Laboratory investigation of annular denuders as sampling system for the determination of aliphatic primary and secondary amines in stack gas

A method for the sampling and analysis of aliphatic amines ranging from C₁ to C₅ and some diamines in exhaust gas is described. Two different annular denuder systems coated with phosphoric acid were used for the laboratory investigation of sampling gaseous amines. The denuder sampling systems were tested under different conditions for their readiness to work in stack gas.The reagent 2,4-dinitrofluorobenzene (DNFB) was used in pre-column derivatization of the amines investigated. The amino derivatives were separated using high performance liquid chromatography (HPLC) in conjunction with UV-detection. This method has been used for the examination of emissions from a landfill waste disposal and from animal husbandry with respect to traces of aliphatic amine emissions.     

Molybdatophosphoric Acid/NaNO2 as an Efficient Procedure for the Chemoselective N‐Nitrosation of Secondary Amines

A combination of molybdatophosphoric acid and sodium nitrite in the presence of wet SiO₂ was used as an effective nitrosating agent for the nitrosation of secondary amines under mild and heterogeneous conditions in good to excellent yields. Also, the results of a computational study are investigated in the gas phase for geometry and properties of proposed structures.     

Environmentally friendly chemoselective oxidation of primary aliphatic amines by using a biomimetic electrocatalytic system

Environmentally friendly oxidation of primary aliphatic amines to imines has been successfully achieved, under metal-free conditions, by the use of diverse electrogenerated o-azaquinone mediators. High catalytic performance, together with high chemoselectivity, were observed with electron-poor o-azaquinone catalysts generated from 2-aminoresorcinol derivatives. Similar to copper amine oxidase enzymes, these mediators exhibited lower reactivity toward alpha-branched primary amines and no reactivity toward secondary amines. In the case of 3,4-aminophenol derivatives lacking a 2-hydroxy group, the generated o-azaquinone species failed to catalyze the oxidation of the amine to the corresponding imine. Further mechanistic considerations allowed a rationalization of the crucial role of the 2-hydroxy group in converting a catalytically inert species into a highly effective biomimetic catalyst.     

A rapid and convenient synthesis of gem-bis(dithiocarbamate) derivatives from primary aliphatic amines,carbon disulfide,and aromatic aldehydes using boron trifluoride-diethyl etherate

An efficient route for the synthesis of gem-bis(dithiocarbamate) derivatives is developed using dithiocarbamic acid salts generated from primary aliphatic amines and CS₂. The method offers high yields, employs mild reaction conditions, and demonstrates excellent functional group compatibility. The structures of the products were confirmed spectroscopically and by X-ray analysis.     

A ligand-free and base-free copper catalyzed reaction: arylation of ammonia and primary amines as their acetate salts

A ligand-free, base-free copper catalyzed arylation of ammonia and primary amines as their corresponding acetate salts are established. The Carboxylate group is believed to be catalyzing the arylation of ammonia. This reaction is specific for primary amines.     

Reverse phase high-performance liquid chromatographic determination of primary and secondary aliphatic alcohols as phthalate monoesters by UV detection

Summary Determination of primary and secondary aliphatic alcohols in aqueous and nonaqueous solutions by high-performance liquid chromatography (HPLC) is described. The alcohol is derivatized with phthalic anhydride to yield the corresponding monophthalate. Separation of the derivative is achieved on an ODS-10 reverse phase (RP) column by elution with an appropriate isocratic mobile phase of acetonitrile and aqueous phosphoric acid (0.1%). Detection is accomplished by UV absorption at 230 nm or 280 nm giving linear calibration plots, for alcohols in aqueous solution from 0.05% to 0.50% (w/v) and in pyridine solution from 0.0025% to 0.0250% (w/v).     

Pressurised hot water extraction followed by simultaneous derivatization and headspace solid-phase microextraction and gas chromatography-tandem mass spectrometry for the determination of aliphatic primary amines in sewage sludge

In this paper we describe an environmentally friendly and sensitive method for the determination of ten primary amines in sewage sludge. The method is based on pressurised hot water extraction (PHWE) followed by simultaneous derivatization with pentafluorobenzaldehyde (PFBAY) and headspace solid-phase microextraction (HS-SPME) and subsequent gas-chromatography ion-trap tandem mass spectrometry (GC-IT-MS-MS) analysis. The influence of the main factors on the PHWE of sludge was optimized by a central composite design. For all species the optimal conditions were water at pH 4 as the extracting solvent, an extraction temperature of 100 °C and an extraction time of 15 min. The separation and detection of the ten amines by GC-IT-MS-MS took just 10 min and the entire process took approximately 1 h. Repeatability and reproducibility between days, expressed as RSD (%) (n = 5), were less than 19 and 24%, respectively. The average limit of detection (LOD) was of 65 μg kg⁻¹ s (range found 9-135) and the average limit of quantification (LOQ) was of 230 μg kg⁻¹ (range found 50-450) of dry weight (d.w.). Under optimized conditions we used this method to determine the compounds in industrial and municipal sewage sludge samples and in sludge from a potable water treatment plant. Methylamine and isobutylamine showed the highest levels in one of the industrial sewage sludge samples (404 and 543 mg kg⁻¹ (d.w.), respectively). To our knowledge, this paper presents for the first time the determination of ten primary amines in sewage sludge samples using PHWE.     

Rapid microwave promoted heterocyclization of primary amines with triethyl orthoformate and sodium azide using zinc sulfide nanoparticles as recyclable catalyst

Microwave assisted synthesis of 1-substituted-1H-tetrazoles was developed using zinc sulfide nanoparticles as heterogeneous catalyst under solvent free conditions. The tetrazole derivatives were easily prepared through hterocyclization of primary amines with triethyl orthoformate and sodium azide in the presence of ZnS NPs. The experimental results were shown that a series of 1-substituted tetrazoles were synthesized under microwave irradiation by ZnS NPs as an effective and reusable heterogeneous catalyst in excellent yields. This protocol has advantages rather than other reported methods such as non-acidic catalyst, solvent free conditions and greener process as well as a solid recyclable catalyst. The catalyst was recovered and reused for several cycles with consistent activity.     

Automated on-fiber derivatization with headspace SPME-GC-MS-MS for the determination of primary amines in sewage sludge using pressurized hot water extraction

An automated, environmentally friendly, simple, selective, and sensitive method was developed for the determination of ten primary aliphatic amines in sewage sludge at μg/kg dry weight (d.w.). The procedure involves a pressurized hot water extraction (PHWE) of the analytes from the solid matrix, followed by a fully automated on‐fiber derivatization with 2,3,4,5‐pentafluorobenzaldehyde (PFBAY) and headspace solid‐phase microextraction (HS‐SPME) and subsequent gas chromatography ion‐trap tandem mass spectrometry (GC‐IT‐MS‐MS) analysis. The limits of detection (LODs) of the method were between 0.5 and 45 μg/kg (d.w.) for all compounds except for ethyl‐, isopropyl‐, and amylamine, whose LODs were 70, 109, and 116 μg/kg (d.w.), respectively. The limits of quantification (LOQs) were between 10 and 350 μg/kg (d.w.). Repeatability and intermediate precision, expressed as RSD(%) (n=3), were lower than 18 and 21%, respectively. The method developed enabled to determine primary aliphatic amines in sludge from various urban and industrial sewage treatment plants as well as from a potable treatment plant. Most of the primary aliphatic amines were found in the sewage sludge samples analyzed corresponding to the maximum concentrations to the samples from the urban plant: for instance, isobutylamine and methylamine were found at 7728 and 12 536 μg/kg (d.w.), respectively. Amylamine was detected only in few samples but always at concentrations lower than its LOQ.     

Synthesis of ethyl acetate by esterification of acetic acid with ethanol over a heteropolyacid on montmorillonite K10

In present work, liquid phase esterification of acetic acid with ethanol over dodecatungestophosphoric acid (DTPA) supported on K10 montmorillonite was systematically studied and optimization of process parameters was carried out. The 20% m/m DTPA/K10 was found to be the optimum catalyst with 90% acetic acid conversion and 100% ethyl acetate selectivity. The study was also explored to see the feasibility of 20% m/m DTPA/K10 as a catalyst for the alkylation of acetic acid with other alcohols like methanol, iso-propanol and n-butanol. The 20% m/m DTPA/K10 has shown increased activity with the increase in carbon number, at the same alcohol reflux. The results are novel.     

Phosphomolybdic acid supported on silica gel and promoted with alkali metal ions as catalysts for the esterification of acetic acid by ethanol

Different ratios of phosphomolybdic acid PMA supported on silica gel (1–30 wt%) and promoted with alkali metal hydroxide have been prepared by an impregnation method and calcinated at 350 °C for 4 h. The catalysts were characterized by thermogravimetry (TG), differential thermal analysis (DTA), X-ray diffraction, FT-IR spectroscopy and N₂ adsorption measurements. The surface acidity and basicity of the catalysts were determined by adsorption of pyridine and the dehydration–dehydrogenation of 2-propanol. The gas-phase esterification of acetic acid by ethanol was carried out in a conventional flow bed reactor. The results clearly revealed that among the PMA loading, the use of 10 wt% catalyst showed maximum yield of ethyl acetate. This catalyst also improved on addition of Na or K-hydroxide. These results were correlated with the structure and the acid–base properties of the prepared catalysts.     

Analysis of primary aromatic amines using precolumn derivatization by HPLC fluorescence detection and online MS identification

2-(2-phenyl-1H-phenanthro-[9,10-d]imidazole-1-yl)-acetic acid (PPIA) and 2-(9-acridone)-acetic acid (AAA), two novel precolumn fluorescent derivatization reagents, have been developed and compared for analysis of primary aromatic amines by high performance liquid chromatographic fluorescence detection coupled with online mass spectrometric identification. PPIA and AAA react rapidly and smoothly with the aromatic amines on the basis of a condensation reaction using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) as dehydrating catalyst to form stable derivatives with emission wavelengths at 380 and 440 nm, respectively. Taking six primary aromatic amines (aniline, 2-methylaniline, 2-methoxyaniline, 4-methylaniline, 4-chloroaniline, and 4-bromoaniline) as testing compounds, derivatization conditions such as coupling reagent, basic catalyst, reaction temperature and time, reaction solvent, and fluorescent labeling reagent concentration have also been investigated. With the better PPIA method, chromatographic separation of derivatized aromatic amines exhibited a good baseline resolution on an RP column. At the same time, by online mass spectrometric identification with atmospheric pressure chemical ionization (APCI) source in positive ion mode, the PPIA-labeled derivatives were characterized by easy-to-interpret mass spectra due to the prominent protonated molecular ion m/z [M + H](+) and specific fragment ions (MS/MS) m/z 335 and 295. The linear range is 24.41 fmol-200.0 pmol with correlation coefficients in the range of 0.9996-0.9999, and detection limits of PPIA-labeled aromatic amines are 0.12-0.21 nmol/L (S/N = 3). Method repeatability, precision, and recovery were evaluated and the results were excellent for the efficient HPLC analysis. The most important argument, however, was the high sensitivity and ease-of-handling of the PPIA method. Preliminary experiments with wastewater samples collected from the waterspout of a paper mill and its nearby soil where pollution with aromatic amines may be expected show that the method is highly validated with little interference in the chromatogram.     

Separation of three polar compounds from Rheum tanguticum by high‐speed countercurrent chromatography with an ethyl acetate/glacial acetic acid/water system

The separation of polar compounds by high‐speed countercurrent chromatography is still regarded as a challenge. In this study, an efficient strategy for the separation of three polar compounds from Rheum tanguticum has been successfully conducted by using high‐speed countercurrent chromatography. X‐5 macroporous resin chromatography was used for the fast enrichment of the target compounds. Then, the target fraction was directly introduced into high‐speed countercurrent chromatography for separation using ethyl acetate/glacial acetic acid/water (100:1:100, v/v/v) as the solvent system. Consequently, three polar compounds including gallic acid, catechin, and gallic acid 4‐O‐β‐d ‐(6′‐O‐galloyl) glucoside were obtained with purities higher than 98%. The results showed glacial acetic acid could be such an appropriate regulator for the ethyl acetate/water system. This study provides a reference for the separation of polar compounds from natural products by high‐speed countercurrent chromatography.     

2-(Sulfooxy)propane-1,2,3-tricarboxylic acid as novel and versatile catalyst for the formylation of alcohols and amines using ethyl formate under neat conditions

2-(Sulfooxy)propane-1,2,3-tricarboxylic acid(supported on silica gel) has been introduced as novel and green catalyst for the formylation of alcohols and amines with ethyl formate,as mild formylation agent,under neat conditions at room temperature.     

Optimization of reversed-phase ion-pair chromatography by over-pressurized thin-layer chromatography III. Over-pressurized thin-layer chromatography using 10-camphor sulfonic acid as ion-pair reagent

Summary The use of over-pressurized thin-layer chromatography in ion pair system using acidic type pairing reagent has been studied. The most important aspect when reversed phase ion-pair TLC system is used to apply a suitable procedure for pre-treatment of the sorbents. Because of the acidic type of ion pair reagents cannot be bounded to the surface of the layer by immersion or pre-development with the reagent solution, double coating technique was used for the pre-treatment, the plate was firstly immersed in an ethanolic solution of cetrimide, then the immersion has been repeated by an ethanolic solution of acidic ion pair reagent. The necessary coating of the sorbents can be achieved by this technique. To find the optimal conditions for reversed phase ion pair TLC separation of organic amines, 10-camphor sulfonic acid as reagent, different aliphatic, aromatic amines and diamines and heterocyclic nitrogen compounds, respectively as model compounds were selected. The dependence of the selectivity and efficiency of the separation on the sorbents, on the concentrations of reagents (cetrimide and camphor sulfonic acid) applied for both immersion and in the eluent were investigated in detail. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Direct preparation of oximes and Schiff bases by oxidation of primary benzylic or allylic alcohols in the presence of primary amines using Mn(III) complex of polysalicylaldehyde as an efficient and selective heterogeneous catalyst by molecular oxygen

The present work introduced the new strategy for direct preparation of Schiff base as well as oxime compounds through oxidation of primary benzylic or allylic alcohols in the presence of amines by complexation of Mn(III) to a polymeric Schiff base ligand based on polysalicylaldehyde (PSA-Schiff base-Mn(III) complex). As a new environmentally benign protocol, manganese heterogeneous polymeric catalytic system demonstrated promising oxidation of alcohols in ethanol using molecular oxygen. PSA was synthesized through polycondensation reaction of 2-hydroxy-5-chloromethyl-benzaldehyde and then treated with 2-aminophenol to form polymeric ligand. Average molecular weight of PSA was studied by an analytical method as well as GPC analysis. Formation of the catalyst was characterized step by step by FTIR, UV–Vis, ¹H NMR, TGA, CHN and EDX analyses. Loading amounts of metal ions as well as leaching amount of the catalysis were studied by ICP-OES instrument. The catalyst shows up to high yields for oxidation of primary and secondary primary benzylic or allylic alcohols to carbonyl compounds, especially direct imine formation in a mild, inexpensive and efficient method which can be successfully recovered from the reaction mixture and reused for several times without any remarkable reactivity loss. Effect of solvent, temperature, catalyst amount and oxygen donors along with some blank experiments to elucidation of catalyst activity was evaluated in this work. Also chemoselectivity behavior of the catalyst was investigated with some combinations.     

Synthesis of 3-amino 1H-pyrazoles catalyzed by p-toluene sulphonic acid using polyethylene glycol-400 as an efficient and recyclable reaction medium

Abstract

An efficient synthesis of 3-amino 1H-pyrazoles is described. The reaction of β-keto nitriles with hydrazines in the presence of a catalytic amount of p-toluene sulphonic acid using polyethylene glycol-400 as an efficient and recyclable reaction medium afforded the corresponding 3-amino 1H pyrazoles excellent yields.