Charge transfer interaction and electrical conductivity of poly(vinyl acetals) containing dispersed TCNQ radical anion salts

Charge transfer (CT) interaction is described in semiconducting dispersions of TCNQ complex salt \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm Et}_3 {\rm NH}^+ ({\rm TCNQ})_2^{\cdot^{\hskip-3.7pt\hbox{--}}}$\end{document} with and without added TCNQ°, in poly(vinyl acetal) matrices in which the electron-donor moiety is varied. The extent of CT interaction was determined in films and in solution (DMF, acetonitrile, or methylene chloride) through the absorbances at 398 nm (\documentclass{article}\pagestyle{empty}\begin{document}$ {\rm TCNQ}{\ }^{\cdot^{\hskip-3.7pt\hbox{--}}}$\end{document} and TCNQ°) and 857 nm \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm TCNQ}{\ }^{\cdot^{\hskip-3.7pt\hbox{--}}}$\end{document}. Resistivity of the conductive films was related to the stoichiometry of TCNQ species in the films and found to have a minimum at \documentclass{article}\pagestyle{empty}\begin{document}$[{\rm TCNQ}^\circ]/[{\rm TCNQ}{\ }^{\cdot^{\hskip-3.7pt\hbox{--}}}]\simeq 1$\end{document}. Lower resistivities were attained with films having a uniform, densely packed dispersion of microcrystallites which were obtained at a relatively slow solvent removal rate. With this particular complex salt, strong electron-donor polymers are found to be better matrices for semiconductivity.     

Alternating copolymerization of dienes with α-olefins

Alternating copolymerization of butadiene with several α-olefins and of isoprene with propylene were investigated by using a mixture of VO(Acac)₂, Et₃Al, and Et₂AlCl as catalyst. The alternating copolymerization ability of the olefins decreases in the order, propylene > 1-butene > 4-methyl-1-pentene > 3-methyl-1-butene. The study on the sequence of the copolymer of isoprene with propylene by ozonolysis reveals that the polymer chain is reasonably expressed by the sequence \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH}_{\rm 2} \hbox{--} {\rm CH} \hbox{=\hskip-1pt=} {\rm C(CH}_{\rm 3}) \hbox{--} {\rm CH}_{\rm 2} \hbox{--} {\rm CH(CH}_{\rm 3}) \hbox{--} {\rm CH}_{\rm 2} \rlap{--}]_n $\end{document}. NMR and infrared spectra indicate that the chain is terminated with propylene unit, forming a structure of ?C(CH₃)? CH₂? C(CH₃)?CH₂ involving a vinylene group.     

Polymerization of σ-bonded organo-transition metal derivatives of styrene

Five new monomers of transition metal complexes containing a styryl group, trans-\documentclass{article}\pagestyle{empty}\begin{document}$ {\rm Pd}({\rm PBu}_{\rm 3})_2 \rlap{--} ({\rm C}_6 {\rm H}_4 {\rm CH} \hbox{=\hskip-2pt=} {\rm CH}_2 ){\rm X\ X \hbox{=\hskip-2pt=} Cl(Ia),\ X \hbox{=\hskip-2pt=} Br(Ib)},\ {\rm X \hbox{=\hskip-2pt=} CN(Ic),\ X \hbox{=\hskip-2pt=} Ph(Id)} $\end{document} and trans-\documentclass{article}\pagestyle{empty}\begin{document}${\rm Pt(PBu}_{\rm 3} {\rm )}_{\rm 2} \rlap{--} ({\rm C}_{\rm 6} {\rm H}_{\rm 4} {\rm CH} \hbox{=\hskip-2pt=} {\rm CH}_2 ){\rm Cl}({\rm II})$\end{document}, were synthesized. The monomers were readily homopolymerized in benzene with the use of AIBN or BBu₃–oxygen as the initiator. Copolymerization of Ia with styrene was carried out by using AIBN. From the Cl content of the copolymers by analysis, monomer reactivity ratios and Q–e values were obtained as follows: r₁ = 1.49, r₂ = 0.45; Q₂ = 0.41, e₂ = ?1.4 (M₁ = styrene, M₂ = Ia). Based on the above data, the σ-bonded palladium moiety at para position of styrene acts as a strongly electron-donating group to the phenyl ring. This is also supported by the olefinic β-carbon chemical shift of ¹³C NMR for Ia.     

Méthodes chimiques d'analyse des polyacroléines linéaires

Linear polyacroleins prepared by anionic polymerization give the structural repeat units of the types \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--}[{\rm CH}\left( {{\rm CHO}} \right)\hbox{--} {\rm CH}_{\rm 2} {\rm \rlap{--} ], \rlap{--} [CH}_{\rm 2} \hbox{--} {\rm CH}\left( {{\rm CHO}} \right)\rlap{--} ], $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH}\left( {{\rm CH}\hbox {\rm CH}_2 } \right)\hbox{\rm O\rlap{--} ]} $\end{document} without any cyclization. Analysis of these polymers by several methods reveal the nature and amount of each structural species, and an estimation of their distribution along the polymeric chain.     

High temperature polymers. I.—Sulfone ether diamines as intermediates for tractable high temperature polymers

A useful synthesis of a series of new aromatic sulfone ether diamines, H₂NC₆H₄O\documentclass{article}\pagestyle{empty}\begin{document}$\hbox{---}\hskip-5pt[\ {\rm C}_{\rm 2} {\rm H}_{\rm 4} {\rm SO}_{\rm 2} {\rm C}_{\rm 6} {\rm H}_{\rm 4} \hbox{--} {\rm ORO}\hbox{---}\hskip-5pt ]_n {\rm OC}_{\rm 6} {\rm H}_{\rm 4} {\rm SO}_{\rm 2} {\rm C}_{\rm 6} {\rm H}_{\rm 4} \hbox{---} {\rm OC}_{\rm 6} {\rm H}_{\rm 4} {\rm NH}_{\rm 2} $\end{document}, where n = 0, 1, 2…, which increases the tractability of polyimides, polyamide-imides, and polyamides, was developed. These diamines were prepared by condensing various proportions of sodium p-aminophenate, sodium bisphenates, and dichlorodiphenyl sulfone. The synthetic procedures are now refined to the point where simply coagulating these diamines into water yields high purity polymer-grade sulfone ether diamines. The latter have good tractability; and in some cases, it is possible to extrude and injection-mold these high temperature polymers.     

Transient and steady rheology of polydisperse entangled melts. Predictions of a kinetic network model and data comparisons

The kinetic network (KN) model discussed previously in the context of monodisperse and bimodal polymer systems is extended to polymers of arbitrary molecular weight distribution. A generalization is proposed for the flow-dependent entanglement loss term in the structure equation, replacing the shear rate \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \gamma $\end{document} by a new variable \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \Gamma $\end{document} which reduces to\documentclass{article}\pagestyle{empty}\begin{document}$ \dot \gamma $\end{document} for simple shear and is more appropriate for elongational and other flows. New data are obtained on shear stress transients of many kinds, using a recently developed parallel-plate rheometer. These data and others on steady and transient flows of well-characterized polydisperse polymers in shear and in elongation are used to demonstrate that the KN model predictions are valid. Comparisons with predictions for monodisperse polymers having the same as M _w polydisperse systems show that transient behavior—especially stress overshoot—is particularly sensitive to details of the molecular weight distribution. Further possible improvements in the theory are suggested, and the relationship of the KN model to other recent network models is discussed. The KN model has greater data fitting capabilities, with fewer parameters, than any other model available at present.     

Fourier-transform infrared studies of polypropylene during mechanical deformation

Quantitative Fourier-transform infrared (FTIR) measurements of frequency shifts Δν and absorbance profile asymmetry are reported for various polypropylene samples as a function of uniaxial stress σ. Generally, it was found that the frequency shift coefficient α_χ, defined by Δν = α_χσ, depended on stress rate \documentclass{article}\pagestyle{empty}\begin{document}$\dot \sigma$\end{document}, draw ratio, λ, molecular orientation f, tensile modulus E, and annealing conditions. With annealing, α_χ decreased with increasing shrinkage in the case of highly oriented isotactic PP. The α_χ values for the “helix bands” were less affected than those for the “liquid bands.” With increasing \documentclass{article}\pagestyle{empty}\begin{document}$\dot \sigma$\end{document}, generally α_χ increased to an apparent asymptotic limit. With increasing λ, f, or E, α_χ also increased from α_χ ? 0 for λ = 1 (spherulitic) to maximum values for highly oriented isotactic PP. The observed variations in α_χ can be interpreted in terms of the changes in the peak position and shape of the nonuniform molecular stress distribution. Analogous behavior with x-ray diffraction peaks obtained for polymers under stress is discussed.     

Synthesis and characterization of poly(p-phenylene pyromellitamic acid)

Poly(p-phenylene pyromellitamic acid)s were synthesized over the weight-average molecular weight range 8,000 to 22,000. The polymers were recovered as amorphous powders composed of 3–4 × 1–2 μ platelets 0.1–0.2 μ thick containing 20–30% associated solvent. Consumption of reactants and attainment of the ultimate molecular weight of the polymer were found to occur within the first few minutes of reaction. The polymers were characterized by scanning electron microscopy; ultraviolet, visible, near-infrared, and infrared spectroscopy; x-ray analysis; viscometry; and light-scattering photometry. The intrinsic viscosity–molecular weight relation for the polymer in DMF was \documentclass{article}\pagestyle{empty}\begin{document}$ [\eta ] = 25.2 \times 10^{ - 4} \bar M_w^{0.56} $\end{document}.     

Polycarboxyhydrazides with ferrocenylene groups in the main chain

Polycarboxyhydrazides essentially of the type \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm C}_{10} {\rm H}_8 {\rm Fe}\hbox{---}{\rm CONHNHCO}\rlap{--}]_n $\end{document} are synthesized by low-temperature solution condensation of 1,1′-di(chlorocarbonyl) ferrocene with hydrazine or 1, 1′-ferrocenedicarboxyhydrazide and hexamethylphosphoramide as solvent. In an analogous manner the polycondensation of 1, 1′-di(chlorocarbonyl)ferrocene with oxalyldihydrazide leads to polyhydrazides essentially possessing the structure \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm C}_{10} {\rm H}_8 {\rm Fe}\hbox{---}{\rm CONHNHCO}\hbox{---}{\rm CONHNHCO}\rlap{--}]_n $\end{document}. Both polymer types exhibit inherent viscosities (0.08–0.19 dl./g.) considerably lower than reported for analogous aliphatic or benzene-aromatic polyhydrazides. This behavior points to premature chain termination via heterobridging imide groups as a result of the welldocumented tendency of appropriately substituted ferrocene compounds to undergo intramolecular cyclization. In addition, elemental analytical and spectroscopic evidence, coupled with the failure of both polymer types to undergo cyclodehydration to the corresponding 1,3,4-oxadiazole polymers upon heat treatment, suggests some structural irregularities in the aliphatic connecting segments arising from ferrocenoylation of secondary amino groups with resultant branching. With the polyhydrazide prepared from 1, 1′-di(chlorocarbonyl)ferrocene and 1, 1′-ferrocenedicarboxyhydrazide it is shown spectroscopically that treatment with alkali results in conversation of the nonconjugated hydrazide structure of the connecting segments into the polyconjugated tautomeric enol form comprising azine groups.     

Temperature dependence of viscosity–shear rate behavior in undiluted polystyrene

The time—temperature superposition principle is well-established for linear viscoelastic properties of polymer systems. It is generally supposed that the same principle carries over into nonlinear phenomena, such as the relationship between viscosity η and shear rate \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \gamma $\end{document}. Guided by this principle and the forms of various molecular theories, one would expect that η—\documentclass{article}\pagestyle{empty}\begin{document}$ \dot \gamma $\end{document} data on the same polymer at different temperatures would superimpose when plotted as η/η0 versus \documentclass{article}\pagestyle{empty}\begin{document}$ \dot \gamma $\end{document}η0/ρT, η0 being the limiting viscosity at low shear rates, ρ the polymer density, and T the absolute temperature. Data on polystyrene melts, obtained in a plate-cone viscometer, appear systematically to violate this principle in the range 140–190°. Such anomalies are absent in concentrated solutions of polystyrene. The trends are similar to those reported by Plazek in the steady-state compliance of polystyrene melts near T_g, but they appear to persist to higher temperatures than the compliance anomaly.     

The Radical Anions and Trianions of 1,8-Diphenylnaphthalene and of Some of its Derivatives Containing a Cyclophane Substructure

The radical anions of 1,8-diphenylnaphthalene ( 1 ) and its decadeuterio-(D₁₀- 1 ) and dimethyl-( 2 ) derivatives, as well as those of [2.0.0] (1,4)benzeno(1,8)naphthaleno(1,4)benzenophane ( 3 ) and its olefinic analogue ( 4 ) have been studied by ESR and ENDOR spectroscopy, At a variance with a previous report, the spin population in \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {1}^{-\kern-4pt {.}} $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {2}^{-\kern-4pt {.}} $\end{document} is to a great extent localized in the naphthalene moiety. A similar spin distribution is found for \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {3}^{-\kern-4pt {.}} $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {4}^{-\kern-4pt {.}} $\end{document}. The ground conformations of \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {1}^{-\kern-4pt {.}} $\end{document}-\documentclass{article}\pagestyle{empty}\begin{document}$ \rm {4}^{-\kern-4pt {.}} $\end{document} are chiral of C₂ symmetry. For \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {1}^{-\kern-4pt {.}} $\end{document}, an energy barrier between these conformations and the angle of twist about the bonds linking the naphthalene moiety with the phenyl substituents were estimated as ca. 50 kJ/mol and ca. 45°, respectively. The radical trianions of 1 , D₁₀- 1 , and 2 , have also been characterized by their hyperfine data. In \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {1}^{3-\kern-4pt {.}} $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {2}^{3-\kern-4pt {.}} $\end{document}, the bulk of the spin population resides in the two benzene rings so that these radical trianions can be regarded as the radical anions of ‘open-chain cyclophanes’ with a fused naphthalene π-system bearing almost two negative charges. The main features of the spin distribution in both \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {1}^{-\kern-4pt {.}} $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ \rm {1}^{3-\kern-4pt {.}} $\end{document} are correctly predicted by an HMO model of 1 .     

Study of crosslink formation by partial conversion properties. IV. Copolymerization of styrene with poly(ethylene fumarate)

The mechanism of the crosslinking reaction in the copolymerization of poly(ethylene fumarate) and styrene has been studied by using partial conversion number-average molecular weights and viscosities. In dilute solution the reaction is mainly the formation of intramolecular crosslinks, illustrated by a reduced dependence of \documentclass{article}\pagestyle{empty}\begin{document}$\overline{\overline M}_n$\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$[\overline{\overline \eta}]$\end{document} on conversion. Increasing the monomer concentrations increases the contribution from intermolecular reactions and gives a much greater dependence of \documentclass{article}\pagestyle{empty}\begin{document}$\overline{\overline M}_n$\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$[\overline{\overline \eta}]$\end{document} on conversion.     

Stable [C2H7O2]+ isomers: Experimental and theoretical evidence for the existence of protonated peroxides and proton-bound dimers in the gas phase

Evidence is presented for the gas phase generation of at least eight stable isomeric [C₂H₇O₂]⁺ ions. These include energy-rich protonated peroxides (ions \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm CH}_2 {\rm O}\mathop {\rm O}\limits^{\rm + } {\rm H}_{\rm 2} $\end{document} (e), \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm CH}_{\rm 2} \mathop {\rm O}\limits^{\rm + } {\rm (H)OH} $\end{document} (f) and \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm O}\mathop {\rm O}\limits^{\rm + } {\rm (H)CH}_{\rm 3} {\rm (g)),} $\end{document} (g)), proton-bound dimers (ions \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm CH = O} \cdot \cdot \cdot \mathop {\rm H}\limits^{\rm 3} \cdot \cdot \cdot {\rm OH}_{\rm 2} $\end{document} (h) and \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH2 = O} \cdot \cdot \cdot \mathop {\rm H}\limits^{\rm + } \cdot \cdot \cdot {\rm HOCH}_{\rm 3} $\end{document} (i)) and hydroxy-protonated species (ions \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 2} {\rm (OH)CH}_{\rm 2} \mathop {\rm O}\limits^{\rm + } {\rm H}_{\rm 2} (a), $\end{document} \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm CH(OH)}\mathop {\rm O}\limits^{\rm + } {\rm H}_{\rm 2} $\end{document} (b) and \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} {\rm OCH}_{\rm 2} \mathop {\rm O}\limits^{\rm + } {\rm H}_{\rm 2} $\end{document} (c)). The important points of the present study are (i) that these ions are prevented by high barriers from facile interconversion and (ii) that both electron-impact- and proton-induced gas phase decompositions seem to proceed via multistep reactions, some of which eventually result in the formation of proton-bound dimers.     

Solution properties of ethylene-vinyl acetate copolymers

High-pressure ethylene–vinyl acetate copolymers of four different chemical compositions(9%, 15%, 45%, and 70% VA) were characterized to determine molecular weight and distribution. The four samples were fractionated by solvent–nonsolvent precipitation methods. Light-scattering, osmometry, and viscosity measurements were made on these fractionated copolymers to determine weight-average molecular weight \documentclass{article}\pagestyle{empty}\begin{document}$ \overline {M_w } $\end{document}, number-average molecular weight \documentclass{article}\pagestyle{empty}\begin{document}$ \overline {M_n } $\end{document}, molecular size in solution, and interaction constants. Dilute solution viscosity was measured on the fractions to determine intrinsic viscosity and Huggins' constant k′. Viscosity–molecular weight equations were established for the four copolymer compositions. The log intrinsic viscosity versus log molecular weight diagrams were analyzed and the average length of branches calculated. The composition of the polymer fractions, determined by C and H combustion analysis, was found not to vary significantly with molecular weight. The uniformly random character of the E/VA copolymers was thereby confirmed. The density of the fractions was determined by density-gradient column method. Chain sequence distribution of monomer units for the four copolymers was calculated by using IBM 704 computations involving the actual monomer reactivity ratios. Long sequences of either ethylene or vinyl acetate are improbable, except at the extremes of copolymer composition.     

Rearrangement of the Radical Anions of 1,6-Bridged[10]Annulenes to Derivatives of 5H-Benzocycloheptene and Benzotropylium

The rearrangement products obtained upon reduction of 1,6-methano[10]-annulene ( 1 ) and its 11-halogen derivatives have been studied by ESR. and, in part, by ENDOR. spectroscopy. These derivatives comprise 11,11-difluoro- ( 2 ), 11-fluoro- ( 3 ), 11,11-dichloro- ( 4 ) and 11-bromo-1,6-methano[10]annulene ( 5 ), as well as the 2,5,7,10-tetradeuteriated compounds 2 -D₄ and 3 -D₄. The studies of the secondary products in question have been initiated by the finding that the radical anion of 11,11-dimethyltricyclo[4.4.1.0^1,6]undeca-2,4,7,9-tetraene ( 12 ), i.e., the prevailing valence isomer of 11,11-dimethyl-1,6-methano[10]annulene, undergoes above 163 K a rearrangement to the radical anion of 5,5-dimethylbenzocycloheptene ( 14 ). A rearrangement of this kind also occurs for the radical anion of the parent compound 1 , albeit only above 323 K. The lower reactivity of 1 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} relative to 12 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} is rationalized by the assumption that the first and rate determining step in the case of 1 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} is the valence isomerization to the radical anion of tricyclo[4.4.1.0^1,6]undeca-2,4,7,9-tetraene ( 1a ). In the reducing medium used in such reactions (potassium in 1,2-dimethoxyethane), the final paramagnetic product of 1 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} is not 5H-benzocycloheptene ( 15 ), but the benzotropylium radical dianion ( ). This product ( ) is also obtained from the radical anions of the halogen-substituted 1,6-methano[10]annulenes, 2 to 5 , in the same medium. The temperatures required for the conversion of 2 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} and 3 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} into lie above 293 and 243 K, respectively, whereas the short-lived species 4 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} and 5 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} undergo such a rearrangement already at 163 K. The stability of the four halogen-substituted radical anions thus decreases in the sequence 2 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} > 3 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} > 4 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} ≈ 5 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document}. Replacement of 2 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} and 3 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} by 2 -D₄\documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} and 3 -D₄\documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document}, respectively, leads to 1,4,5,8-tetradeuteriobenzotropylium radical dianion ( ). Experimental evidence and theoretical arguments indicate that the rearrangements in question are initiated by a loss of one ( 3 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} and 5 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document}) or two ( 2 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document} and 4 \documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document}) halogen atoms. Such a reaction step must involve the intermediacy of the radical 19 · (see below) which rapidly isomerizes to the benzotropylium radical 16 :. Support for the transient existence of 19 . is provided by the thermolysis of 1,6-methano [10]annulene-11-t-butylperoxyester (6) which yields 16 . in a temperature dependent equilibrium with a mixture of its dimers ( 16 ₂). In the hitherto unreported ESR. spectra of 2\documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document}. and 3\documentclass{article}\pagestyle{empty}\begin{document}$ 1^{\ominus \atop \dot{}} $\end{document}, the coupling constants of the ring protons differ considerably from the analogous values for the radical anions of other 1,6-bridged [10]annulenes. These differences strongly suggest that the fluoro-substitution substantially affects the character of the singly occupied orbital.     

The Radical Anions of 1,2-diphenylcyclohexene and Structurally Related Compounds. Conformational ESR and ENDOR studies

ESR, ENDOR, and TRIPLE resonance studies have been performed on the radical anions of 1,2-diphenylcyclohex-1-ene ( 4 ), 1,2-di(perdeuteriophenyl)cyclohex-1-ene ((D₁₀) 4 ) the trans-configurated 3,4-diphenyl-8-oxabicyclo[4.3.0]non-3-ene ( 5 ) and its 2,2,5,5-tetradeuterio derivative (D₄) 5 , and 2,3-diphenyl-8,9,10-trinorborn-2-ene ( 6 ). The spectra of \documentclass{article}\pagestyle{empty}\begin{document}$ 4^{- \atop \dot{}} $\end{document} exhibit strong temperature dependence along with a specific broadening of ESR hyperfine lines and proton ENDOR signals. The coupling constant, which bears the main responsibility for these features, is that of the β-protons in the quasi-equatorial positions of the cyclohexene ring, and the experimental findings are readily rationlized in terms of relatively modest conformational changes without invoking the inversion of the half-chair form. The hyperfine data for the β-protons in \documentclass{article}\pagestyle{empty}\begin{document}$ 5^{- \atop \dot{}} $\end{document} closely resemble the corresponding low-temperature values for \documentclass{article}\pagestyle{empty}\begin{document}$ 4^{- \atop \dot{}} $\end{document}, However, the ‘unusual’ features observed for \documentclass{article}\pagestyle{empty}\begin{document}$ 4^{- \atop \dot{}} $\end{document} are absent in the ESR and ENDOR spectra of \documentclass{article}\pagestyle{empty}\begin{document}$ 5^{- \atop \dot{}} $\end{document}, because the half-chair conformation of the cyclohexene ring in \documentclass{article}\pagestyle{empty}\begin{document}$ 5^{- \atop \dot{}} $\end{document} is deprived of its flexibility. Although the boat form of this ring in \documentclass{article}\pagestyle{empty}\begin{document}$ 6^{- \atop \dot{}} $\end{document} is also rigid, the spectra of \documentclass{article}\pagestyle{empty}\begin{document}$ 6^{- \atop \dot{}} $\end{document} are temperature-dependent, due to an interconversion between two propeller-like conformations of the phenyl groups. The pertinent barrier is 30 ± 5 kJ ·mol^?1. An analogous interconversion presumably takes place in \documentclass{article}\pagestyle{empty}\begin{document}$ 4^{- \atop \dot{}} $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ 5^{- \atop \dot{}} $\end{document} as well, but, unlike \documentclass{article}\pagestyle{empty}\begin{document}$ 6^{- \atop \dot{}} $\end{document}, it is not amenable to experimental study.     

Synthesis of polyperfluoroalkylenetriazines

Four new s-triazine polymers were prepared by the mercury-induced coupling of bromodifluoromethyl-substituted ditriazinyl-perfluoroalkane derivatives. Each polymer was composed of CF₃-substituted s-triazin rings alternately joined with ? CF₂CF₂? segments and \documentclass{article}\pagestyle{empty}\begin{document}$\hbox{---}\hskip-5pt({\rm CF}_2 )_8 \hbox{---}$\end{document}, a mixture of ? (CF₃CFO(CF₂)₅OCF(CF₃)? and ? (CF₃)CFOCF₂CF(CF₃)OCF₂)₄? , ? CF₂OCF₂? , or ? CF₂SCF₂? , segments. All polymers were elastomeric and displayed high temperature stability on thermogravimetric analysis. The polymers containing either ? CF₂OCF₂? or ? CF₂SCF₂? segments showed high temperature limits slightly lower than the other two systems.     

Structures and formation of \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 4}} {\rm H}_{{\rm 8}} } \right]_{}^{_.^ + } $\end{document} ions

Several \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 4}} {\rm H}_{{\rm\ 8}} } \right]_{}^{_.^ + } $\end{document} ion isomers yield characteristic and distinguishable collisional activation spectra: \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm 1-butene} } \right]_{}^{_.^ + } $\end{document} and/or \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm 2-butene} } \right]_{}^{_.^ + } $\end{document} (a-b), \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm isobutene} } \right]_{}^{_.^ + } $\end{document} (c) and [cyclobutane]⁺ (e), while the collisional activation spectrum of \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm methylcyclopropane} } \right]_{}^{_.^ + } $\end{document} (d) could also arise from a combination of a-b and c. Although ready isomerization may occur for \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm C}_{{\rm 4}} {\rm H}_{{\rm 8}} } \right]_{}^{_.^ + } $\end{document} ions of higher internal energy, such as d or e → a, b, and/or c, the isomeric product ions identified from many precursors are consistent with previously postulated rearrangement mechanisms. 1,4-Eliminations of HX occur in 1-alkanols and, in part, 1-buthanethiol and 1-bromobutane. The collisional activation data are consistent with a substantial proportion of 1,3-elimination in 1- and 2-chlorobutane, although 1,2-elimination may also occur in the latter, and the formation of the methylcycloprpane ion from n-butyl vinyl ether and from n-butyl formate. Surprisingly, cyclohexane yields the \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm linear butene} } \right]_{}^{_.^ + } $\end{document} ions a-b, not \documentclass{article}\pagestyle{empty}\begin{document}$ \left[{{\rm cyclobutane} } \right]_{}^{_.^ + } $\end{document}, e.