Guest‐Directed Supramolecular Architectures of {W36} Polyoxometalate Crowns

The {W₃₆} isopolyoxotungstate cluster provides a stable inorganic molecular platform for the binding of inorganic and organic guest molecules. This is achieved by a binding pocket formed by six terminal oxo ligands located in the central cavity of the all‐inorganic cation binding host. Previously it was shown that the cluster can specifically bind primary amines and importantly, functionalized diamines through a combination of electrostatic and hydrogen bonding interactions. Here we transform this assembly strategy to utilize the binding of long‐chain alkyldiammonium guest cations to physically define the supramolecular structure of the clusters with respect to each other and demonstrate the structure direction as a function of alkyl chain length. The systematic variation of the chain length gives access to five supramolecular assemblies which were all fully characterized using single crystal XRD, TGA, ¹H NMR, and elemental analysis. In compound 1 , diprotonated 1,8‐diaminooctane molecules link the {W₃₆} clusters into infinite 1D zigzag chains, whereas compounds 2 and 3 feature trimeric {W₃₆} assemblies directly connected through protonated 1,9‐diaminononane ( 2 ) or 1,10‐diaminodecane ( 3 ) linkers . Compound 4 contains dumb‐bell shaped dimeric units as a result of direct center‐to‐center linkages between the {W₃₆} clusters formed by protonated 1,12‐diaminododecane. In compound 5 , triply protonated bis(hexamethylene)triamine was employed to obtain linear 1D chains of directly connected {W₃₆} cluster units.     

α-Substituierte phosphonate—36 : α-Phosphonoenamine und acylphosphonate durch horner-olefinierung

Phosphonoenamines are formed by Horner-Olefination of N-substituted aminomethane-bis-phosphonic acid esters. These exist, depending on N-substitution, carbonyl compound, and condition of the reaction as pure E- or Z-isomeres resp. as E,Z-mixture. The stereochemistry unambiguously could be derived from the ¹H- resp. ¹³C-NMR-spectra. Mild hydrolysis of the phosphonoenamines yields acylphosphonates; ³¹P-NMR-data shows, that these exist as a mixture of keto-enol-form. The enol-form of this products could be isolated in crystalline form. Phenylacetylphosphonate, unambiguously synthesized from phenylacetylchloride and triethylphosphite also exist as a mixture of the keto-enol-form.     

Synthesis,crystal structure,and electronic structure of Li2PbSiS4: a quaternary thiosilicate with a compressed chalcopyrite‐like structure

The new quaternary thiosilicate, Li₂PbSiS₄ (dilithium lead silicon tetrasulfide), was prepared in an evacuated fused‐silica tube via high‐temperature, solid‐state synthesis at 800 °C, followed by slow cooling. The crystal structure was solved and refined using single‐crystal X‐ray diffraction data. By strict definition, the title compound crystallizes in the stannite structure type; however, this type of structure can also be described as a compressed chalcopyrite‐like structure. The Li⁺ cation lies on a crystallographic fourfold rotoinversion axis, while the Pb²⁺ and Si⁴⁺ cations reside at the intersection of the fourfold rotoinversion axis with a twofold axis and a mirror plane. The Li⁺ and Si⁴⁺ cations in this structure are tetrahedrally coordinated, while the larger Pb²⁺ cation adopts a distorted eight‐coordinate dodecahedral coordination. These units join together via corner‐ and edge‐sharing to create a dense, three‐dimensional structure. Powder X‐ray diffraction indicates that the title compound is the major phase of the reaction product. Electronic structure calculations, performed using the full potential linearized augmented plane wave method within density functional theory (DFT), indicate that Li₂PbSiS₄ is a semiconductor with an indirect bandgap of 2.22 eV, which compares well with the measured optical bandgap of 2.51 eV. The noncentrosymmetric crystal structure and relatively wide bandgap designate this compound to be of interest for IR nonlinear optics.     

Formation, isolation and characterization of an AB-biaryl atropisomer of oritavancin

Oritavancin is a semi-synthetic glycopeptide antibiotic which is structurally related to vancomycin. When oritavancin bisphosphate is dried in vacuo with heat, a new compound forms. This new compound is stable only in the solid state and reverts to oritavancin in solution. Highly enriched samples of this compound were obtained by preparative HPLC and the structure of this compound was elucidated by using one and two-dimensional (¹H and ¹³C) NMR spectroscopy in conjunction with computer-assisted molecular modeling. It has been determined that oritavancin adopts a conformation similar to that of vancomycin in solution, while the new compound is the unnatural R-AB-biaryl atropisomer of oritavancin. This is the first observation and isolation of an AB-biaryl atropisomer in an intact member of the vancomycin family of glycopeptide antibiotics.     

Cyclische Phosphidostannat(III)-Anionen [Sn12P24]36– in Sr3[Sn2P4]

Cyclic Phosphidostannate(III) Anions [Sn₁₂P₂₄]^36– in Sr₃[Sn₂P₄] The metallic lustrous, air sensitive compound Sr₃[Sn₂P₄] was prepared from melts of mixtures of the elements. Sr₃[Sn₂P₄] crystallizes in the orthorhombic system, space group Cmca (a = 2510,4(9), b = 1259,3(6), c = 1869,3(8), Z = 24). In the anionic partial structure six moieties [Sn₂P₆] isostructural to Si₂Cl₆ are linked by each four common P-ligands forming cyclic units [Sn₁₂P₂₄]^36–. The strontium cations are octahedrally coordinated by P. The arrangement can be described as a distorted cubic close packing of P^3– in which in an ordered manner ³/₄ of the octahedral vacancies are occupied by Sr²⁺ and ¹/₄ by Sn₂-dumbbells.     

Preparation and Crystal Structure of Guanidinium Cyclododecaphosphate Hexahydrate: [C(NH2)3]12P12O36 · 6H2O

The title compound was prepared by ion exchange from the potassium salt, K₁₂P₁₂O₃₆ · 19/2H₂O. It represents a second new structural type of [P₁₂O₃₆]^12? ring anions. This sparingly water soluble salt is hexagonal, space group P6₃, with Z = 2 and the cell dimensions: a = 15.904(7), c = 16.67(2) Å. The crystal structure was solved by direct methods and refined to a final R value of 0.050. The ring anion is located around the threefold axis and hence has a threefold symmetry. The stacking of the rings creates large channels, parallel to the c direction, in which the guanidinium groups and the water molecules are located. Three of the six independent guanidinium groups are located on the threefold axes. The cohesion of the structure is performed by the numerous H-bonds generated by the organic cations and the water molecules.     

Design,synthesis and computational evaluation of a novel intermediate salt of N-cyclohexyl-N-(cyclohexylcarbamoyl)-4-(trifluoromethyl) benzamide as potential potassium channel blocker in epileptic paroxysmal seizures

The narrow therapeutic range and limited pharmacokinetics of available Antiepileptic drugs (AEDs) have raised serious concerns in the proper management of epilepsy. To overcome this, the present study attempts to identify a candidate molecule targeting voltage gated potassium channels anticipated to have superior pharmacological than existing potassium channel blockers. The compound was synthesized by reacting (S)-(+)-2,3-dihydro-1H-pyrrolo[2,1-c][1,4] benzodiazepine5,11(10H,11aH)-dione with 4-(Trifluoromethyl) benzoic acid (C₈H₅F₃O₂) in DMF and N,N′-dicyclohexylcarbodiimide (DCC) which lead to the formation of an intermediate salt of N-cyclohexyl-N-(cyclohexylcarbamoyl)-4-(trifluoromethyl)benzamide with a perfect crystalline structure. The structure of the compound was characterized by FTIR, ¹H NMR and ¹³C NMR analysis. The crystal structure is confirmed by single crystal X-ray diffraction analysis. The Structure-Activity Relationship (SAR) studies revealed that substituent of fluoro or trifluoromethyl moiety into the compound had a great effect on the biological activity in comparison to clinically used drugs. Employing computational approaches the compound was further tested for its affinity against potassium protein structure by molecular docking in addition, bioactivity and ADMET properties were predicted through computer aided programs.     

Synthese und Strukturuntersuchungen von Ba2H[α-FeO4W12O36] · 26 H2O

Synthesis and Structure Studies of Ba₂H[α-FeO₄W₁₂O₃₆] · 26 H₂O The heteropolyanion compound Ba₂H[α-FeO₄W₁₂O₃₆] · 26 H₂O (I) crystallizes in the tetragonal space group P4 n2 with the lattice parameters a = 12.398(6), c = 18.721(6) Å; Z = 2; D_x = 4.128 g · cm^?3. The structure was solved on a twinned crystal from 1029 observed reflections and refined to an index R of 7.6%. The calculations were done by means of a modified ORFLS-programme by Eitel and Bärnighausen. The heteropolyanion [α-FeO₄W₁₂O₃₆]^5? has the well known α-Keggin structure. The average distance of the four central oxygen atoms to the Fe^III position (0, 0, 0) is 1.84 Å. The angles ? O? Fe? O are 112.3° (4X) and 103.9 (2X), respectively, which leads to an disphenoidal distortion of the FeO₄ tetrahedron. The powder and single crystal ESR spectra of I show the anisotropy of the Fe^III fine structure transition 1/2 ? ?1/2. The Mößbauer spectra confirm the tetragonal distortion of the central FeO₄ tetrahedron (quadrupole splitting Δ ≈ 0.50 mm · s^?1).     

Synthesis,characterization and crystal structure of 6-ferrocenyl-2,4-dihydroxy-2,4-di(pyridine-2-yl) cyclohexanecarbonyl ferrocene

A novel ferrocene derivative which has four stereo centers has been prepared by an efficient synthetic method based on a solvent-free reaction. The compound was characterized by IR, ¹H-NMR, ¹³C-NMR, ESI-MS, single crystal X-ray diffraction and TG analysis. The crystal structure shows that the cyclohexyl group is in a chair conformation and the two ferrocenyl moieties are nonequivalent. There are two intramolecular hydrogen bonds and two intermolecular hydrogen bonds in the compound, which involve two hydroxyls and generate a dimer, respectively. The electrochemical properties of the compound are discussed.     

Thermodynamic Properties of Hydrofullerene C60H36 from 5 to 340 K

The temperature dependence of the molar heat capacity (C⁰ _p) of hydrofullerene C₆₀H₃₆ between 5 and 340 K was determined by adiabatic vacuum calorimetry with an error of about 0.2%. The experimental data were used for the calculation of the thermodynamic functions of the compound in the range 0 to340 K. It was found that at T=298.15 K and p=101.325 kPa C⁰ _p (298.15)=690.0 J K⁻¹ mol⁻¹,H^o(298.15)−H^o(0)= 84.94 kJ mol⁻¹,S^o(298.15)=506.8 J K⁻¹ mol⁻¹, G^o(298.15)−H^o(0)= −66.17 kJ mol⁻¹. The standard entropy of formation of hydrofullerene C₆₀H₃₆ and the entropy of reaction of its formation by hydrogenation of fullerene C₆₀ with hydrogen were estimated and at T=298.15 K they were Δ_fS^o= −2188.4 J K⁻¹ mol⁻¹ and Δ_rS^o= −2270.5 J K⁻¹mol⁻¹, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Röntgenstrukturanalytische Untersuchungen von Diazadiphosphetidinen

X‐Ray Structure Analysis of Diazadiphosphetidines Various diazadiphosphetidines are synthesized by a modified Kirsanov reaction and subjected to X‐ray crystal structure analysis, the results of which show steric hindrance in the cyclohexyl‐substituted compound 4 . A comparison of its structure to that of the fluorine compound 12 shows that the steric hindrance occurs only in the case of chlorophosphoranes. During the Kirsanov reaction with aliphatic amines branched at the α‐position, a further reaction is observed if the amine is added in excess. The phosphonium salt 11 is characterized by ¹H‐, ¹³C‐ and ³¹P‐NMR‐spectra, FAB‐mass spectrum, elemental analysis and X‐ray crystal structure analysis.     

具有纳米尺寸的四聚四硫富瓦烯大环冠醚的合成

以二(碘乙基)醚和2,3-二氰乙硫基四硫富瓦烯衍生物作为起始原料, 采用腈乙基保护与脱保护技术, 通过多步反应以较好的收率合成了两个纳米结构的大环四硫富瓦烯冠醚5a～5b. 通过循环伏安法(CV)研究了化合物4b和5b的电化学性质, 并用¹H NMR谱研究了5b与[60]富勒烯之间的相互作用. 结果表明: 5b存在环结构效应, 与[60]富勒烯有一定程度的电荷转移相互作用.     

含能配合物[Zn(DAT)6](ClO4)2(DAT＝1,5-二氨基四唑)的合成、晶体结构及性质

采用直接法合成了新型高氮含能配合物[Zn(DAT)₆](ClO₄)₂(DAT＝1,5-二氨基四唑), 并用元素分析、傅立叶变换红外光谱对其结构进行了表征. 利用缓慢蒸发溶剂法培养出其单晶, 采用X射线单晶衍射仪测定其晶体结构, 结果表明该晶体属于三方晶系, 空间群, a＝b＝1.18398(9) nm, c＝0.65700(10) nm, γ＝120°, V＝0.79760(15) nm³, Z＝1. 在目标配合物的最小不对称单元中有1个Zn^2＋, 6个DAT分子和2个. 来自6个DAT分子的6个N原子分别与中心Zn^2＋配位, 形成一个六配位、非中心对称的畸变八面体结构. 用差示扫描量热分析、热重-微分热重分析结合红外光谱研究了标题化合物的热分解机理以及分解反应动力学参数. 测定了标题配合物的感度性能, 结果表明标题配合物具有一定的摩擦感度.     

Synthesis, structure, photoluminescence and theoretical study of (MQ)(CdBr4) with MQ2+ generated In Situ (MQ2+ = N-Me-4,4′-bipyridinium)

A new compound (MQ)(CdBr₄) (1; MQ²⁺ = N-Me-4,4′-bipyridinium), in which the MQ²⁺ was generated in situ, has been synthesized via hydrothermal reaction. The title compound features an isolated structure, based on discrete MQ²⁺ moieties and tetrahedral cadmium atoms terminally coordinated by four bromine atoms. The MQ²⁺ moieties and tetrabromo-cadmium dianions are linked via hydrogen bonds. Photoluminescent investigation reveals that the title compound displays a strong blue-light emission, which is attributed to a ligand-to-ligand charge-transfer (LLCT; from the HOMO of the bromine atoms to the LUMO+1 of the MQ²⁺ moieties) mechanism probed by molecular orbital (MO) calculations.     

Synthesis,crystal structure,and density functional theory study of a new compound 4-(2-chlorobenzyl)-1-(5-fluoro-2-hydroxy-3-(thiomorpholinomethyl)phenyl [1,2,4]triazolo[4,3-a]quinazolin-5(4H)-one

In this paper, a novel SHP244 derivative 4-(2-chlorobenzyl)-1- (5-fluoro-2-hydroxy-3- [thiomorph-olinomethyl] phenyl)- [1,2,4]triazolo [4,3-a] quinazolin-5(4H)-one was synthesized through five steps. The single crystals were grown in a suitable solvent system (dichloromethane and methanol). Its structure was confirmed by ¹H NMR, ¹³C NMR spectroscopy, ESI-MS, m/z: 534.12[M-H] (MS), FT-IR, and X-ray single crystal diffraction. The crystal structure of the title compound was optimized by density functional theory (DFT) calculation. The crystal structure after X-ray single crystal diffraction was compared with the structure optimized by DFT calculation, and the result shows that the two structures are consistent. In order to explore certain physical and chemical properties, the frontier molecular orbital and molecular electrostatic potential of the title compound were analyzed. In addition, the docking of the title compound to the target protein was studied to understand the docking effect of the compound with the target protein.     

Studies on the crystal structure and characterization of N-(4-acetylphenyl)-N’-(2-nitrobenzoyl)-thiourea

N-(4-acetylphenyl)-N′-(2-nitrobenzoyl)-thiourea has been synthesized in high yield under PEG-400 as the phase-transfer catalyst and its the compound structure was determined by single crystal X-ray diffraction. The compound is also a considerable plant-growth regulator. In addition, the compound L exhibited selective recognition for Hg²⁺ over other metals ions such as Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺, and Mg²⁺ in DMSO solutions.     

1,2,3-triazole derivative: Synthesis,characterization, DFT,molecular docking study and antibacterial-antileishmanial activities

In this study, 4-((1-(4-chlorobenzyl)-1H-1,2,3-triazole-4-yl)methoxy)-3-methoxybenzaldehyde (I) was synthesized and molecular structure of compound I was confirmed by FTIR and NMR (¹H and ¹³C NMR) spectroscopic methods. The geometric structure of compound I was optimized by DFT/B3LYP method using 6–311++G(d, p) basis set. The molecular docking study was carried out against six different proteins. The antibacterial and antileishmanial activities of compound I were tested by microdilution broth with Alamar blue method and minimum inhibitor concentrations (MIC) were determined. According to the test results, it was found to be effective against eleven types of bacteria at different concentrations (MIC: 312–5000 ​μg/mL). In addition, compound I was not effective against leishmania species at the concentrations that were examined.     

N,N'-二(二乙氧基硫代磷酰基)-1,4-苯二胺的合成、晶体结构及热性能研究

通过二乙氧基硫代磷酰氯与对苯二胺反应生成了标题化合物N,N'-二(二乙氧基硫代磷酰基)-1,4-苯二胺，并应用元素分析, FTIR及¹H NMR对标题化合物进行了表征. 利用X射线单晶衍射测定了其晶体结构, 同时应用TG分析法对其热性能进行了分析. 标题化合物的相对分子质量M_r＝412.42, 为正交晶系, Pbca空间群, 晶胞参数为a＝0.86936(16) nm, b＝1.2787(2) nm, c＝1.8897(3) nm, β＝90°, V＝2.1006(7) nm³, Z＝8, D_c＝1.304 g/cm³, μ(Mo Kα)＝0.425 mm^－1, F(000)＝872, S＝1.052. 最终偏离因子R＝0.0628, wR＝0.1860, 可观测衍射点1852个[I＞2σ(I)]. 该晶体通过对苯二胺连接并以中心对称分布, 并形成层状结构, 且存在弱的分子内氢键N—H…S. TG分析表明该化合物有很好的热稳定性及成炭性, 通过其阻燃聚丙烯腈表明, 该物质是一种高效能的膨胀型阻燃剂.     

Single Crystal to Single Crystal (SC‐to‐SC) Transformation from a Nonporous to Porous Metal–Organic Framework and Its Application Potential in Gas Adsorption and Suzuki Coupling Reaction through Postmodification

A new amino‐functionalized strontium–carboxylate‐based metal–organic framework (MOF) has been synthesized that undergoes single crystal to single crystal (SC‐to‐SC) transformation upon desolvation. Both structures have been characterized by single‐crystal X‐ray analysis. The desolvated structure shows an interesting 3D porous structure with pendent ?NH₂ groups inside the pore wall, whereas the solvated compound possesses a nonporous structure with DMF molecules on the metal centers. The amino group was postmodified through Schiff base condensation by pyridine‐2‐carboxaldehyde and palladium was anchored on that site. The modified framework has been utilized for the Suzuki cross‐coupling reaction. The compound shows high activity towards the C?C cross‐coupling reaction with good yields and turnover frequencies. Gas adsorption studies showed that the desolvated compound had permanent porosity and was microporous in nature with a BET surface area of 2052 m² g^?1. The material also possesses good CO₂ (8 wt %) and H₂ (1.87 wt %) adsorption capabilities.     

Crystal Structure and Theoretical Calculation of 1,4-Bis-(1-ferrocenesulfonyl-2-benzimidazolyl) Butane

A N,N′‐bisferrocenesulfonyl bisbenzimidazole compound 1,4‐bis(1‐ferrocenesulfonyl‐2‐benzimidazolyl) butane was prepared. Its crystal structure was determined. The crystal belongs to triclinic with space group P‐1 and a=0.87241(13) nm, b=0.97553(15) nm, c=1.4120(2) nm, and α=83.041(2) °, β=72.454(2)°, γ=69.732(2)°, the unit cell volume V=1.0746(3) nm³, the molecule number in one unit cell Z=1, the absorption coefficient μ=1.191 mm^?1, the calculated density D_c=1.584 g/cm³. The theoretical investigation of the compound as a structure unit was fully optimized by B3LYP/6‐31G method in Gaussian 03 package, and the most stable structure of the compound in theory was obtained. The two results were compared. The optimized structure was in accordance with the crystal structure in the main, suggesting that the molecular geometry optimization of the structures was reliable and the calculation method used was reliable. The distribution of atomic charges and the energy, and composition of frontier molecular orbits were analyzed. Thermal analysis indicated that it is stable before melting.