全氟辛酸、全氟辛基磺酸乙醇胺盐表面活性剂的性质研究

通过测试表面张力、泡沫性质与粘度性质,研究全氟辛酸乙醇铵/二乙醇铵/三乙醇铵和全氟辛基磺酸乙醇铵/二乙醇铵/三乙醇铵的性质。实验表明,反离子对全氟辛酸盐和全氟辛基磺酸盐表现出相同规律的影响,这种影响体现在反离子的疏水性和空间体积两个方面,分别导致了cmc顺序:乙醇铵二乙醇铵三乙醇铵,以及与之相反的γcmc顺序:乙醇铵二乙醇铵三乙醇铵。粘度大小顺序为:乙醇铵二乙醇铵三乙醇铵,有机反离子的粘度要大于无机反离子。这与分子量、氢键大小的关系是一致的。总体来说发泡能力:乙醇铵二乙醇铵三乙醇铵,这和γcmc的顺序相符。有机反离子的发泡能力要高于无机反离子。另外,对于同种反离子,全氟辛基磺酸盐的胶束化能力、粘度和发泡能力均明显高于全氟辛酸盐,但是全氟辛基磺酸盐的γcmc要略高于全氟辛酸盐。通过量子化学计算表明分子结构中磺酸根头基的负电荷要小于羧酸根,这样表面活性剂全氟辛基磺酸根的头基与反离子的结合能力要弱于全氟辛酸根,从而导致了溶液表面吸附层中全氟辛酸盐在反离子的协同作用下排列更为紧密。     

TG comparison between the efficiency of deposited ammonium bromide and ammonium chloride on the flame-retardancy imparted to cotton fabric

This study investigates the effect of ammonium bromide and/or ammonium chloride as nondurable finishes on the flammability of 100% cotton fabric, (woven construction, weighing 144 g m⁻²). The laundered bone-dried, weighed fabrics were impregnated with suitable concentrations of aqueous ammonium bromide and/or ammonium chloride solutions by means of squeeze rolls and dried at 110°C for 30 min. Afterwards they were cooled in a desiccator, re-weighed with an analytical precision and kept under ordinary conditions before the fulfillment of the vertical flame test. The optimum add-on values to impart flame retardancy expressed in g anhydrous ammonium bromide and ammonium chloride per 100 g fabrics were individually obtained to be about 3.5–3.89 and 17.31–17.99%, respectively. Thermogravimetric analysis (TG/DTG) of pure cotton and the salts treated fabrics were fulfilled and their curves were compared and commented. The results obtained comply with free radical theory, and also proved the superiority of ammonium bromide for the impartation of flame-retardancy in regard to ammonium chloride.     

两种Zn-饱和铵盐还原体系用于氢化偶氮苯的合成

采用Zn-饱和甲酸铵溶液、Zn-饱和苯甲酸铵溶液还原体系,从偶氮苯制备氢化偶氮苯。Zn-饱和甲酸铵溶液还原体系的优化反应条件为:偶氮苯/锌物质的量比为1∶3(偶氮苯2.5 mmol),饱和甲酸铵溶液1.0 mL,反应时间5 min,产率87.5%。Zn-饱和苯甲酸铵溶液还原体系的优化反应条件为:偶氮苯/锌物质的量比为1∶3(偶氮苯0.625 mmol),饱和苯甲酸铵溶液2.0 mL,反应时间3 min,产率86.4%。     

Dodecylbenzene sulfonate-coated magnetite nanoparticles as a new adsorbent for solid phase extraction-spectrophotometric determination of ultra trace amounts of ammonium in water samples

A new method was proposed for the determination of ammonium based on the preconcentration with dodecylbenzene sulfonate modified magnetite nanoparticles. Ammonium was oxidized to nitrite by hypobromite and then the nitrite produced was determined spectrophotometrically, using sulfabenzamide and N-(1-naphthyl) ethylenediamine after solid phase extraction. The azo dye produced was desorbed by an appropriate small volume of sodium hydroxide prior to the absorbance measurement. The linear calibration graphs were obtained in the concentration range of 0.03-6.00 ng mL(-1) ammonium. The relative standard deviation and recovery percents were 1.0 and 99.0, respectively, for 1.0 ng mL(-1) ammonium, and the limit of detection was 3.2 ng L(-1) ammonium. The interfering effects of a large number of diverse ions on the determination of ammonium were studied. The method was applied to the determination of ammonium in various types of water resources. The results revealed a high efficiency for the recommended ammonium determination method.     

Kinetics and mechanism of thermal decomposition of ammonium nitrate and sulfate mixtures

Fundamental kinetic aspects of the decomposition of mixtures and double salts of ammonium nitrate and ammonium sulfate were studied. The effect of water and sulfuric acid additives on the thermal decomposition rate of ammonium nitrate and sulfate mixtures was examined. The constant of proton exchange between nitric acid and the sulfate anion in molten ammonium nitrate was estimated.     

有机改性膨润土对己唑醇水悬浮体系物理稳定性的影响

利用4种季铵盐阳离子表面活性剂（十二烷基二甲基苄基氯化铵(1227)、十四烷基二甲基苄基氯化铵(1427)、十六烷基三甲基氯化铵(1631)和十八烷基三甲基氯化铵(1831)）分别对钠基膨润土（Na-Ben）进行有机改性,制得4种有机膨润土（1227-Ben、1427-Ben、1631-Ben和1831-Ben）并进行了红外光谱及X射线分析,考察了4种有机膨润土在水中的悬浮性能及对5%己唑醇水悬体系物理稳定性能的影响。 FT-IR及XRD分析结果表明,供试季铵盐阳离子的有机碳链均进入到膨润土的片层间。 水中悬浮性能测定实验表明,1831-Ben在水中悬浮性能相对较好,而其它3种均不理想,特别是1227-Ben和1427-Ben表现出强烈的斥水现象。 沉降试验表明,有机膨润土的使用有助于5%己唑醇水悬浮剂物理稳定性的提高,其中用1831-Ben制备出的水悬浮体系的物理稳定性明显优于其它3种,制剂析水率最低,屈服值与粘度最大,体系悬浮率最高,可见1831-Ben可以用作5%己唑醇水悬浮剂的抗沉降剂。     

Cyclopolymerization of diallylamine derivatives in dimethyl sulfoxide

Diallyl quaternary ammonium chlorides, bromides and N-alkyldiallylamine hydrochlorides were polymerized with ammonium persulfate (APS) in dimethyl sulfoxide (DMSO). The dependences of yield and molecular weight of polymers on polymerization conditions were examined and quaternary ammonium chlorides were found to have better polymerizability than bromides. The poly(diallyl quaternary ammonium chlorides) obtained with APS—DMSO system are expected to have quite high molecular weights, as determined from the measurement of limiting viscosity numbers of the polymers in NaCl aqueous solution.     

Synthesis and properties of long-chain quaternary ammonium hydroxides

A series of long-chain quaternary ammonium hydroxides were synthesized from tertiary amines and confirmed by ~1H NMR and FTIR.Surface properties and pH of these surfactants were investigated.The critical micelle concentrations(CMC) of the synthesized quaternary ammonium hydroxides are lower than the conventional quaternary ammonium surfactants.The micelles shapes of these long-chain quaternary ammonium hydroxides in aqueous solution are spherical at a concentration of 0.1 mol/L.The pH values of the synthesized quaternary ammonium hydroxides are 12.25-12.51.     

Flow injection gas-diffusion amperometric determination of trace amounts of ammonium ions with a cupric hexacyanoferrate

A new flow injection method for the determination of trace amounts of ammonium ions was developed by using a glassy carbon electrode electrodeposited with a film of cupric hexacyanoferrate coated with Nafion film as the sensor. The electrode gives sensitive but not selective response to potassium and ammonium ions. A gas-diffusion unit was used for the separation of ammonium and potassium ions and high selectivity and sensitivity for ammonium ions can be obtained. The method is simple and sensitive. Under optimum analytical conditions, the linear range of the calibration graph for ammonium ions is 2-40 muM. The method has been applied to the determination of ammonium ions in lake water and rain water samples. Recoveries of 94.4 to 104.4% were obtained. The relative standard deviations of seven replicate analyses for all samples were 1.1-2.3%.     

Properties of the Nanoscale Hydrophilic Cationic Pigment Based on Quaternary Surfactant

Dispersions of four nanoscale hydrophilic cationic pigments were prepared by micro jet milling process, in which the dodecyl trimethyl ammonium chloride (DTAC), tetradecyl trimethyl ammonium chloride (TDAC), hexadecyl trimethyl ammonium chloride (CTAC), and octadecyl trimethyl ammonium chloride (STAC) were used as the dispersers respectively. Zeta potential, particle size, viscosity and dispersion stability were tested. The effect of the hydrophobic chain of cationic quaternary surfactant on pigment dispersion's properties was discussed. The results showed that good dispersion effects were obtained when the hydrophobic chain were 14 or 16.     

以氨水和碳酸铵为沉淀剂制备氧化铝的对比研究

γ-Al2O3，是一种常用的催化剂载体，它具有比表面大和价廉易得等优点。但对于很多高温反应体系，如汽车尾气催化净化，其热稳定性在很大程度上影响了汽车尾气净化催化剂的活性和稳定性，因此提高γ-Al2O3的高温热稳定性对保持汽车尾气净化催化剂的反应活性、延长催化剂的使用寿命非常重要。     

硫脲基咪唑啉季铵盐的合成及其缓蚀作用

用戊酸、羊蜡酸、油酸、二乙烯三胺、氯化苄和硫脲为原料,合成了6种咪唑啉季铵盐化合物。 采用静态失重法和极化曲线法,比较了硫脲基烷基咪唑啉型季铵盐和烷基咪唑啉型季铵盐在80 ℃、1 mol/L的HCl溶液中对碳钢的缓蚀性能,研究了这两类缓蚀剂与无机阴离子和阴离子表面活性剂的协同作用。 结果表明,硫脲基烷基咪唑啉季铵盐类的缓蚀效果明显优于烷基咪唑啉季铵盐类,硫脲基羊脂酸咪唑啉缓蚀剂的缓蚀率可达98.3%。 当以羊脂酸、二乙烯三胺、氯化苄和硫脲为原料合成的硫脲基烷基咪唑啉型季铵盐化合物与I-质量比为1∶1复配时,缓蚀效果最佳,比单独使用硫脲基烷基咪唑啉季铵盐化合物的缓蚀率提高了1.5%。     

Ammonium ion mediated resorcarene capsules: ESI-FTICRMS study on gas-phase structure and ammonium ion affinity of tetraethyl resorcarene and its per-methylated derivative

The ammonium ion binding affinities of tetraethyl resorcarene (1) and its per-methylated derivative (2) were studied by electrospray ionization Fourier transform ion cyclotron resonance (ESI-FTICR) mass spectrometry. Ten different ammonium ions were tested as guests for the resorcarenes. A strong tendency for complex formation was observed with all ammonium ions of size and charge distribution suitable for noncovalent interactions with the cavities of the resorcarene hosts 1 and 2. Although differences in ammonium ion affinities were observed between 1 and 2 due to the dissimilar conformations, the overall tendency was that increase in the degree of substitution and the length of carbon chain of the ammonium cation facilitated the complex formation until the sterical hindrance impeded the complexation. Dimeric as well as monomeric ammonium ion complexes were formed with resorcarene 1, but resorcarene 2 was unable to form the dimeric capsules because of the lack of H-bond donor possibilities. The nature of binding of the guest was further investigated with ion-molecule reactions and by determination of the single crystal X-ray structure of host 1 complexed with tetramethyl ammonium bromide.     

The complexation of the ammonium ion by 18-crown-6 in different solvents and by noncyclic ligands,crown ethers and cryptands in methanol

The complexation of the ammonium ion with the macrocyclic ligand 18-crown-6 was studied using calorimetric and potentiometric titrations in different solvents. In water and dimethyl sulphoxide the stability constants had the lowest values compared with all other solvents examined. No specific interactions between the ammonium ion and solvent molecules were observed. Crown ethers formed more stable complexes in methanol with the ammonium ion than diaza crown ethers. The most stable complexes were formed with cryptands. The highest values of the stability constants for the reaction with macrocyclic and macrobicyclic ligands were measured if the dimensions of the ammonium ion and of the cavities were nearly identical.     

Simultaneous determination of inorganic nitrogen species by microcolumn ion chromatography

Inorganic nitrogen species (nitrate, nitrite and ammonium ions) were simultaneously determined by microcolumn ion chromatography. Nitrate and nitrite were determined by UV detection at 206 nm, whereas ammonium ion was determined by fluorescence detection at excitation 410 nm and emission 470 nm. The latter fluorescence detection is based on the postcolumn reaction of ammonium ion with o-phthalaldehyde in the presence of 2-mercaptoethanol. Effects of the reagent concentration, pH, and other reaction conditions on the signal intensity were examined, and the optimum condition was explored. The present method allowed simultaneous determination of nitrate, nitrite and ammonium ions in river water.     

Phase state stabilization of ammonium nitrate for creating an oxidizing agent for smokeless gas-generating formulations yielding no toxic combustion products

Methods for phase stabilization of ammonium nitrate were sought for in order to considerably expand the application area of this oxidizing agent in various-purpose self-combustible formulations, including that in a new generation of gas-generating formulations for automobile air bags. New methods for stabilization of ammonium nitrate were studied and, in particular, a search was made for organic compounds that can stabilize ammonium nitrate even at their low content. The mechanism of phase state stabilization of ammonium nitrate by compounds of this kind was examined.     

Preparation, characterization and application of ZnO sol containing quaternary ammonium salts

The zinc oxide sol containing quaternary ammonium salts (DMDAAC-ZnO) was synthesized by zinc acetate and dimethyldiallyl ammonium chloride via the sol–gel process. Effects of zinc acetate concentration, diethanolamine dosage and dimethyldiallyl ammonium chloride dosage on the absorbance-ratio and viscosity of the sol were investigated. Zinc oxide sols were characterized by XRD, TEM and FT-IR. DMDAAC-ZnO was applied to cotton samples and cotton samples treated were tested by antibacterial activity, UV resistance and breaking strength. The antibacterial activity and UV resistance of samples treated by zinc oxide sol containing quaternary ammonium salt were both better than sample treated by zinc oxide sol.     

Ultrahigh-resolution capillary electrophoretic separation with indirect ultraviolet detection: isotopic separation of [14N]- and [15N]ammonium.

Separation of isotopically labeled [14N]/[15N] ammonium was performed with capillary electrophoresis. This ultrahigh-resolution separation was based on mobility counterbalance with precise control of the anodic electroosmotic flow. Mixtures of zwitterionic surfactant (Rewoteric AM CAS U) and cationic surfactant (cetyltrimethylammonium bromide) were used as buffer additives to modify the electroosmotic mobility. Indirect ultraviolet detection was used with benzyltributylammonium as the buffer coion. Baseline-resolved peaks of [14N]- and [15N]ammonium were obtained within 11 min. The detection limit was 0.01 mM for both [14N]-and [15N]ammonium. Linear calibration in concentration was observed up to 1.0 mM for [15N]ammonium and 2.0 mM for [14N]ammonium. Calibration of the isotopic ratio, [15N]ammonium concentration to total ([14N] and [15N])ammonium, was valid from 5 to 95%.     

Selective synthesis of secondary and tertiary amines by cp*iridium-catalyzed multialkylation of ammonium salts with alcohols

The efficient selective synthesis of secondary and tertiary amines has been achieved by means of Cp*Ir-catalyzed multialkylation of ammonium salts with alcohols without solvent: the reactions of ammonium acetate with alcohols gave tertiary amines exclusively, while those of ammonium tetrafluoroborate afforded secondary amines selectively. Using this method, secondary 5- and 6-membered cyclic amines were synthesized from ammonium tetrafluoroborate and diols in one pot.     

Modular synthesis of di- and tripeptides of luminescent crown ether aminocarboxylic acids

Luminescent benzo crown ether aminocarboxylic acids with ammonium ion affinity were prepared and converted into linear bis- and tris benzo crown ether amides using standard peptide coupling protocols. The affinities of the new crown ethers to ammonium ions and di- and tetrapeptides bearing ammonium ion moieties were determined by emission titration in methanol and buffered water.