Analysis of Dual Diffusion and Non-linear Adsorption Isotherm with a Time Lag Method

This paper presents an application of the time lag method in the analysis of an adsorption system, where dual diffusion mechanism is assumed to exist and the equilibrium relationship between the fluid and adsorbed phases is non-linear. The derived time lag is expressed in terms of system parameters and operating conditions in the form of a quadrature. The feature of this solution is that the relative contribution of the pore and surface diffusions is a strong function of upstream pressure when the time lag experiment is operated over the non-linear range of the adsorption isotherm. It is this nice feature that we take advantage of to determine the pore and surface diffusivities without resorting to isolation of the pore diffusion by using non-adsorbing gas as a reference, as usually done in many other work. This advantage is not manifested in linear systems where the relative contribution of the pore and surface diffusions is a constant, rendering the delineation of these two processes impossible. Effects of various parameters on the utility of this time lag method are discussed in this paper, and application of the method is demonstrated with experimental data of sulfur dioxide adsorption onto Carbolac carbon (Proc. Roy. Soc., A271, 1–18, 1963).     

Ox-SLIM: Synthesis of and Site-Specific Labelling with a Highly Hydrophilic Trityl Spin Label

The combination of pulsed dipolar electron paramagnetic resonance spectroscopy (PDS) with site-directed spin labelling is a powerful tool in structural biology. Rational design of trityl-based spin labels has enabled studying biomolecular structures at room temperature and within cells. However, most current trityl spin labels suffer either from aggregation with proteins due to their hydrophobicity, or from bioconjugation groups not suitable for in-cell measurements. Therefore, we introduce here the highly hydrophilic trityl spin label Ox-SLIM. Engineered as a short-linked maleimide, it combines the most recent developments in one single molecule, as it does not aggregate with proteins, exhibits high resistance under in-cell conditions, provides a short linker, and allows for selective and efficient spin labelling via cysteines. Beyond establishing synthetic access to Ox-SLIM, its suitability as a spin label is illustrated and ultimately, highly sensitive PDS measurements are presented down to protein concentrations as low as 45 nm resolving interspin distances of up to 5.5 nm.     

Diffusion and partition coefficients of small organic solvents in molten miscible polymer blends: Correlations with thermodynamic interactions

The transport properties of small organic molecules in molten poly(vinyl chloride) (PVC)/atactic poly(methyl methacrylate) (PMMA) blends and their homopolymers were studied with inverse gas chromatography. The elution profiles resulting from various organic solvents and different experimental conditions were used for measuring diffusion and partition coefficients. With the van Deemter equation and retention volumes at infinite dilution, diffusion coefficients of 10^?7 to 10^?8 cm²/s and partition coefficients of 10–50 were calculated. The dependence of the diffusion and partition coefficients on experimental variables such as the blend concentration, temperature, and solute nature was examined. The presence of PMMA in PVC blends affected the sorption behavior of the PVC matrix up to a certain concentration. Beyond that, it was hard to derive any composition–diffusivity dependence. On the contrary, the diffusion and partition coefficients were greatly influenced by changes in the temperature and by the nature of the solute. For those solutes (e.g., chlorinated hydrocarbons) showing stronger interactions with polymer blends (higher negative values for the Flory–Huggins interaction parameter χ₁₍₂₃₎), higher diffusion and partition coefficients were obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 267–279, 2004     

Physico-Mathematical Model of the Gas Flow in the Channel between the Separator Plate and the Anode of a Fuel Cell with Molten Carbonate Electrolyte

Some models for the gas mixture composition variation in the channel between the separator plate and anode of a molten carbonate fuel cell are considered. A two-dimensional model for the carbon dioxide diffusion in the channel is solved analytically and numerically. The anodic current density is estimated.     

Evaluating the Conservation State of Naturally Aged Paper with Raman and Luminescence Spectral Mapping: Toward a Non-Destructive Diagnostic Protocol

Micro-Raman and luminescence spectroscopy were combined with morphological analysis to study the conservation state of differently degraded paper samples, dated from 1873 to 2021. The aim of the work reported in this paper was to obtain ageing markers based on variations of Raman and fluorescence spectral features. Raman and luminescence spectra were acquired by scanning non-printed areas of books, and Raman and fluorescence maps were built by contrasting spectral parameters point by point, obtaining a micron-scale space resolved imaging of the degradation pattern. Complementary information on paper morphology and surface compactness were obtained by high-resolution scanning electron and atomic force microscopy. The proposed non-destructive procedure is particularly interesting for precious and ancient samples to analyze their degradation processes and to evaluate the performance and effectiveness of restoration treatments.     

Zinc and Cadmium Complexes of a Plant Metallothionein under Radical Stress: Desulfurisation Reactions Associated with the Formation of trans‐Lipids in Model Membranes

Biomimetic tandem protein/lipid damage : The reactions of reductive reactive species, produced by γ irradiation of water, with Zn and Cd complexes of a metallothionein from a plant afford diffusible sulfur‐centred radicals generated from methionine residues and sulfide ligands. These species migrate from the aqueous phase to the lipid bilayer and transform the cis double bond of the oleate moiety to trans isomer (see scheme).

     

Imine Macrocycle with a Deep Cavity: Guest‐Selected Formation of syn/anti Configuration and Guest‐Controlled Reconfiguration

A dynamic covalent bond is one of the ideal linkages for the construction of large and robust organic architectures. In the present article, we show how organic templates can efficiently transform a complex dynamic imine library into a dynamic imine macrocycle. Not only is the constitution well controlled, but also the syn/anti host configuration is efficiently selected and even the orientation of the guest in the asymmetric cavity of the host can be well aligned. This is attributed to the delicate balance and the cooperation of multiple noncovalent interactions between the hosts and the guests. Through sequential additions of three guests in appropriate amounts, controlled structural reconfiguration of dynamic covalent architectures has been achieved for the first time.     

An Electrochemical Biosensor with Dual Signal Outputs: Toward Simultaneous Quantification of pH and O2 in the Brain upon Ischemia and in a Tumor during Cancer Starvation Therapy

Herein, we develop a novel method for designing electrochemical biosensors with both current and potential signal outputs for the simultaneous determination of two species in a living system. Oxygen (O₂) and pH, simple and very important species, are employed as model molecules. By designing and synthesizing a new molecule, Hemin‐aminoferrocene (Hemin‐Fc), we create a single electrochemical biosensor for simultaneous detection and ratiometric quantification of O₂ and pH in the brain. The reduction peak current of the hemin group increases with the concentration of O₂ from 1.3 to 200.6 μm . Meanwhile, the peak potential positively shifts with decreasing pH from 8.0 to 5.5, resulting in the simultaneous determination of O₂ and pH. The Fc group can serve as an internal reference for ratiometric biosensing because its current and potential signals remain almost constant with variations of O₂ and pH. The developed biosensor has high temporal and spatial resolutions, as well as remarkable selectivity and accuracy, and is successfully applied in the real‐time quantification of O₂ and pH in the brain upon ischemia, as well as in tumor during cancer therapy.     

Photoinitiated polymerization of methacrylic monomers in a poly(methyl methacrylate) matrix: A comparative study with other matrices (styrene–butadiene–styrene,polystyrene, and polybutadiene)

The kinetics and mechanism of the photoinitiated polymerization of 1,6‐hexanediol dimethacrylate (HDDMA) in a poly(methyl methacrylate) (PMMA) matrix were studied. The maximum double‐bond conversion, the maximum polymerization rate, the intrinsic reactivity, and the kinetic constants for propagation and termination were calculated. For this system, a reaction‐diffusion termination mechanism occurred from the start of the polymerization, and it was predominantly maintained until high monomer concentrations, probably because of the relatively high intermolecular attraction force between the PMMA matrix and HDDMA monomer. In addition, a comparative study of the photoinitiated polymerization of methacrylic monomers in four different polymeric matrices [styrene–butadiene–styrene (SBS), polystyrene (PS), polybutadiene (PB), and PMMA] was carried out. The aggregation state, vitreous or rubbery, of the monomer–matrix system and the intermolecular strength of attraction in the monomer–matrix system and growing macroradical and matrix systems were the principal factors influencing the kinetic and mechanistic behavior of these systems. When PB and SBS were used as matrices, crosslinked polymerized products were obtained as a result of the participation of double bonds of the matrix in the polymerization process (copolymerization). PS sequences in the SBS and PS matrices also took part in the polymerization process through the coupling of the benzylic radical to the growing macroradical. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 120–127, 2002     

Controlled/living cationic polymerization of styrene with BF3OEt2 as a coinitiator in the presence of water: Improvements and limitations

The controlled/living cationic polymerization of styrene using R-OH/BF₃OEt₂ (R-OH = 1-phenylethanol (1), 2-phenyl-2-propanol (2) and 1-(4-methoxyphenyl)ethanol (3)) at 0 °C in CH₂Cl₂ and in the presence of water was investigated. With 1/BF₃OEt₂, the poor control over molecular weight and molecular weight distribution was ascribed to a competitive protonic initiation induced by water. The molecular weight of the polymers obtained with 2/BF₃OEt₂ and 3/BF₃OEt₂ at low water content ([H₂O] ? 0.11 M) increased in direct proportion to the monomer conversion in agreement with the calculated values, assuming that one initiator molecule generates one polymer chain, but the molecular weight distribution was found relatively broad (M_w/M_n ∼ 1.8). ¹H NMR analyses confirmed that polymerization proceeds via reversible activation of C-OH terminus, but some loss of hydroxyl functionality was revealed. Some trials using high water contents in the recipe ([H₂O] ? 1.6 M) produced only traces of polymer due to catalyst decomposition.     

Active layer of the oxygen cathode in a fuel cell with Nafion and platinum: The role played by the diffusion and ohmic restrictions and the selection of the working thickness of the active layer

The basic parameters that characterize the operation of the active layer of a cathode with Nafion are the effective coefficient of the diffusion of oxygen, the effective ionic conductance, and the thickness of the active layer. One of the deficiencies intrinsic to the fuel cells containing Nafion is their extreme sensitivity to the heat and moisture exchange. Nafion demands an optimum degree of humidification. Upon thoroughly draining the active layer of a cathode with Nafion, its effective ionic conductance substantially lowers, and large diffusion restrictions arise following the flooding of pores in the active layer. The goal of this work is to perform a comparison of values of some dimensional characteristics pertaining to the flooded and thoroughly drained active layers of a cathode with similar indicators of an active layer in its optimum (normal) state. It is demonstrated how one should perform the selection of the working thickness of an active layer that would provide for the efficiency of its functioning.