Selective Oxidation of Sulfides to Sulfoxides and Sulfones Using n -Butyltriphenylphosphonium Dichromate (Bu n PPh3)2Cr2O7 in the Presence of Aluminium Chloride in Solution and Under Microwave Irradiation

A wide variety of sulfides are efficiently oxidized to their corresponding sulfoxides and sulfones in excellent yields using n-butyltriphenylphosphonium dichromate (BTPPDC) in the presence of aluminium chloride in acetonitrile solution and under microwave irradiation. In addition, selective oxidation of sulfides in the presence of functional groups such as a carbon–carbon double bond, ketone, oxime, aldehyde, ether, and acetal can be considered as a noteworthy advantage of this method.     

Electronic influences on 3J(C,H) coupling constants via -S-, -S(O)- and -SO2-: their determination, calculation and comparison of detection methods

3J(C,H) coupling constants via a sulfur atom in two series of compounds, both including a sulfide, a sulfoxide and a sulfone, were detected experimentally and calculated by quantum mechanical methods. In the first series (1-3) the coupling between a hydrogen, bonded to an sp3 carbon, and an sp2 carbon is treated; the second series (4-6) deals with the coupling between a hydrogen, bonded to an sp3 carbon, and an sp3 carbon. Different pulse sequences (broadband HMBC, SelJres, 1D HSQMBC, J-HMBC-2, selective J-resolved long-range experiment and IMPEACH-MBC) proved to be useful in determining the long-range 3J(C,H) coupling constants. However, the dynamic behaviour of two of the compounds (4 and 6) led to weighted averages of the two coupling constants expected (concerning equatorial and axial positions of the corresponding hydrogens). DFT calculations proved to be useful to calculate not only the 3J(C,H) coupling constants but also the different contributions of FC, PSO, DSO and SD terms; the calculation of the Fermi contact term (FC) was found to be sufficient for the correct estimation of 3J(C,H) coupling constants.     

Preparation and Structure of [Me3N(CF3)2BCCB(CF3)2NMe3]

Bis‐trimethylamine‐ethynyl‐di‐bis(trifluoromethyl)borane [Me₃N(CF₃)₂BCCB(CF₃)₂NMe₃] ( 1 ) has been prepared from trimethylamine‐ethynyl‐bis(trifluoromethyl)borane, [HCCB(CF₃)₂NMe₃], and dimethylamino‐bis(trifluoromethyl)borane, (CF₃)₂BNMe₂. The structure of 1 has been determined by x‐ray crystallography. In the solid state the molecule possesses crystallographic C_i symmetry. The acetylenic attachment to the boron atom is characterized by a short B–C bond length of 1.565(4) Å and an essentially linear B–C–C′ bond angle of 178.1(4)°.     

Bis(dimethylamino)trifluoromethylsulfonium Salze: [CF3S(NMe2)2]+[Me3SiF2]‐, [CF3S(NMe2)2]+[HF2]‐ und [CF3S(NMe2)2]+[CF3S]‐

Bis(dimethylamino)trifluoro sulfonium Salts: [CF₃S(NMe₂)₂]⁺[Me₃SiF₂]^‐, [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ and [CF₃S(NMe₂)₂]⁺[CF₃S]^‐ From the reaction of CF₃SF₃ with an excess of Me₂NSiMe₃ [CF₃(NMe₂)₂]⁺[Me₃SiF₂]^‐ (CF₃‐BAS‐fluoride) ( 5 ), from CF₃SF₃/CF₃SSCF₃ and Me₂NSiMe₃ [CF₃S(NMe₂)₂]⁺‐ [CF₃S]^‐ ( 7 ) are isolated. Thermal decomposition of 5 gives [CF₃S(NMe₂)₂]⁺ [HF₂]^‐ ( 6 ). Reaction pathways are discussed, the structures of 5 ‐ 7 are reported.     

[2+4] and [2+2] Cycloaddition Reactions of N‐Sulfinyl Carboxylic Acid Amides with (CF3)2BNMe2. Crystal Structure of cyclo‐(CF3)2B‐NMe2‐S(=O)‐N=C(p‐CH3C6H4)‐O

N‐sulfinylacylamides R‐C(=O)‐N=S=O react with (CF₃)₂BNMe₂ ( 1 ) to form, by [2+4] cycloaddition, six‐membered rings cyclo‐(CF₃)₂B‐NMe₂‐S(=O)‐N=C(R)‐O for R = Me ( 2 ), t‐Bu ( 3 ), C₆H₅ ( 4 ), and p‐CH₃C₆H₄ ( 5 ) while N‐sulfinylcarbamic acid esters R‐O‐C(=O)‐N=S=O react with 1 to yield mixtures of six‐membered (cyclo‐(CF₃)₂B‐NMe₂‐S(=O)‐N=C(OR)‐O) and four‐membered rings (cyclo‐(CF₃)₂B‐NMe₂‐S(=O)‐N(C=O)OR) for R = Me ( 6 and 9 ), Et ( 7 and 10 ), and C₆H₅ ( 8 and 11 ). The structure of 5 has been determined by X‐ray diffraction.     

π-Annulation reactions of 4-thiazolidinone enaminones in the synthesis of fused bi- and tri-cyclic compounds

The α-C position in 4-oxo thiazolidinones functions as one of the three possible nucleophilic sites in these molecules. We used the inherent reactivity of α-C of the exocyclic double bond (a so called push pull system) to obtain bicyclic fused thiazolidinones via π-annulation cyclization. Appropriate reaction conditions to selectively activate this position and secondary nitrogen towards N,π-annulation were found. Furthermore, the intramolecular vinylogous iminium ion 6-exo-trig cyclization was used to access fused bicyclic precursors for the π-annulation in order to obtain the novel tricyclic structures stereoselectively.     

Iodic Acid (HIO3) in Combination with Tetraethylammonium Bromide as a Catalyst for Selective and Accelerated Sulfoxidation

The article describes the use of iodic acid in combination with catalytic amounts of tetraethylammonium bromide (TEAB) as a mild and alternative reagent system for oxidation of sulfides to sulfoxides. The salient features of the developed system are room‐temperature reactions, short reaction times, and compatibility with a wide range of functional groups.     

The synthesis of isoindolin-3-ones,Phthalazin-4(3H)-ones and related systems

The reaction between methyl 2-cyanobenzoate and its pyridine analogues gave isoindolin-3-ones, phthalazin-4(3H)-ones and their corresponding aza analogues. Some reactions of 1-benzylaminoiminoisoindolin-3-one 5b were investigated.     

Green chemistry approach to the synthesis of 3-substituted-quinazolin-4(3H)-ones and 2-methyl-3-substituted-quinazolin-4(3H)-ones and biological evaluation

ABSTRACT

A synthesis of two series of 3-substituted quinazolinones was performed utilizing a green chemistry approach, deep eutectic solvents and microwaves, namely. 2-Methyl-3-substituted-quinazolin-4(3H)-one derivatives were synthesized in a two-step reaction, using choline chloride:urea deep eutectic solvent (DES). 3-Substituted-quinazolin-4(3H)-ones were synthesized in one-pot one-step reaction of anthranilic acid, amines and orthoester in a microwave reactor. For the synthesis of 2-methyl-3-substituted-quinazolin-4(3H)-ones, first conventional synthesis of benzoxazinone, as an intermediate, was performed. Further, benzoxazinone in reaction with corresponding amines, in choline choline:urea deep eutectic solvent, furnished desired compounds. These procedures are based on green principles with the aim of developing synthetic routes for the potential antitumor agents. All compounds were characterized by LC/MS, ¹H NMR and ¹³C NMR spectral techniques. Compound 1 bearing trifluoromethoxyphenyl group showed promising activity against HuT-78 cell line with IC₅₀ of 51.4?±?5.1?µM.     

1,1,2,2-Tetrahydroperoxy-1,2-diphenylethane as new oxidant for chemoselective and catalyst free oxidation of sulfides to sulfoxides and sulfones

A catalyst free and chemoselective oxidation of sulfides to sulfoxides or sulfones was developed using 1,1,2,2-tetrahydroperoxy-1,2-diphenylethane as a new oxidant. This scope has shown the achievement of various sulfoxides and sulfones which were obtained selectively in high yields at room temperature.     

Efficient,Stereoselective Approach to the Synthesis of 3-(1-Phenyl-2-(Z-styrylsulfonyl)-1H-imidazol-4-yl)-2H-chromen-2-ones

Reaction of phenyl acetylene with 3-(1-aryl-2-mercapto-4-imidazolyl)-2H-1-benzopyran-2-ones (4) in the presence of sodium hydroxide in absolute ethanol led to the formation of 3-(1-phenyl-2-(Z-styrylthio)-1H-imidazol-4-yl)-2H-chromen-2-ones (6) in excellent yields. These, on further oxidation with H₂O₂/AcOH, gave the corresponding sulfones (7) with retention of stereochemistry.

Highly efficient solvent-free synthesis of quinazolin-4(3H)-ones and 2,3-dihydroquinazolin-4(1H)-ones using tetrabutylammonium bromide as novel ionic liquid catalyst

<正>A simple and efficient procedure for the synthesis of 2-arylquinazolin-4(3H)-ones has been developed through cyclocondensation of 2-aminobenzamide with aromatic aldehydes using tetrabutylammonium bromide(TBAB) as novel neutral ionic liquid catalyst in the presence of copper(Ⅱ) chloride(CuCl_2) as oxidizing agent under solvent-free conditions at 100℃.In the absence of CuCl_2 and under a nitrogen atmosphere,the unoxidized intermediates,2-aryl-2,3-dihydroquinazolin-4(1H)-ones,were isolated. Treatment of these intermediates with CuCl_2 in TBAB media gave the oxidized products 2-arylquinazolin-4(3H)-ones.On the other hand,cyclocondensation of 2-aminobenzamide with aromatic aldehydes in TBAB under microwave irradiation directly gave 2- arylquinazolin-4(3H)-ones.     

Catalytic performance of tannic acid-SO3H supported on Fe3O4@SiO2 nanoparticles for synthesis of 2,3-dihydroquinazolin-4(1H)-ones

In this paper all efforts have been devoted to develop stabilized tannic acid-SO₃H on Fe₃O₄@SiO₂ nanoparticles as the new magnetically and eco-friendly nanocatalyst. This nanocatalyst was identified using different techniques such as fourier transform infrared (FT-IR), Powder X-ray diffraction (XRD), vibrating sample magnetometry (VSM), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDXS) and thermogravimetric analysis (TGA). Catalytic performance of the catalyst in cyclocondensation reaction of anthranilamide with different aldehydes under the friendly environmentally reaction condition led to formation corresponding 2,3-dihydro-4(1H)-quinazolinones compounds in excellent yields. The catalyst could be easily recovered by an external magnet and reused 4 times without significant loss of catalytic activity.     

Dissociation and IVR pathways for the CF3H(H2O)3 cluster

Classical trajectory simulations are used to study the intramolecular dynamics of isolated CF₃H and the CF₃H(H₂O)₃ cluster, by either exciting the CH stretch local mode to then=6 level or by adding an equivalent amount of energy to an OH stretch normal mode. Energy transfer from the CH local mode is statistically the same for CF₃H(H₂O)₃ as for isolated CF₃H, and agrees with previous experimental studies. Clusters excited with 6 quanta in the CH local mode are remarkably stable. Though the CF₃H-(H₂O)₃ intermolecular potential is only 1.5 kcal/mol, only 1 of 26 clusters excited with 6 quanta in the CH local mode dissociate within 10 ps. The absorption linewidth for the CH local mode in CF₃H(H₂O)₃ is related to IVR within CF₃H and not to the unimolecular lifetime of the cluster. When an OH stretch normal mode of the cluster is excited, energy transfer to CF₃H is negligible and nearly one half of the clusters dissociate within 10 ps.     

1-Butyl-4-aza-1-azoniabicyclo[2.2.2]octane Dichromate (BAAOD): An Efficient and Novel Reagent for Oxidation of Sulfides to the Corresponding Sulfoxides

This article describes an efficient and easy method for oxidation of sulfides 1 to their corresponding sulfoxides 2 with 1-butyl-4-aza-1-azoniabicyclo[2.2.2]octane dichromate (BAAOD) under nonaqueous conditions in high yields.     

An Unexpected Diboroxane: Crystal Structure of Me2HN · (CF3)2BOB(CF3)2 · NHMe2

(CF₃)₂BNMe₂ ( 1 ) reacts at room temperature with water in a 2:1 ratio to form bis(dimethylamine)‐tetrakis(trifluoromethyl)diboroxane Me₂HN·(CF₃)₂BOB(CF₃)₂·NHMe₂ ( 2 ), whereas a 1:1 ratio at —78 °C had yielded HO(CF₃)₂B·NHMe₂ ( 3 ). The constitution of 2 has been deduced from multinuclear NMR, IR and mass spectra, and the structure has been determined by single‐crystal X‐ray diffraction. Averaging 1.396(6) Å, the B—O bond length is short, and the B—O—B bond angle, 150.4(3)°, is very wide.     

Fluoroborates by Cleavage of Trimethylamine‐bis(trifluoromethyl)boranes with NEt3 × 3 HF. Structures of C6F5(CF3)2B · NMe3, K[C6H5CH2(CF3)2BF], and K[C6H5(CF3)2BF]

Trimethylamine‐bis(trifluoromethyl)boranes R(CF₃)₂B · NMe₃ (R = cis/trans‐CF₃CF=CF ( 1/2 ), HC≡C ( 3 ), H₂C=CH ( 4 ), C₂H₅ ( 5 ), C₆H₅CH₂ ( 6 ), C₆F₅ ( 7 ), C₆H₅ ( 8 )) react with NEt₃ × 3 HF depending on the nature of R at 155–200 °C under replacement of the trimethylamine ligand to form the corresponding fluoro‐bis(trifluoromethyl)borates [R(CF₃)₂BF]^– ( 1 a/2 a – 8 a ). The structures of 7 , K[C₆H₅CH₂(CF₃)₂BF] ( K‐6 a ), and K[C₆H₅(CF₃)₂BF] ( K‐8 a ) have been investigated by single‐crystal X‐ray diffraction. In 7 the CF₃ groups make short repulsive contacts with NMe₃ and C₆F₅ entities – the B–CF₃ bonds being unusually long. The B–F bond lengths of K‐6 a and K‐8 a (1.446(3) and 1.452(2) Å, respectively) are long for a fluoroborate.     

Vilsmeier reaction of 3-aminopropenamides: one-pot synthesis of pyrimidin-4(3H)-ones

A facile one-pot synthesis of pyrimidin-4(3H)-ones was developed via reactions of a series of readily available 3-aminopropenamides with varied Vilsmeier reagents, and a mechanism involving sequential halogenation, formylation, and intramolecular nucleophilic cyclization is proposed.     

A new approach to the facile synthesis of 2-substituted-quinazolin-4(3H)-ones

A new approach to the facile synthesis of 2-substituted-quinazolin-4(3H)-ones and its derivatives using the condensation reaction of substituted 2-aminobenzamide and orthoesters is reported.     

One-Pot Synthesis and Asymmetric Oxidation of 2-Nitro-4-(Trifluoromethyl)Benzene Containing Sulfides

Abstract

An efficient one-pot method for the preparation of 2-nitro-4-(trifluoromethyl)benzene containing sulfides from 1,1′-disulfanediylbis[2-nitro-4-(trifluoromethyl)benzene] is proposed. The corresponding enantiomerically enriched sulfoxides with up to 78% enantiomeric excess are prepared by the asymmetric oxidation of sulfides using a modified Sharpless method. The yield of sulfoxides is shown to decrease with an increase in the bulk of the aliphatic group and with a decrease of the inductive effect of the hydrocarbonic moiety on the sulfur atom.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT