Synthesis and optical properties of CuS nanoplate-based architectures by a solvothermal method

The controlled synthesis of copper sulfide (CuS) nanoplate-based architectures in different solvents has been realized at low cost by simply reaction of Cu(NO₃)₂·3H₂O and S under solvothermal conditions without the use of any template. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectrometer and fluorescence measurement were used to characterize the products. The products were all in hexagonal phase with high crystallinity and the morphology was significantly influenced by the solvents. The CuS products synthesized in dimethylformamide (DMF) were nanoplates and the samples prepared in ethanol were flower-like morphology composed of large numbers of nanoplates, but those synthesized in ethylene glycol (EG) were CuS architectures with high symmetry made up of several nanoplates arranged in a certain mode. The optical properties were investigated and the growth mechanisms of these CuS crystals were also proposed.     

花状硫化铜级次纳米结构的制备及可见光催化活性研究

本实验以氯化铜 (CuCl₂·2H₂O) 和二硫化碳(CS₂)为原料, 以乙二醇(C₂H₆O₂) 为溶剂, 通过溶剂热法成功制备了具有可见光活性的花状硫化铜(CuS) 级次纳米结构. 并利用X射线粉末衍射技术(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM) 等技术对其进行了表征, 利用紫外可见吸收光谱(Uv-vis)分析了其光学性能, 并以甲基橙为目标降解物对其可见光催化活性进行了研究. 结果表明: 花状CuS级次纳米结构具有很高的可见光催化活性, 与体相CuS粉末相比有很大的提高, 在自然光照射下对甲基橙的降解率可以达到100%. 同时本文对花状级次纳米结构的形成机理进行了分析. 关键词： 硫化铜 溶剂热 级次纳米结构 光催化     

Effect of the manufacturing parameters on the structure of nitrogen-doped carbon nanotubes produced by catalytic laser-induced chemical vapor deposition

Series of self-assembled and mono-dispersed bovine serum albumin (BSA)-conjugated ZnS/CuS nano-composites with different Zn/Cu ratios had been successfully synthesized by a combination method of the biomimetic synthesis and ion-exchange strategy under the gentle conditions. High-resolution transmission electron microscopy observation, Fourier transform infrared spectra and zeta potential analysis demonstrated that BSA-conjugated ZnS/CuS nano-composites with well dispersity had the hierarchical structure and BSA was a key factor to control the morphology and surface electro-negativity of final products. The real-time monitoring by atomic absorption spectroscopy and powder X-ray diffraction revealed that the Zn/Cu ratio of nano-composites could be controlled by adjusting the ion-exchange time. In addition, the metabolic and morphological assays indicated that the metabolic proliferation and spread of rat pheochromocytoma (PC12) cells could be inhibited by nano-composites, with the high anti-cancer activity at a low concentration (4 ppm). What were more important, Zn and Cu in nano-composites exhibited a positive cooperativity at inhibiting cancer cell functions. The microscope observation and biochemical marker analysis clearly revealed that the nano-composites-included lipid peroxidation and disintegration of membrane led to the death of PC12 cells. Summarily, the present study substantiated the potential of BSA-conjugated ZnS/CuS nano-composites as anti-cancer drug.     

Self-assembly of CuS nanoparticles to solid,hollow, spherical and tubular structures in a simple aqueous-phase reaction

We report fabrication of CuS particles with solid, hollow, spherical and tubular structures in a simple aqueous system under microwave irradiation, employing CuSO₄ and Na₂S₂O₃ as the starting materials without assistance of any surfactant or template. Energy-dispersive X-ray analysis and an X-ray powder diffraction pattern proved that the product is hexagonal CuS phase. The morphologies of the product were observed by scanning electron microscopy and transmission electron microscopy. Some factors affecting the morphologies of the product are discussed. PACS 81.05.Hd; 81.07.Bc; 81.16.Be; 81.16.Dn; 81.20.Ka     

Fabrication of well-aligned CdS nanotubes by CVD-template method

Well-aligned CdS nanotubes have been synthesized within the nanochannels of the porous anodic alumina (PAA) membranes by pyrolyzing cadmium bis(diethyldithiocarbamate) [Cd(S₂CNEt₂)₂] at 400 °C. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show that the CdS nanotubes are highly ordered with uniform diameter in range of 80-150 nm and the length up to tens of microns. X-ray diffraction (XRD), Raman spectrum, energy-dispersive spectroscopy (EDS) and selected-area electron diffraction (SAED) demonstrate that the nanotubes are composed of pure hexagonal phase polycrystalline CdS. The synthetic route can, in principle, be extended to fabricate other nanotubes of a wide range of semiconductors.     

Effects of synthesis methods of vanadium oxide nanotubes on the inter layer distances

Vanadium oxide nanotubes were synthesized via two methods: (1) Adding a template to vanadium oxide gels, (2) Grinding mixture of a template and vanadium oxide by using a ball mill. Influence of preparation method on structure of vanadium oxide nanotubes has been investigated. Vanadium oxide nanotubes has been characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Transmission electron microscopy (TEM) techniques.     

Green luminescence from triphenylphosphine functionalized single-wall carbon nanotubes

In a simple wet chemical process, purified single-wall carbon nanotubes (SWCNTs) are treated with triphenylphosphine (Ph₃P) at room temperature. The functionalized material is characterized by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared (FTIR) spectroscopy and Raman spectroscopy. HRTEM micrograph clearly reveals that triphenylphosphine nanocrystals of nearly uniform size are attached to the surfaces of SWCNTs. The hybrid structure shows remarkable green luminescence with peak emission at around 500 nm, under UV excitation. The photoluminescence may be attributed to charge transfer from the electron-donating phosphorous atoms to the carbon nanotubes.     

Synthesis,characterization, and electrochemical properties of imidazole derivatives functionalized single‐walled carbon nanotubes

The imidazole derivatives functionalized single‐walled carbon nanotubes (SWNTs) were synthesized by a diazonium‐based reaction. We have designed and synthesized two imidazole derivatives to modify SWNTs. The resulting products were characterized by Fourier transform infrared (FT‐IR) spectroscopy, Raman spectroscopy, ultraviolet visible (UV/Vis) spectroscopy, thermo gravimetric analysis (TGA), energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), and atomic force microscopy (AFM). Electrochemical measurements via a cyclic voltammetry method revealed that the weak intramolecular electronic interactions presented between the attached imidazole derivatives groups and the nanotubes. Copyright © 2008 John Wiley & Sons, Ltd.     

Template synthesis of well-aligned titanium dioxide nanotubes

TiO₂ nanotubes of the anatase form have been synthesized by sol-gel chemical method using anodic aluminum oxide (AAO) as a template. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction were used to investigate the structure and morphology of the TiO₂ nanotubes. The results showed that TiO₂ nanotubes obtained are highly ordered and uniform. The diameter and length of the obtained nanotubes were determined by the pore size and the thickness of AAO template. It was found that through control of immersion time of AAO membrane in sol, both tubules and fibrils can be prepared. PACS 61.46.+w     

Deposition of silver nanoparticles on carbon nanotube by chemical reduction method: Evaluation of surface,thermal and optical properties

Silver was stabilized on multi-walled carbon nanotubes (MWCNTs) by chemical-reduction technique using N,N-dimethylformamide (DMF) as a reducing agent. The influence of silver on the performance of carbon nanotubes (CNTs) was investigated by employing Fourier-transform infrared spectra (FTIR), Raman spectroscopy (RAS), thermal gravimetric analysis (TGA), zeta potential measurement, scanning electron microscope (SEM), electron dispersive X-ray spectrometer (EDX), transmission electron microscopy (TEM), and reflectance spectroscopy (RS). FTIR as well as RS methods evidenced the synthesis procedure using chemical reduction method was successful. Performing TGA of the samples under oxygen atmosphere demonstrated that the silver nanoparticles (Ag NPs) generated on MWCNTs surface can decrease the thermal stability of the particles by the catalytic oxidation of CNTs. In contrary, the thermal stability of the MWCNTs has improved under nitrogen atmosphere. EDX results showed the presence of Ag, Au and Co on the surface of deposited sample. The synthesised silver multi-walled carbon nanotubes (Ag–MWCNTs) were found to have higher UV reflection activity compared with untreated particles. The Ag–CNTs can be used in producing anti-UV composites.     

Studying the structure of nanocomposites obtained via the chemical decomposition of metal siloxanes in polymer matrices

The structure of polymer nanocomposites containing CuS clusters is studied by atom force (AFM), scanning (SEM), and transmission (TEM) electron microscopy, and by narrow-angle X-ray scattering (SAXS). The results point to the existence of spherical nanoparticles of 3?C50 nm in diameter and larger agglomerates of sizes 1?C5 ??m in the studied nanocomposites (NCs). The morphology of NCs depends on the conditions of synthesis.     

Ar离子溅射生成碳纳米管

用扫描电子显微镜(SEM)和透射电子显微镜(TE),研究了离子溅射石墨表面的形貌特征和结构,证实了碳纳米管可通过溅射原子在表面形貌突起部位沉积生长.     

Controlled synthesis of cuprous oxide nanospheres and copper sulfide hollow nanospheres

Uniform Cu₂O nanospheres have been successfully synthesized by reducing CuSO₄ with ascorbic acid in sucrose solution at room temperature. The diameter of the Cu₂O nanospheres can be tuned from 90 to 280 nm by adding different amounts of sucrose in the solution. Furthermore, CuS hollow nanospheres with different diameters have been obtained based on the Kirkendall effect using the as-prepared Cu₂O nanospheres as sacrificial templates. Cu₂O/Cu_7.2S₄ core/shell nanospheres and Cu_7.2S₄ hollow nanospheres are obtained as the intermediate products at different stages of the conversion process. Through the post-treatment of sodium citrate solution, Cu_7.2S₄ hollow nanospheres can be changed into CuS hollow nanospheres. The products are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and field-emission scanning electron microscopy (FESEM). Optical properties of the products have also been studied.     

A pigment (CuS) identified by micro‐Raman spectroscopy on a Chinese funerary lacquer ware of West Han Dynasty

A blue pigment was identified by micro‐Raman spectroscopy, X‐ray fluorescence spectroscopy (XRF), scanning electron microscopy (SEM)/energy dispersive X‐ray (EDX) and X‐ray diffraction (XRD). The test sample, a funerary lacquer tray, belongs to West Han Dynasty (206 BC–AD 8) of China and was decorated with faint blue patterns. The result from Raman spectroscopy showed that the faint blue is covellite (CuS) due to the presence of a characteristic peak at 474.5 cm⁻¹, which further was confirmed by XRF, SEM–EDX and XRD. This research indicated that CuS had been used as a blue pigment to decorate lacquer wares from the West Han Dynasty in China. Copyright © 2009 John Wiley & Sons, Ltd.     

High-density attachment of FePt nanoparticles on carbon nanotubes by a facile microwave-assisted polyol method

High-density attachment and one-dimensional (1D) array of FePt nanoparticles (NPs) along carbon nanotubes (CNTs) surface to generate FePt/CNT nanocomposites were successfully obtained via a facile CNT-mediated microwave polyol method. The as-prepared 1D FePt/CNTs is about 10–20 nm in diameter and up to μm scale in length. By adjusting the solvents, the ratio of Fe/Pt and the attached density of FePt NPs on the surface of CNTs could be well controlled. The structures, composition, and magnetic properties of the FePt/CNTs were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and magnetic measurements. The possible growth mechanism has also been proposed.     

Synthesis, characterization and low field emission of CNx nanotubes

Aligned CN_x nanotubes were fabricated by pyrolyzing ethylenediamine on p-type Si(1 1 1) substrates using iron as the catalyst. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectrum (XPS) and Raman spectroscopy were used to characterize the CN_x nanotubes. The CN_x nanotubes with the average length of 20 μm and diameters in the range of 50–100 nm have the “bamboo-like” structure and worse crystalline order. The low-field emission measurements of the CN_x nanotubes indicated that 20 μA/cm² current densities were observed at an electric field of 1.4 V/μm and 1.280 mA/cm² were obtained at 2.54 V/μm. The CN_x nanotubes exhibit better field emission properties than the carbon nanotubes and the BCN nanotubes. The emission mechanism of CN_x nanotubes is also discussed.     

Iron-doped titanium dioxide nanotubes: a study of electrical,optical, and magnetic properties

Abstract  

Iron doped titanium oxide nanotubes (TNTs) were synthesized by hydrometallurgical process using a mixture of NaOH and methanol as precipitating and reducing agents, respectively. Nanotubes with a high purity and good aspect ratio are produced as indicated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The characterization data show that high-purity Fe-doped TNTs with diameter around 12–14 nm and length around 400–460 nm are synthesized using this process. The TNTs are found to be in the anatase phase and as the Fe doping is increased, the conductivity increases. UV/VIS data suggest the red shift in the peaks and increased absorption on the account of doping. The studies on microcosmic magnetic properties of the sample with 15% Fe content indicate the component of magnetic moment in the axial direction of nanotubes. Doping of Fe is found to considerably affect the crystallite size, Curie temperature (T _c), DC conductivity (σ), and Raman shifts.     

Selective growth, characterization, and field emission performance of single-walled and few-walled carbon nanotubes by plasma enhanced chemical vapor deposition

Single-walled carbon nanotubes (SWCNTs) and few-walled carbon nanotubes (FWCNTs) have been selectively synthesized by plasma enhanced chemical vapor deposition at a relative low temperature (550 °C) by tuning the thickness of iron catalyst. The parametric study and the optimization of the nanotube growth were undertaken by varying inductive power, temperature, catalyst thickness, and plasma to substrate distance. When an iron film of 3-5 nm represented the catalyst thickness for growing FWCNT arrays, SWCNTs were synthesized by decreasing the catalyst thickness to 1 nm. The nanotubes were characterized by field emission scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. Electron field emission properties of the nanotubes indicate that the SWCNTs exhibit lower turn-on field compared to the FWCNTs, implying better field emission performance.     

New aspects on pulsed laser deposition of aligned carbon nanotubes

We have grown carbon nanotubes (CNT) by pulsed laser deposition (PLD) at 1000 °C in Ar atmosphere. A Nd/YAG laser was used for irradiation of a graphite target containing Ni and Co rods. High-resolution scanning electron microscopy (HRSEM) and transmission electron microscopy (TEM) images showed that “closed” carbon nanotubes were grown between clusters of metallic particles, so that the individual nanotubes were arranged in parallel to each other forming a shape of “Rope-Bridge”. The nanotubes structure was analyzed by high-resolution transmission electron microscopy (HRTEM) and their type was found to be of MWNT, containing about five SWNT. Total diameter was 5-20 nm and their length was about 1 μm. High homogeneous distribution carbon nanotubes were grown and different structures were observed such as well-aligned carbon nanotubes, bamboo-like and Y-junction carbon nanotubes.     

Photocatalytic photodegradation of xanthate over C, N, S-tridoped TiO2 nanotubes under visible light irradiation

C, N, S-tridoped TiO₂ nanotubes were synthesized via hydrothermal synthesis and post-treatment, and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), the Brunauer-Emmett-Teller method (BET), and UV-vis diffuse reflectance spectroscopy (DRS). The UV-diffuse reflectance spectra of all the C, N, S-tridoped TiO₂ nanotubes greatly extended the absorption edge to the visible light region, and the absorbance in the visible region increased with increasing molar ratio of thiourea to Ti (R), which could be attributed to C, N, S-tridoping in the form of cation C-doping, interstitial N-doping, cation S-doping, and adsorbed ions’ states. The photocatalytic activity of C, N, S-tridoped TiO₂ nanotubes was evaluated by photocatalytic photodegradation of potassium ethyl xanthate (KEX) under visible light irradiation. It was found that the photocatalytic activity of the prepared samples increased with increasing molar ratio of thiourea to Ti (R). At R=6, the photocatalytic activity of the tridoped sample TNTS-6 reached a maximum value. With further increase in R, photocatalytic activity of the sample decreased, which could be attributed to the high visible light activity resulting from the balance between visible light absorption and recombination of electron/hole pairs.