Characterization of lipids in complex samples using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

Most lipids are a complex mixture of classes of compounds such as fatty acids, fatty alcohols, diols, sterols and hydroxy acids. In this study, the suitability of comprehensive two-dimensional gas chromatography coupled to a time-of-light mass spectrometer is studied for lipid characterization in complex samples. With lanolin, a refined wool wax, as test sample, it is demonstrated that combined methylation plus silylation is the preferred derivatization procedure to achieve (i) high-quality GC x GC separation and (ii) easily recognizable ordered structures in lipid analysis. Optimization of the GC x GC column combination, the influence of the temperature programme on the quality of the separation, and the potential and limitations of automated TOF-MS-based identification are discussed. The combined power of a 2D separation, ordered structures and MS detection is illustrated by the identification of several minor sample constituents.     

Chemotaxonomy of bacteria by comprehensive GC and GC-MS in electron impact and chemical ionisation mode

The analysis of the cellular lipidic fraction of bacteria is described. After hydrolysis and methylation, the fatty acid methyl esters (FAMEs) are determined by 1-D GC using the Sherlock MIDI bacteria identification system, by comprehensive GC (GC x GC) and by GC-MS in electron impact (EI) and positive chemical ionisation (PCI) mode. With GC x GC, the enhanced selectivity and group type separation provides a more complete elucidation of the fatty acids in microorganisms. GC-EI-MS and GC-PCI-MS were helpful for confirmation. The bacteria selected in this study are Brevundimonas diminuta, Chryseobacterium gleum and Stenotrophomonas maltophilia.     

Analytical Characterization of Fatty Acids Composition of Bioactive Stem Oil of Maytenus royleanus by Gas Chromatography Mass Spectrometry

The significant inhibition and selectivity for human solid tumor cell by oily fraction of Maytenus royleanus, was subjected to GC‐MS analysis for determination of its chemical constituents. GC‐MS profile of methyl ester derivatives of fatty acids, showed that Palmitic acid (35.41%), Oleic acid (10.91%), Stearic acid (5.31%), Margaric acid (5.13%), Behenic acid (5.18%) and Hexanoic acid (4.97%) were the major components in the isolated oily fraction, while rest of the other fatty acids were present in minor concentration. The literature revealed that no such work has been done for the determination of fatty acids in M. royleanus stem oil.     

Development and evaluation of gas and liquid chromatographic methods for the analysis of fatty amines

In contrast to the plethora of publications on the separation of fatty acids, analogous studies involving fatty amines are scarce. A recently introduced ionic‐liquid‐based capillary column for GC was used to separate trifluoroacetylated fatty amines focusing on the analysis of a commercial sample. Using the ionic liquid column (isothermal mode at 200°C) it was possible to separate linear primary fatty amines from C₁₂ to C₂₂ chain length in less 25 min with MS identification. The log of the amine retention factors are linearly related to the alkyl chain length with a methylene selectivity of 0.117 kcal/mol for the saturated amines and 0.128 kcal/mol for the mono‐unsaturated amines. The sp² selectivity for unsaturated fatty amines also could be calculated as 0.107 kcal/mol for the ionic liquid column. The commercial sample was quantified by GC with flame ionization detection (FID). An LC method also was developed with a reversed phase gradient separation using acetonitrile/formate buffer mobile phases and ESI‐MS detection. Native amines could be detected and identified by their single ion monitoring chromatograms even when partial coelution was observed. The analysis of the commercial sample returned results coherent with those obtained by GC–FID and with the manufacturer's data.     

Comprehensive chemical profiling of Guizhi Fuling capsule by the combined use of gas chromatography-mass spectrometry with a deconvolution software and rapid-resolution liquid chromatography quadrupole time-of-flight tandem mass spectrometry

Herbal formulations are complex natural mixtures. Researchers usually tend to focus more on analysis of nonvolatile components but pay less attention to volatile compounds. In this study, an analytical strategy combining two approaches was established for comprehensive analysis of herbal formulations. Guizhi Fuling capsule (GFC), a drug approved by the FDA to enter phase II clinical trial for treatment of primary dysmenorrhea, was taken as a case for analysis. Gas chromatography–mass spectrometry (GC‐MS) with automated mass spectral deconvolution and identification system (AMDIS) led to rapid identification of 48 volatile components including four acetophenones, three fatty acid esters, 13 phenylpropanoids and 19 sesquiterpenes. Most of them were found from Guizhi. The volatile oils of Guizhi have been proved to exhibit many pharmacological activities. This is helpful in understanding the pharmacological mechanism of GFC. Furthermore, AMDIS turned out to be efficient and reliable for analysis of complex herbal formulations. Rapid‐resolution liquid chromatography (RRLC) coupled with electrospray ionization quadrupole time‐of‐flight tandem mass spectrometry (ESI‐Q‐TOF MS/MS) allowed the identification of 70 nonvolatile components including six acetophenones, 12 galloyl glucoses, 31 monoterpene glycosides, three phenols and 12 triterpene acids. Fragmentation behaviors of assigned components, especially triterpene acids, which are hard to identify by low‐resolution MS, were first investigated by TOF MS/MS. Characteristic ions and typical loss of assigned triterpene acids were summarized. Combinatorial use of GC‐MS‐AMDIS and RRLC‐ESI‐Q‐TOF MS/MS could be of great help in global qualitative analysis of GFC, as well as other herbal products. Copyright © 2012 John Wiley & Sons, Ltd.     

Open Probe fast GC–MS — combining ambient sampling ultra‐fast separation and in‐vacuum ionization for real‐time analysis

An Open Probe inlet was combined with a low thermal mass ultra‐fast gas chromatograph (GC), in‐vacuum electron ionization ion source and a mass spectrometer (MS) of GC–MS for obtaining real‐time analysis with separation. The Open Probe enables ambient sampling via sample vaporization in an oven that is open to room air, and the ultra‐fast GC provides ~30‐s separation, while if no separation is required, it can act as a transfer line with 2 to 3‐s sample transfer time. Sample analysis is as simple as touching the sample, pushing the sample holder into the Open Probe oven and obtaining the results in 30 s. The Open Probe fast GC was mounted on a standard Agilent 7890 GC that was coupled with an Agilent 5977A MS. Open Probe fast GC–MS provides real‐time analysis combined with GC separation and library identification, and it uses the low‐cost MS of GC–MS. The operation of Open Probe fast GC–MS is demonstrated in the 30‐s separation and 50‐s full analysis cycle time of tetrahydrocannabinol and cannabinol in Cannabis flower, sub 1‐min analysis of trace trinitrotoluene transferred from a finger onto a glass surface, vitamin E in canola oil, sterols in olive oil, polybrominated flame retardants in plastics, alprazolam in Xanax drug pill and free fatty acids and cholesterol in human blood. The extrapolated limit of detection for pyrene is <1 fg, but the concentration is too high and the software noise calculation is untrustworthy. The broad range of compounds amenable for analysis is demonstrated in the analysis of reserpine. The possible use with alternate standard GC–MS and Open Probe fast GC–MS is demonstrated in the analysis of heroin in its street drug powder. The use of Open Probe with the fast GC acting as a transfer line is demonstrated in <10‐s analysis without separation of ibuprofen and estradiol. Copyright © 2017 John Wiley & Sons, Ltd.     

Determination of fatty acid methyl esters derived from algae Scenedesmus dimorphus biomass by GC–MS with one‐step esterification of free fatty acids and transesterification of glycerolipids

Algae can synthesize, accumulate and store large amounts of lipids in its cells, which holds immense potential as a renewable source of biodiesel. In this work, we have developed and validated a GC–MS method for quantitation of fatty acids and glycerolipids in forms of fatty acid methyl esters derived from algae biomass. Algae Scenedesmus dimorphus dry mass was pulverized by mortar and pestle, then extracted by the modified Folch method and fractionated into free fatty acids and glycerolipids on aminopropyl solid‐phase extraction cartridges. Fatty acid methyl esters were produced by an optimized one‐step esterification of fatty acids and transesterification of glycerolipids with boron trichloride/methanol. The matrix effect, recoveries and stability of fatty acids and glycerolipids in algal matrix were first evaluated by spiking stable isotopes of pentadecanoic‐2,2‐d₂ acid and glyceryl tri(hexadecanoate‐2,2‐d₂) as surrogate analytes and tridecanoic‐2,2‐d₂ acid as internal standard into algal matrix prior to sample extraction. Later, the method was validated in terms of lower limits of quantitation, linear calibration ranges, intra‐ and inter‐assay precision and accuracy using tridecanoic‐2,2‐d₂ acid as internal standard. The method developed has been applied to the quantitation of fatty acid methyl esters from free fatty acid and glycerolipid fractions of algae Scenedesmus dimorphus .     

Pressurized liquid extraction of mate tea leaves

The objective of this work is to investigate the influence of process parameters on the pressurized liquid extraction (PLE) of Ilex paraguariensis leaves. A factorial 2⁶⁻² experimental design was employed using responses as the extraction yield and the chromatographic profile of the extracts. The extraction time, polarity of solvent, amount of sample, numbers of PLE cycles, flushing volume and extraction temperature were selected as independent variables (factors). Results obtained indicated that the solvent polarity was the most significant variable in the study, while the amount of sample and extraction temperature also showed significant effect. The other variables did not present significant influence in the yield of extraction. GC/MS analysis of the extract enabled the identification of saturated hydrocarbons, fatty acids, fatty acid methyl esters, phytosterols and theobromine in the extracts. Quantitative analysis of four compounds presented in the extracts (caffeine, phytol, vitamin E and squalene) was performed by the GC/MS in the SIM mode.     

Classification of bacteria by simultaneous methylation–solid phase microextraction and gas chromatography/mass spectrometry analysis of fatty acid methyl esters

Direct methylation and solid-phase microextraction (SPME) were used as a sample preparation technique for classification of bacteria based on fatty acid methyl ester (FAME) profiles. Methanolic tetramethylammonium hydroxide was applied as a dual-function reagent to saponify and derivatize whole-cell bacterial fatty acids into FAMEs in one step, and SPME was used to extract the bacterial FAMEs from the headspace. Compared with traditional alkaline saponification and sample preparation using liquid–liquid extraction, the method presented in this work avoids using comparatively large amounts of inorganic and organic solvents and greatly decreases the sample preparation time as well. Characteristic gas chromatography/mass spectrometry (GC/MS) of FAME profiles was achieved for six bacterial species. The difference between Gram-positive and Gram-negative bacteria was clearly visualized with the application of principal component analysis of the GC/MS data of bacterial FAMEs. A cross-validation study using ten bootstrap Latin partitions and the fuzzy rule building expert system demonstrated 87 ± 3% correct classification efficiency.      

Improved fatty acid detection in micro-algae and aquatic meiofauna species using a direct thermal desorption interface combined with comprehensive gas chromatography-time-of-flight mass spectrometry

Comprehensive two-dimensional gas chromatography (GC x GC) with time-of-flight mass spectrometry detection is used to profile the fatty acid composition of whole/intact aquatic microorganisms such as the common fresh water green algae Scenedesmus acutus and the filamentous cyanobacterium Limnothrix sp. strain MRI without any sample preparation steps. It is shown that the technique can be useful in the identification of lipid markers in food-web as well as environmental studies. For instance, new mono- and diunsaturated fatty acids were found in the C(16) and C(18) regions of the green algae S. acutus and the filamentous cyanobacterium Limnothrix sp. strain MRI samples. These fatty acids have not, to our knowledge, been detected in the conventional one-dimensional (1D) GC analysis of these species due to either co-elution and/or their presence in low amounts in the sample matrix. In GC x GC, all congeners of the fatty acids in these microorganisms could be detected and identified due to the increased analyte detectability and ordered structures in the two-dimensional separation space. The combination of direct thermal desorption (DTD)-GC x GC-time-of-flight mass spectrometry (ToF-MS) promises to be an excellent tool for a more accurate profiling of biological samples and can therefore be very useful in lipid biomarker research as well as food-web and ecological studies.     

Fast GC for the analysis of fats and oils

Fast and conventional GC techniques were both applied to ten different lipidic matrices and the results then compared. The fats and oils were of fish, animal, and vegetable origin and were all simultaneously transesterified with acidic methanol before performing batch analysis of the fatty acid methyl esters (FAMEs) obtained. All FAMEs samples were consecutively analyzed three times by each method. The fast method significantly reduced the time required for analysis by a factor of 5 while maintaining a similar resolution. Furthermore, the reproducibility of relative quantitative data was measured on going from one method to the other. Peak identification was achieved through conventional GC‐MS in combination with linear retention index values contained in a home library and information derived from comprehensive 2D GC group patterns.     

Forensic identification of spilled biodiesel and its blends with petroleum oil based on fingerprinting information

A case study is presented for the forensic identification of several spilled biodiesels and its blends with petroleum oil using integrated forensic oil fingerprinting techniques. The integrated fingerprinting techniques combined SPE with GC/MS for obtaining individual petroleum hydrocarbons (aliphatic hydrocarbons, polyaromatic hydrocarbons and their alkylated derivatives and biomarkers), and biodiesel hydrocarbons (fatty acid methyl esters, free fatty acids, glycerol, monoacylglycerides, and free sterols). HPLC equipped with evaporative scattering laser detector was also used for identifying the compounds that conventional GC/MS could not finish. The three environmental samples (E1, E2, and E3) and one suspected source sample (S2) were dominant with vegetable oil with high acid values and low concentration of fatty acid methyl ester. The suspected source sample S2 was responsible for the three spilled samples although E1 was slightly contaminated by petroleum oil with light hydrocarbons. The suspected source sample S1 exhibited with the high content of glycerol, low content of glycerides, and high polarity, indicating its difference from the other samples. These samples may be the separated byproducts in producing biodiesel. Canola oil source is the most possible feedstock for the three environmental samples and the suspected source sample S2.     

Creation and evaluation of a two-dimensional contour plot of fatty acid methyl esters after off-line coupling of reversed-phase HPLC and GC/EI-MS

Fatty acid methyl esters obtained from a fish oil sample were fractionated by non-aqueous reversed-phase high-performance liquid chromatography (RP-HPLC) using three serially connected C₁₈-columns and pure methanol as the eluent. The HPLC fractions were analyzed by gas chromatography–electron ionization mass spectrometry in the selected ion monitoring mode. Data analysis and visualization was performed by the creation of a two-dimensional (2D) contour plot, in which GC retention times were plotted against the HPLC fractions. The 2D contour plot resulted in a full resolution of more than 120 fatty acids. The fatty acids were arranged on predictable lines and curves in dependence of the number of carbons and double bonds. The 2D contour plot enabled both the recognition of unknown fatty acids (which were found off the lines and curves) and the prediction of the coordinates of known fatty acids. Finally, selected HPLC fractions were subjected to further experiments (hydrogenation, silver ion fractionation, specific GC/MS measurements) in order to verify the structural assignments predicted from the 2D contour plot. All in all, the structures of over 100 FAs could be assigned to the peaks detected in the 2D contour plots.     

Determination of lipids in infant formula powder by direct extraction methylation of lipids and fatty acid methyl esters (FAME) analysis by gas chromatography.

Fatty acid methyl esters (FAMEs) of pure triglyceride standards, oils, and fat from dry matrixes were formed by transesterification using sodium methoxide in methanol-hexane. FAMEs were produced by direct addition of sodium methoxide-hexane to samples and heating to simultaneously extract and transesterify acyl lipids. FAMEs were quantitated by capillary gas chromatography (GC) over a fatty acid concentration range of 0 to 1.7 mg/mL (r > or = 0.9997). Total fat was calculated as the sum of individual fatty acids expressed as triglyceride equivalents, in accordance with nutrition labeling guidelines. Saturated, polyunsaturated, and monounsaturated fats were calculated as sums of individual free fatty acids. Absolute recoveries determined from individual fatty acids in test samples ranged from 69.7 to 106%. Recoveries (relative to the C13:0 internal standard) for individual fatty acids in test samples ranged from 95 to 106%. Reproducibility was constant at each fatty acid level in the reaction mixture (n = 5, coefficient of variation [CV] < 2%). Absolute recovery determined from the sum of total fatty acids in standard reference material (SRM) 1846 (powdered infant formula) was 96.4%. Analysis of SRM 1846 gave results that agreed closely with the certified fat and fatty acid values. Analysis of commercial infant formula gave results that were comparable to those obtained with AOAC Method 996.01. The direct extraction methylation procedure is rapid, and the transesterification of acyl lipids to form FAMEs is complete within 15 min. Classical saponification and refluxing are not required. This method provides FAMEs free of interferences and easily quantitated by GC or confirmed by GC/mass spectrometry (MS). Unambiguous MS identification of individual FAMEs derived from pure standards, SRM 1846, and powdered infant formula product was obtained.     

Evaluation of ionic liquid stationary phases for one dimensional gas chromatography-mass spectrometry and comprehensive two dimensional gas chromatographic analyses of fatty acids in marine biota

Ionic liquid stationary phases were tested for one dimensional gas chromatography-mass spectrometry (GC-MS) and comprehensive two dimensional gas chromatography (GC×GC) of fatty acid methyl esters from algae. In comparison with polyethylene glycol and cyanopropyl substituted polar stationary phases, ionic liquid stationary phases SLB-IL 82 and SLB-IL 100 showed comparable resolution, but lower column bleeding with MS detection, resulting in better sensitivity. The selectivity and polarity of the ionic liquid phases are similar to a highly polar biscyanopropyl-silicone phase (e.g. HP-88). In GC×GC, using an apolar polydimethyl siloxane×polar ionic liquid column combination, an excellent group-type separation of fatty acids with different carbon numbers and number of unsaturations was obtained, providing information that is complementary to GC-MS identification.     

Fast identification of mycobacterium species by GC analysis with trimethylsulfonium hydroxide (TMSH) for transesterification

Trimethylsulfonium hydroxide (TMSH) reproducibly converts fatty acids bound in, e.g., biomolecules such as phospholipids and/or glycerides, into the corresponding fatty acid methyl esters (FAMEs). The transesterification can be performed at room temperature in a fast single step reaction. Surprisingly, secondary alcohols and mycolic acid cleavage products (MACPs) are also released from mycobacteria under these conditions. The complex reaction mixtures containing FAMEs, MACPs, and secondary alcohols can easily be separated by high resolution temperature-programmed capillary GC. Different species of mycobacteria give rise to characteristic chromatographic patterns and the amount of lipids from a single colony of mycobacteria is sufficient for reliable identification of the bacteria. The profiles of the chromatograms match well those obtained from other sample preparation techniques. The TMSH method of identification of mycobacteria from the patterns of the gas chromatograms is faster and more sensitive than conventional methods, which also involve transesterification. The identification of mycobacterial species by microbiological culture techniques is difficult to perform and requires several weeks.     

A novel derivatization reagent possessing a bromoquinolinium structure for biological carboxylic acids in HPLC‐ESI‐MS/MS

A novel bromoquinolinium reagent, i.e. 1‐(3‐aminopropyl)‐3‐bromoquinolinium bromide (APBQ), was synthesized for the analysis of carboxylic acids. A simple and practical precolumn derivatization procedure using the APBQ in RP chromatography and MS (HPLC‐MS) has been developed using bile acids and free fatty acids, as the representative carboxylic acids in biological samples. The APBQ efficiently reacted with carboxylic acids at 60°C for 60 min in the presence of N,N‐dicyclohexylcarbodiimide and pyridine as the activation reagents. Because the APBQ possesses a bromine atom in the structure, the identification of a series of carboxylic acids was easily achieved due to the characteristic bromine isotope pattern in the mass spectra. The APBQ also has a quaternary amine structure, thus the positively charged derivatives are predominate for the highly sensitive detection of carboxylic acids. The APBQ was successfully applied to the selective determination of biological carboxylic acids in human plasma. The bile acids (chenodeoxycholic acid and deoxycholic acid) and several saturated (stearic acid and palmitic acid) and unsaturated free fatty acids (oleic acid and linoleic acid) were reasonably determined by HPLC‐MS under the proposed procedure. Based on the results of analyses of human plasma and saliva, the proposed procedure using APBQ seems to be applicable for the qualitative and quantitative analyses of a series of carboxylic acids in biological samples.     

Trans-esterification of fatty acids from microorganisms and human blood serum by trimethylsulfonium hydroxide (TMSH) for GC analysis

Summary Trimethylsulfonium hydroxide (TMSH) can convert fatty acids into the corresponding fatty acid methyl esters (FAMEs) in a single step. These fatty acids may also be bound in biomolecules such as phospholipids and/or glycerides. Complex mixtures of saturated and unsaturated FAMEs which may contain hydroxy and cylopropyl groups are obtained by trans-esterification; they can easily be separated in most cases by capillary GC. When FAMEs are generated from different microorganisms e.g. bacteria the patterns of the chromatograms are characteristic. Examples of characteristic patterns of bacteria with different cell wall structures are shown. The described method of transesterification can also be applied directly to blood serum without sophisticated sample pretreatment. The profiles of the chromatograms match well those described in the literature obtained by other methods of trans-esterification or sample preparation.     

Acquisition of deeper knowledge on the human plasma fatty acid profile exploiting comprehensive 2-D GC

The present research is focused on the use of comprehensive 2-D GC (GC x GC) for the elucidation of the human plasma fatty acid (FA) profile. The enhanced sensitivity, increased separation power and the formation of group-type patterns provided by GC x GC enabled the identification and quantification of a high number of both well known and unexpected FAs, for a total of 65 components. Peak assignment was, in most cases, supported by using pure standard compounds. The results attained demonstrated the usefulness of the multidimensional GC method in this fundamental field of research.     

全二维气相色谱-质谱法检测天然奶油和人造奶油中的脂肪酸

建立了天然奶油和人造奶油中37种脂肪酸的全二维气相色谱-质谱检测方法。样品经甲苯提取、乙酰氯-甲醇（1∶9,v/v）溶液甲酯化衍生后,以DB-5柱（30 m×0.25 mm×0.25 μm）为一维柱、BPX-50柱（2.5 m×0.1 mm×0.25 μm）为二维柱进行分离。升温程序为50℃保持2 min,以20℃/min升温至180℃,以2.5℃/min升温至250℃,以3℃/min升温至300℃,保持5 min。在调制周期为5 s、扫描范围为m/z 40~385的条件下,奶油中37种脂肪酸得到了有效分离和准确测定。将该方法应用于实际样品的分析,检测结果比传统的气相色谱法更灵敏,脂肪酸组成也更丰富,可有效鉴别不同种类奶油的差异成分。该方法不仅为奶油中脂肪酸成分分析提供了新的技术手段,同时在保障奶油的质量安全、鉴别掺假伪劣等过程中发挥重要作用。