Quinine‐modified polymer monolithic column with reversed‐phase /strong anion‐exchange mixed‐mode for pressurized capillary electrochromatography

Via the facile ring‐opening reaction of epoxy groups with quinine, a novel polymer monolith with quaternary ammonium for reversed‐phase/strong anion‐exchange mixed‐mode has been fabricated for pressurized capillary electrochromatography (pCEC). Optimization on the preparation of quinine‐modified monoliths has been investigated, and characteristics including morphology, permeability, mechanical stability, reproducibility, and column performance have been also studied. Active quaternary ammonium groups were conveniently produced to generate cationic action sites and stable anodic electroosmotic flow. Multiple interactions including reversed‐phase, strong anion‐exchange, electrostatic repulsion and π–π stacking interactions were obtained. Satisfactory separation capability of various analytes such as alkylbenzenes, polycyclic aromatic hydrocarbons, benzoic acid and its homologs, and β₂‐receptor excitants has been achieved. Applied to the real sample, the good resolution of three alkaloids in Corydalis yanhusuo were achieved by pCEC with the quinine‐modified monolith. The results light a potential access to facilely fabricating quaternary ammonium‐functionalized polymer monolith with multiple interactions for efficient electrochromatography profiling of various compounds.     

Sulfoalkylbetaine‐based monolithic column with mixed‐mode of hydrophilic interaction and strong anion‐exchange stationary phase for capillary electrochromatography

A novel monolithic stationary phase with mixed mode of hydrophilic and strong anion exchange (SAX) interactions based on in situ copolymerization of pentaerythritol triacrylate (PETA), N,N‐dimethyl‐N‐methacryloxyethyl N‐(3‐sulfopropyl) ammonium betaine (DMMSA) and a selected quaternary amine acrylic monomer was designed as a multifunctional separation column for CEC. Although the zwitterionic functionalities of DMMSA and hydroxy groups of PETA on the surface of the monolithic stationary phase functioned as the hydrophilic interaction (HI) sites, the quaternary amine acrylic monomer was introduced to control the magnitude of the EOF and provide the SAX sites at the same time. Three different quaternary amine acrylic monomers were tested to achieve maximum EOF velocity and highest plate count. The fabrication of the zwitterionic monolith (designated as HI and SAX stationary phase) was carried out when [2‐(acryloyloxy)ethyl]trimethylammonium methylsulfate was used as the quaternary amine acrylic monomer. The separation mechanism of the monolithic column was discussed in detail. For charged analytes, a mixed mode of HI and SAX was observed by studying the influence of mobile phase pH and salt concentration on their retentions on the poly(PETA‐co‐DMMSA‐co‐[2‐(acryloyloxy)ethyl]trimethylammonium methylsulfate) monolithic column. The optimized monolith showed good separation performance for a range of polar analytes including nucleotides, nucleic acid bases and nucleosides, phenols, estrogens and small peptides. The column efficiencies greater than 192 000 theoretical plates/m for estriol and 135 000 theoretical plates/m for charged cytidine were obtained.     

Hypercrosslinked strong anion‐exchange resin for extraction of acidic pharmaceuticals from environmental water

Two novel high‐specific surface area polymeric sorbents (HXLPP‐SAXa and HXLPP‐SAXb) were synthesised and evaluated as solid‐phase extraction sorbents. The novel sorbents under study are based on hypercrosslinked polymer microspheres and designed specifically to offer ion‐exchange properties; the specific polymers of interest in the current work have been chemically modified in such a way as to impart a tuneable level of strong anion‐exchange character onto the sorbents. The novel sorbents were applied as strong anion‐exchange sorbents in solid‐phase extraction studies, with the goal being to selectively extract a group of acidic compounds from complex environmental samples in an efficient manner. Out of two HXLPP‐SAX resins evaluated in this study, it was found that the sorbent with the lower ion‐exchange capacity (HXLPP‐SAXa) gave rise to the best overall performance characteristics and, indeed, was found to compare favourably to the solid‐phase extraction performance of commercial strong anion‐exchange sorbents. When the HXLPP‐SAXa sorbent was applied to the solid‐phase extraction of environmental water samples, the result showed quantitative and selective extraction of low levels of acidic pharmaceuticals from 500 mL of river water and 100 mL of effluent wastewater.     

Preparation of highly hydrophilic magnetic nanoparticles with anion‐exchange ability and their application for the extraction of non‐steroidal anti‐inflammatory drugs in environmental samples

Diallyldimethylammonium chloride modified magnetic nanoparticles were synthesized by the “thiol‐ene” click chemistry reaction. Diallyldimethylammonium chloride rendered the material plenty of quaternary ammonium groups, and thus the excellent aqueous dispersibility and anion‐exchange capability. The novel material was then used as the magnetic solid‐phase extraction sorbent to extract eight non‐steroidal anti‐inflammatory drugs from water samples. Combined with high‐performance liquid chromatography and ultraviolet detection, under the optimal conditions, the developed method exhibited wide linearity ranges (1–1000, 2–1000, and 5–1000 ng/mL) with recoveries of 88.0–108.6% and low limits of detection (0.3–1.5 ng/mL). Acceptable precision was obtained with satisfactory intra‐ and inter‐day relative standard deviations of 0.4–4.4% (n = 3) and 1.1–5.5% (n = 3), respectively. Batch‐to‐batch reproducibility was acceptable with relative standard deviations <9.7%. The hydrophilic magnetic nanoparticle featured with quaternary ammonium groups showed high analytical potential for acidic analytes in environmental water samples.     

Silica‐supported polymeric monolithic column with a mixed mode of hydrophilic and strong cation‐exchange interactions for microcolumn liquid chromatography

A novel sulfonic acid group containing hydrophilic strong cation‐exchange monolith was prepared by in situ coating 5 μm bare silica particles with the copolymers of glycidyl methacrylate and pentaerythritol triacrylate and further sulfonating the prepared polymer matrix with Na₂SO₃ inside a 150 μm id capillary. The preparation conditions were investigated, and the method was described in detail. The prepared column was characterized by comparing with its counterparts reported previously in terms of matrix morphology, preparation reproducibility, permeability, swelling–shrinking behavior, mechanical stability, hydrophilicity, binding capacity, and column efficiency. The swelling–shrinking behavior of the present column in solvents of different polarities was negligible, the hydrophobicity could be suppressed at the acetonitrile concentrations higher than 40% v/v, and the binding capacities were 256 μequiv/mL and 20.1 mg/mL for Cu²⁺ and lysozyme, respectively. The minimum theoretical plate heights were 8, 10, and 13 μm, and the values of the C term in van Deemter equation were 9, 12, and 35 ms for the test analytes of Na⁺, thiourea, and cytidine 5ʹ‐monophosphate, respectively. This column exhibited an excellent performance in the separations of monovalent inorganic cations, uncharged polar, and charged polar compounds.     

Preparation and characterization of anion‐exchange membranes derived from poly(vinylbenzyl chloride‐co‐styrene) and intercalated montmorillonite

In this paper, three organic intercalating agents containing cations [hexadecyl trimethyl ammonium bromide (CTAB), poly(acrylamide‐co‐diallyldimethylammonium chloride), and quaternized polyethyleneimine] are used to prepare intercalated montmorillonites (MMT) by ion‐exchange method. Then the modified MMTs are doped with vinylbenzyl chloride and styrene copolymer [poly(vinylbenzyl chloride‐co‐styrene)] for fabricating composite anion‐exchange membranes (AEM). Fourier transform infrared, X‐raydiffraction, thermogravimetric analysis, scanning electron microscopy, and Mastersizer laser particle size analyzer are employed to characterize the structure and morphology of MMTs and AEMs. The successful intercalation of MMTs is approved, and the MMT intercalated by CTAB shows an interlayer distance of 2.31 nm. The properties of the composite membranes including water uptake, mechanical property, and ionic conductivity are investigated. Among all the AEMs, the composite membrane containing MMT sheets with CTAB demonstrates better compositive performances. It presents an ionic conductivity of 2.09 × 10^?2 S cm^?1 at 80°C and good alkaline solution stability. Copyright © 2016 John Wiley & Sons, Ltd.     

Two‐dimensional strong cation exchange/positively charged reversed‐phase liquid chromatography for alkaloid analysis and purification

Peak tailing and nonalkaloid coelution usually hinder alkaloid purification. In this study, a 2DLC, strong cation exchange (SCX) coupled with positively charged RP (PGRP) LC, was developed to overcome these problems. Ten compounds including basic and nonbasic compounds were analyzed. Nonbasic compounds, which are coeluted with basic compounds on RP or PGRP columns, were weakly retained on the SCX column. In addition, a symmetrical peak shape (tailing factors <1.2) of basic compounds can be obtained in the current system. Compared to two other 2D systems, the current system provided the highest orthogonality (R² = 0.045). Furthermore, the SCX coupled with PGRP system was applied for alkaloid purification from a traditional Chinese medicine. Nineteen alkaloids were obtained and one of them was identified as a novel compound. The overall results demonstrate that the proposed system is a powerful tool for alkaloid purification.     

Phosphoproteome analysis of human liver tissue by long‐gradient nanoflow LC coupled with multiple stage MS analysis

Reversible protein phosphorylation plays a critical role in liver development and function. Comprehensively cataloging the phosphoproteins and their phosphorylation sites in human liver tissue will facilitate the understanding of physiological and pathological mechanisms of liver. Owing to lacking of efficient approach to fractionate phosphopeptides, nanoflow‐RPLC with long‐gradient elution was applied to reduce the complexity of the phosphopeptides in this study. Two approaches were performed to further improve the coverage of phosphoproteome analysis of human liver tissue. In one approach, ten‐replicated long‐gradient LC‐MS/MS runs were performed to analyze the enriched phosphopeptides, which resulted in the localization of 1080 phosphorylation sites from 495 proteins. In another approach, proteins from liver tissue were first fractionated by SDS‐PAGE and then long‐gradient LC‐MS/MS analysis was performed to analyze the phosphopeptides derived from each fraction, which resulted in the localization of 1786 phosphorylation sites from 911 proteins. The two approaches showed the complementation in phosphoproteome analysis of human liver tissue. Combining the results of the two approaches, identification of 2225 nonredundant phosphorylation sites from 1023 proteins was obtained. The confidence of phosphopeptide identifications was strictly controlled with false discovery rate (FDR)≤1% by a MS²/MS³ target‐decoy database search approach. Among the localized 2225 phosphorylated sites, as many as 70.07% (1559 phosphorylated sites) were also reported by others, which confirmed the high confidence of the sites determined in this study. Considering the data acquired from low accuracy mass spectrometer and processed by a conservative MS²/MS³ target‐decoy approach, the number of localized phosphorylation sites obtained for human liver tissue in this study is quite impressive.     

Simultaneous determination of 13 carbohydrates using high‐performance anion‐exchange chromatography coupled with pulsed amperometric detection and mass spectrometry

A simple, accurate, and highly sensitive method was developed for the determination of 13 carbohydrates in polysaccharide of Spirulina platensis based on high‐performance anion‐exchange chromatography coupled with pulsed amperometric detection and mass spectrometry. Samples were extracted with deionized water using ultrasonic‐assisted extraction, and the ultrasound‐assisted extraction conditions were optimized by Box–Behnken design. Then the extracted polysaccharide was hydrolyzed by adding 1 mol/L trifluoroacetic acid before determination by high‐performance anion‐exchange chromatography coupled with pulsed amperometric detection and confirmed by high‐performance anion‐exchange chromatography coupled with mass spectrometry. The high‐performance anion‐exchange chromatography coupled with pulsed amperometric detection method was performed on a CarboPac PA20 column by gradient elution using deionized water, 0.1 mol/L sodium hydroxide solution, and 0.4 mol/L sodium acetate solution. Excellent linearity was observed in the range of 0.05–10 mg/L. The average recoveries ranged from 80.7 to 121.7%. The limits of detection and limits of quantification for 13 carbohydrates were 0.02–0.10 and 0.2–1.2  μg/kg, respectively. The developed method has been successfully applied to ambient samples, and the results indicated that high‐performance anion‐exchange chromatography coupled with pulsed amperometric detection and mass spectrometry could provide a rapid and accurate method for the simultaneous determination of carbohydrates.     

Two-dimensional strong cation-exchange liquid chromatography/reversed-phase pressurized capillary electrochromatography for separation of complex samples

A 2-D separation platform was constructed using micro strong cation-exchange liquid chromatography (μ-SCXLC) and reversed-phase pressurized capillary electrochromatography (RP-pCEC) for the analysis of complex samples. Samples were fractionated by the first-dimension μ-SCXLC with a linear solvent gradient and then injected into the second-dimension RP-pCEC for further separation. The μ-SCXLC/RP-pCEC 2-D system with three separation mechanisms, namely strong cation-exchange, reversed-phase chromatography and electrophoresis, provided high selectivity, high resolution and high peak capacity compared to one-dimensional chromatographic approaches. Separation effectiveness of this 2-D system was demonstrated by the analysis of different kinds of complex samples, such as traditional Chinese medicine Cortex Phellodendri, bovine serum albumin (BSA) tryptic digest and real serum tryptic digest. A theoretical peak capacity of approximately 1200 was achieved, which proves its promising potential for the separation and analysis of complex samples.     

Histidine‐modified organic‐silica hybrid monolithic column for mixed‐mode per aqueous and ion‐exchange capillary electrochromatography

A novel organic‐silica hybrid monolith was prepared through the binding of histidine onto the surface of monolithic matrix for mixed‐mode per aqueous and ion‐exchange capillary electrochromatography. The imidazolium and amino groups on the surface of the monolithic stationary phase were used to generate an anodic electro‐osmotic flow as well as to provide electrostatic interaction sites for the charged compounds at low pH. Typical per aqueous chromatographic behavior was observed in water‐rich mobile phases. Various polar and hydrophilic analytes were selected to evaluate the characteristics and chromatographic performance of the obtained monolith. Under per aqueous conditions, the mixed‐mode mechanism of hydrophobic and ion‐exchange interactions was observed and the resultant monolithic column proved to be very versatile for the efficient separations of these polar and hydrophilic compounds (including amides, nucleosides and nucleotide bases, benzoic acid derivatives, and amino acids) in highly aqueous mobile phases. The successful applications suggested that the histidine‐modified organic‐silica hybrid monolithic column could offer a wide range of retention behaviors and flexible selectivities toward polar and hydrophilic compounds.     

Simultaneous separation and determination of six arsenic species in rice by anion‐exchange chromatography with inductively coupled plasma mass spectrometry

The simultaneous separation and determination of arsenite As(III), arsenate As(V), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB), and arsenocholine (AsC) in rice samples have been carried out in one single anion‐exchange column run by high‐performance liquid chromatography with inductively coupled plasma mass spectrometry. To estimate the effect of variables on arsenic (As) speciation, the chromatographic conditions including type of competing anion, ionic strength, pH of elution buffer, and flow rate of mobile phase have been investigated by a univariate approach. Under the optimum chromatographic conditions, baseline separation of six As species has been achieved within 10 min by gradient elution program using 4 mM NH₄HCO₃ at pH 8.6 as mobile phase A and 4 mM NH₄HCO₃, 40 mM NH₄NO₃ at pH 8.6 as mobile phase B. The method detection limits for As(III), As(V), MMA, DMA, AsB, and AsC were 0.4, 0.9, 0.2, 0.4, 0.5, and 0.3 μg/kg, respectively. The proposed method has been applied to separation and quantification of As species in real rice samples collected from Hunan Province, China. The main As species detected in all samples were As(III), As(V) and DMA, with inorganic As accounting for over 80% of total As in these samples.     

Preparation of a long‐alkyl‐chain‐based hybrid monolithic column with mixed‐mode interactions using a “one‐pot” process for pressurized capillary electrochromatography

A simple “one‐pot” approach for the preparation of a new vinyl‐functionalized organic–inorganic hybrid monolithic column is described. In this improved method, the hydrolyzed alkoxysilanes of tetramethoxysilane and triethoxyvinylsilane were used as precursors for the synthesis of a silica‐based monolith, while 1‐hexadecene and sodium ethylenesulfonate were used as vinyl functional monomers along with azobisisobutyronitrile as an initiator. The effects of reaction temperature, urea content, and composition of organic monomers on the column properties (e.g. morphology, mechanical stability, and chromatographic performance) were investigated. The monolithic column was used for the separation of neutral solutes by reversed‐phase pressurized capillary. Furthermore, the monolith can separate various aromatic amines, which indicated its excellent cation‐exchange capability and hydrophobic interactions. The baseline separation of the aromatic amines was obtained with a column efficiency of up to 78 000 plates/m.     

Comparison of different imidazolium supported ionic liquid polymeric phases with strong anion-exchange character for the extraction of acidic pharmaceuticals from complex environmental samples

Two imidazolium supported ionic liquid phases (SILPs) containing different anions, trifluoromethanesulphonate [CF(3) SO(3) (-) ], and tetrafluoroborate [BF(4) (-) ], were synthesized and evaluated as solid-phase extraction sorbents for extracting acidic pharmaceuticals from aqueous samples under strong anion-exchange conditions, which include an effective cleanup of the sample. The best SILP material [MI(+) ][CF(3) SO(3) (-) ] was selected and successfully applied to the determination of acidic pharmaceuticals in different types of water samples (river water and effluent wastewater). The results were then compared to the previously synthesized SILP material based on [MI(+) ][CF(3) COO(-) ] and the commercially available Oasis MAX sorbent.     

In‐tube solid‐phase microextraction capillary column packed with mesoporous TiO2 nanoparticles for phosphopeptide analysis

In this study, an in‐tube solid‐phase microextraction column packed with mesoporous TiO₂ nanoparticles, coupled with MALDI–TOF–MS, was applied to the selective enrichment and detection of phosphopeptides in complex biological samples. The mesoporous TiO₂ nanoparticles with high specific surface areas, prepared by a sol–gel and solvothermal method, were injected into the capillary using a slurry packing method with in situ polymerized monolithic segments as frits. Compared with the traditional solid‐phase extraction method, the TiO₂‐packed column with an effective length of 1 cm exhibited excellent selectivity (α‐casein/β‐casein/BSA molar ratio of 1:1:100) and sensitivity (10 fmol of a β‐casein enzymatic hydrolysis sample) for the enrichment of phosphopeptides. These performance characteristics make this system suitable for the detection of phosphorylated peptides in practical biosamples, such as nonfat milk.     

Characterization of human papillomavirus by capillary isoelectric focusing with whole‐column imaging detection

CIEF with whole‐column imaging detection (WCID) can be a useful tool for the characterization and identification of human papillomavirus (HPV). This article is the initial report of the determination of the pI of HPV by CIEF‐WCID method. In this study, components of the assay selected for optimization were ampholytes, additives, methylcellulose concentration, HPV concentration, salt concentration, and focusing time. Then the optimization CIEF‐WCID method was validated for HPV 16L1 and HPV 18L1. As a result, a precise method to analyze the pI values of HPVs was achieved with RSD < 1.0%. The HPV peak pattern was reproducible. CIEF‐WCID had great potential for HPV quality control, as WCID eliminated the mobilization step required by the conventional single‐point detection. In the example, the five HPVs displayed pI values of 8.43 ± 0.06 (n = 10; HPV 6L1), 8.70 ± 0.04 (n = 10; HPV 11L1), 7.94 ± 0.05 (n = 18; HPV 16L1), 7.57 ± 0.04 (n = 18; HPV 18L1), and 8.45 ± 0.05 (n = 10; HPV 58L1). This CIEF‐WCID platform could be a powerful analytical tool for characterization, process development support, release testing, and stability study in pharmaceutical industry.     

Nano‐amylose‐2,3‐bis(3,5‐dimethylphenylcarbamate)‐silica hybrid sol immobilized on open tubular capillary column for capillary electrochromatography enantioseparation

The chiral organic‐inorganic hybrid materials can exhibit a high loading, and the chiral selector nanoparticles can create efficient stationary phases for open‐tubular capillary electrochromatography (OT‐CEC). Hence, a novel protocol for the preparation of an OT column coated with nano‐amylose‐2,3‐bis(3,5‐dimethylphenylcarbamate) (nano‐ABDMPC)‐silica hybrid sol through in situ layer‐by‐layer self‐assembly method was developed for CEC enantioseparation. By controlling the assembly cycle number of nano‐ABDMPC‐silica hybrid sol, a homogeneous, dense and stable coating was successfully prepared, which was confirmed by SEM and elemental analysis. As the main parameter influencing the chiral separating effect, the nano‐ABDMPC bearing 3‐(triethoxysilyl)propyl residues concentration was investigated. The experimental results showed that 10.0 mg/mL nano‐ABDMPC bearing 3‐(triethoxysilyl)propyl residues coated OT capillary column possessed chiral recognition ability toward the six enantiomers (phenylalanine, tyrosine, tryptophan, phenethyl alcohol, 1‐phenyl‐2‐propanol, and Tröger's base) at some of the different conditions tested. Additionally, the coated OT column revealed adequate repeatability concerning run‐to‐run, day‐to‐day and column‐to‐column. These results demonstrated the promising applicability of nano‐ABDMPC‐silica hybrid sol coated OT column in CEC enantioseparations.     

A strong inorganic acid‐initiated methacrylate polymerization strategy for room temperature preparation of monolithic columns for capillary electrochromatography

A facile strong inorganic acid‐initiated methacrylate polymerization strategy was developed for fabricating monolithic columns at room temperature. The prepared monoliths were characterized by FTIR spectrometry, mercury intrusion porosimeter and SEM, while their performance was evaluated by CEC for the separation of various types of compounds including alkyl benzenes, polycyclic aromatic hydrocarbons, nonsteroidal anti‐inflammatory drugs, anilines, and nitrophenol isomers. The column‐to‐column and batch‐to‐batch reproducibility for the prepared monoliths in terms of the RSD of EOF flow velocity, retention factor, and the minimum plate height of naphthalene ranged from 3.4 to 12.4%. The fabricated monoliths gave excellent performance for the separation of the test neutral compounds with the theoretical plates of 170 000–232 000 plates per meter for thiourea, and 77 400–112 300 plates per meter for naphthalene. The proposed strong inorganic acid‐initiated methacrylate polymerization strategy is a promising alternative for fabricating organic polymer‐based monoliths.     

High‐performance anion‐exchange chromatography coupled with diode array detection for the determination of dencichine in Panax notoginseng and related species

A high‐performance anion‐exchange chromatography coupled with diode array detection method was developed for the determination of dencichine in Panax notoginseng and related species. The analysis was performed on an Eprogen Synchropak WAX column (4.6 × 250 mm, 6 μm) with 50 mM NaH₂PO₄ aqueous solution isocratic elution. The method was validated in terms of linearity, sensitivity, precision, stability, and accuracy. It was found that the calibration curve for dencichine showed good linearity (R² = 0.9999) within the test range. The LOD and LOQ were 0.77 and 3.06 ng, respectively. The RSD for intra‐ and interday repeatability was 0.2 and 0.5%, respectively. The test solution of dencichine is stable at least for three days at room temperature and for seven days at 4°C. The mean recovery of dencichine was 102.0%. The established method was successfully applied to determine dencichine in the raw root of P. nogoginseng, P. ginseng, and P. quinquefolium as well as the steamed root of P. notoginseng. Compared with previous reports, this method is sensitive, selective, and accurate, which is helpful to evaluate the quality of P. notoginseng and related species.     

Preparation and evaluation of amphiphilic silica‐based monolithic column having surface‐bound octanoyl‐aminopropyl moieties for capillary electrochromatography

A novel amphiphilic silica‐based monolithic column having surface‐bound octanoyl‐aminopropyl moieties was successfully prepared by a one‐step in situ derivatization process. As expected, the amphiphilic monolithic column exhibited RP chromatographic behavior toward non‐polar solutes (e.g., alkyl benzenes) with high column performance. As the pH of the buffer inside the column increases, the EOF changed from −2.65×10⁻⁸m² V⁻¹s⁻¹ at pH 3.0 to 1.20×10⁻⁸ m² V⁻¹s⁻¹ at pH 8.0 with the reversion of EOF at about pH 6.4. Using acidic mobile phase, five aromatic acids can be efficiently separated in less than 6 min under co‐EOF conditions. For basic compounds, symmetrical peaks were obtained due to the existence of hydrophilic acyl amide group, which can effectively minimize the adsorption of the positively charged basic analyte to the silica‐based surface of the capillary column.