Computer simulation on kinetics of primary process in photosynthesis of algae (V) --Excitation energy transfer in phycoerythrocyanins

Excitation energy transfer in phycoerythrocyanins (PEC) was studied by use of computer simulation. The results observed from the simulation are as follows: (i) The α84 is a more efficient sensitizing chromophore than β155 and donates the excitation energy into β84 and β155 while it scarcely emits fluorescence itself, (ii) Only the 1α84 →2β84 is the sub-picosecond process in a PEC trimer, therefore it is readily to obtain the time constant from fs-level time-resolved spectral measurement. (iii) The β84 and β155 chromophores in PEC behave quite differently from those in C-PC because of the changes in α84. It is observed that 1β156→6β155 is the dominant pathway linking two trimers and both of the chromophores possess much higher fluorescence fractions, and about 80% of the total fluorescence is emitted from the β84 chromophore. (iv) A far less mean number of transfer times is observed through the fast-transfer pairs in PEC compared with that in C-PC because of slow transfer rate for the path     

On the solvolysis kinetics of amidoesters derived from β-aminoalcohols

To better understand reactivity in such systems, fifteen amidoesters derived from β-aminoalcohols were solvolyzed at the ester group in mildly basic methanol-d₄. All trials showed pseudo-first-order kinetics by ¹H NMR. The rate constants are about 2 to 140-fold larger than those found with simple alkyl esters. The least bulky N-acyl groups generally sponsor the largest rate constants, and strongly so in two cases, but apparently not as a result of lesser steric crowding between the amide and ester groups. Rate constants are also greater for those amidoesters favoring an anti conformation at the amide linkage.     

The kinetics of the solid-state dimerization of aquabis-N-acetyl-β-alaninatocopper(II)monohydrate

The simultaneous dehydration and dimerization of the blue monomeric complex of N-acetyl-β-alanine and copper(II) has been studied by isothermal thermogravimetry. The results are consistent with a two-stage loss of water from the dihydrate, dimerization being concurrent with the loss of the second water molecule.     

Role of anions in the kinetics of the acid catalyzed dissociation of tris-(2,2′bipyridine) Fe(II) complex

Excess of Cl⁻ and NO₃⁻ ions bring about a significant increase in the rate of dissociation of the tris-(2,2′bipyridine) Fe(II) complex in HCl, HClO₄ and H₂SO₄ in a very narrow range of H⁺ concentration (∼0·1−0·3 M). Above and below this concentration range, these anions do not lead to significant variation in the rate of dissociation. This points to the involvement of these ions in a kinetic step which is only important in the rate expression in this narrow range. It is suggested that the anions occupy the coordination site left vacant by the partial dissociation of the complex leading to the half bonded intermediate. This would significantly lower the free energy of activation for the subsequent protonation step leading to complete dissociation and thus lead to acceleration. The lowering of the free energy of activation will be mainly due to an increase in entropy of this intermediate on account of charge reduction and lower rigidity due to lack of hydrogen bonding. The retarding effect of SO₄²⁻ concentrations and the unambiguously interpreted as its addition leads to simultaneous changes in H⁺ and HSO₄⁻ concentrations and the possibility of ion pair formation with the complex cannot be ruled out.     

Studies on synthesis and kinetics of thermodecomposition of the nickel(Ⅱ) compounds with Schiff base derived from amino acids

Monoaqua salicylaldehyde-o-aminobenzoic acid Ni(Ⅱ) monohydrate (cp1) and monoaqua o-vanillin-o-aminobenzoic acid Ni(Ⅱ) monohydrate (cp2) were synthesized. The composition and structures of these two compounds were analyzed. Their thermal stability and non-isothermal kinetics were also investigated by use of TG and DTG curves. The possible reaction mechanisms in their first steps of thermal decomposition reactions were deduced by means of integral and differential methods. Thermodecomposition kinetic equations of the compounds are as follows:Cp1: da/At = A . exp(-E/RT) . 3/2(1 - a)4/3 . [1/(1 - a)1/3 -1]-1 Cp2 : da/At = A . exp(-E/RT) . (1 - a)     

Electron transfer kinetics on composite diamond (sp3)–graphite (sp2) electrodes

The concept of non-diamond sp² impurity states as charge transfer mediators on boron-doped diamond (BDD) surface was suggested as an explanation for the electrochemical behavior of synthetic diamond based electrodes. In order to verify this concept, graphite particles (sp²) were deposited on diamond electrodes (sp³) by mechanical abrasion. The behavior of the so prepared diamond–graphite composite electrodes were compared with those of as-grown (BDD_ag) and those after mild anodic polarization (BDD_mild).Outer-sphere electron transfer processes such as ferri/ferrocyanide (Fe(CN)₆III/II) and inner-sphere charge transfer reactions such as 1,4-benzoquinone/hydroquinone (Q/H₂Q) were chosen in order to investigate the electrochemical properties of these composite electrodes. Both redox systems became more reversible as the graphite (sp²) loading increased. A strong analogy existed between as-grown diamond electrodes and diamond–graphite composite electrodes.Finally a model is proposed which describes the BDD electrode surface as a diamond matrix in which non-diamond (sp²) impurity states are dispersed. These non-diamond sp² states on BDD surface acts as charge mediators for both inner-sphere and outer-sphere reactions.     

Catalytic effect of CTAB reverse micelles on the kinetics of dissociation of bis(2,4,6–tripyridyl-s-triazine) iron(II)

The kinetics of dissociation of bis(2,4,6–tripyridyl-s-triazine) iron(II), ([Fe(TPTZ)₂]²⁺) has been studied in CTAB/chloroform/hexane reverse micellar medium. In the absence of acid, the reaction is immeasurably slow and does not go to completion in conventional aqueous medium but is markedly accelerated and takes place with a rate constant equal to 55.3 × 10^?3 s^?1 and goes to completion in reverse micelles. The significant increase in rate is attributed to the special properties of the water pool in the reverse micelles like low dielectric constant, nucleophilic effect of Br^- ion, and favorable partitioning of TPTZ in the organic phase. The rate of the reaction decreases with increase in W (=[H₂O]/[CTAB]) at constant CTAB concentration and remains constant with increase in CTAB at fixed W. The results are compared with other closely related systems.     

Role of the molecular weight and the composition on the hydrolysis kinetics of monolayers of poly(α-hydroxy acid)s

The hydrolysis kinetics of spread insoluble monolayers of poly(α-hydroxy acid)s with various molecular weights and lactic acid–glycolic acid molar ratios was followed by measuring simultaneously the decrease in the surface area at constant surface pressure and the evolution of the surface potential. The interfacial hydrolysis at alkaline pH leads to the progressive fragmentation of the polymer molecules and the appearance of charged insoluble products (detected by measuring the surface potential) and small soluble fragments (detected by measuring the decrease in the surface area). The data obtained by both approaches were interpreted in the framework of the random scission model. The rates of hydrolysis are larger for polymers with smaller initial polymerization numbers and increase with the decrease in the molar ratio of lactic acid units. Received: 7 December 1998 Accepted in revised form: 8 March 1999     

Synthesis of the Natural Products Resveratrol (Ⅰ) and Isorhapotogenin (Ⅱ)

ResveratrolIandisorhapotigeninIIaretwonaturalproductswithmanybiologicalactivities',andtheirtotalsynthesis'havebeenreported.LinMaoetal3flrstisolatedthemfromG.parvofOlium,atraditionalChineseherbusedtotreatrheumatoidarthritis,ulcerbleedingandbronchitis.Inanattempttopreparecnoughsamplesfortlirtherpharmacologicalevaluation,severalsynthesisstrategieshavebeenexplored'.WchavcdevelopedtwosyntheticapproachesofIandIIinSchemelandScheme2,respectivcly.Startingfrom3,5-dihydroxybenzoicacid,thecompound2wa…     

Why intermolecular nitric oxide (NO) transfer? Exploring the factors and mechanistic aspects of NO transfer reaction

Small molecule activation and their transfer reactions in biological or catalytic reactions are greatly influenced by the metal-centers and the ligand frameworks. Here, we report the metal-directed nitric oxide (NO) transfer chemistry in low-spin mononuclear {Co(NO)}⁸, [(12-TMC)Co^III(NO⁻)]²⁺ (1-CoNO, S = 0), and {Cr(NO)}⁵, ([(BPMEN)Cr(NO)(Cl)]⁺) (4-CrNO, S = 1/2) complexes. 1-CoNO transfers its bound NO moiety to a high-spin [(BPMEN)Cr^II(Cl₂)] (2-Cr, S = 2) and generates 4-CrNOvia an associative pathway; however, we did not observe the reverse reaction, i.e., NO transfer from 4-CrNO to low-spin [(12-TMC)Co^II]²⁺ (3-Co, S = 1/2). Spectral titration for NO transfer reaction between 1-CoNO and 2-Cr confirmed 1 : 1 reaction stoichiometry. The NO transfer rate was found to be independent of 2-Cr, suggesting the presence of an intermediate species, which was further supported experimentally and theoretically. The experimental and theoretical observations support the formation of μ-NO bridged intermediate species ({Cr–NO–Co}⁴⁺). Mechanistic investigations using ¹⁵N-labeled-¹⁵NO and tracking the ¹⁵N-atom established that the NO moiety in 4-CrNO is derived from 1-CoNO. Further, to investigate the factors deciding the NO transfer reactivity, we explored the NO transfer reaction between another high-spin Cr^II-complex, [(12-TMC)Cr^II(Cl)]⁺ (5-Cr, S = 2), and 1-CoNO, showing the generation of the low-spin [(12-TMC)Cr(NO)(Cl)]⁺ (6-CrNO, S = 1/2); however, again there was no opposite reaction, i.e., from Cr-center to Co-center. The above results advocate clearly that the NO transfer from Co-center generates thermally stable and low-spin and inert {Cr(NO)}⁵ complexes (4-CrNO & 6-CrNO) from high-spin and labile Cr-complexes (2-Cr & 5-Cr), suggesting a metal-directed NO transfer (cobalt to chromium, not chromium to cobalt). These results explicitly highlight that the NO transfer is strongly influenced by the labile/inert behavior of the metal-centers and/or thermal stability rather than the ligand architecture.

Nitric oxide activation and parameters influencing intermolecular transfer of nitric oxide.     

Synthesis,CMC determination and influence of the micelles, β-cyclodextrin,ionic liquids and liposome(dipalmitoylphosphatidylcholine) vesicles on the kinetics of an outer-sphere electron transfer reaction

The surfactant–cobalt(III) complex, cis-[Co(trien)(4AMP)(DA)](ClO₄)₃, trien = triethylenetetramine, 4AMP = 4-aminopyridine, DA = dodecylamine was synthesized and characterized by various spectroscopic and physico-chemical techniques. The critical micelle concentration (CMC) value of this surfactant–cobalt(III) complex in aqueous solution was found out from conductance measurements. The conductivity data (at 303, 308, 313, 318 and 323 K) were used for the evaluation of the temperature-dependent CMC and the thermodynamics of micellization (ΔG _m ^° , ΔH_m and ΔS _m ^° ). Also the kinetics of reduction of this surfactant–cobalt(III) complex by hexacyanoferrate(II) ion in micelles, β-cyclodextrin, ionic liquids (ILs) and in liposome vesicles (DPPC) media were studied at different temperature. The rate constant for the electron transfer reaction in micelles was found to increase with increase in the initial concentration of the surfactant–cobalt(III) complex. This peculiar behaviour of dependence of second-order rate constant on the initial concentration of one of the reactants has been attributed to the presence of various concentration of micelles under different initial concentration of the surfactant–cobalt(III) complex in the reaction medium. Inclusion of the long aliphatic chain of the surfactant complex ion into β-cyclodextrin leads to decrease in the rate constant. Below the phase transition temperature of DPPC, the rate decreased with increasing concentration of DPPC, while above the phase transition temperature the rate increased with increasing concentration of DPPC. It is concluded that below the phase transition temperature, there is an accumulation of surfactant–cobalt(III) complex at the interior of the vesicle membrane through hydrophobic effects, and above the phase transition temperature the surfactant–cobalt(III) complex is released from the interior to the exterior surface of the vesicle. In the presence of ionic liquid medium the second order rate constant for this electron transfer reaction for the same complex was found to increase with increasing concentration of ILs has also been studied. An outer-sphere mechanism is proposed for all these reactions and the results have been explained based on the hydrophobicity of the ligand and the reactants with opposite charges.     

Energy relationship and the polarization of C_(60) cage in the endohedral complexes (X@C_(60))

In this paper, we carry out the calculation on the system (X@C60)(X=Li, Na, K, Kb, Cs; F, Cl, Br, I), where the position of X changes along 5 typical symmetry directions. For the calculation of quantum chemistry we use EHMO/ASED method, for the calculation of molecular mechanics we use Buckingham potential (exp-6-1) function, and for the calculation of thermo-chemical cycle we use individually isolating the processes such as the structure variation, charge transfer and charge distribution, and their interactions etc. The calculation results show that (1) In the region of radius r≈0.2 nm of the Ceo cage, the potential field is nearly spherical; (2) Except for Li and Na, the systems are the most stable with minimum energies at the center of C60 cage. For Li and Na, the systems are the most stable with minimum energies at r≈0.16 nm and r≈0.13 nm, respectively. In view of the interactive region of chemical bonds, the interactions between X and the C60 cage do not belong to the classical chemical bonds; (     

Effect of some added salts on the kinetics of dissociation of tris-2,2′-bipyridine-Fe(II) complex

Both monovalent cations and anions show a regular gradation, according to their sizes, in their effect on the rate and the activation parameters for the dissociation of tris(2,2′-bipyridine)-Fe(II) complex in acid. ΔS and ΔH of activation in M, 0.1 M and 0.01 M acid decrease in the order Cl⁻ > Br⁻ > I⁻ for anions and Li⁺ > Na⁺ > Cs⁺ for cations. The effect of the bulky tetra-alkyl ammonium ions is anomalous and does not depend on their sizes. The effect of the anions can be rationalized in terms of their involvement with the vacant coordination site of the partially bonded intermediate. The effect of cations is probably due to their altering the water structure at high concentration. The anomalous of the tetra-alkyl ammonium ions supports this view.     

Model Study of Basin Soil Loss (BSL) in the Loess Plateau of China (Ⅰ)

Rain is the main motive force of erosion in the Loess Plateau of China. The relationship between rain and basin soil loss (BSL) is the base for establishing BSL model. Based on areo image interpretation, site investigation and analysis of 30-year rain-hydrological data of the study area——the Gushanchuan River Basin which is a branch of the middle reaches of the Yellow River basin as well as one of the intense erosion centres, the BSL features have been revealed. According to the features, the structure of the BSL model is proposed as follows: C·R =S, where C, R and S represent the factor of underlayer, rain and BSL quantity, respectively.Then by using the methods of multivariate statistical analysis, the dominant rain specific elements that affect the BSL and the corresponding formula of the relationship between rain and BSL have been determined as P_m and I_a, and respectively. With this formula the BSL quantity of every rainfall can be estimated. The estimated accuracy can be satisfied after correc     

The kinetics of the polymorphic transition of the α-form of 2,4,6,8,10,12-hexanitrohexaazaisowurtzitane

The α → γ polymorphic transition in hexanitrohexaazaisowurtzitane was studied by optical microscopy, calorimetry, IR spectroscopy, thermogravimetry, and X-ray diffraction. The thermal effect of the transition was determined. The kinetics of the process is complex because of the relation between structural rearrangement and transition with the removal of water stabilizing the structure of the α polymorph. Depending on the morphological characteristics of the initial sample, the polymorphic transition can follow a frontal-heterogeneous mechanism (single crystal → polycrystalline aggregate) or a quasi-homogeneous mechanism (single crystal → single crystal).     

Application of non-isothermal cure kinetics on the interaction of poly(ethylene terephthalate) — Alkyd resin paints

Samples of paint (P), reused PET (PET-R) and paint/PET-R mixtures (PPET-R) were evaluated using DSC to verify their physical-chemical properties and thermal behavior. Films from paints and PPET-R are visually similar. It was possible to establish that the maximum amount of PET-R that can be added to paint without significantly altering its filming properties is 2%. The cure process (80–203°C) was identified through DSC curves. The kinetic parameters, activation energy (E _a) and Arrhenius parameters (A) for the samples containing 0.5 to 1% of PET-R, were calculated using the Flynn-Wall-Ozawa isoconversional method. It was observed that for greater amounts of PET-R added, there is a decrease in the E _a values for the cure process. A Kinetic compensation effect (KCE), represented by the equation InA=−2.70+0.31E _a was observed for all the samples. The most suitable kinetic model to describe this cure process is the autocatalytic Šesták-Berggreen, model applied to heterogeneous systems.     

Energy transfer dynamics in Re(I)-based polynuclear assemblies: a quantitative application of Förster theory

The synthesis, structure, and photophysical properties of a new family of tetranuclear FeRe 3 chromophore-quencher complexes having the general form [Fe(pyacac) 3(Re(bpy')(CO) 3) 3](OTf) 3 (where pyacac = 3-(4-pyridyl)-acetylacetonate and bpy' is 4,4',5,5'-tetramethyl-2,2'-bipyridine (tmb, 1), 2,2'-bipyridine (bpy, 2), and 4,4'-diethylester-2,2'-bipyridine (deeb, 3)) are reported. Time-resolved emission data acquired in room-temperature CH 2Cl 2 solutions exhibited single exponential decay kinetics with observed lifetimes of 450 +/- 30 ps, 755 +/- 40 ps, and 2.5 +/- 0.1 ns for complexes 1, 2, and 3, respectively. The emission in each case is assigned to the decay of the Re (I)-based (3)MLCT excited state; the lifetimes are all significantly less than the corresponding AlRe 3 analogues (2250 +/- 100 ns, 560 +/- 30 ns, and 235 +/- 20 ns for 4, 5, and 6, respectively), which were also prepared and characterized. Electron transfer is found to be thermodynamically unfavorable for all three Re (I)-containing systems: this fact coupled with the absence of optical signatures for the expected charge-separated photoproducts in the time-resolved differential absorption spectra and favorable spectral overlap between the donor emission and the acceptor absorption profiles implicates dipolar energy transfer from the Re (I)-based excited state to the high-spin Fe (III) core as the dominant quenching pathway in these compounds. Details obtained from the X-ray structural data of complex 2 allowed for a quantitative application of Forster energy transfer theory by systematically calculating the separation and spatial orientation of the donor and acceptor transition moment dipoles. Deviations between the calculated and observed rate constants for energy transfer were less that a factor of 3 for all three complexes. This uncommonly high degree of precision testifies to both the appropriateness of the Forster model as applied to these systems, as well as the accuracy that can be achieved in quantifying energy transfer rates if relative dipole orientations can be accounted for explicitly.     

Catalytic and inhibiting effects of ferrocene on the bulk radical–coordination polymerization of methyl methacrylate from the standpoint of formal kinetics

The kinetic curves and rates of bulk radical–coordination polymerization of methyl methacrylate initiated by the benzoyl peroxide–ferrocene system at 293–373 K, initial benzoyl peroxide concentrations of 10^–4–10^–1 mol/L, and a constant initial ferrocene concentration of 10^–3 mol/L have been calculated using a mathematical model in which the process is considered from the standpoint of formal kinetics. The calculations have demonstrated that, at low methyl methacrylate conversions, ferrocene catalyzes the process at any benzoyl peroxide concentration; at medium and high methyl methacrylate conversions, deficient amounts of ferrocene with respect to benzoyl catalyze the process as well, while excess ferrocene inhibits the process. The observed effect is explained by the specific ferrocene–benzoyl peroxide interaction, which, depending on the ferrocene: benzoyl peroxide ratio, either increases or decreases the concentration of radicals in the reaction mass.