Coadsorption of CN and O on Cu (1 0 0) surface: A density functional study

The adsorption of cyanide (CN) or oxygen atom, as well as the coadsorption of CN + O on Cu (1 0 0) surface is studied by using density functional theory (DFT) and the cluster model method. Cu₁₄ cluster is used to simulate the surface. Perpendicular and parallel bonding geometries of CN adsorbed on Cu (1 0 0) surface are considered, respectively. The present calculations show that the CN may be absorbed on top and bridge sites by carbon atom of cyanide (C-down), and C-down on top site is the most favorable. The adsorbed C-N stretch frequencies compared with that of the gaseous CN species are all red-shifted, except the C-down on top site. The charge transfer from the surface to the CN species leads to an increase in work function for the Cu surface. The oxygen atom adsorbed on the four-fold hollow site of Cu (1 0 0) is the most favorable, and is consistent with the experimental study. The coadsorption of O at a four-fold hollow site tends to block adsorption of CN at the nearby sites. If O coverage increases, the CN may be adsorbed on the top and bridges sites with the C-down model. The reaction CN + O → OCN on the Cu (1 0 0) is predicted to be exothermic, and formed OCN species may be stably absorbed on the Cu (1 0 0).     

A theoretical study of Ge adsorption on Si(0 0 1) covered with Bi nanolines

The energetic stability and the equilibrium geometry of Ge adsorption on the Si(0 0 1) surface covered with Bi nanolines were examined by ab initio total energy calculations. We find that there is an energetic preference of Ge atoms lying on the Si(0 0 1) terraces, forming Si^down-Ge^up mixed dimers. Further investigations reveal a repulsive interaction between the mixed dimers and the Bi nanolines, suggesting that the formation of Si^down-Ge^up dimers can be tailored by the presence of the Bi nanolines.     

Coverage-dependent absorption of atomic hydrogen into the sub-surface of Cu(1 1 1) studied by density-functional-theory calculations

With density-functional-theory calculations, we have studied coverage-dependent absorption of H atoms into the sub-surface below a face-centered-cubic (fcc) hollow site of Cu(1 1 1). Both frozen and relaxed surface lattices were considered when the atomic H migrated from the surface to the sub-surface. The potential energy curve for the absorbing H shows that the surface site is in general favored over the sub-surface site, and this trend varies little with the H coverage (0.11-0.67 ML). If the hexagonal-close-packed (hcp) hollow sites immediately vicinal to the absorbing H are pre-adsorbed with other H atoms, the surface adsorption potential is greatly increased, because of the repulsive H-H interaction, to a value near, or even greater than, the sub-surface absorption potential; when two or three H atoms (on the hcp sites) are beside the absorbing H, the energy barrier for the sub-surface absorption is decreased, whereas that for diffusion from the sub-surface to the surface is enhanced. These results indicate that, on an H-saturated Cu(1 1 1) surface (0.67 ML), the sub-surface sites below the fcc sites with two or three neighboring H atoms can trap the sub-surface H.     

Study of vacancy on diamond (1 0 0) (2 × 1) surface from first-principles

Structure and energy related properties of neutral and charged vacancies on relaxed diamond (1 0 0) (2 × 1) surface were investigated by means of density functional theory. Calculations indicate that the diffusion of a single vacancy from the top surface layer to the second layer is not energetically favored. Analysis of energies in charged system shows that neutral state is most stable on diamond (1 0 0) (2 × 1) surface. The multiplicity of possible states can exist on diamond (1 0 0) surface in dependence on the surface Fermi level, which supports that surface diffusion of a vacancy is mediated by the change of vacancy charge states. Analysis of density of states shows surface vacancy can be effectively measured by photoelectricity technology.     

The dissociative adsorption of borane on the Ge(1 0 0)-2 × 1 surface: A density functional theory study

By means of cluster models coupled with density functional theory, we have studied the hydroboration of the Ge(1 0 0)-2 × 1 surface with BH₃. It was found that the Ge(1 0 0) surface exhibits rather different surface reactivity toward the dissociative adsorption of BH₃ compared to the C(1 0 0) and Si(1 0 0) surfaces. The strong interaction still exists between the as-formed BH₂ and H adspeices although the dissociative adsorption of BH₃ on the Ge(1 0 0) surface occurs readily, which is in distinct contrast to that on the C(1 0 0) and Si(1 0 0) surfaces. This can be understood by the electrophilic nature of the down Ge atom, which makes it unfavourable to form a GeH bond with the dissociating proton-like hydrogen. Alternatively, it can be attributed to the weak proton affinity of the Ge(1 0 0) surface. Nevertheless, the overall dissociative adsorption of BH₃ on group IV semiconductor surfaces is favourable both thermodynamically and kinetically, suggesting the interesting analogy and similar diversity chemistry of solid surface in the same group.     

A semi-empirical study of polyacene molecules adsorbed on a Cu(1 1 0) surface

To describe the adsorption of large organic molecules on metal surfaces, to calculate the corresponding diffusion and rotation barriers, the semi-empirical mono-electronic Hamiltonian of the ASED molecular orbital method have been completed to take into account three body interaction terms. The full re-parametrization of this ASED+ version of ASED was determined on the specific case of benzene adsorbed on Cu(1 1 0) and a full transferability assumed for the member of the polyacene series also adsorbed on Cu(1 1 0). The adsorption energies, geometries, diffusion and rotation barriers are very well described by this new semi-empirical technique of calculation opening the way of optimizing larger conjugated molecule on surface for uni-molecular mechanics or electronics.     

Solvent effects on adsorption of CO over CuCl(1 1 1) surface: A density functional theory study

DFT calculations have been performed to investigate the effect of dielectric responses of the solvent environment on the CO adsorption over CuCl(1 1 1) surface by using COSMO (conductor-like solvent model) model in Dmol³. Different dielectric constants, including vacuum, liquid paraffin, methylene chloride, methanol and water solution, are considered. The effects of solvent model on the structural parameters, adsorption energies and vibrational frequency of CO adsorption over CuCl(1 1 1) surface have been investigated. The calculation results suggest that solvent effects can improve the stability of CO adsorption and reduce the intensity of C-O bond, which might mean that solvent is in favor of C-O bond activation and improve the reaction activity of oxidative carbonylation in a slurry reactor.     

Adsorption and dissociation of O2 on CuCl(1 1 1) surface: A density functional theory study

The adsorption and dissociation of O₂ on CuCl(1 1 1) surface have been systematically studied by the density functional theory (DFT) slab calculations. Different kinds of possible modes of atomic O and molecular O₂ adsorbed on CuCl(1 1 1) surface and possible dissociation pathways are identified, and the optimized geometry, adsorption energy, vibrational frequency and Mulliken charge are obtained. The calculated results show that the favorable adsorption occurs at hollow site for O atom, and molecular O₂ lying flatly on the surface with one O atom binding with top Cu atom is the most stable adsorption configuration. The O-O stretching vibrational frequencies are significantly red-shifted, and the charges transferred from CuCl to oxygen. Upon O₂ adsorption, the oxygen species adsorbed on CuCl(1 1 1) surface mainly shows the characteristic of the superoxo (O₂⁻), which primarily contributes to improving the catalytic activity of CuCl, meanwhile, a small quantity of O₂ dissociation into atomic O also occur, which need to overcome very large activation barrier. Our results can provide some microscopic information for the catalytic mechanism of DMC synthesis over CuCl catalyst from oxidative carbonylation of methanol.     

Thermal reactions of 2-iodoethanol on Cu(1 0 0)

Temperature-programmed reaction/desorption, X-ray photoelectron spectroscopy, and reflection-absorption infrared spectroscopy have been employed to investigate the reactions of ICH₂CH₂OH on Cu(1 0 0) under ultrahigh-vacuum conditions. ICH₂CH₂OH can dissociate on Cu(1 0 0) at 100 K, forming a -CH₂CH₂OH surface intermediate. Density functional theory calculations predict that the -CH₂CH₂OH is most probably adsorbed on atop site. -CH₂CH₂OH on Cu(1 0 0) further decomposes to yield C₂H₄ below 270 K. No evidence shows the formation of -CH₂CH₂O- intermediate in the reactions of ICH₂CH₂OH on Cu(1 0 0) in contrast to the decomposition of BrCH₂CH₂OH on Cu(1 0 0) and ICH₂CH₂OH on Ag(1 1 1) and Ag(1 1 0), exhibiting the effects of carbon-halogen bonds and metal surfaces.     

A fully-relativistic full-potential-linearized-augmented-plane-wave study of the (1 1 1) surface of δ-Pu

Full-potential linearized-augmented-plane-wave calculations indicate that the antiferromagnetic state including spin-orbit coupling effect is the ground state of bulk δ-Pu with a lattice constant of 8.66 a.u. and a bulk modulus of 32.8 GPa. It is found that spin-polarization and spin-orbit coupling effects play competing roles in the localization to delocalization behavior of 5f electrons. The optimized lattice constants of δ-Pu bulk are used to calculate the electronic structure properties of δ-Pu(1 1 1) films up to seven layers at six theoretical levels, namely non-spin-polarized-no-spin-orbit-coupling (NSP-NSO), non-spin-polarized-spin-orbit-coupling (NSP-SO), spin-polarized-no-spin-orbit-coupling (SP-NSO), spin-polarized-spin-orbit-coupling (SP-SO), antiferromagnetic-no-spin-orbit-coupling (AFM-NSO), and antiferromagnetic-spin-orbit-coupling (AFM-SO). For the δ-Pu(1 1 1) films also, AFM-SO is found to be the ground state. For the films, surface energy rapidly converges and the semi-infinite surface energy is predicted to be 1.16 J/m². On the other hand, the magnetic moments show an oscillating behavior, gradually approaching the bulk value of zero with increase in the number of layers. It is also predicted that the work function of δ-Pu(1 1 1) films at the AFM-SO ground state is approximately 3.41 eV, and the work function shows some oscillations when the number of layers is less than five, while it becomes relatively stable when the number of layers is greater than five. This suggests that a 3-layer film might be sufficient for computations of, for example, adsorption energies while a 5-layer film may be necessary for precise computations of, for example, adsorbate-induced work function shifts. The calculated results are compared with other experimental and theoretical results in the literature and the agreements between them are excellent, given the complexity of the physical systems and different computational formalisms.     

A periodic density functional theory study of the dehydrogenation of methanol over CuCl(1 1 1) surface

The decomposition of methanol on clean and oxygen-precovered CuCl(1 1 1) surface have been studied with the method of density functional theory-generalized gradient approximation (DFT-GGA) and the periodic slab models. The effects of different methanol coverages up to one monolayer are investigated. The activation of the O-H bond of methanol to form the methoxide intermediate, the activation of the C-H bond to form the hydroxymethyl intermediate and the activation of the C-O bond to form methyl are examined. These intermediates can subsequently react to form methoxide, hydroxymethyl, methyl, formaldehyde, formyl, and finally CO on the surface. The chemisorption energies of CH₃OH, CH₃O, H₂COH, CH₃, H₂CO, HCO, OH and CO at their most favorable adsorption sites are predicted to be −57.9, −235.3, −172.9, −170.5, −67.8, −192.4, −309.5 and −105.7 kJ/mol, respectively. We also confirm that the O-H bond-breaking paths have lower energy barrier, compared to the C-O and C-H bond-breaking paths. However, these reactions need a lower energy barrier when precovered oxygen atoms participate in these reactions.     

Characterization of diamond (1 0 0) surface with oxygen termination

Ab initio density functional theory (DFT) was employed to study reconstructions of diamond (1 0 0) surfaces in the presence of hydrogen, oxygen and hydroxyl. Clean and (2 × 1):1H surfaces are taken as reference. The properties of oxidization diamond surfaces with several adsorption structures, namely, O-on-top (OT) site, O-bridge (BR) site, hydroxyl (-OH), hydroxyl/hydroxyl, OT/hydroxyl, BR/hydroxyl have been considered. The calculated results indicate that the BR model is much more stable than the OT model, and the most energetically favorable structures of oxygenated surfaces are those with chemisorbed hydroxyl (-OH) group. Furthermore, the stability of the structures is also discussed from the point of HOMO-LUMO gap. Analysis of electronic structures shows that the presence of hydrogen induces surface conductivity whereas oxygen weakens it.     

A first-principles study of C + O reaction on NiCo(1 1 1) surface

A density-functional theory method has been conducted to investigate the association of C + O on (1 1 1) facets of ordered NiCo alloy and the results have been compared with those obtained on pure Ni(1 1 1) surface. In reaction of C + O, the favorable reaction path is that C adsorbed on HCP-1 site moves to the nearest Ni-Co bridge site, and associates with O migrating from FCC-1 site to result in CO adsorbed on the bridge site of Ni-Co. However, the reaction barrier is higher by 0.35 eV than that on pure Ni(1 1 1), which indicates that the incorporation of Co into the Ni crystal is not in favor of the reaction of carbon delimination.     

Li ion neutralization on Ag layers grown on Cu(1 1 1)

Electron transfer processes in the neutralization of Li⁺ ions on Ag layers grown on Cu(1 1 1) are investigated in quest of quantum confinement effects. Neutralization probabilities in the scattering of Li⁺ for incident ion energies in the 300 eV to 2 keV range are reported for Ag coverages ranging from 0.15 ML to 5 ML. Results are compared to those for Ag(1 1 1) and Cu(1 1 1) surfaces of bulk crystals. Although existing studies of the characteristics of Ag layers on Cu(1 1 1) indicate significant differences in electronic structure as a function of film thickness, the electron transfer probabilities we measure are found to be very close to those for bulk Ag(1 1 1). These results are commented on the basis of existing models and earlier studies of Li ion neutralization on various metals.     

Spin-engineering in the Co75Fe25/Cu(1 1 0) system

We present results on the growth and magnetic anisotropies of Co₇₅Fe₂₅ films grown on a Cu(1 1 0) single crystal. Angular dependent MOKE measurements show a thickness dependent, in-plane rotation of the easy axis of magnetisation of up to 60° from the [0 0 1] direction (towards [−1 1 0]). For a film thickness of 5 ML, just greater than that required for the onset of ferromagnetism, uniaxial anisotropy is observed with the easy axis along the [0 0 1] direction. As the film thickness increases this is seen to rotate in-plane towards the [−1 1 0] direction as the contribution from the cubic anisotropy constant grows. At a film thickness of 9 ML there is predominantly cubic anisotropy and at 10 ML the easy axis is rotated to 150° with respect to the [1 −1 0] axis, where it is stabilised.     

Infrared reflection absorption spectroscopic study of the adsorption structures of dimethyl ether and methyl ethyl ether on Cu(1 1 1) and Ag(1 1 1)

Infrared reflection absorption (IRA) spectra measured for dimethyl ether (DME) adsorbed at 80 K on Cu(1 1 1) and Ag(1 1 1) give IR bands belonging only to the A₁ and B₂ species, indicating that the adsorbate takes on an orientation in which the C₂ axis bisecting the COC bond angle tilts away from the surface normal within the plane perpendicular to the substrates. The DFT method was applied to simulate the IRA spectra, indicating that the tilt angles of DME on Cu(1 1 1) and Ag(1 1 1) are about 50° and 55°, respectively, at submonolayer coverages. The results are in contrast to the case of DME on Cu(1 1 0) and Ag(1 1 0), where the C₂ axis is perpendicular to the substrates [T. Kiyohara et al., J. Phys. Chem. A 106 (2002) 3469]. Methyl ethyl ether (MEE) adsorbed at 80 K on Cu(1 1 1) gives IRA bands mainly ascribable to the gauche (G) form, whereas the IRA spectra measured for MEE on Ag(1 1 1) are characterized by the trans (T) form. The rotational isomers are identical with those on Cu(1 1 0) and Ag(1 1 0); i.e., MEE on Cu(1 1 0) takes the G form and the adsorbate on Ag(1 1 0) the T form [T. Kiyohara et al., J. Phys. Chem. B 107 (2003) 5008]. The simulation of the IRA spectra indicated that (i) the G form adsorbate on Cu(1 1 1) takes an orientation, in which the axis bisecting the COC bond angle tilts away from the surface normal by ca. 30° within the plane perpendicular to the surface to make the CH₃-CH₂ bond almost parallel to the surface, and (ii) the T form adsorbate on Ag(1 1 1) takes an orientation, in which the bisecting axis tilts away by ca. 60° from the surface normal within the perpendicular plane. Comparison of these adsorption structures of MEE on the (1 1 1) substrates with those of MEE on Cu(1 1 0) and Ag(1 1 0) indicates that the structures are mainly determined by a coordination interaction of the oxygen atom to the surface metals and an attractive van der Waals interaction between the ethyl group of MEE and the substrate surfaces. The coordination interaction plays an important role on Cu(1 1 1) and Cu(1 1 0), which makes the adsorbate on the Cu substrates to take the orientations with the bisecting axis near parallel to the surface normal and to assume the G form in order to make the ethyl group parallel to the surface, which is favorable for the van der Waals interaction. In the case of MEE on the Ag substrates the attractive van der Waals interaction plays a dominant role, resulting in the T form which is more favorable for the interaction than the G form.     

Adsorption and reaction of methanethiol on the Ru(0 0 0 1)-p(2 × 2)O surface: A TPD and XPS study

Methanethiol adsorbed on Ru(0 0 0 1)-p(2 × 2)O has been studied by TPD and XPS. The dissociation of methanethiol to methylthiolate and hydrogen at 90 K is evidenced by the observation of hydroxyl and water. The saturation coverage of methylthiolate is ∼0.15 ML, measured by both XPS and TPD. A detailed analysis suggests that only the hcp-hollow sites have been occupied. Upon annealing the surface, water and hydroxyl desorb from the surface at ∼210 K. Methylthiolate decomposes to methyl radical and atomic sulphur via C-S cleavage between 350 and 450 K. Some methyl radicals (0.05 ML) have been transferred to Ru atoms before they decompose to carbon and hydrogen. The rest of methyl radicals desorb as gaseous phase. No evidence for the transfer of methyl radical to surface oxygen has been found.     

Nanostructure formation aided by self-organised Bi nanolines on Si(0 0 1)

We provide a mini review of recent theoretical investigations of nanostructure formation aided by self-organised Bi nanolines on the Si(0 0 1) surface. It is suggested that hydrogen-passivated single-domain Si(0 0 1) produced by the formation of defect-free, hundreds of nm long, and 1.2-1.5 nm wide Bi nanolines provides an appealing template with preferential sites for adsorption of other elements. Based on ab initio pseudopotential calculations it is suggested that using the Bi nanoline template it should be possible to grow the following structures: mixed Ge-Si dimer structures on the Si(0 0 1) terrace between two neighbouring Bi nanolines; small In nanoclusters along the nanoline; and line and cluster structures of Fe atoms with novel electronic and magnetic properties.     

Adsorption of organic molecules by photochemical reaction on Cl:Si(1 1 1) and H:Si(1 1 1) evaluated by HREELS

The covalent attachment of alkyl groups to silicon surfaces, via carbon-silicon bond formation, has been attempted using gas-surface reactions starting from Cl-terminated Si(1 1 1) or H:Si(1 1 1) under ultraviolet light irradiation. The formation of Cl-terminated Si(1 1 1) and its resulting stability were examined prior to deposition of organic molecules. High-resolution electron energy loss spectroscopy (HREELS) was utilized for detecting surface-bound adsorbates. The detection of photo-deposited organic species on Cl:Si(1 1 1) from gas-phase CH₄ or CH₂CH₂ was not significant. On H:Si(1 1 1), it was evident that after the photoreaction with gas-phase C₂H₅Cl, C₂H₅ groups were chemically bonded to the surface Si atoms through single covalent bonds. The C₂H₅ groups were thermally stable at temperatures below 600 K. Alkyl monolayers prepared on silicon surfaces by dry process will lead to a new prospective technology of nanoscale fabrication and biochemical applications.     

First-principle study of NO adsorption on the LaFeO3 (0 1 0) surface

The adsorption of NO molecule on the LaFeO₃ (0 1 0) surface was studied using first-principle calculations based on density functional theory. The calculated results indicate that the Fe-top site is the most favorable for NO adsorption. The N-O bond length, Mulliken charge, and the N-O vibration frequency of the NO molecule are discussed after adsorption. The analysis results of the density of the states show that when NO is adsorbed with the Fe-NO configuration, the bonding mechanism is mainly from the interaction between the NO and the Fe d orbit.