Laser flash photolysis of aqueous acetaminophen solutions

The N-acetyl-4-aminophenoxyl radical, a supposed intermediate of the enzymatic oxidation of acetaminophen in living organisms, was prepared and studied by means of nanosecond laser flash photolysis. A number of important spectral-kinetic parameters of this species were determined, namely, the absorption coefficient at 440 nm ((4.2±0.2)×10³ l mol^?1cm^?1), the quantum yield of acetaminophen photoionization at 266 nm (φ= 0.03), and the rate constants for recombination (2k= (2.4±0.3))×10⁹ l mol^?1s^?1) and the reaction with the superoxide radical (k= (9±2))×10⁹ l mol^?1s^?1).     

An improved method for the spectrophotometric determination of fluoride by addition of sodium dodecyl sulphate to the fluoride/lanthanum (III)/Alizarin fluorine blue system

The conventional spectrophotometric method for the determination of fluoride, based on the fluoride/lanthanum(III)/alizarin fluorine blue ternary complex, is improved by addition of sodium dodecyl sulphate. In 15% (v/v) acetone medium, the absorbance of the binary reagent complex is decreased and the reaction time is only 3 min under sonication. Beer's Law is obeyed at 574 nm for fluoride concentrations in the ranges 0.075–0.30 and 0.20–1.2 mg 1^?1; the apparent molar absorptivities are (1.6 ± 0.1) × 10⁴ and (1.5 ± 0.1) × 10⁴ mol^?1 cm^?1 fluoride levels, respectively. This method is applied to the determination of fluoride in bottled mineral waters.     

Determination of thiabendazole in aqueous solutions using a cucurbituril-enhanced fluorescence method

The complexation of thiabendazole (TBZ) with the cucurbit[6]uril (Q[6]), cucurbit[7]uril (Q[7]) and symmetric tetramethyl-cucurbit[6]uril (TMeQ[6]) in aqueous solution has been investigated using UV–vis and fluorespectrometry. The experimental results show 1:1 host–guest inclusion complexes at pH 6.5 for all three macrocyclic hosts, and the corresponding formation constants by UV and fluorescence methods are (5.37?±?1.05)?×?10⁴?L?mol^?1 and (1.47?±?0.41)?×?10⁴?L?mol^?1 for the Q[6]-TBZ system (7.76?±?0.51)?×?10⁴?L?mol^?1 and (9.36?±?0.22)?×?10⁴?L?mol^?1 for the Q[7]-TBZ system (1.28?±?0.78)?×?10⁴?L?mol^?1 and (2.69?±?0.55)?×?10⁴?L?mol^?1 for the TMeQ[6]-TBZ system, respectively. Based on the enhancement of the fluorescence intensity of TBZ with the addition of Q[n]s in neutral media, a fluorespectrometry method for the determination of TBZ in aqueous solution in the presence of Q[n] was established. In the range of 6.0?×?10^?8?mol?L^?1–8.0?×?10^?6?mol?L^?1 a linear relationship was obtained between fluorescence intensity and TBZ concentration. The detection limit was found to be between 5.51 and 8.85?×?10^?9?mol?L^?1. The interference of coexisting ions was found to be slight. The proposed method has been successfully applied to the determination of TBZ in different aqueous solutions with satisfactory recoveries of 92–103%. The method seems to be suitable for environmental water analysis.     

A novel spectrophotometric method for determination of cyanide using cobalt (II) phthalocyanine tetracarboxylate as a chromogen

Cobalt (II) phthalocyanine tetracarboxylate [Co (II)Pc-COOH] has been prepared and used in aqueous solutions as a novel chromogenic reagent for the spectrophotometric determination of cyanide ion. The method is based on measuring the increase in the intensity of the monomer peak in the reagent absorbance at 682 nm due to the formation of a 1 : 2 [Co (II)Pc-COOH] : [CN] complex. The complex exhibits a molar absorptivity (ε) of 7.7 × 10⁴ L mol^?1 cm^?1 and a formation constant (K_f ) of 5.4 ± 0.01 × 10⁶ at 25 ± 0.1°C. Beer's law is obeyed over the concentration range 0.15–15 µg mL^?1 (5.8 × 10^?6–5.8 × 10^?4 M) of cyanide ion, the detection limit is 20 ng mL^?1 (7.7 × 10^?7 M) the relative standard deviation is ±0.7% (n = 6) and the method accuracy is 98.6 ± 0.9%. Interference by most common ions is negligible, except that by sulphite. The proposed method is used for determining cyanide concentration in gold, silver and chromium electroplating wastewater bath solutions after a prior distillation with 1 : 1 H₂SO₄ and collection of the volatile cyanide in 1 M NaOH solution containing lead carbonate as recommended by ASTM, USEPA, ISO and APAHE separation procedures. The results agree fairly well with potentiometric data obtained using the solid state cyanide ion selective electrode.     

Kinetics and mechanism of the oxidation of iron(II) ion by chlorine dioxide in aqueous solution

The mechanism by which an excess of iron(II) ion reacts with aqueous chlorine dioxide to produce iron(III) ion and chloride ion has been determined. The reaction proceeds via the formation of chlorite ion, which in turn reacts with additional iron(II) to produce the observed products. The first step of the process, the reduction of chlorine dioxide to chlorite ion, is fast compared to the subsequent reduction of chlorite by iron(II). The overall stoichiometry is The rate is independent of pH over the range from 3.5 to 7.5, but the reaction is assisted by the presence of acetate ion. Thus the rate law is given by At an ionic strength of 2.0 M and at 25°C, k_u = (3.9 ± 0.1) × 10³ L mol^?1 s^?1 and k_c = (6 ± 1) × 10⁴ L mol^?1 s^?1. The formation constant for the acetatoiron(II) complex, K_f, at an ionic strength of 2.0 M and 25°C was found to be (4.8 ± 0.8) × 10^?2 L mol^?1. The activation parameters for the reaction were determined and compared to those for iron(II) ion reacting directly with chlorite ion. At 0.1 M ionic strength, the activation parameters for the two reactions were found to be identical within experimental error. The values of ΔH? and ΔS? are 64 ± 3 kJ mol^?1 and + 40 ± 10 J K^?1 mol^?1 respectively. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 554–565, 2004     

Photocurrent kinetics at the electron emission from a metal into electrolyte solution: Part II. Solutions without acceptors and solutions of N2O,NO2−, NO3−

A method of measuring the kinetics of currents arising at the electron photoemission from a metal into electrolyte solution when affected by the u.v. laser pulses for 10^?8 s at the frequency of repetitions 10–25 Hz is described. Measurements have been taken in solutions without acceptors and in those containing N₂O and NO₂^?, NO₃^? ions as electron acceptors. The rate constants of capture of the solvated electrons by N₂O ((6±1)×0⁹ mol^?1 s^?1) and NO₂^? ((4.5±1)×10⁹ mol^?1 s^?1) and the diffusion coefficients of OH-radicals ((1.0±0.3)×10^?5 cm² s^?1) and of NO ((1.2±0.3)×10^?5 cm² s^?1) are found. The oxidation rate of NO₃^2? has been shown to decrease from 40 cm s^?1 in the range of potentials ?0.55 to ?1.0 V. The rate constant of bimolecular recombination of the solvated electrons ((1.3±0.4)×10¹⁰ mol^?1 s^?1) has been found from the dependence of the emitted charge on the light intensity.     

A multivariate calibration procedure for the tensammetric determination of detergents

A multivariate calibration procedure based on singular value decomposition (SVD) and the Ho-Kashyap algorithm is used for the tensammetric determination of the cationic detergents Hyamine 1622, benzalkonium chloride (BACl), N-cetyl-N,N,N-trimethylammonium bromide (CTABr) and mixtures of CTABr and BACl. The sensitivity and accuracy depend strongly on the nature of the detergent. Acceptable accuracy is obtained with a two-step calculation procedure in which calibration constants for the total concentration range of interest are used to guide the choice of a more specific set of calibration constants which are valid for a much smaller concentration span. For Hyamine 1622, concentrations in the range 5 × 10^?6?2 × 10^?4 M could be determined with an accuracy of ± 10^?6 M. For CTABr, these numbers were 3 × 10^?6?2 × 10^?4 M and ± 5 × 10^?7 M; for BACl, they were 2 × 10^?3?9 × 10^?2 g l^?1 and ± 1 × 10^?3 g l^?1. In the mixtures of CTABr and BACl, the accuracies were ± 3 × 10^?6 M and × 1 × 10^?3 g l^?1, respectively.     

A pulse radiolysis study of the reactions of the hydrated electron and hydroxyl radical with the oxalate ion in neutral aqueous solution

The rate constants of the reactions of e _aq ^? and the OH^· radical with the oxalate ion in a neutral aqueous solution were measured by means of the pulse radiolysis technique. They were found to be (3.5 ± 0.5) × 10⁷ and (1.5 ± 0.2) × 10⁷ l mol^?1 s^?1, respectively. The radical anion ^?OOC-C^·OO^2? is characterized by an optical absorption band that has a maximum at 270 nm and a molar absorption coefficient of (2400 ± 200) l mol^?1 cm^?1. The radical anion ^·OOC-COO^?, the product of the reaction with the OH^· radical, exhibits absorption that has no maximum and increases in intensity with a decrease in the wavelength extending to the UV region (?₂₂₀ = 1800 l mol^?1 cm^?1). The mechanism of radiation-chemical transformations in aqueous oxalate solutions is discussed.     

Chemical constituents of Fumaria densiflora and the effects of some isolated spirobenzylisoquinoline alkaloids on murine isolated ileum and perfused heart

Abstract

Twenty-two alkaloids, were isolated from Fumaria densiflora. Two of these alkaloids, N-methyl-5-hydroxystylopine chloride and fumaricine N-oxide, were isolated for the first time from natural sources. Parfumine and fumaritine, in concentrations ranging from 3?×?10^?7 to 9?×?10^?4?M, caused concentration–dependent relaxation of ileum longitudinal segment. Also, parfumine and fumaritine in concentrations ranging from 3?×?10^?4 to 9?×?10^?2?M, caused concentration – dependent decrease in heart rate of the isolated perfused heart. A concentration of parfumine of 3?×?10^?2?M increased but a higher concentration (9?×?10^?2?M) decreased the amplitude of contraction of the isolated perfused heart. On the other hand, fumaritine, in concentrations ranging from 3?×?10^?4 to 3?×?10^?2?M, caused concentration – dependent increase, but a higher concentration (9?×?10^?2?M) caused a decrease in the amplitude of contraction of the isolated perfused heart.

     

A consistent model for the thermal decomposition of NCN3 and the singlet– triplet relaxation of NCN

The thermal decomposition of cyanogen azide (NCN₃) and the subsequent collision‐induced intersystem crossing (CIISC) process of cyanonitrene (NCN) have been investigated by monitoring excited electronic state ¹NCN and ground state ³NCN radicals. NCN was generated by the pyrolysis of NCN₃ behind shock waves and by the photolysis of NCN₃ at room temperature. Falloff rate constants of the thermal unimolecular decomposition of NCN₃ in argon have been extracted from ¹NCN concentration–time profiles in the temperature range 617 K <T< 927 K and at two different total densities: k(ρ ≈ 3 × 10^?6 mol/cm³)/s^?1=4.9 × 10⁹ × exp (?71±14 kJ mol^?1/RT) (± 30%); k(ρ ≈ 6 × 10^?6 mol/cm³)/s^?1=7.5 × 10⁹ × exp (‐71±14 kJ mol^?1/RT) (± 30%). In addition, high‐temperature ¹NCN absorption cross sections have been determined in the temperature range 618 K <T< 1231 K and can be expressed by σ /(cm²/mol)= 1.0 × 10⁸ ?6.3 × 10⁴ K^?1 × T (± 50%). Rate constants for the CIISC process have been measured by monitoring ³NCN in the temperature range 701 K <T< 1256 K resulting in k_CIISC (ρ ≈ 1.8 ×10^?6 mol/cm³)/ s^?1=2.6 × 10⁶× exp (‐36±10 kJ mol^?1/RT) (± 20%), k_CIISC (ρ ≈ 3.5×10^?6 mol/cm³)/ s^?1 = 2.0 × 10⁶ × exp (?31±10 kJ mol^?1/RT) (± 20%), k_CIISC (ρ ≈ 7.0×10^?6 mol/cm³)/ s^?1=1.4 × 10⁶ × exp (?25±10 kJ mol^?1/RT) (± 20%). These values are in good agreement with CIISC rate constants extracted from corresponding ¹NCN measurements. The observed nonlinear pressure dependences reveal a pressure saturation effect of the CIISC process. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 45: 30–40, 2013     

Kinetics and Mechanism of the Reduction of Sodium Chlorite by Sodium Hydrogen Ascorbate in Aqueous Solution at Near Neutral pH

The reduction of chlorite ion by the hydrogen ascorbate ion in a neutral solution safely produces chlorine dioxide. The decrease in absorbance at 268 nm with the presence of dimethyl sulfoxide (DMSO) allows measurement of the ascorbate disappearance in the reaction with excess chlorite. The measured rate constant at 25 ± 0.02°C, 3.67 × 10^?4 M DMSO, ionic strength 0.51 M (NaClO₄), and in the presence of 3.32 × 10^?9 M ethylenediaminetetraacetic acid is 13.81 ± 1.30 M^?1 s^?1. Rate constant measurements over the range 15–35°C gave an Arrhenius activation energy of 75.51 ± 4.53 kJ mol^?1. This result is the first reported determination of the kinetics of this reaction and is consistent with either electron‐ or oxygen‐transfer mechanisms. Anomalously, reduction of chlorite results in its oxidation, because intermediate hypochlorite oxidizes chlorite.     

Spectrophotometric Assay of Penem (SCH 29482) by Reaction with Imidazole

Abstract

A rapid method is described for the determination of SCH 29482. This is based on the spectrophotometric measurement at 386 nm of the product of reaction with imidazole formed at 35°Cin a 1.5 M imidazole and 2×10^?3M mercuric chloride solution at pH 7.50. The method, which permits detection of concentrations of SCH 29482 as low as to 2.8, μg/ml, is reproducible and specific for intact SCH 29482 in the presence of degradation products. The molar absorptivity for the chromophore formed is 2.54×l0⁴ I mol^?1cm^?1.     

Polymerization of acrylamide initiated by the Ce4+/thiourea redox system

The polymerization of acrylamide (M) initiated by the Ce⁴⁺/thiourea (TU) redox system has been studied in an aqueous sulfuric acid medium at 35 ± 0.2°C under nitrogen atmosphere. The rate of polymerization is governed by the expression The activation energy is 5.9 kcal deg^?1 mol^?1 in the investigated temperature range 30–50°C. The molecular weight is directly proportional to the concentration of monomer and inversely proportional to the catalyst concentration. With increasing concentration of DMF molecular weight decreases. The range of concentrations for which these observations hold at sulfuric acid concentration of 2.5 × 10^?2 mol/L are [monomer] = 5.0 × 10^?2–3.0 × 10^?1, [catalyst] = (5.0–15.0) × 10^?4, and [activator] = (1.0–6.0) × 10^?3 mol/L.     

Determination of chlorite at very low levels by using differential pulse polarography

A method is reported for the determination of μgl^?1 levels of chlorite by using differential pulse polarography. The electrochemical reduction of chlorite was studied between pH 3.7 and 14 and in an ionic strength range of 0.05–3.0 M. The optimum conditions are pH 4.1–4.4 and an ionic strength of 0.45 M. The current under these conditions is diffusion-controlled and is a linear function of chlorite concentration ranging from 2.77×10^?7 to 2.80×10^?4 M (19 μgl^?1 to 19 mg l^?1). The imprecision is better than ±1.0% and ±3.4% at concentrations of 2.87×10^?5 M and 1.74×10^?6M, respectively, with a detection limit of 1×10^?7 M (7μgl^?1). An interference study and the application of this method for determining chlorite in drinking water are reported.     

A Solid Film Electrode of Intermetallic Ag2Hg3.02 for the Direct Determination of Folic Acid in Fresh and Processed Fruit Juices

AgSIE was used for the direct analysis of folic acid (FA), with a detection limit and lower level of quantitation of 6.8×10^?10 mol L^?1 and 2.3×10^?8 mol L^?1. The analysis in fresh and processed fruits was done without any sample pretreatment. In strawberry and acerola juices, FA concentration level values were below the method detection limit. FA was detectable in peach (77.7±0.4 µg L^?1 and 64.4±0.5 µg L^?1), Persian lime (45.4±0.7 µg L^?1), pineapple Hawaii (66.2±0.4 µg L^?1), pear pineapple (35.3±0.6 µg L^?1), cashew (54.4±0.5 µg L^?1), passion fruit (73.2±0.3 µg L^?1), and apple (84.4±0.5 µg L^?1).     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

Effects of pure AcOH and mixed AcOH–CS (CS?=?CH3CN and THF) solvents on the rate of cleavage of phthalic anhydride (PAn)

The values of pseudo-first-order rate constants (k _obs) for the acetolysis of phthalic anhydride (PAn) increase from 6.60?×?10^?7 to 31.5?×?10^?7?s^?1 with the increase in temperature from 30 to 50?°C. These values of k _obs give activation parameters ?H* and ?S* as 14.4?±?0.4?kcal?mol^?1 and ?39.1?±?1.3?cal?K^?1?mol^?1, respectively. The values of k _obs remain essentially unchanged with the increase in the content of CS (CS?=?CH₃CN or THF) from 0 to 40?% v/v in mixed AcOH?CCS solvents. These observations have been explained qualitatively.     

Investigation of the Removal of Lead by Adsorption onto 1‐(2‐Thiazolylazo)‐2‐Naphthol (TAN) Imbedded Polyurethane Foam from Aqueous Solution

A new preconcentration method is presented for lead on TAN‐loaded polyurethane foam (PUF) and its measurement by differential pulse anodic stripping voltammetry (DPASV). The optimum sorption conditions of 1.29 × 10^?5 M solution of Pb(II) ions on TAN‐loaded PUF were investigated. The maximum sorption was observed at pH 7 with 20 minutes equilibrated time on 7.25 mg mL^?1 of TAN‐loaded foam. The kinetic study indicates that the overall sorption process was controlled by the intra‐particle diffusion process. The validity of Freundlich, Langmuir and Dubinin ‐ Radushkevich adsorption isotherms were tested. The Freundlich constants 1/n and K_F are evaluated to be 0.45 ±0.04 and (1.03 +0.61) × 10^?3 mol g^?1, respectively. The monolayer sorption capacity and adsorption constant related to the Langmuir isotherm are (1.38 ± 0.08) × 10^?5 mol g^?1 and (1.46 ± 0.27) × 10⁵ L mol^?1, respectively. The mean free energy of Pb(II) ions sorption on‐TAN loaded PUF is 11.04 ± 0.28 kJ mol^?1 indicating chemisorption phenomena. The effect of temperature on the sorption yields thermodynamics parameters of ΔH, ΔS and ΔG at 298 K that are 15.0 ± 1.4 kJ mol^?1, 74 ±5 J mol^?1 K^?1 and ‐7.37 ± 0.28 kJ mol^?1, respectively. The positive values of enthalpy (ΔH) and entropy (ΔS) indicate the endothermic sorption and stability of the sorbed complexes are entropy driven. However, the negative value of Gibb's free energy (ΔG) indicates the spontaneous nature of sorption. On the basis of these data, the sorption mechanism has been postulated. The effect of different foreign ions on the sorption and desorption studies were also carried out. The method was successfully applied for the determination of lead from different water samples at ng levels.     

Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

Spectrophotometric Determination of Zinc in Pharmaceutical and Biological Samples with Di‐2‐pyridyl Ketone Benzoylhydrazone: a Simple,Fast, Accurate and Sensitive Method

Abstract

A simple, fast, accurate, and sensitive spectrophotometric method was developed to determine zinc(II). This method is based on the reaction of Zn(II) with di‐2‐pyridyl ketone benzoylhydrazone (DPKBH), at pH=5.5 and 50% (v/v) ethanol. Bee?s law was obeyed in the range 0.020–1.82 µg mL^?1 with a molar apsorptivity of 3.64×10⁴ L mol^?1 cm^?1, and a detection limit (3δ) of 2.29 µg L^?1. The action of some interfering ions was verified and the developed method applied to pharmaceutical and biological samples. The results were then compared with those obtained by using a flame atomic absorption technique.