Facile synthesis methodology and characterization studies of silica-decorated hybridized anisotropic nanotubes and nanosheets

Carbonaceous nanomaterials and their derivatives have been inspired tremendous enthusiasm in the scientific community. They have been excogitated as the encouraging attributes and the qualified dispersed phase to develop multi-functional composites. Particularly, graphene and carbon nanotube (anisotropic fillers) have gained substantial research interest owing to their promising characteristics. This highlights an innovative technique to synthesize hybridized nanotube and nanosheet. Initially, parent materials have been synthesized: The pristine CNT has been modified by acid mixture solution, and reduced graphene oxide has been prepared by chemical reduction method. Henceforth, the self-assembly in situ sol–gel technique has been endorsed here. The synthesized nanohybrids have been characterized by different spectroscopic techniques: FTIR, Raman, UV, and XPS to confirm the attachment of multifunctionalities; meanwhile, the composition and stability have been investigated from XRD and TGA plots. The magnitude of surface charge and particle size distribution have been evaluated for the parent and hybridized products; further, morphology of all the samples has been authenticated from FESEM and TEM.     

Ethanol loading in an inductively coupled plasma

Changes to the fundamental and analytical parameters of a plasma have been investigated when ethanol has been added to aqueous or organic solutions. Excitation temperature, electron number density, and intensity of the H(alpha) line increased when ethanol has been added to aqueous solutions, while an electron density decrease and signal reduction have been found when ethanol has been added to xylene. The sensitivity has been improved for all ethanol concentrations when water has been the solvent, but the reverse has been found for xylene solutions.     

快原子轰击质谱及其在金属有机配合物研究中的应用

本文介绍FAB质谱的原理、功能和优点。综述了FAB机理,讨论了影响FAB谱的因素。归纳了FAB法在金属有机配合物研究中的应用。     

On temperature- and space-dimension dependent matter agglomerations in a mature growing stage

Model matter agglomerations, with temperature as leading control parameter, have been considered, and some of their characteristics have been studied. The primary interest has been focused on the grain volume fluctuations, the magnitude of which readily differentiates between two commonly encountered types of matter agglomeration/aggregation processes, observed roughly for high- and low-density matter organizations. The two distinguished types of matter arrangements have been described through the (entropic) potential driving the system. The impact of the potential type on the character of matter agglomeration has been studied, preferentially for (low-density) matter aggregation for which a logarithmic measure of its speed has been proposed. A common matter diffusion as well as mechanical relaxation picture, emerging during the mature growing stage, has been drawn using a phenomenological line of argumentation. Applications, mostly towards obtaining soft agglomerates or so-called jammed materials, have been mentioned.     

Theoretical Study of the AICI Disproportionation Reaction Mechanism on the Al(100) Surface

The surface disproportionation reaction mechanism of aluminum subchloride on the aluminum (100) surfaces has been investigated by the plane-wave density functional theory (DFT).Three kinds of possible reaction mechanism of AlCl disproportionation reaction on the aluminum (100)surfaces have been taken into account. The structures of reactants and products have been optimized, transition states have been confirmed and activation energies have been calculated. The adsorption energy of reactants and desorption energy of products have been determined. All of these have been employed to confirm the reaction mechanism and the rate determining step of AlCl disproportionation reaction on the aluminum (100) surfaces.     

Azacrownlactams Derived from Biphenyl. Study of Their Conformations, Complexation Ability and Electrochemical Behavior

Several macrolactams containing in their structure biphenyl and pyridine moieties have been synthesized. The complexation ability of these compounds has been evaluated and the results have been explained considering the existence of intramolecular hydrogen bonds. Conformational studies have been developed in some cases. Single-crystal X-ray diffraction studies have been carried out with one of the ligands. The electrochemical response of ligands 1 and 3 has been studied using cyclic and square wave voltammetry. The interaction of these ligands with Cu²⁺ ions in CH₃CN has been investigated by electrochemical techniques.     

Pt/HM、Pd/HM催化剂上CO氧化反应活性和动力学研究

研究了Pt/HM、Pd/HM催化剂上CO氧化反应的活性,求出了各种催化剂的CO氧化反应动力学方程。考察了不同气氛下CO氧化活性的演变规律和V⁴⁺、Co²⁺离子对Pt、Pd的助催化作用,并用催化剂集团结构适应模型对以上结果作出了解释。     

飞行时间二次离子质谱(TOF-SIMS)结合化学衍生法分析杂环新化合物的结构

飞行时间二次离子质谱(TOF-SIMS)分析了难挥发的杂环新化合物咪唑啉硫氰酸盐及其三种衍生物, 确认出很强的氢离化及银离化准分子离子峰, 通过对各种衍生物谱图的对照分析, 确认出较强的含有结构特征的碎片离子峰, 并对该化合物在离子轰击下的裂解规律作了分析, 支持了对该新化合物结构的鉴定。     

ClO与ClO自由基反应机理及电子密度拓扑分析

利用密度泛函理论对ClO与ClO自由基反应机理进行了深入理论探讨,在B3LYP/6-311＋＋G（3df）水平上对该反应体系的反应物、中间体、过渡态及产物进行了几何构型优化,对反应通道进行了IRC(内禀反应坐标）路径解析,计算了沿各反应通道的能垒和离解能,并进行了零点能校正.从量子拓扑学的角度,对反应通道IRC途径上一些重要点进行了电子密度拓扑分析,讨论了反应过程中化学键的断裂、生成以及键的变化规律,找到了反应途径的能量过渡态和结构过渡态.     

Determination of antioxidant migration levels from low-density polyethylene films into food simulants

An analytical method for the determination of specific migration levels of phenolic antioxidants from low-density polyethylene (LDPE) into food simulant has been developed. The screening and response surface experimental designs to optimize the liquid-liquid extraction (LLE) of these antioxidants have been tested and the analyses have been carried out by reversed-phase high-performance liquid chromatography (HPLC) coupled with ultraviolet diode-array detector. The procedure developed has been applied to specific migration tests in different commercial LDPE films. The considered antioxidants have not been found upper the legislation limits although Ethanox 330 and Irgafos 168 have been found at trace level.     

Total Syntheses of 11-Acetoxy-4-deoxyasbestinin D, 4-Deoxyasbestinin C,Asbestinin-10, -20, -21 and -23

Six members of the asbestinin family of marine diterpene natural products have been synthesized in an efficient and stereoselective manner from a single oxa-bridged intermediate. Five of these natural products have not been synthesized previously and the structures of four of them have been confirmed as those proposed originally or following revisions to the original structures. The fifth natural product—asbestinin-21—has been shown to be a diastereomer of the compound that had been proposed previously.     

Polymers from 12-hydroxymethyltetrahydroabietic acid and its vinyl and acrylate esters

12-Hydroxymethyltetrahydroabietic acid has been homopolymerized by melt condensation and homopolyester has been obtained. Vinyl 12-hydroxymethyltetrahydroabietate has been prepared from 12-hydroxymethyltetrahydroabietic acid by vinyl interchange procedure with vinyl acetate, and has been homopolymerized, copolymerized with vinyl chloride, vinyl acetate, and terpolymerized with styrene and acrylonitrile. The acrylate ester of 12-hydroxymethyltetrahydroabietic acid also has been prepared from 12-hydroxymethyltetrahydroabietic acid and acrylyl chloride. The acrylate thus obtained has been homopolymerized and copolymerized with vinyl chloride and vinyl acetate. Polymers thus obtained have been characterized.     

The Growth of KLN Crystals

１ＩＮＴＲＯＤＵＣＴＩＯＮＣｒｙｓｔａｌｏｆＫ３Ｌｉ２＋ｘＮｂ５＋ｘＯ１５＋２ｘｉｓａｆｅｒｏｅｌｅｃｔｒｉｃｃｒｙｓｔａｌｂｅｌｏｎｇｉｎｇｔｏｔｅｔｒａｇｏｎａｌｓｙｓｔｅｍｗｉｔｈｔｈｅｓｔｒｕｃｔｕｒｅｏｆｔｈｅｍｉｎｅｒａｌｔｕｎｇｓｔｅｎ...     

新型咪唑啉酮类化合物的拉曼光谱特性研究

本文研究了四种新型咪唑啉酮类化合物的拉曼光谱,在对拉曼谱峰进行归属的基础上,确定了化合物的空间伸展形态,并对其除草活性的影响因素进行了探讨.     

Free volume in plasticized polyvinyl chloride

Positron lifetimes measurements in pure polyvinyl chloride (PVC) and in the plasticized PVC have been performed. Dioctyl phthalate has been used as a plasticizer. Samples have been prepared of the PVC with eight different plasticizer concentrations (from 0 to 35% of the plasticizer in the PVC). All of the measurements have been performed in air at room temperature. A conventional fast-slow coincidence lifetime spectrometer has been used for the measurements. Mean free volumes radii have been calculated from the lifetime data. It has been found that the mean free volumes radii are in the investigated region of plasticizer concentrations a linear function of the concentration of the dioctyl phthalate in the PVC. © 1996 John Wiley & Sons, Inc.     

CE Determination of Monosaccharides in Pulp Using Indirect Detection and Curve-Fitting

In the present work a capillary electrophoretic method for the analysis of monosaccharides utilizing indirect UV-detection has been developed. Different probes for indirect detection have been assessed using model carbohydrate samples. Background electrolytes with or without addition of cetyltrimethylammonium bromide have also been evaluated regarding the separation power. Furthermore, a curve-fitting algorithm has been introduced to increase the separation resolution. The optimized method has been used for analysis of monosaccharides from an acidically hydrolyzed pulp sample.     

Ionization probability of the hydrogen atom suddenly released from confinement

The problem of the stability of a confined atom when it is extracted from the confining cavity has been investigated, modeled by a spherical hard wall potential. The ionization probability when the atom is released from confinement has been obtained. The dependence of the ionization probability on the confinement radius and on the quantum numbers of the initial confined state has been studied. The probability density function of the ionization energy of the ejected electron has been obtained for the different cases considered. The oscillatory structure of this distribution function, with a principal maximum located in the neighborhood of the energy of the initial state and minima very close to zero has been elucidated. The sudden approximation has been applied and the analytic continuation method has been used to calculate the different stationary states.     

Electrokinetic studies on a thorium oxide membrane : I. Electroosmosis and electrophoresis

Electroosmotic transport of dimethyl formamide through a thorium oxide plug membrahe has been studied and the data have been analysed from the standpoint of thermodynamics of irreversible processes. Electroosmotic flow and eleetroosmotic pressure have been found to be nonlinearly dependent on the applied potential difference. Various phenomenological coefficients have been evaluated from the nonlinear transport equation. Onsager's reciprocity relation has been verified by measurements of streaming potentials. The electrophoretic velocity of thorium oxide particles dispersed in dimethyl formamide has also been found to be nonlinear. Zeta potentials have been evaluated from electroosmotic and electrophoretic data. The results have been explained on the basis of the change in the structure of the electrical double layer. The degree of coupling and the efficiency of electrokinetic energy conversion have been calculated for both electroosmosis and streaming potential.     

Overpressured thin-layer chromatography

The properties, apparatus and applications of overpressured thin-layer chromatography (OPTLC) have been reviewed. In the Introduction planar chromatography has been briefly characterized, with particular attention to TLC. The general properties of OPTLC and methods of development of chromatograms in this technique have been then given. The construction of chambers and equipment for OPTLC has been described, paying attention to two-dimensional columns. The properties of chambers for OPTLC have been characterized considering the flow of eluent, sorbent-eluent interactions and the efficiency of various systems. OPTLC, TLC and HPTLC have been compared and also a comparison between OPTLC with a constant (linear) eluent flow-rate and with a decreasing eluent flow-rate has been made. Analytical applications of OPTLC have been described and examples of separations of mixtures have been given.     

Interaction between polyelectrolyte gels and surfactants of opposite charge

Investigations dealing with fundamental aspects of the interaction between covalently cross-linked polyelectrolyte gels and oppositely charged surfactants are reviewed. For reference, a brief summary of results from recent studies of associative phase separation in linear polyelectrolyte/surfactant mixtures is also included. It is found that great progress has been made in several sub-areas since the first reports appeared in the early 1990's. The frequently observed surfactant-induced volume transition has been studied in detail. Its relation to associative phase separation in solutions and the important role of polyion-mediated micelle–micelle attractions have been clarified. Phase separation in gels, in particular core/shell structures, has been studied in great detail. The importance of network mediated elastic forces between two phases coexisting in the same gel has been demonstrated and some of their consequences have been clarified. Hydrophobic interactions between polyion and micelle have been found to have strong effects on both binding and swelling isotherms. The effect of salt, which has been found to sometimes disfavor, sometimes promote surfactant binding, is quite well understood. The microstructure of gels in the collapsed state has been studied in great detail and is often found to be highly ordered, resembling liquid crystalline phases common to surfactant/water systems. The kinetics of surfactant binding and the associated volume change has been investigated to some extent. Progress has been made for gels displaying phase separation during the volume transition.