colloidal carriers. The ATRP technique allowed the preparation of diblock copolymers of poly(ethylene glycol) (PEG) (number‐average molecular weight: 2000) and ionic or nonionizable hydrophobic segments. Using monofunctionalized PEG macroinitiator, ionizable and hydrophobic monomers were polymerized to obtain the diblock copolymers. This polymerization method provided good control over molecular weights and molecular weight distributions, with monomer conversions as high as 98%. Moreover, the copolymerization of hydrophobic and ionizable monomers using the PEG macroinitiator made it possible to modulate the physicochemical properties of the resulting polymers in solution. Depending on the length and nature of the hydrophobic segment, the nonionic copolymers could self‐assemble in water into nanoparticles or polymeric micelles. For example, the copolymers having a short hydrophobic block (5 < degree of polymerization < 9) formed polymeric micelles in aqueous solution, with an apparent critical association concentration between 2 and 20 mg/L. The interchain association of PEG‐based polymethacrylic acid derivatives was found to be pH‐dependent and occurred at low pH. The amphiphilic and nonionic copolymers could be suitable for the solubilization and delivery of water‐insoluble drugs, whereas the ionic diblock copolymers offer promising characteristics for the delivery of electrostatically charged compounds (e.g., DNA) through the formation of polyion complex micelles. Thus, ATRP represents a promising technique for the design of new multiblock copolymers in drug delivery. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3861–3874, 2001     

Production of crosslinked,hollow nanoparticles by surface‐initiated living free‐radical polymerization

Surface‐initiated living free‐radical polymerization is employed in a multistep procedure to prepare hollow polymeric nanocapsules. Initially, trichlorosilyl‐substituted alkoxyamine initiating groups are attached to the surface silanol groups of silica nanoparticles. This surface layer of initiating groups is then used to grow functionalized linear chains leading to a core–shell morphology. The choice of functional groups is governed by their ability to undergo facile crosslinking reactions, with both active ester and benzocyclobutene groups being examined. Under either chemical or thermal conditions, the reaction of these functionalities gives a crosslinked polymeric shell that is covalently attached to, and surrounds, the central silica core. Removal of the silica core with HF then gives the hollow polymeric nanocapsules, which are stable under solvent dissolution and thermal treatment because of their crosslinked structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1309–1320, 2002     

Functional polymers by living anionic polymerization

The application of living anionic polymerization techniques for the functionalization of polymers and block copolymers is reviewed. The attachment of functional groups to polymeric chains of predetermined lengths and narrow molecular weight distributions is described. Carboxyls, hydroxyls, amines, halogens, double bonds, and many other functional groups can be placed at one or two ends in the center or evenly spaced along polymeric chains. Subsequent transformations of the functional groups further contribute to the versatility of such treatments. General methods based on the use, as terminators, of substituted haloalkanes, as well as the addition of living polymers or their initiators to diphenylethylenes, substituted with appropriate functional groups or molecules, are discussed. Another approach, based on the living polymerization of monomers with protected functional groups, is also discussed. It has been used for the preparation of polymers and copolymers with evenly spaced functional groups. The combination of living anionic polymerization techniques with controlled radical and cationic polymerizations is also described. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2116–2133, 2002     

Building nanostructures using RAFT polymerization

Reversible addition fragmentation chain transfer (RAFT) polymerization is one of the most extensively studied controlled/living radical polymerization methods that has been used to prepare well‐defined nanostructured polymeric materials. This review, with more 650 references illustrates the range of well‐defined functional nanomaterials that can be accessed using RAFT chemistry. The detailed syntheses of macromolecules with predetermined molecular weights, designed molecular weight distributions, controlled topology, composition and functionality are presented. RAFT polymerization has been exploited to prepare complex molecular architectures, such as stars, blocks and gradient copolymers. The self‐assembly of RAFT‐polymer architectures has yielded complex nanomaterials or in combination with other nanostructures has generated hybrid multifunctional nanomaterials, such as polymer‐functionalized nanotubes, graphenes, and inorganic nanoparticles. Finally nanostructured surfaces have been described using the self‐organization of polymer films or by the utilization of polymer brushes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

CNT templated regioselective enzymatic polymerization of phenol in water and modification of surface of MWNT thereby

Carbon nanotubes (CNTs) are used as templates to synthesize regioselective polymers from enzymatic polymerization of phenol in water. About 90% of total polymeric units in the obtained polymers are the highly thermally stable oxyphenylene units. The polymer‐yields are dependent on the quantities of CNTs used. On the basis of MWNT‐templated enzymatic polymerization of phenol, covalent attachment of polyphenol chains to the surface of MWNT by way of a linking molecule, hydroquinone, is achieved. This approach supplies a novel way for producing high‐performance polymers and for functionalization of the surface of CNT. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1627–1635, 2009     

Polymerization of cyclic imino ethers: From its discovery to the present state of the art

Topics concerning the cationic ring‐opening polymerization of cyclic imino ethers and functional material production based on the resulting polymers are reviewed. Cyclic imino ethers are readily subjected to isomerization polymerization via cationic initiators. Mechanistic studies have provided a new concept, electrophilic polymerization. Double isomerization polymerization and no‐catalyst alternating copolymerization are interesting examples that show characteristics of the ring opening of cyclic imino ethers. The living polymerization of these monomers affords precisely controlled polymeric materials. Through the use of the unique properties of the product polymers, various functional polymeric materials, such as polymeric nonionic surfactants, compatibilizers, hydrogels, stabilizers for dispersion polymerization, biocatalyst modifiers, and supramolecular assemblies, have been developed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 192–209, 2002     

A novel protocol for the preparation of uniform polymer microspheres with high yields through step polymerization of isophorone diisocyanate

Uniform polymer microspheres with neat surface are of high interests. Precipitation polymerization of vinylic monomers remains a very limited process owing to very low monomer concentration allowed. Here, a fully novel protocol for the production of uniform polymeric microspheres is presented. Using one single monomer, isophorone diisocyanate, highly monodisperse polyurea microspheres were achieved with very high yield in a very short time period via precipitation polymerization in water–acetone mixed solvent. Results demonstrated that the ratio of water–acetone and polymerization temperature played important roles in the process. The size of the microspheres was readily adjustable by varying monomer concentration, water/acetone ratio or polymerization temperature. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of photoactive single‐chain folded polymeric nanoparticles via combination of radical polymerization techniques and Menschutkin click chemistry

This contribution reports that synthesis of polystyrene based photoactive polymeric nanoparticles by radical copolymerization and Menschutkin Chemistry methodology. In the first step, poly(styrene‐co‐chloromethyl styrene) was achieved by thermally initiated radical copolymerizations and subsequently copolymers were reacted to commercially available Type II photoiniator (Michler's ketone) in dilute condition in order to achieve intramolecular crosslinked polymeric nanoparticles. After the characterization studies, polymeric nanoparticles were used for free radical photopolymerization of methacrylic formulations to determine the initiation efficiency. Upon UV irradiation, resulting polymeric nanoparticle lost its globular structure by releasing benzophenone part and transformed into linear copolymer analogue. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1998–2003     

Use of a trithiocarbonyl RAFT agent without modification as (Co)stabilizer in miniemulsion polymerization

Herein, we demonstrate the effects of using 4‐cyano‐4‐[(dodecylsulfanylthiocarbonyl)sulfanyl] pentanoic acid (CDPA) simultaneously as RAFT chain transfer agent (RAFT‐CTA) and (co)stabilizer in a miniemulsion polymerization process. The novelty of this report includes use this RAFT‐CTA without modification, such as macro‐CTAs, block, or random copolymers. Using an optimized polymerization procedure, it is possible to use distinct formulations and therefore obtain stable latexes comprised of well‐defined spherical nanoparticles. The polymerization kinetics and final polymer properties are directly correlated to the function of the CDPA in the system: RAFT‐CTA and/or (co)stabilizer. Typically, the nanoparticles present average diameters less than 150 nm. The molar mass properties and the kinetic profiles confirm to an expected RAFT process, although some deviations are observable when using the CDPA as only stabilizer. These deviations are a function of the amount of CDPA present within the nano‐droplets, or adsorption on its surface. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1687–1695     

Novel active ester‐bridged copolynorbornene materials containing terminal functional hydroxyl,amino, methacryloyl,or ammonium groups via ring‐opening metathesis polymerization

Several random and block copolynorbornenes with side chains containing terminal hydroxyl, amino, methacryloyl or ammonium groups were derived from the functional alkyl ester‐containing norbornenes by ring‐opening metathesis polymerization (ROMP). The main chain of ROMP‐type polynorbornene had a more important role for glass‐transition temperature in comparison with vinyl addition polymerization. There is little effect on glass‐transition temperature (about ?39 °C) of polynorbornenes with different length of alkyl side chain. The organosoluble copolynorbornenes with active crosslinkable methylacryloyl side chains derived from functional hydroxyl group were prepared to improve the thermal stability of poly(methyl methacrylate) [decomposition temperature (T_d)^10% = 325 °C in nitrogen] by forming networked AB crosslinked polymer (T = 367 °C in nitrogen). The sizes of nanometer‐scale polymeric micelles of block copolymers having hydrophobic alkyl ester and hydrophilic ammonium groups were measured in the range of 11–25 nm by scanning electron microscopy. These polymeric materials with various functional groups or amphiphilic architectures are accessible by ROMP, whose topology makes them particularly attractive for application potential such as biomedical and photoelectric materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4233–4247, 2005     

Tailored composite polymer–metal nanoparticles by miniemulsion polymerization and thiol‐ene functionalization

A simple and modular synthetic approach, based on miniemulsion polymerization, has been developed for the fabrication of composite polymer–metal nanoparticle materials. The procedure produces well‐defined composite structures consisting of gold, silver, or MnFe₂O₄ nanoparticles (～10 nm in diameter) encapsulated within larger spherical nanoparticles of poly(divinylbenzene) (～100 nm in diameter). This methodology readily permits the incorporation of multiple metal domains into a single polymeric particle, while still preserving the useful optical and magnetic properties of the metal nanoparticles. The morphology of the composite particles is retained upon increasing the inorganic content and also upon redispersion in organic solvents. Finally, the ability to tailor the surface chemistry of the composite nanoparticles and incorporate steric stabilizing groups using simple thiol‐ene chemistry is demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1594–1606, 2010