AZ91D镁合金上钼改性锌系磷化膜的制备、 结构及性能

采用在磷化液中添加钼酸钠及腐蚀抑制剂的方法, 在AZ91D 镁合金表面上制备了均匀细致的锌系复合磷化膜. 用XRD对膜层的化学组成及结构进行了表征,用SEM和EDS对膜层的形貌和组分含量进行分析. 结果表明, 磷化膜主要由Zn3(PO4)2·4H2O和单质Zn组成. 在磷化液中加入钼酸钠使磷化膜组织更加细致而且无裂纹. 磷化液中的钼酸钠含量为1.5 g/L时, 磷化膜的结晶最致密, 单质锌的含量最高, 耐蚀性最好. 还提出了一种快速测量镁合金表面膜层耐蚀性的试验方法, 同时对镁合金上的磷化反应的机理进行了探讨.     

La2O3对氧化铝透明陶瓷显微结构和透光性能的影响

采用传统无压烧结工艺在氢气氛下制备Al2O3透明陶瓷。实验结果表明：MgO和La2O3复合添加时，随着La2O3掺杂量的增加体积密度总体上保持上升的趋势。随着保温时间的延长，陶瓷的致密化程度增大，残余气孔逐步排出，晶粒进一步长大。采用La2O3和MgO复合添加比单独掺入MgO陶瓷样品透过率更高，掺杂效果更好。在烧结温度为1750℃，保温时问为1h条件下，在波艮为300～800nm测试范围内，陶瓷样品的全透过率大于82％，最大值为86％。     

Pd/CexZr1-xO2/Al2O3催化剂上甲烷燃烧及TPR/TPO性能研究

考察了Ce-Zr复合氧化物的添加对Al2O3负载Pd催化剂的甲烷燃烧性能的影响，并利用XRD，TPR，TPO技术对Pd／CexZr1-xO2／Al2O3体系催化剂的物相结构及氧化还原性能进行了研究。结果表明，Ce-Zr复合氧化物的添加抑制了氧化铝载体的。相变并提高了PdO的分解温度，从而提高了催化剂的耐热稳定性。催化剂经高温1100℃焙烧老化后，由于Ce-Zr复合氧化物的存在促进了表面PdO物种的还原，从而提高了甲烷的催化燃烧活性（T20％和T90％值降低），其中Pd／Ce0.2Zr0.8O2／Al2O3催化剂具有最好的催化活性及热稳定性。     

硝酸镁在γ-Al2O3上的热分解及MgO/γ-Al2O3的碱性

研究了不同载量时Mg(NO3)2 在γ Al2O3 上存在状态和热分解行为差异.考察了Mg含量不同时MgO/γ Al2O3 的碱性变化情况 ,并与水滑石焙烧产物Mg(Al)O的碱性进行了对比.结果表明,Mg(NO3)2 可单层分散于γ Al2O3 表面 ,Mg(NO3)2 的分散决定了MgO的分散阈值 ;单层态的Mg(NO3)2 比晶态的分解温度低 ;MgO/γ Al2O3 在阈值附近具有单位表面最高碱量 ,碱位分布与Mg(Al)O相似 ,单位表面碱量高于Mg(Al)O.由于γ Al2O3 的织构可以方便地调节 ,且MgO/γ Al2O3很容易制备 ,MgO/γ Al2O3 是一个很有应用前景的固体碱.     

负载型Cu-Mn-Ce催化剂燃烧VOCs反应的载体效应

以MgO,Al2O3,SiO2,TiO2和ZrO2为载体,采用浸渍法制备了负载型Cu-Mn-Ce(CMC)三元复合氧化物催化剂,并用TG,XRD,BET和H2-TPR对催化剂进行了表征,以甲苯和丙酮催化燃烧为模型反应,考察了该催化剂的催化活性。结果表明,纯CMC催化剂的铈基固溶体结构表现出优良的催化活性,当CMC负载在SiO2和Al2O3上后,其大比表面积和表面羟基均不利于CMC活性固溶体结构的形成,另外Mn,Cu等过渡金属与MgO载体发生相互作用而破坏了CMC的活性结构。TiO2和ZrO2则较好地保持了CMC活性固溶体的结构,并显著提高了CMC催化剂的高温热稳定性。     

纳米材料在三元催化剂中的应用研究Ⅰ. 纳米Al2O3涂层

从物相、表面性能、表面形貌、催化剂老化前后的转化率和起燃特性等方面对纳米Al2O3涂层在三元催化剂中的应用进行了初探.纳米Al2O3在600～1050 ℃范围内,性能稳定,老化后催化剂的转化率、起燃温度特性也较好.纳米Al2O3涂层有良好的应用前景.     

CeO2添加对Ag/A12O3催化剂低温氨氧化性能的影响

采用活性测试和氮气吸附、X射线衍射、X射线光电子能谱、紫外-可见漫反射吸收光谱、高倍透射电镜、原位漫反射傅里叶变换红外光谱和O2脉冲吸附等研究了铈添加对Ag/Al2O3催化剂低温氨氧化性能的影响.结果表明,适量铈的添加可以明显促进Ag/Al2O3催化剂的低温氨氧化活性,且对催化剂的选择性影响不大.添加铈不仅可以促进Ag/Al2O3催化剂表面吸附和活化O2的能力,而且可促进催化剂表面对氨的解离吸附和活化.这是铈促进Ag/Al2O3催化剂低温氨氧化活性的主要原因.     

太阳能甲烷重整中催化活性吸收体的表面特性

以AISI316泡沫金属为基体为太阳能甲烷重整反应制备出系列Ru基和Ni基催化活性吸收体(Ru/Al2O3/AISI316,Ni/Al2O3(MgO)/AISI316),着重利用XRD、TPR、TPD和CO2脉冲吸脱附等技术对所制整体式催化剂的表面特性进行了表征和分析.结果表明:以AISI316泡沫金属为基体可增加活性组分与涂层载体Al2O3的相互作用以及活性物种的分散度.对于Ni基催化活性吸收体,在涂层载体中添加MgO助剂可显著地提高Ni/Al2O3/AISI316的催化活性;Al2O3涂层载体含量的增加可提高活性组分NiO的分散性.相对Ni/Al2O3/AISI316,Ru/Al2O3/AISI316催化活性吸收体对CO2的吸附和活化能力更强,因而具有相对更高的催化活性.     

纳米Cr2O3系列催化剂上CO2氧化乙烷脱氢制乙烯反应

 采用溶胶－凝胶法和共沸蒸馏法耦合技术制备了纳米Cr2O3催化剂，并采用共沉淀法和共沸蒸馏法耦合技术制备了纳米Cr2O3／Al2O3，Cr2O3／ZrO2和Cr2O3／MgO复合催化剂．应用BET，XRD，XPS，TPR和TEM等物理化学方法对催化剂的结构和物化性质进行了表征，并考察了该系列催化剂上CO2氧化乙烷脱氢制乙烯的反应性能．结果表明，纳米Cr2O3催化剂上乙烷和CO2的转化率均明显高于常规Cr2O3催化剂，但乙烯的选择性低于常规Cr2O3催化剂；纳米复合催化剂中的复合成分显著影响催化剂的催化性能．其中，10％Cr2O3／MgO纳米复合催化剂在温度为973K时，乙烷转化率和乙烯选择性分别可达到61．54％和94．79％．纳米催化剂表面Cr的还原性以及Cr6＋／Cr3＋比值是影响乙烷转化率和乙烯选择性的重要因素．     

Redox property of Co3O4/CeO2 and the effect of reaction conditions on its performance in CO oxidation

采用沉淀氧化法制备了Co3O4/CeO2催化剂.运用XRD、BET和TPR表征手段,考察了不同钴铈比及焙烧温度对钴铈复合氧化物物理及化学性能的影响,并分别在干、湿条件下进行了一氧化碳氧化反应研究.结果表明,与纯的Co3O4相比,在不同比例的Co3O4/CeO2均经723 K焙烧的各种催化剂中,钴铈原子比为9∶1的复合氧化物粒径较小,比表面积较大,说明适当比例铈的添加能使Co3O4具有较小的粒径.此氧化物经538 K温度焙烧制得的钻铈比为9∶1的复合氧化物中Co3O4平均粒径为7.2nm,BET比表面积为167.6 m2/g.经TPR考察发现其具有最优的氧化还原性能.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.