A Novel Access to Phenylnickel‐phosphinophenolate Trimethylphosphine Complexes as Single Component Oligo‐ or Polymerization Catalysts

A novel access to phenylnickel‐2‐phosphinophenolate trimethylphosphine complexes, which unlike the “P‐ylide method” is not limited to P‐arylphosphino derivatives, consists of the reaction of 2‐phosphinophenols and diphenylnickel‐bis(trimethylphosphine), easily prepared from phenyllithium and NiCl₂(PMe₃)₂. [PhNi(2‐Ph₂PC₆H₄O)(PMe₃)], [PhNi(2‐cHex₂PC₆H₄O)(PMe₃)] and [PhNi(2‐Ph₂P‐4‐MeOC₆H₃O)(PMe₃)], the latter two with more basic dialkylphosphino or 4‐methoxy substituents, were synthesized and tested in the oligomerization of ethylene. The molecular structure of [PhNi(2‐cHex₂PC₆H₄O)(PMe₃)] in the crystal is reported.     

Novel Disaccharides Containing 3-Deoxy-D-Manno-2-Octulosonic Acid (KDO) and Lipid a Subunit Analogs

Abstract

3-Deoxy-D-manno-2-octulosonic acid (KDO)₁ is a prominent constituent of bacterial lipopolysaccharides (LPS),₂ and recently it has been demonstrated _3,4 that the KDO part in the core region of LPS is α-ketosidically linked to 0-6′ of the o-glucosamine-disaccharide backbone of lipid A. Although the portion, including KDO, has been suggested_5,6 to be necessary for expression of antitumor and interleukin 1 (IL 1)-induction activities of LPS, the disticnt biological roles of KDO in LPS are still obscure.     

β‐Turn Analogues in Model αβ‐Hybrid Peptides: Structural Characterization of Peptides Containing β2,2Ac6c and β3,3Ac6c Residues

The effect of gem‐dialkyl substituents on the backbone conformations of β‐amino acid residues in peptides has been investigated by using four model peptides: Boc‐Xxx‐β^2,2Ac₆c(1‐aminomethylcyclohexanecarboxylic acid)‐NHMe (Xxx=Leu ( 1 ), Phe ( 2 ); Boc=tert‐butyloxycarbonyl) and Boc‐Xxx‐β^3,3Ac₆c(1‐aminocyclohexaneacetic acid)‐NHMe (Xxx=Leu ( 3 ), Phe ( 4 )). Tetrasubstituted carbon atoms restrict the ranges of stereochemically allowed conformations about flanking single bonds. The crystal structure of Boc‐Leu‐β^2,2Ac₆c‐NHMe ( 1 ) established a C₁₁ hydrogen‐bonded turn in the αβ‐hybrid sequence. The observed torsion angles (α(?≈?60°, ψ≈?30°), β(?≈?90°, θ≈60°, ψ≈?90°)) corresponded to a C₁₁ helical turn, which was a backbone‐expanded analogue of the type III β turn in αα sequences. The crystal structure of the peptide Boc‐Phe‐β^3,3Ac₆c‐NHMe ( 4 ) established a C₁₁ hydrogen‐bonded turn with distinctly different backbone torsion angles (α(?≈?60°, ψ≈120°), β(?≈60°, θ≈60°, ψ≈?60°)), which corresponded to a backbone‐expanded analogue of the type II β turn observed in αα sequences. In peptide 4 , the two molecules in the asymmetric unit adopted backbone torsion angles of opposite signs. In one of the molecules, the Phe residue adopted an unfavorable backbone conformation, with the energetic penalty being offset by a favorable aromatic interaction between proximal molecules in the crystal. NMR spectroscopy studies provided evidence for the maintenance of folded structures in solution in these αβ‐hybrid sequences.     

Enantioselective Allylic Alkylation Catalyzed by Novel C2‐Symmetric Bisphosphinites

In this article, we present our results concerning new C₂‐symmetric bisphosphinites with a (1R,2R)‐1,2‐bis([1,1′: 3′,1″‐terphenyl]‐5′‐yl)ethane backbone. For the given chirality of the backbone, derivatives with aromatic and aliphatic substituents at the donor P‐atoms were synthesized with moderate yields in a straightforward manner. These compounds were evaluated in the Pd⁰‐catalyzed enantioselective allylic alkylations (up to 67% ee).     

Effect of ligand backbone substituents of nickel α‐diimine complexes on livingness/controllability of olefin polymerization: Competition between monomer isomerization and propagation

Four α‐diimine nickel complexes [(Ar? N?C(R)? C(R)?N? Ar)NiBr₂; R?H, CH₃, cyclohexane‐1,2‐diyl, naphthalene‐1,8‐diyl, Ar?2,6‐i‐Pr₂‐C₆H₃‐) were investigated in propene and hex‐1‐ene polymerization to identify the limits of backbone substituent R size needed to provide living/controlled α‐olefins polymerization by the sufficient suppression of β–H elimination transfer. Propagation kinetics measurements, molar mass on monomer conversion dependencies and reinitiation tests were used to evaluate the livingness of hex‐1‐ene polymerization. Interestingly, living/controlled hex‐1‐ene polymerization was observed in the case of all diimine derivatives including the one bearing only hydrogen atom in backbone positions. Unexpectedly, in the case of catalysts bearing H and CH₃ backbone substituents, we observed the unusual isomerization of hex‐1‐ene into internal hexenes in parallel with its polymerization. Nevertheless, by subtracting the amount of monomer consumed in isomerization side reaction, polymerization still keeps the features of living/controlled process. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3193–3202     

Probing the Rotational Dynamics of meso‐(2‐Substituted)aryl Substituents in A2B‐Type Subporphyrins

A₂B‐type B‐methoxy subporphyrins 3 a – g and B‐phenyl subporphyrins 7 a – c , e , g bearing meso‐(2‐substituted)aryl substituents are synthesized, and their rotational dynamics are examined through variable‐temperature (VT) ¹H NMR spectroscopy. In these subporphyrins, the rotation of meso‐aryl substituents is hindered by a rationally installed 2‐substituent. The rotational barriers determined are considerably smaller than those reported previously for porphyrins. Comparison of the rotation activation parameters reveals a variable contribution of ΔH^≠ and ΔS^≠ in ΔG^≠. 2‐Methyl and 2‐ethyl groups of the meso‐aryl substituents in subporphyrins 3 e , 3 f , and 7 e induce larger rotational barriers than 2‐alkoxyl substituents. The rotational barriers of 3 g and 7 g are reduced by the presence of the 4‐dibenzylamino group owing to its ability to stabilize the coplanar rotation transition state electronically. The smaller rotational barriers found for B‐phenyl subporphyrins than for B‐methoxy subporphyrins indicate a negligible contribution of S_N1‐type heterolysis in the rotation of meso‐aryl substituents.     

Heat capacities of crystalline tetraalkylammonium salts

The behavior of crystalline tetraalkylammonium salts at 290–350 K was studied by differential scanning calorimetry. For tetraethyl- and tetrabutylammonium bromides (Et₄NBr and Bu₄NBr), the experimental heat capacities agreed well with the literature values. For tetrahexyl-, tetraheptyl-, and tetraoctylam-monium bromides (Hex₄NBr, Hep₄NBr, and Oct₄NBr), phase transitions were found between crystal modifications whose characteristic temperatures depended significantly on the size of the cation. Empirical equations for the temperature dependences of the heat capacities of the salts within the ranges of homogeneous equilibrium phases were derived.     

Chemical synthesis of Helicobacter pylori lipopolysaccharide partial structures and their selective proinflammatory responses

Helicobacter pylori is a common cause of gastroduodenal inflammatory diseases such as chronic gastritis and peptic ulcers and also an important factor in gastric carcinogenesis. Recent reports have demonstrated that bacterial inflammatory processes, such as stimulation with H. pylori lipopolysaccharide (LPS), initiate atherosclerosis. To establish the structures responsible for the inflammatory response of H. pylori LPS, we synthesized various kinds of lipid A structures (i.e., triacylated lipid A and Kdo‐lipid A compounds), with or without the ethanolamine group at the 1‐phosphate moiety, by a new divergent synthetic route. Stereoselective α‐glycosylation of Kdo N‐phenyltrifluoroacetimidate was achieved by use of microfluidic methods. None of the lipid A and Kdo‐lipid A compounds were a strong inducer of IL‐1β, IL‐6, or IL‐8, suggesting that H. pylori LPS is unable to induce acute inflammation. In fact, the lipid A and Kdo‐lipid A compounds showed antagonistic activity against cytokine induction by E. coli LPS, except for the lipid A compound with the ethanolamine group, which showed very weak agonistic activity. On the other hand, these H. pylori LPS partial structures showed potent IL‐18‐ and IL‐12‐inducing activities. IL‐18 has been shown to correlate with chronic inflammation, so H. pylori LPS might be implicated in the chronic inflammatory responses induced by H. pylori. These results also indicated that H. pylori LPS can modulate the immune response: NF‐κB activation through hTLR4/MD‐2 was suppressed, whereas production of IL‐18 and IL‐12 was promoted.     

Synthetic Utility of Stable Phosphanylcarbenes: Synthesis and Crystal Structure of an α‐(Lithiomethylene)phosphorane

The first crystallographically characterized phosphonium yldiide 2 was obtained in a simple reaction by addition of n‐butyllithium to the stable phosphanyl(silyl)carbene 1 . R=cHex₂N.     

Copper‐Complex‐Catalyzed Asymmetric Aerobic Oxidative Cross‐Coupling of 2‐Naphthols: Enantioselective Synthesis of 3,3′‐Substituted C1‐Symmetric BINOLs

A novel chiral 1,5‐N,N‐bidentate ligand based on a spirocyclic pyrrolidine oxazoline backbone was designed and prepared, and it coordinates CuBr in situ to form an unprecedented catalyst that enables efficient oxidative cross‐coupling of 2‐naphthols. Air serves as an external oxidant and generates a series of C₁‐symmetric chiral BINOL derivatives with high enantioselectivity (up to 99 % ee) and good yield (up to 87 %). This approach is tolerant of a broader substrates scope, particularly substrates bearing various 3‐ and 3′‐substituents. A preliminary investigation using one of the obtained C₁‐symmetric BINOL products was used as an organocatalyst, exhibiting better enantioselectivity than the previously reported organocatalyst, for the asymmetric α‐alkylation of amino esters.     

Synthesis and CD Spectra of Fluoro‐ and Hydroxy‐Substituted β‐Peptides

β‐Amino acids 1 – 3 with OH and F substituents in the α‐position have been prepared (Scheme) from the natural (S)‐α‐amino acids alanine, valine, and leucine, and incorporated into β‐hexa‐ and β‐heptapeptides 4 – 12 . The peptide syntheses were performed according to a conventional solution strategy (Boc/Bn protection) with fragment coupling. The new β‐peptides with (series a ) and without (series b ) terminal protection were isolated in HPLC‐pure form and characterized by NMR spectroscopy and MALDI mass spectrometry. The chemical properties as well as the patterns of the CD spectra (Figs. 3–5) depend upon constitution (OH, F, F₂ substitution) and configuration (l or u) of the amino acid residues, upon the total number of OH and F substituents in the peptide chain, and upon the solvent used (H₂O, MeOH, CF₃CH₂OH, (CF₃)₂CHOH). No reliable clues regarding the structures can be obtained from these CD spectra. Only a full NMR analysis will be able to answer the questions: a) with which known secondary structures (Figs. 1 and 2) of β‐peptides are the OH and F derivatives compatible? b) Are new secondary structures enforced by the polar and/or H‐bonding backbone substituents? Furthermore, the β‐peptides described here will enable us to study changes in chemical, enzymatic, and metabolic stability, and in physiological properties caused by the heteroatoms.     

Amidoverbindungen von Aluminium und Gallium

Amido Derivatives of Aluminium and Gallium The treatment of GaCl₃ with LiN^cHex₂ (^cHex = C₆H₁₁) in the molar ratio 1 : 3 or 1 : 4 in THF at 20 °C gives the gallium amide Ga(N^cHex₂)₃ ( 1 ) which is monomer in solution and the solid state. Under similar conditions the reaction of AlCl₃ and GaCl₃ with LiN(CH₂Ph)₂ in the molar ration of 1 : 4 leads to the amido metalates [Li(THF)₄][M{N(CH₂Ph)₂}₄] (M = Al ( 2 ), Ga ( 3 )). 1 – 3 have been characterized by NMR, IR and MS techniques as well as by X‐Ray analyses. According to them 2 and 3 consist of separate ions [Li(THF)₄]⁺ and [M{N(CH₂Ph)₃}₄]^–. The reason for the monomeric character of 1 is the sterical demand of the N^cHex₂ group.     

Probing the Subunit-Subunit Interaction of the Tetramer of E. coli KDO8P Synthase by Electrospray Ionization Mass Spectrometry

Escherichia coli 3-Deoxy-D-manno-octulosonate 8-phosphate (KDO8P) synthase catalyzes the condensation reaction between D-arabinose 5-phosphate (A5P) and phosphoenolpyruvate (PEP) to form KDO8P and inorganic phosphate (Pi). This enzyme exists as a tetramer in solution, which is important for catalysis. Two different states of the enzyme were obtained: i) PEP-bound and ii) PEP-unbound. The effect of the substrates and products on the overall structure of KDO8P synthase in both PEP-bound and unbound states was examined using electrospray ionization mass spectrometry. The analysis of our data showed that the complexes of the PEP-unbound enzyme with PEP (or Pi) favored the formation of monomers, while the complexes with A5P (or KDO8P) mainly favored dimers. The PEP-bound enzyme was found to exist in the monomer and dimer with a small amount of the tetramer, whereas the PEP-unbound form primarily exists in the monomer and dimer, and no tetramer was observed, suggesting that the bound PEP have a role in stabilization of the tetrameric structure. Taken together, the results imply that the addition of the substrates or products to the unbound enzyme may alter the subunit-subunit interactions and/or conformational change of the protein at the active site, and this study also demonstrates that the electrospray ionization mass spectrometric method may be a powerful tool in probing the subunit-subunit interactions and/or conformational change of multi-subunit protein upon binding to ligand.     

Chemoselectivity in the Reaction of 2‐Diazo‐3‐oxo‐3‐phenylpropanal with Aldehydes and Ketones

The chemoselectivity in the reaction of 2‐diazo‐3‐oxo‐3‐phenylpropanal ( 1 ) with aldehydes and ketones in the presence of Et₃N was investigated. The results indicate that 1 reacts with aromatic aldehydes with weak electron‐donating substituents and cyclic ketones under formation of 6‐phenyl‐4H‐1,3‐dioxin‐4‐one derivatives. However, it reacts with aromatic aldehydes with electron‐withdrawing substituents to yield 1,3‐diaryl‐3‐hydroxypropan‐1‐ones, accompanied by chalcone derivatives in some cases. It did not react with linear ketones, aliphatic aldehydes, and aromatic aldehydes with strong electron‐donating substituents. A mechanism for the formation of 1,3‐diaryl‐3‐hydroxypropan‐1‐ones and chalcone derivatives is proposed. We also tried to react 1 with other unsaturated compounds, including various olefins and nitriles, and cumulated unsaturated compounds, such as N,N′‐dialkylcarbodiimines, phenyl isocyanate, isothiocyanate, and CS₂. Only with N,N′‐dialkylcarbodiimines, the expected cycloaddition took place.     

Synthesis of Structurally Diversified Benzo[c]chromene Derivatives under (An)aerobic Conditions Catalyzed by CuI

2‐Bromobenzoic acids underwent an α‐arylation with cyclohexane‐1,3‐diones to give 1H‐benzo[c]chromene‐1,6(2H)‐diones under Ar atmosphere catalyzed by CuI/l ‐proline in the presence of Cs₂CO₃. The subsequent regioselective oxidation took place under O₂ balloon automatically based on the substituents for the construction of structurally diversified benzo[c]coumarin derivatives.     

Syntheses of L‐Glutamic Acid Analogues for Neuroexcitatory Activity Studies

Starting from D–serine, (2S,3S)‐, (2S,3R)‐substituted‐L‐glutamic acids were prepared via Claisen rearrangement methodology. A variety of the substituents can be introduced at the C‐3 of the L‐glutamic acid backbone.     

Inositolphosphoglycan Mediators: An Effective Synthesis of the Conserved Linear GPI Anchor Structure*

An effective new preparative synthesis of the conserved linear pseudopentasaccharide structure of the GPI anchors and of the full GPI structure has been carried out that has permitted obtaining both molecules in sufficient quantities as to perform further structural and biologic studies. The synthesis involves a 3+2 block synthesis strategy in which a conveniently protected Man α(1→4) GlcN₃ α(1→6) myo‐Ins building block, previously used in the synthesis of inositolphosphoglycan (IPG) mediators, is glycosylated with a protected Man α(1→2) Man trichloroacetimidate.     

Click Functionalization of a Dibenzocyclooctyne‐Containing Conjugated Polyimine

A conjugated poly(phenyl‐co‐dibenzocyclooctyne) Schiff‐base polymer, prepared through polycondensation of dibenzocyclooctyne bisamine (DIBO‐(NH₂)₂) with bis(hexadecyloxy)phenyldialdehyde, is reported. The resulting polymer, which has a high molecular weight (M_n>30 kDa, M_w>60 kDa), undergoes efficient strain‐promoted alkyne–azide cycloaddition reactions with a series of azides. This enables quantitative modification of each repeat unit within the polymer backbone and the rapid synthesis of a conjugated polymer library with widely different substituents but a consistent degree of polymerization (DP). Kinetic studies show a second‐order reaction rate constant that is consistent with monomeric dibenzocyclooctynes. Grafting with azide‐terminated polystyrene and polyethylene glycol monomethyl ether chains of varying molecular weight resulted in the efficient syntheses of a series of graft copolymers with a conjugated backbone and maximal graft density.     

Substituent effects on the gas‐phase fragmentation reactions of protonated peptides containing benzylamine‐derivatized lysyl residues

Motivated by the need for chemical strategies designed to tune peptide fragmentation to selective cleavage reactions, benzyl ring substituent influence on the relative formation of carbocation elimination (CCE) products from peptides with benzylamine‐derivatized lysyl residues has been examined using collision‐induced dissociation (CID) tandem mass spectrometry. Unsubstituted benzylamine‐derivatized peptides yield a mixture of products derived from amide backbone cleavage and CCE. The latter involves side‐chain cleavage of the derivatized lysyl residue to form a benzylic carbocation [C₇H₇]⁺ and an intact peptide product ion [(MH_n)ⁿ⁺ – (C₇H₇)⁺]^(n‐1)+. The CCE pathway is contingent upon protonation of the secondary ε‐amino group (N_ε) of the derivatized lysyl residue. Using the Hammett methodology to evaluate the electronic contributions of benzyl ring substituents on chemical reactivity, a direct correlation was observed between changes in the CCE product ion intensity ratios (relative to backbone fragmentation) and the Hammett substituent constants, σ, of the corresponding substituents. There was no correlation between the substituent‐influenced gas‐phase proton affinity of N_ε and the relative ratios of CCE product ions. However, a strong correlation was observed between the π orbital interaction energies (ΔE_int) of the eliminated benzylic carbocation and the logarithm of the relative ratios, indicating the predominant factor in the CCE pathway is the substituent effect on the level of hyperconjugation and resonance stability of the eliminated benzylic carbocation. This work effectively demonstrates the applicability of σ (and ΔE_int) as substituent selection parameters for the design of benzyl‐based peptide‐reactive reagents which tune CCE product formation as desired for specific applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesen von Verbindungen mit M–N‐Bindungen (M = Li,Ga, In)

Syntheses of Compounds with M–N Bonds (M = Li, Ga, In) The adducts [GaCl₃(HNⁱPr₂)] ( 1 ) and [InCl₃{HN(CH₂Ph)₂}₂] ( 2 ) can be obtained by the reactions of the corresponding metal(III) halides with the amines. The In amide In(N^cHex₂)₃ ( 3 ) can be formed by treatment of InCl₃ with three equivalents of LiN^cHex₂. Reaction with four equivalents of LiN^cHex₂ leads to the same product. However, the treatment of InCl₃ with four equivalents of LiN(CH₂Ph)₂ gives the desired metalate [Li(THF)₄][In{N(CH₂Ph)₂}₄] ( 4 ). From the corresponding reaction of InCl₃ with LiNⁱPr₂ no In‐containing product could be identified. Instead, the aggregate of LiCl with three units of LiNⁱPr₂, [Li₄(NⁱPr₂)₃(THF)₄Cl] ( 5 ), was isolated. 1 – 4 were characterized by NMR, IR and MS techniques as well as by X‐ray structure determinations. According to them, 1 possesses a tetrahedrally coordinated Ga atom, at which two units of 1 are connected by hydrogen bridges to centrosymmetrical dimers. The In atoms in 2 have a trigonal‐bipyramidal coordination sphere; the amine molecules occupy the apical positions. The central metal atom in 3 and the anion of 4 exhibit trigonal‐planar and distorted tetrahedral environments, respectively. The novel structural motif in 5 is the Cl^– ion, only partly surrounded by Li⁺ ions in a strongly distorted trigonal‐bipyramidal fashion. The dominating angle amounts to 165.2(2)°.