Preparation of core-shell magnetic Fe3O4@SiO2-dithiocarbamate nanoparticle and its application for the Ni2+, Cu2+ removal

A typical superparamagnetic nanoparticles-based dithiocarbamate absorbent (Fe₃O₄@SiO₂-DTC) with core-shell structure was applied for aqueous solution heavy metal ions Ni²⁺, Cu²⁺ removal.     

A fast,highly selective and sensitive dansyl-based fluorescent sensor for copper (II) ions and its imaging application in living cells

Since the copper ions (Cu²⁺) play a fatal role in many foundational physiological processes, it is important to develop a simple, highly sensitive and selective sensor for Cu²⁺ detection in living systems. Herein, an intramolecular charge transfer (ICT) and dansyl-based fluorescent chemosensor 1 was designed, synthesized and characterized for the sensitive and selective quantification of Cu²⁺. It exhibited remarkable fluorescence quenching upon addition of Cu²⁺ over other selected metal ions, attributed to the complex formation between 1 and Cu²⁺ with the association constant 6.7 × 10⁵ M^?1. The sensor 1 showed a fast and linear response towards Cu²⁺ in the concentration range from 0 to 12.5 × 10^?6 mol L^?1 with the detection limit of 2.5 × 10^?7 mol L^?1. This detection could be carried out in a wide pH range of 5.0–14. Furthermore, sensor 1 can be used for detecting Cu²⁺ in living cells.     

Toward a highly sensitive and selective indole-rhodamine-based light-up probe for Hg2+ and its application in living cells

We herein designed and synthesized a light-up fluorescent probe L1 for Hg²⁺ species, which is based on indole derivative and Rhodamine fluorophore. The new probe can show a linear response to Hg²⁺ with high sensitivity and selectivity. As the Hg²⁺ concentration changed from 0 to 450 μM, the fluorescence intensity of L1 at 575 nm changed from 50 to 6181 (～120-fold). The detection limit of the probe was 5.0 × 10^?8 M. Besides, we have successfully applied L1 to monitor Hg²⁺ species in living MCF-7 cells by way of fluorescence imaging.     

A Schiff base fluorescence probe for highly selective turn-on recognition of Zn2+

A simple Schiff base CTS, synthesized between 2-hydroxy-1-naphthaldehyde and 2-benzylthio-ethanamine, was found to be a good turn-on fluorescence probe for the detection of Zn²⁺, due to the restriction of the rotation of the bond between CN and naphthalene ring and/or the blocking of the photo-induced electron transfer (PET) mechanism of the nitrogen atom to naphthalene ring. Excellent selectivity for Zn²⁺ was evidenced, over many other competing ions, including Fe³⁺, Cr³⁺, Ni²⁺, Co²⁺, Fe²⁺,Mn²⁺, Ca²⁺, Hg²⁺, Pb²⁺, Cu²⁺, Mg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Li⁺, K⁺, and Na⁺, in EtOH/HEPES buffer (95:5, v/v, pH = 7.4). It was noteworthy that Cd²⁺ had no interference with Zn²⁺. The stoichiometric complex of CTS-Zn²⁺ was determined to be 2:1 for CTS and Zn²⁺ in molar, based on the Job plot and single crystal X-ray diffraction data. The binding constant of the complex was 85.7 M^?2 with a detection limit of 5.03 × 10^?7 M. The fluorescence bio-imaging capability of CTS to detect Zn²⁺ in live cells was also studied. These results indicated that CTS could serve as a favorable probe for Zn²⁺.     

Quinoline-based highly selective and sensitive fluorescent probe specific for Cd2+ detection in mixed aqueous media

Quinoline-based fluorescent probe as a recognition unit was designed and synthesized in this study. The probe R1 displayed excellent selectivity and sensitivity for cadmium ions (Cd²⁺) over a wide range of metal ions in acetonitrile-water (MeCN-H₂O) mixed solution. In order to better understand the recognition mechanism between probe and Cd²⁺, the density functional theory calculations were performed. Finally, the colorimetric experiment result was observed and conveniently monitored by the naked eye, and a visual detection limit of 4 × 10^?6 mol L^?1 was achieved. These experimental results indicated the promising potential of the probe to detect Cd²⁺ in biological system. Furthermore, the probe R1 was successfully used for the highly sensitive detection of Cd²⁺ in living cells.     

A simple highly sensitive and selective turn-on fluorescent chemosensor for the recognition of Pb2+

A simple highly sensitive and selective turn-on fluorescent chemosensor L based on bis-Schiff-base for Pb²⁺ ions was synthesized and characterized by spectroscopic techniques. L having high binding affinity towards Pb²⁺ ions of 2.10 × 10⁴ M^?1 selectively detects Pb²⁺ ions with almost no interference among various competitive ions by a 11-fold fluorescent enhancement in CH₃CN/H₂O (95:5, v/v) solution over a wide pH range. Moreover, sensor L displayed a lower detection limit of 3.80 × 10^?7 M, which is low enough for sensing sub-millimolar concentration of Pb²⁺ encountered practically.     

Synthesis and evaluation of two novel rhodamine-based fluorescence probes for specific recognition of Fec+ ion

Two low cytotoxic fluorescence probes Rb1 and Rb2 detecting Fe³⁺ were synthesized and evaluated. Rb1 and Rb2 exhibited an excellent selectivity to Fe³⁺, which was not disturbed by Ag⁺, Li⁺, K⁺, Na⁺, NH₄⁺, Fe²⁺, Pb²⁺, Ba²⁺, Cd²⁺, Ni²⁺, Co²⁺, Mn²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Ca²⁺, Cu²⁺, Ce³⁺, AcO^?, Br^?, Cl^?, HPO₄^2?, HSO₃^?, I^?, NO₃^?, S₂O₃^2?, SO₃^2? and SO₄^2? ions. The detection limits were 1.87 × 10^?7 M for Rb1 and 5.60 × 10^?7 M for Rb2, respectively. 1:1 stoichiometry and 1:2 stoichiometry were the most likely recognition mode of Rb1 or Rb2 towards Fe³⁺, and the corresponding OFF–ON fluorescence mechanisms of Rb1 and Rb2 were proposed.     

A fluorescent sensor for Al3+ based on a photochromic diarylethene with a hydrazinobenzothiazole Schiff base unit

A new fluorescent turn-on chemosensor for Al³⁺ based on a diarylethene unit was designed and synthesized. Photochromism, fluorescence switch, and metal ion recognition behaviors of this diarylethene derivative were investigated by absorption and fluorescence emission spectra. It shows an outstanding fluorometric sensing ability toward Al³⁺ ion, and the detection limit was measured to be 9.3 × 10^?8 mol L^?1 via fluorescence methods. Based on these interesting properties, a combinational logic circuit was constructed successfully.     

Complex formation between manganese(II), cobalt(II), nickel(II), copper(II) and a series of new ligands derived from N,N′-O-phenylenebis(salicylideneimine)

A series of new ligands derived from N,N′-O-phenylenebis(salicylideneimine) have been synthesized and characterized by spectrometric methods. Their protonation constants and the stability constants of their complexes with Mn²⁺, Co²⁺, Ni²⁺ et Cu²⁺ have been determined by potentiometric methods in a water–ethanol (90:10 v/v) mixture at a 0.2 mol l⁻¹ ionic strength (NaCl) and at 25.0 ± 0.1 °C. The Sirko program was used to determine the protonation constants as well as the binding constants of both species [M(HL)]⁺ and [ML]. The stability order obtained is in agreement with Irving–Williams series.     

A sensitive tetraphenylethene-based fluorescent probe for Zn2+ ion involving ESIPT and CHEF processes

A new tetraphenylethene-based fluorescent probe 2-(quinolin-8-yliminomethyl)-4-triphenylvinyl-phenol (HL) for detecting Zn²⁺ ion through the excited state intramolecular proton transfer (ESIPT) and chelation enhanced fluorescence (CHEF) processes has been designed and synthesized. The results show that HL emits relatively strong blue fluorescence at 460 nm without Zn²⁺ ion, however, probe HL displays highly pink fluorescent emission at 600 nm when adding Zn²⁺ ion. The fluorescent emission of HL appears an extremely large Stokes shift, which effectively reduces the interference of background signal. The limit of detection of HL for Zn²⁺ ion can reach to 9.0 × 10^–8 M.     

A highly selective colorimetric and fluorescent chemosensor for Cr2+ in aqueous solutions

A new rhodamine-based chemosensor was synthetized through a modified copper-catalyzed [3+2]-cycloaddition of an azidocoumarin with an alkynyl-rhodamine. Its sensing properties toward various metal cations in aqueous solutions were investigated by colorimetric changes, UV–vis and fluorescence spectroscopies. The sensor exhibited a high selectivity for Cr²⁺ over Cr³⁺ and other divalent cations such as Cu²⁺, Mg²⁺, Zn²⁺, Ca²⁺, Cd²⁺, Co²⁺, Hg²⁺ and Ni²⁺. The linear range of detection by fluorescence spectroscopy is 0.07–3.5 mM, with a detection limit of ca. 64 μM. The binding mode of Cr²⁺ with the sensor was rationalized through experimental evidences.     

Significant improved electrochemical performance of Li(Ni1/3Co1/3Mn1/3)O2 cathode on volumetric energy density and cycling stability at high rate

Li(Ni_1/3Co_1/3Mn_1/3)O₂ microspheres with a tap density of 2.41 g cm⁻³ have been synthesized for applications in high power and high energy systems, using a simple rheological phase reaction route. Cyclic voltammograms (CV) showed no shift of anodic and cathodic peaks centred at 3.81, 3.69 V for the Ni²⁺/Ni⁴⁺ couple after first cycle. The results of power pulse area specific impedance (ASI) and differential scanning calorimetry (DSC) tests showed lower power impedance and increased thermal stability of the electrode at high rate. These merits mentioned above provided significant improved capacity and rate performance for Li(Ni_1/3Co_1/3Mn_1/3)O₂ microspheres, which 159, 147 mAh g⁻¹ discharge capacity was delivered after 100 cycles between 2.5–4.6 V vs. Li at a different discharge rate of 2.5 C (500 mA g⁻¹), 5 C and a constant 0.5 C charge rate, respectively.     

A novel colorimetric chemosensor based on quinoline for the sequential detection of Fe3+ and PPi in aqueous solution

A novel quinoline-functionalized Schiff-base derivative PY was designed and synthesized. Sensor PY displayed highly selective and sensitive fluorescence enhancement and naked-eye color change to Fe³⁺ in the presence of other competing cations. The mechanisms have been supported by Job’s plot evaluation, FT-MS and theoretical calculations. The in situ generated PY-Fe³⁺ complex solution exhibited a high selectivity toward PPi via Fe³⁺ displacement approach. The detection limits of sensor PY to Fe³⁺ and PY-Fe³⁺ complex to PPi were estimated to be 4.24 × 10^?8 M and 8.18 × 10^?8 M, respectively. This successive recognition feature of sensor PY makes it has a potential utility for Fe³⁺ and PPi detection in aqueous solution. A B3LYP/6-31G(d,p) basis set was employed for optimization of PY and PY-Fe³⁺ complex.     

Syntheses,crystal structures and magnetic properties of coordination polymers Ni(NO2)2 and Ni(4,4′-bipy)(NO2)2

Two new coordination polymer frameworks Ni(NO₂)₂ (1) and Ni(4,4′-bipy)(NO₂)₂ (2) (4,4′-bipy = 4,4′-bipyridine) were synthesized by solvothermal reaction in formamide, and were characterized by elemental analysis, IR spectroscopy, single crystal X-ray diffraction, and magnetic measurement. In compound 1, each Ni²⁺ ion is linked with four neighboring Ni²⁺ ions through μ_1,3-nitrito bridges forming 2D layered structure. In compound 2, each Ni²⁺ ion is bridged with six neighboring Ni²⁺ ions through four μ_1,3-nitrito groups and two 4,4′-bipy ligands forming 3D structure. Magnetic measurements show weak ferromagnetism within framework of the two compounds with T_N = 19 K (1) and 21 K (2).     

A simple and highly selective fluorescent sensor for palladium based on benzofuran-2-boronic acid

Benzofuran-2-boronic acid could be used as a fluorescent sensor for the detection of Pd²⁺ because it was rapidly converted to highly fluorescent derivative after mixing with Pd²⁺ under basic condition at room temperature. We found that dimerization of benzofuran was occurred to form fluorescent derivative by the catalytic activity of palladium. The fluorescence intensity at 360 nm increased with increasing the concentration of Pd²⁺. The excellent selectivity for Pd²⁺ was demonstrated among other metal ions. Based on this findings, we successfully applied benzofuran-2-boronic acid to develop a microplate-based assay for high-throughput measurement of Pd²⁺. The detection limit (blank + 3SD) for Pd²⁺ of the proposed assay was 9.8 nM.     

Cu2+-selective turn-on fluorescence signaling based on metal-induced hydrolysis of pyrenecarbohydrazide

We developed a simple Cu²⁺-selective turn-on fluorescence signaling probe based on the hydrolysis of 1-pyrenecarbohydrazide (1) to 1-pyrenecarboxylic acid. Probe 1 exhibited prominent fluorescence signaling of Cu²⁺ ions in a 10% aqueous Tris-buffered (pH 7.0) DMSO solution with a detection limit of 5.93 × 10^?8 M. Signaling with control compounds derived from pyreneacetic acid and pyrenebutyric acid showed that the fluorescence signal became less pronounced as the distance between the hydrazide functionality and the pyrene fluorophore increased. As a practical application, this probe was employed for the determination of Cu²⁺ in a simulated semiconductor wastewater.     

Thermal decomposition pathway of undoped and doped zinc layered gallate nanohybrid with Fe3+, Co2+ and Ni2+ to produce mesoporous and high pore volume carbon material

A series of brucite-like materials, undoped and doped zinc layered hydroxide nitrate with 2% (molar) Fe³⁺, Co²⁺ and Ni²⁺ were synthesized. Organic–inorganic nanohybrid material with gallate anion as a guest, and zinc hydroxide nitrate, as an inorganic layered host was prepared by the ion-exchange method. The nanohybrid materials were heat-treated at various temperatures, 400–700 °C. X-ray diffraction, thermal analysis and also Fourier transform infrared results showed that incorporation of the doping agents within the zinc layered hydroxide salt layers has enhanced the heat-resistivity of the nanohybrid materials in the thermal decomposition pathway. Porous carbon materials can be obtained from the heat-treating the nanohybrids at 600 and 700 °C. Calcination of the nanohybrids at 700 °C under nitrogen atmosphere produces mesoporous and high pore volume carbon materials.     

Highly sensitive fluorescent sensor targeting CuCl2 based on thiophene attached anthracene compound (TA)

A novel thiophene attached anthracene (TA) based fluorescent compound was designed and synthesized. The TA showed a high quantum yield (Qy = 0.34) in regard to fluorescence. We applied this TA compound to detect specific metal compound and found that it could identify CuCl₂ from other metals through dramatic fluorescence change at λ_max = 460 nm. It showed strong quenching fluorescence property with CuCl₂ while with other metal compounds it exhibited strong blue fluorescence emission. UV/Vis absorption spectroscopy clearly demonstrated that the quenching property of TA at λ_max = 460 nm was due to overlapping of the fluorescence peak of TA at λ_max = 460 nm and the absorption band of CuCl₂ (from 190 nm to 525 nm). Binding constant (K′), which was 0.0895 mM^?2, indicated a complexation ratio between TA and CuCl₂ as 1:2 and this interaction induced quenching property.     

Improved activity of SnO for the photocatalytic oxygen evolution

SnO prepared by soft chemistry exhibits a black color and semiconducting properties. The X-ray diffraction indicates a tetragonal symmetry (SG: P4/nmm) with nano crystallites of an average size of 85 nm. The forbidden band, determined from the diffuse reflectance is found to be 1.46 eV. The electrical conductivity occurs by polaron hopping and follows an Arrhenius type law with activation energy of 0.21 eV, the change in the slope at 526 K is attributed to the oxidation to SnO₂. The photo-electrochemical study shows n type conduction with a flat band potential of ?0.45 V, close to the photocurrent onset potential (?0.40 V). The electrochemical impedance spectroscopy shows the bulk contribution of SnO (R_b = 1.7 kΩ cm²) and decreases down to 1.89 kΩ cm² under illumination. The photocatalytic properties have been evaluated for the first time for to the oxygen evolution. The valence band, deriving from Sn²⁺: 5p orbital with a potential (?0.80 V_SCE/5.55 eV), is suitably positioned with respect to O₂/H₂O level (～0.6 V_SCE), leading to water oxidation under visible light. The best performance occurs at pH ～ 7 with an oxygen liberation rate of 23 µmol mL h^?1 (mg catalyst)^?1 and a quantum efficiency of 1.2%. An improvement of ～13% is observed on the system SnO/clay.     

A benzothizole-based fluorescent probe for Hg2+ recognition utilizing ESIPT coupled AIE characteristics

A new benzothizole-based fluorescent probe 1 for Hg²⁺ recognition utilizing “ESIPT+AIE” strategy has been developed. In THF/H₂O (1:1, v/v, PBS 20 mM, pH = 8.5) mixed solution, probe 1 displays rapid fluorescence responses to Hg²⁺ ions with high selectivity and sensitivity through Hg²⁺-triggered releasing of a compound possessing “ESIPT+AIE” characteristics. Cell imaging investigations indicate that probe 1 is cell permeable with low toxicity to MCF-7 cells, and applicable to detect Hg²⁺ ions in living MCF-7 cells.