Fabrication of Poly(L‐lactide)‐block‐Poly(ethylene glycol)‐block‐Poly(L‐lactide) Triblock Copolymer Thin Films with Nanochannels: An AFM Study

This paper aims to report the fabrication of biodegradable thin films with micro‐domains of cylindrical nanochannels through the solvent‐induced microphase separation of poly(L ‐lactide)‐block‐poly(ethylene glycol)‐block‐poly(L ‐lactide) (PLA‐b‐PEG‐b‐PLA) triblock copolymers with different block ratios. In our experimental scope, an increase in each of the block lengths of the PLA and PEG blocks led to both a variation in the average number density (146 to 32 per 100 µm²) and the size of the micro‐domains (140 to 427 nm). Analyses by atomic force microscopy (AFM) and fluorescence microscopy indicated that the hydrophilic PEG nanochannels were dispersed in the PLA matrix of the PLA‐b‐PEG‐b‐PLA films. We demonstrated that the micro‐domain morphology could be controlled not only by the block length of PEG, but also by the solvent evaporation conditions.

     

pH/Thermosensitive Hydrogels Formed at Low pH by a PMMA‐PAA‐P2VP‐PAA‐PMMA Pentablock Terpolymer

A poly(methyl methacrylate)‐block‐poly(acrylic acid)‐block‐poly(2‐vinyl pyridine)‐block‐poly(acrylic acid)‐block‐poly(methyl methacrylate) (PMMA‐PAA‐P2VP‐PAA‐PMMA), pentablock terpolymer has been synthesized by anionic polymerization with sequential addition of monomers and studied in aqueous media at low pH. The system exhibits combined properties and adopts the behavior of ‘telechelic’ polyelectrolytes and that of double hydrophilic polyampholytes. This complex behavior leads to the pentablock terpolymer forming a pH and temperature sensitive reversible hydrogel at very low polymer concentration.

     

The Effect of Hofmeister Salts on the LCST Transition of Poly(2‐oxazoline)s with Varying Hydrophilicity

The influence of Hofmeister salts was investigated on the cloud point of three poly(2‐oxazoline)s, namely poly(2‐ethyl‐2‐oxazoline) [PEtOx], poly(2‐n‐propyl‐2‐oxazoline) [PnPropOx], and poly(2‐isopropyl‐2‐oxazoline) [PiPropOx]. In addition, a comb polymer based on oligo‐2‐ethyl‐2‐oxazoline side chains and a methacrylate backbone (POEtOxMA) was included in this investigation. It was found that the ionic response of the poly(2‐oxazoline)s strongly depends on their hydrophilicity. The comb polymer POEtOxMA revealed a strikingly similar response to the salts as linear PEtOx even though the cloud points of the polymers in water differ. This indicates that the architecture does not significantly influence the effect of the Hofmeister ions, even though there is a difference in the absolute cloud point.

     

Simultaneous Detection and Removal of Mercury Ions in Aqueous Solution with Fluorescent Conjugated Polymer‐Based Sensor Ensemble

A water‐soluble, sulfur‐containing fluorescent conjugated polymer exhibits a visible fluorescence color change for detection of mercury in the presence of thymine. A new concept provides the design of a sensor ensemble using a simple combination method. This strategy avoids the need for complicated design and synthesis of a recognition group, eliminating the tedious synthetic efforts for the preparation of a sensor material.

     

Novel Photoactive Polymeric Multilayer Films Formed via Electrostatic Self‐Assembly

Summary: We demonstrate a novel approach for constructing photoactive multilayer films in which the aggregation of fluorescing molecules is effectively eliminated. In the films formed via a layer‐by‐layer electrostatic self‐assembly technique, the core‐shell amphiphilic copolymer, poly[(sodium 4‐styrenesulfonate)‐block‐vinylnaphthalene], was deposited. The isolated cores served as nanosized host sites for photoactive guest molecules (pyrene, perylene). The efficient energy transfer between polymeric chromophores and perylene molecules was observed.

AFM image of a nanostructured polymeric film prepared via a layer‐by‐layer technique and containing photoactive block copolymer poly[(sodium 4‐styrenesulfonate)‐block‐vinylnaphthalene]. Below is the representative height profile taken along the drawn line.     

Photoinduced Fusion of Micro‐Vesicles Self‐Assembled from Azobenzene‐Containing Amphiphilic Diblock Copolymers

Poly(N‐isopropylacrylamide)‐block‐poly{6‐[4‐(4‐methylphenyl‐azo) phenoxy] hexylacrylate} (PNIPAM‐b‐PAzoM) was synthesized by successive reversible addition‐fragmentation chain transfer (RAFT) polymerization. In H₂O/THF mixture, amphiphilic PNIPAM‐b‐PAzoM self‐assembles into giant micro‐vesicles. Upon irradiation of light at 365 nm, fusion of the vesicles was observed directly under an optical microscope. The real‐time fusion process is presented and the derivation is preliminarily due to the perturbation by the photoinduced trans‐to‐cis isomerization of azobenzene units in the vesicles.

     

Stable Aqueous Dispersion of PEGylated Nanoparticles by Polyelectrolyte Complex Formation

Stable aqueous dispersions of nanoparticles were prepared by polyelectrolyte complex formation between well‐defined poly(ethylene glycol)‐block‐poly(2‐acrylamido‐2‐methyl‐1‐propane sodium sulfonate) and poly(ethylene glycol)‐block‐poly[2‐(dimethylamino)ethyl methacrylate] diblock copolymers. Controlled synthesis of the copolymers was achieved by water‐based atom transfer radical polymerization (ATRP). The nanoparticles were characterized by a quite narrow and monomodal size distribution as evidenced by dynamic light scattering (DLS) and confirmed by atomic force microscopy (AFM) after solution casting and freeze‐drying.

     

Electromechanical Response of Nanostructured Polymer Systems with no Mechanical Pre‐Strain

A dielectric elastomer derived from a polystyrene‐block‐poly(ethylene‐co‐butylene)‐block‐polystyrene triblock copolymer swollen with a midblock‐selective solvent is reported to show promise as a nanostructured organic actuator requiring no pre‐strain. This might provide an attractive alternative to conventional acrylic, siloxane, and polyurethane elastomers since the electromechanical properties are composition‐tunable.

     

Micelles Formed by Cylindrical Brush‐Coil Block Copolymers

Summary: Amphiphilic cylindrical brush‐coil block copolymers consisting of a polystyrene coil and a cylindrical brush block with poly(acrylic acid) side chains are prepared by ATRP of t‐butylacrylate from a block comacroinitiator. Upon acidolysis of the poly(t‐butylacrylate), water‐soluble polymers were obtained that were observed to form micelles consisting of 4–5 block copolymers on average in aqueous solution. The star‐like nature of such micelles was clearly visualized by scanning force microscopy.

Schematic of coil‐cylindrical brush block copolymer PS‐b‐(PⁱBEMA‐g‐PAA), its AFM image clearly showing the main chain and the PAA corona of the cylindrical brush block.     

Combining Steric and Electrostatic Stabilization Using Hydrophilic MacroRAFT Agents in an Ab Initio Emulsion Polymerization of Styrene

Hydrophilic (co)polymers carrying a thiocarbonyl thio end group such as poly(dimethylaminoethyl methacrylate), poly(ethylene oxide), and poly(ethylene oxide)‐block‐poly(dimethylaminoethyl methacrylate) have been evaluated as precursors of stabilizers in batch ab initio emulsion polymerization of styrene under acidic conditions to form electrosterically stabilized polystyrene latex particles. As a mixture of P(DMAEMA/H⁺Cl⁻)‐RAFT and PEO‐RAFT failed to give satisfactory results, PEO‐RAFT was used as a control agent for the RAFT polymerization of DMAEMA, and the resulting block copolymer was successfully used in ab initio styrene emulsion polymerization.

     

Synthesis of Well‐Defined Rod‐Coil‐Rod Polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate via One‐Pot Anionic Polymerization

A rod‐coil‐rod block copolymer, polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate, of controlled molecular weight was synthesized quantitatively via living anionic polymerization using potassium naphthalenide in the presence of sodium tetraphenylborate. The use of K⁺ as the counterion for the polymerization of styrene, and Na⁺ (NaBPh₄) for the polymerization of isocyanate leads to the formation of a well‐controlled novel triblock copolymer.

     

Nanostructured Thermosetting Systems from Epoxidized Styrene Butadiene Block Copolymers

Summary: Nanostructured thermosetting materials were prepared by modification of an epoxy resin with 30 wt.‐% epoxidized polystyrene‐block‐polybutadiene copolymer (PS‐b‐PepB). The copolymer self‐assembles into a well‐defined hexagonal nanoordered structure, of around 30‐nm diameter, thus establishing its use as structure‐directing agent to generate nanostructured thermosetting materials. The study confirms pathways towards tailoring interactions between thermosetting matrices and immiscible block copolymers by using the concept of functionalization to build nanostructured polymer matrices.

Structure of diglycidyl ether of bisphenol‐A/4,4′‐methylenebis(3‐chloro 2,6‐diethylaniline) cured blend containing 30 wt.‐% PS‐b‐PepB61 block copolymer.     

A Green Approach for the Synthesis and Thiol‐ene Modification of Alkene Functio1489lized Poly(2‐oxazoline)s

The bulk polymerization of 2‐(dec‐9‐enyl)‐2‐oxazoline ( DecEnOx ), a fatty acid‐based monomer for the cationic ring‐opening polymerization, is reported. Furthermore, under optimal conditions, namely microwave heating at 100 °C, the bulk copolymerization with 2‐ethyl‐2‐oxazoline yielded well‐defined copolymers. Due to its pendant alkene groups DecEnOx ‐based polymers possess the potential to be modified in efficient thiol‐ene reactions. The functionalization with thiols, e.g., dodecanethiol and 2,3,4,6‐tetra‐O‐acetyl‐1‐thio‐β‐D ‐glycopyranose in “green” solvents is demonstrated.

     

Synthesis and Surface Morphology of Tetraaniline‐block‐Poly(L‐lactate) Diblock Oligomers

Summary: Tetraaniline‐block‐poly(L ‐lactide) diblock oligomers are synthesized via ring‐opening polymerization. The diblock oligomers cast from an L ‐lactide selective solvent (chloroform) show spherical aggregates for the leucoemeraldine state, and ring‐like structures that are composed of much smaller spherical aggregates for the emeraldine state. The formation mechanisms of the two different surface morphologies are discussed in detail.

Surface morphology changes induced by oxidation of the aniline segment of tetraaniline‐block‐poly(L ‐lactate) and drying effects.     

Immobilization of Candida antarctica lipase B on Polystyrene Nanoparticles

Polystyrene (PS) nanoparticles were prepared via a nanoprecipitation process. The influence of the pH of the buffer solution used during the immobilization process on the loading of Candida antarctica lipase B (Cal‐B) and on the hydrolytic activity (hydrolysis of p‐nitrophenyl acetate) of the immobilized Cal‐B was studied. The pH of the buffer solution has no influence on enzyme loading, while immobilized enzyme activity is very dependent on the pH of adsorption. Cal‐B immobilized on PS nanoparticles in buffer solution pH 6.8 performed higher hydrolytic activity than crude enzyme powder and Novozyme 435.

     

Living Cationic Polymerizations Utilizing an Automated Synthesizer: High‐Throughput Synthesis of Polyoxazolines

Living cationic ring‐opening polymerizations of 2‐ethyl‐2‐oxazoline and purification of the resulting polymers were performed utilizing an automated synthesizer. Eight polymers (500 mg scale) as well as 40 polymers (150 mg scale) were synthesized in parallel to investigate the reproducibility and the living character of the polymerizations. The poly(2‐ethyl‐2‐oxazoline)s obtained such were characterized by means of ¹H NMR spectroscopy, MALDI‐TOF mass spectrometry and online gel permeation chromatography.

     

Aggregation Behavior of Homo‐PS/PS‐b‐P2VP Blends at the Air/Water Interface

The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.

     

Synthesis and Characterization of β‐Cyclodextrin Based Functional Monomers and its Copolymers with N‐isopropylacrylamide

Two novel monovinyl β‐cyclodextrin (β‐CD) monomers are synthesized. Their chemical compositions are characterized by means of element analysis, NMR and FT‐IR spectroscopy. The results show that the synthesis techniques used are convenient and efficient. Using N‐isopropylacrylamide as a comonomer, two novel linear copolymers can also be synthesized.

Synthesis route of monovinyl β‐CD monomers.     

Nanoporous Network Channels from Self‐Assembled Triblock Copolymer Supramolecules

Supramolecular complexes of a poly(tert‐butoxystyrene)‐block‐polystyrene‐block‐poly(4‐vinylpyridine) triblock copolymers and less than stoichiometric amounts of pentadecylphenol (PDP) are shown to self‐assemble into a core–shell gyroid morphology with the core channels formed by the hydrogen‐bonded P4VP(PDP)complexes. After structure formation, PDP was removed using a simple washing procedure, resulting in well‐ordered nanoporous films that were used as templates for nickel plating.

     

Plasma‐Initiated Controlled/Living Radical Polymerization of Methyl Methacrylate in the Presence of 2‐Cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN)

Summary: Plasma‐initiated controlled/living radical polymerization of methyl methacrylate (MMA) was carried out in the presence of 2‐cyanoprop‐2‐yl 1‐dithionaphthalate. Well‐defined poly(methyl methacrylate) (PMMA), with a narrow polydispersity, could be synthesized. The polymerization is proposed to occur via a RAFT mechanism. Chain‐extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA‐block‐PSt copolymer.

Dependence of ln([M]₀/[M]) on post‐polymerization time (above), and \overline M _{\rm n} and PDI against conversion (below) for plasma initiated RAFT polymerization of MMA at 25 °C.