Kinetics of malachite green fading in water–ethanol–2‐propanol ternary mixtures

The rate constant of malachite green (MG⁺) alkaline fading was measured in water–ethanol–2‐propanol ternary mixtures. This reaction was studied under pseudo‐first‐order conditions at 283–303 K. It was observed that the observed reaction rate constants, k_obs, were increased in the presence of different weight percentages of ethanol and 2‐propanol. The fundamental rate constants of MG⁺ fading in these solutions were obtained by using the SESMORTAC model. In each series of experiments, the concentration of one alcohol was kept constant and the concentration of the second one was changed. It was observed that at the constant concentration of one alcohol and variable concentrations of the second one, with an increase in temperature, k₂ values decrease according to the trend of hydroxide ion nucleophilic parameter values and k₁ values increase. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 441–453, 2011     

Indomethacin: A NSAID sensitive to micro heterogeneity in alcohol–water mixtures

UV–vis absorption, steady state and time resolved fluorescence studies on the photo physical behavior of indomethacin, a traditional NSAID in binary water ethanol mixtures have been presented. Our results reveal that indomethacin can sense the micro heterogeneity in the binary mixtures forming ground state fluorescent complex with two predominant types of clusters viz. ethanol self-association clusters and hydrogen bonded water clusters.     

Influence of surfactants on the fading of malachite green

The kinetics of the reaction between malachite green (MG) and sodium hydroxide (MG fading) was studied using a spectrophotometric method in the presence of two cationic surfactants, cetyl-benzyl-dimethyl-ammonium chloride (CBDAC) and hexadecyl-trimethylammonium bromide (HTAB) and one anionic surfactant, sodium dodecyl sulphate (SDS) at concentrations below and above critical micellar concentrations. The cationic surfactants have a catalytic effect, while the anionic surfactant has an inhibitory effect on the reaction. A kinetic model describing the influence of surfactant on reaction rate was developed. The results are discussed on the basis of electrostatic and hydrophobic interactions between the kinetic micelles and malachite green.      

Conformation of poly(methacrylic acid) in alcohol–water mixtures. III. Dependence on molecular weight

Poly(methacrylic acid) has been studied in 0.002N HCl–ethanol mixtures as a function of molecular weight. A different dependence on molecular weight is noted at different alcohol concentrations. Since the intrinsic viscosity passes through a series of extrema with changes in alcohol concentration, the dependence on molecular weight has been considered in two regions of alcohol concentration in particular. The region of the first minimum and the region of the second minimum (or overall maximum). In the region of the first minimum, intrinsic viscosity is proportional to M^½, just as in 0.002N HCl. The Huggins coefficient k′ is large (ca. 60) but drops to about 10 when the molecular weight exceeds 320,000. In the region of the second minimum the dependence on molecular weight is complex. Intrinsic viscosity is proportional to molecular weight both at low and at high molecular weight and thus indicates freely draining structures. There is a conformational contraction, however, at molecular weight about 320,000 leading from one type of structure to the other. The structure at higher molecular weight may involve a specially strong bond between specifically grouped segments in the chain. The positions of the extrema along the alcohol concentration axis are not molecular weight dependent, particularly above 320,000. Results available for molecular weight dependence in methanol agree well with this picture. The present results confirm prediction inherent in the model of Silberberg and Priel and Silberberg.     

Relative strength of hydrogen bond interaction in alcohol–water complexes

Hydrogen binding energies are calculated for the different isomers of 1:1 complexes of methanol, ethanol and water using ab initio methods from MP2 to CCSD(T). Zero-point energy vibration and counterpoise corrections are considered and electron correlation effects are analyzed. In methanol–water and ethanol–water the most stable heterodimer is the one where the water plays the role of proton donor. In methanol–ethanol the two isomers have essentially the same energy and no favorite heterodimer could be discerned. The interplay between the relative binding energy is briefly discussed in conjunction with the incomplete mixing of alcohol–water systems.     

Synthesis of carboxyl‐functionalized magnetic nanoparticles for adsorption of malachite green from water: Kinetics and thermodynamics studies

Magnetic carboxyl‐coated silica iron oxide nanoparticles (Fe₃O₄@SiO₂‐COOH NPs) were successfully synthesized, characterized, and then applied as a nano‐adsorbent for removal of malachite green (MG) from aqueous solutions. According to the experimental results, about 97.5% of MG could be removed from aqueous solutions using an adsorbent amount of 0.5 g/L at pH = 9 in 120 min. The kinetics and equilibrium adsorptions is well‐described by the pseudo‐second‐order kinetics and Langmuir model with the maximum absorption capacity of 263.16 mg/g, respectively. Thermodynamic studies showed that the adsorption of the hazardous MG dye was spontaneous and endothermic with a random process.     

Conformation of poly(methacrylic acid) in alcohol–water mixtures. II. Methanol,ethanol, n-propanol,and 1,2-ethanediol

The intrinsic viscosity of poly(methacrylic acid) has been studied in mixtures of 0.002N HCI and a series of aliphatic alcohols. The behavior found previously with ethanol is shown to apply in the case of admixture with methanol, n-propanol, and 1,2-ethanediol. The intrinsic viscosity first drops to a minimum and then increases sharply to a maximum. With ethanol and n-propanol the maximum is followed by another minimum and maximum. With methanol and 1,2-ethanediol this effect is absent or much smaller. Methanol and 1,2-ethanediol are equivalent, molecule for molecule, in their influence on the intrinsic viscosity. With ethanol and n-propanol there are in addition one and two shoulders, respectively, in the passage from the first minimum to the first maximum. Good correlation of the data is obtained if alcohol concentration is plotted as the mole fraction of carbon atoms per OH group (in the alcohol). The first maximum in particular was shown to correspond to the point where the number of water molecules per alcohol in the solvent mixture equals the number of C atoms per hydroxyl in the alcohol. The shoulders and first minima were found to correspond to other simple ratios. This behavior reflects changes in alcohol–water structure. The maximum in the case of ethanol was found to be the most pronounced and ethanol seems to possess optimal properties from this point of view.     

Solute–solvent interaction effects on second‐order rate constants of reaction between 1‐chloro‐2,4‐dinitrobenzene and aniline in alcohol–water mixtures

The second‐order rate coefficients for aromatic nucleophilic substitution reaction between 1‐chloro‐2,4‐dinitrobenzene and aniline have been measured in aqueous solutions of ethanol and methanol at 25°C. The plots of rate constants versus mole fraction of water show a maximum in all‐aqueous solutions. The effect of four empirical solvent parameters including hydrogen bond donor acidity (α) dipolarity/polarizability (π^*) normalized polarity (E^N_T) and solvophobicity (Sp) has been investigated. This investigation has been carried out by means of simple and multiple regression models. A dual‐parameter equation of log k₂ versus Sp and α was obtained in all‐aqueous solutions (n = 41, r = 0.962, s = 0.053, p = 0.0000). This equation shows that solvophobicity and hydrogen bond donor acidity are important factors in the occurrence of the reaction and they have opposite effects on reaction rate. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 37: 90–97, 2005     

Membrane permeation of water—alcohol binary mixtures

The permeability and selectivity of nylon-6, cellophane, and cellulose 2.5-acetate membranes toward binary mixtures of aliphatic alcohols and water were studied at 60°C. Commercial membranes made of the above materials were used with and without preswelling. The cellophane membranes swelled considerably more than the other types of membranes in both water and in aqueous isopropanol mixtures containing over 40 mole% H₂O. Therefore, the effects of swelling on membrane permeability were examined in some detail with cellophane membranes. The permeability characteristics of cellophane membranes could be altered significantly by suitable pretreatment. The effects of pretreatment are negligible in the case of cellulose 2.5-acetate and nylon-6 membranes.     

Kinetics and mechanism of oxidation of sugars by quinquevalent vanadium in binary mixture solvents of DMSO–water and acetic acid–water in H2SO4 medium

The kinetics of oxidation of aldosugars and ketosugar by quinquevalent vanadium in binary mixtures of DMSO–water and acetic acid–water in sulfuric acid medium have been studied. The reaction is first order in both oxidant and substrate. The effect of acidity on the reaction kinetics has been determined. The effect of acidity shows a clear difference. The ketose has a unit dependence, whereas aldoses have a 0.5 dependence in H₀. The role of solvent in these reactions has also been studied, and the effect of temperature on these reactions has been determined. A suitable mechanism has been postulated taking all the observed facts into consideration.     

Picosecond dynamics of conformation changes in malachite green dye produced by photoionization of malachite green leucocyanide

The appearance of malachite green dye absorption following photoionization of malachite green leucocyanide has been examined using picosecond flash photolysis. The rate of absorption increase depends upon solvent viscosity and exhibits a two-step behavior in viscous glycerol solutions.     

Kinetics of the reaction of malachite green and crystal violet with formally aprotic solvents

The stability of malachite green and crystal violet has been studied spectrophotometrically in 17 formally aprotic media. The cations of these compounds react with solvents that are Lewis bases; the pseudo-first order rate constant values (k') are dependent on Gutmann's donor numbers. The sensitivity of the two dyes to the solvent effect correlates with the net charge on their central carbon atoms.     

Indirect determination of cefradine with n-propyl alcohol–ammonium sulfate–water system by extraction–flotation of cuprous thiocyanate

A new method was developed for the determination of cefradine by extraction-flotation of CuSCN. The experiment indicated that in the presence of 0.20 mol/L NaOH the degradation of cefradine took place in water bath at 100 ℃. The thiol group （-SH） of the degradation product could reduce Cu（Ⅱ） to Cu（Ⅰ） for the formation of the emulsion CuSCN in the presence of NH4SCN at pH 4.0. By determining the residual amount of Cu（Ⅱ） in the solution and calculating the flotation yield of Cu（Ⅱ）, the indirect determination of cefradine can be obtained. This method has been applied to determine cefradine in capsules, human serum and urine samples, respectively.     

Conformation of poly(methacrylic acid) in alcohol–water mixtures. I. Effect of concentration,temperature, pH,and ionic strength

The reduced specific viscosity of poly(methacrylic acid) has been studied in ethanol–0.002N HCI solvent mixtures as a function of polymer concentration, alcohol concentration, and temperature. In addition, experiments were performed at different HCI concentrations and with KCI instead of HCI. Both intrinsic viscosity and Huggins coefficient were shown to undergo unusually strong variations. Two minima and two maxima could be demonstrated in intrinsic viscosity. The Huggins coefficient seems to show corresponding variations. The first minimum in intrinsic viscosity indicates that the coil volume has collapsed almost to an Einstein sphere. In this region the Huggins coefficient is extremely large (of order 10²) and is controlled by coil association. It was shown that several forms of intramolecular interaction must be assumed to be competing to account for this behavior. The presence of HCI, particularly in the preponderantly aqueous phase, is required to suppress the polyelectrolyte effect. It is found, however, that the behavior of the solutions at relatively high ethanol concentrations is more sensitive to HCI content than is that of highly aqueous solutions. KCI can be used to replace HCI over most of the range. Increase in temperature shifts the turning points of the curves to lower alcohol concentrations. Some evidence has been found that the association constant giving rise to dimers increase with rate of shear. The importance of poly(methacrylic acid) as a chemically simple model substance for various biopolymer effects is stressed.     

An investigation of water dynamics in binary mixtures of water and dimethyl sulfoxide

The motion of water molecules in mixtures of water and d6-dimethyl sulfoxide (DMSO) has been explored through molecular dynamics (MD) simulations using the SPC/E water model (J. Chem. Phys. 1987, 91, 6269) and the P2 DMSO model (J. Chem. Phys. 1993, 98, 8160). We evaluate the self-intermediate scattering functions, FS(Q,t), which are related by a Fourier transform to the incoherent structure factors, S(Q,omega), measured in quasielastic neutron scattering (QNS) experiments. We compare our results to recent QNS experiments on these mixtures reported by Bordallo et al. (J. Chem. Phys. 2004, 121, 12457). In addition to comparing the MD data to the experimental signals, which correspond to a convolution of S(Q,omega) with a resolution function, we examine the rotational and translational components of FS(Q,t) and investigate to what extent simulation results for the single-molecule dynamics follow the dynamical models that are used in the analysis of the experimental data. We find that the agreement between the experimental signal and the MD data is quite good and that the portion of FS(Q,t) due to translational dynamics is well represented by the jump-diffusion model. The model parameters and their composition dependence are in reasonable agreement with experiment, exhibiting similar trends in water mobility with composition. Specifically, we find that water motion is less hindered in water-rich and water-poor mixtures than it is near equimolar composition. We find that the extent of coupling between rotational and translational motion contributing to FS(Q,t) increases as the equimolar composition of the mixture is approached. Thus, the decoupling approximation, which is used to extract information on rotational relaxation from QNS spectra at higher momentum transfer (Q) values, becomes less accurate than that in water-rich or DMSO-rich mixtures. We also find that rotational relaxation deviates quite strongly from the isotropic rotational diffusion model. We explore this issue further by investigating the behavior of orientational time correlations for different unit vectors and corresponding to Legendre polynomials of orders 1-4. We find that the rotational time correlations of water molecules behave in a way that is more consistent with the extended jump rotation model recently proposed by Laage and Hynes (Science 2006, 311, 832).     

Picosecond recovery dynamics of malachite green

Using sub-picosecond pulses from a mode-locked cw dye laser we have studied ultra-fast absorption recovery in the triphenylmethane dye malachite green after excitation to the first singlet. In methanol an exponential time constant of 2.1 ps is measured. As solvent viscosity is increased recovery becomes slower and a two component relaxation is evident.     

Polymer–monomer binary mixtures. I. Eutectic and epitaxial crystallization in poly(ϵ-caprolactone)–trioxane mixtures

Binary mixtures of a linear polyester (poly(?-caprolactone)) and a crystallizable monomer (trioxane) have been investigated by means of differential scanning calorimetry and optical and electron microscopy. The phase diagram indicates the existence of a eutectic at a temperature T_mE = 314°K and for a polymer volume fraction ?_2E = 0.70, values close to those predicated by the Flory–Huggins theory (using χ = 0.3). Microscopic studies reveal unusual morphologies: (1) In hypoeutectic mixtures, at room temperature, the solvent crystallizes as highly ramified or branched needles. When the remaining melt reaches the eutectic composition, transcrystallization of the polymer is induced by the epitaxial deposition (as established by electron diffraction) of polycaprolactone on the existing trioxane crystals, and leads to highly ordered structures. (2) In hypereutectic mixtures a predominantly spherulitic texture is observed. Blends of trioxane and several other linear polyesters are found to exhibit similar behavior.     

酶联免疫吸附分析法测定水产品及水中孔雀石绿和无色孔雀石绿

本文报道一种同时测定水产品及水样中孔雀石绿(MG)和无色孔雀石绿(LMG)的间接竞争酶联免疫吸附分析法。对无色孔雀石绿分子进行修饰,使其与载体蛋白交联,得到免疫原和包被抗原,经过多次免疫动物制得抗无色孔雀石绿的多克隆抗体。在优化的实验条件下,IC50值(标准曲线中吸光度抑制至最大吸光度值的50%时所对应的待测物浓度)为0.9~2.6μg/L,检出限为0.02~0.10μg/L,无色孔雀石绿在水样及水产品中的回收率为76.2~95.0%,与孔雀石绿的交叉反应率为95.25%。真实样品测定中,两种食用鱼养殖水样及一个鱼样中未检出孔雀石绿和无色孔雀石绿,但在观赏鱼养殖水样及另一鱼样中检出孔雀石绿和无色孔雀石,浓度分别为1.84μg/L和1.38μg/L。     

Isothermal vapor–liquid equilibria for different binary mixtures involved in the alcoholic distillation

Isothermal vapor–liquid equilibrium (VLE) data for five binary systems ethyl acetate + 3-methyl-1-butanol, ethanol + 3-methyl-1-butanol, ethyl acetate + 2-methyl-1-butanol, ethanol + 2-methyl-1-butanol, ethyl acetate + 2-methyl-1-propanol, involved in the alcoholic distillation have been determined experimentally by headspace gas chromatography. The composition in the liquid phase was corrected with the help of an iterative method by means of a G^E model. However, due to the large density difference between the liquid and the vapor, the correction of the liquid phase composition is nearly negligible. All the binary mixtures show positive deviations from Raoult's law. The experimental VLE data are well predicted by using the modified UNIFAC model (Dortmund).