Interaction Between Two Similar Plane Parallel Double Layers for (NH4)2Fe(SO4)2 or (NH4)2Cu(SO4)2 Type Complex Salt Electrolytes at Positive Surface Potential

Interaction energies between two similar plane parallel double layers for (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ type complex salt electrolytes at positive surface potential were expanded in a power series and accurate numeral results were given for 0.1 ≤ y _e  < y ₀ ≤ 20. The general expressions were given for the interaction energies of A _ν +B _ν′ +C_ν? type complex salt electrolytes at y > 0. The interaction energies for simple salts NaCl, CaCl₂, Na₂SO₄, FeCl₃, Na₃PO₄, Mg₃(PO₄)₂, Al₂(SO₄)₃, and complex salts (NH₄)₂Fe(SO₄)₂ or (NH₄)₂Cu(SO₄)₂ at y ₀ = 1 were compared. There was hardly difference between these simple salts and this complex salt for the interaction energies. The interaction energy for complex salt (NH₄)₂Fe(SO₄)₂ was close to that for simple salt Na₃PO₄.

Supplemental files are available for this article. Go to the publisher's online edition of the Journal of Dispersion Science and Technology to view the free supplemental file.     

Synthesis,characterization and luminescence of the tetranuclear gold cluster: [Au4{7,8-(PPh2)2-7,8-C2B9H10}2(PPh3)2]

A tetranuclear gold cluster has been synthesized by the reaction of [Au(PPh₃)NO₃] with the closo carborane diphosphine 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ in THF, and characterized by elemental analysis, FT-IR, ¹H and ¹³C?NMR spectroscopy and X-ray structure determination. The cluster crystallizes in the triclinic Pī, a?=?15.118(8)?Å, b?=?16.057(9)?Å, c?=?24.284(13)?Å, α?=?80.822(9)°, β?=?79.624(8)°, γ?=?81.938(8)°, Z?=?2, R ₁?=?0.0626, wR ₂?=?0.1894. A single crystal structure determination showed that four gold atoms form a tetrahedral framework. Among these four gold atoms, two were chelated by two nido carborane diphosphine [7,8-(PPh₂)₂-7,8-C₂B₉H₁₀]^? anions coming from the degradation of the initial closo ligand 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀, while the other two were ligated to two PPh₃ groups. The luminescence of this cluster was also investigated in dichloromethane solution at room temperature.     

Etude de la deshydratation de Ca(H2PO4)2·H2O et de sa reaction avec CaSO4 par ATD-ATG couplees

The dehydration of Ca(H₂PO₄)₂·H₂O was examined with simultaneous DTA and TG. This dehydration permitted clearly the apparation of the following phases: Ca(H₂PO₄)₂·0.5H₂O, Ca(H₂PO₄)₂, Ca₃(HP₂O₇)₂, Ca₂HP₃O₁₀ et Ca(PO₃)₂. The reaction of Ca(H₂PO₄)₂·H₂O and CaSO₄ was also examined with the same technics. It was found that the decomposition of CaSO₄ takes place for relatively low temperature (between 600°C and 800°C).     

Tribochemistry and kinetics of Al2(SO4)3·xH2O decomposition

The thermal decomposition of tribochemically activated Al₂(SO₄)₃·xH₂O was studied by TG, DTA and EMF methods. For some of the intermediate solids, X-ray diffraction and IR-spectroscopy were applied to learn more about the reaction mechanism. Thermal and EMF studies confirmed that, even after mechanical activation of Al₂(SO₄)₃·xH₂O, Al₂O(SO₄)₂ is formed as an intermediate. Isothermal kinetic experiments demonstrated that the thermochemical sulphurization of inactivated Al₂(SO₄)₃·xH₂O has an activation energy of 102.2 kJ·mol^?1 in the temperature range 850–890 K. The activation energy for activated Al₂(SO₄)₃·xH₂O in the range 850–890 K is 55.0 kJ·mol^?1. The time of thermal decomposition is almost halved when Al₂(SO₄)₃·xH₂O is activated mechanically. The results permit conclusions concerning the efficiency of the tribochemical activation of Al₂(SO₄)₃·xH₂O and the chemical and kinetic mechanisms of the desulphurization process.     

Convenient and efficient stereoselective synthesis of (2Z)-2-(chloromethyl)alk-2-enoates using iron(III) or indium(III) chloride

The stereoselective synthesis of (2Z)-2-(chloromethyl)alk-2-enoates has been achieved efficiently and in high yields and in short reaction times from Baylis-Hillman adducts, 3-hydroxy-2-methylene-alkanoates, by treatment with FeCl₃ or InCl₃ at room temperature.     

Regioselective Ring Opening of Styrene Oxide Catalyzed by MoO2(acac)2

The ring-opening reaction of styrene oxide with various nitrogen, oxygen, and carbon nucleophiles catalyzed by MoO₂(acac)₂ was described. The corresponding ring-opening compounds with nearly 100% regioselectivities were obtained under mild conditions in moderate to good yields. MoO₂(acac)₂ is a highly efficient catalyst for the ring opening of styrene oxide. The reaction serves as a simple and efficient method for the synthesis of 1,2-bifunctional compounds.     

Facile one-pot synthesis of 2-arylbenzothiazoles catalyzed by H3PO4/TiO2-ZrO2 (1/1) under solvent-free conditions

A highly efficient and simple protocol for the preparation of 2-arylbenzothiazoles through condensation of 2-aminothiophenol and different aldehydes in the presence of H₃PO₄/TiO₂-ZrO₂(1/1)-cetyl pyridinium bromide (CPB) is described. The reaction proceeded under mild and solvent-free conditions to afford 2-arylbenzothiazole derivatives. In this method, the title compounds were obtained in good to excellent yields and short reaction times. The structures of synthesized products were identified by infrared, ¹H NMR, ¹³C NMR, and mass spectroscopy.     

Preparation of ethyl levulinate from wheat stalk over Zr(SO4)2/SiO2

A series of Zr(SO₄)₂/SiO₂ solid acid catalysts with different Zr(SO₄)₂ loadings were prepared by water-soluble-impregnation method at room temperature. Then, the prepared catalysts were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy and energy-dispersive X-ray spectrum, X-ray diffraction, adsorption/desorption of N₂, and temperature-programmed desorption of NH₃. The results showed that the active component Zr(SO₄)₂ was successfully adhered to the mesoporous SiO₂, and the acid amount of Zr(SO₄)₂/SiO₂ increased with the increasing of the Zr(SO₄)₂ loadings. Finally, the wheat stalk was used as raw material and depolymerized over Zr(SO₄)₂/SiO₂ to produce ethyl levulinate (EL). The reaction mixture was separated and purified by filtration and vacuum distillation. The kinetic characteristics and the reaction pathway were also studied. A comparative study showed that 20 wt.% Zr(SO₄)₂/SiO₂ exhibited higher catalytic activity. When reaction temperature, time, catalyst dosage and Zr(SO₄)₂ loadings were 190 °C, 50 min, 20 wt.% and 30 wt.%, the EL yield reached a maximum of 17.14%. The relative content of EL exceeded 90% after three steps of distillation.     

Synthesis and thermal investigation of Na2Cd(SO4)2·2H2O

The synthesis and thermal decomposition of Na₂(SO₄)₂·2H₂O in both air and nitrogen are described. The synthesis was performed by two different procedures, but in both cases the same product was obtained, corresponding to the general formula given above. The crystals obtained were investigated by methods of X-ray powder diffraction, and chemical and thermal analysis. The differences in thermal decomposition in air and nitrogen are discussed.     

Cu(OAc)2-Catalyzed N-Arylation of Sulfonamides with Arylboronic Acids or Trimethoxy(phenyl)silane

Cu(OAc)₂-catalyzed C-N bond-formation reaction of sulfonamides with organoboronic acids or trimethoxy(phenyl)silane was achieved in the presence of 20 mol% of Cu(OAc)₂, providing N-arylation products with yields ranging from moderate to good.     

Synthesis and characterization of a new cyclic phosph(V)azane ligand [(C6H5N)P(O)H]2 and its zinc(II) complex

The new cyclic phosph(V)azane ligand [(C₆H₅N)P(O)H]₂ (2) is obtained from the reaction between PCl₃ and PhNH₂ in toluene followed by controlled hydrolysis of the product in an H₂O–CHCl₃ solution. Compound 2 is the first example of P(V) dimer [(µ-NC₆H₅)P(H)=O]₂, a P₂N₂ ring with two P(O)H moieties. The reaction of 2 with ZnCl₂ in a molar ratio of 1?:?1 in tetrahydrofuran yields the cyclophosph(V)azane complex Cl₂Zn[(C₆H₅N)P(O)H]₂ (3) in which Zn–O bonds form directly between a cyclic phosph(V)azane ligand and Zn(II). The products have been characterized by infrared, multinuclear (¹H, ³¹P, ¹³C) NMR, mass spectrometry, and elemental analysis.     

Crystal structure of Li2Cu3(SeO3)2(SeO4)2

Summary Single crystal X-ray data of the hydrothermally grown new phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ were measured with a four-circle diffractometer up to sin /=0.81 Å^–1 [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, = 94.21(1)°]. The structure was determined by direct and Fourier methods and refined toR=0.034,R _w =0.027 for 2 086 independent reflections.Cu(1)^[4+1]O₅ forms a tetragonal pyramid, Cu(2)^{[4 + 2]}O₆ is a strongly elongated octahedron. The Li atom is surrounded by four O atoms forming a distorted tetrahedron. Se(IV)O₃ and Se(VI)O₄ groups are in accordance to literature, mean Se-O bond lengths are 1.714 and 1.644 Å.

---

Die Kristallstruktur von Li₂Cu₃(SeO₃)₂(SeO₄)₂

Zusammenfassung Einkristall-Röntgendaten der hydrothermal gezüchteten neuen Phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ wurden mit einem Vierkreisdiffraktometer im Bereich bis zu sin /=0.81 Å^–1 gemessen [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, =94.21(1)°]. Die Kristallstruktur wurde mittels direkter und Fourier-Methoden bestimmt und für 2 086 unabhängige Reflexe zuR=0.034,R _w =0.027 verfeinert.Cu(1)^[4+1]O₅ bildet eine tetragonale Pyramide, Cu(2)^[4+2]O₆ ist ein stark verlängertes Oktaeder. Das Li-Atom ist von vier O-Atomen in Gestalt eines verzerrten Tetraeders umgeben. Die Se(IV)O₃-und Se(VI)O₄-Gruppen entsprechen der Literatur, die mittleren Se-O-Abstände betragen 1.714 und 1.644 Å.

     

The thermal decomposition of (NH4)[VO(O2)2(NH3)]

The compound, (NH₄)[VO(O₂)₂(NH₃)], thermally decomposes to ammonium metavanadate, which then decomposes to vanadium pentoxide. Using a heating rate of 5 deg·min^–1, the first decomposition step occurs between 74° and 102°C. The transformation degree dependence of the activation energy (-E) is shown to follow a decreasing convex form, indicating that the first decomposition step is a complex reaction with a change in the limiting stage of the reaction. Infrared spectra indicated that the decomposition proceeds via the gradual reduction of the ratio of the (NH₄)₂O to V₂O₅ units from the original 11 ratio in ammonium metavanadate, which may be written as (NH₄)₂O·V₂O₅, to V₂O₅.The assistance of Professor A. M. Heyns (University of Pretoria) and Professor K. L. Range (University of Regensburg) is gratefully acknowledged as well as the financial assistance of the University of Pretoria and the FRD.     

Topotaxial formation of titanium-rich barium titanates during solid state reactions on (110) TiO2 (rutile) and (001) BaTiO3 single crystals

The orientation relationships of Ti-rich barium titanate phases formed by solid state reactions at high temperatures were studied using (110) TiO₂ (rutile) and (001) BaTiO₃ single-crystal substrates. Well-oriented Ba₆Ti₁₇O₄₀ islands were observed after a vapor–solid reaction of a BaO quantity equivalent to a nominal BaO film thickness of 1 nm with the TiO₂ substrate, whereas a thin film consisting of well-oriented BaTiO₃ and Ba₆Ti₁₇O₄₀ grains was formed after vapor–solid reaction of a BaO quantity equivalent to a nominal BaO film thickness of 50 nm with the rutile substrate. A topotaxial orientation relationship between Ba₆Ti₁₇O₄₀ and TiO₂ was found. Topotaxy is facilitated by a certain similarity in the oxygen sublattices of TiO₂ and Ba₆Ti₁₇O₄₀. The mechanism of the reaction occurring between BaO vapor and the TiO₂ surface at high temperature is discussed. On the other hand, several well-oriented Ba₄Ti₁₃O₃₀, Ba₆Ti₁₇O₄₀ and Ba₂Ti₅O₁₂ phases were observed to be embedded in the mainly forming Ba₂TiSi₂O₈ phase after a solid–solid reaction of amorphous SiO₂ thin films with (001) BaTiO₃ substrates at temperatures above 1000 °C. They were formed by a topotaxial reaction involving the transformation of (111) planes of BaTiO₃ into (001) planes of the Ti-rich phases by removal of BaO and insertion of TiO₂. Cross-sections of the interfaces between the substrates and the various reaction products are studied by (high-resolution) transmission electron microscopy.     

Supramolecular architecture built of Co(II) and a tripodal ligand containing 1-D water tapes with (H2O)16 cluster units

The reaction of Co(NO₃)₂?·?6H₂O with a tripodal ligand leads to a new complex {[Co(L)]?·?2NO₃?·?8H₂O} (1) confirmed by single-crystal X-ray diffraction, infrared spectroscopy, and elemental analysis. The particular interest of 1 is in the formation of a 1-D water tape consisting of (H₂O)₁₆ cluster units, the neighboring water tapes are connected by free nitrate anions via hydrogen bonds into a 2-D guest layer. These guest layers are alternately packed face-to-face with the 2-D host layers along the a-axis to form a 3-D supramolecular architecture. There exist C–H?···?N and C–H?···?O weak hydrogen bonds between the guest layer and host layer. These weak hydrogen bonds and water–nitrate, water–water hydrogen bonds are important for the stability of the overall structure.     

Cr2(WO4)3和Cr2(MoO4)3的负热膨胀特性研究

用液相反应-前驱物烧结法制备了Cr₂(WO₄)₃和Cr₂(MoO₄)₃粉体。298～1 073 K的原位粉末X射线衍射数据表明Cr₂(WO₄)₃和Cr₂(MoO₄)₃的晶胞体积随温度的升高而增大, 本征线热膨胀系数分别为(1.274±0.003)×10^-6 K^-1和(1.612±0.003)×10^-6 K^-1。用热膨胀仪研究了Cr₂(WO₄)₃和Cr₂(MoO₄)₃在静态空气中298～1 073 K范围内热膨胀行为，即开始表现为正热膨胀，随后在相转变点达到最大值，最后表现为负热膨胀，其负热膨胀系数分别为(-7.033±0.014)×10^-6 K^-1和(-9.282±0.019)×10^-6 K^-1。     

DSC study of the phase transitions in [Ni(D2O)6](ClO4)2 and [Ni(H2O)6](ClO4)2

DSC measurements were carried out for [Ni(H₂O)₆](ClO₄)₂ (sampleH) and [Ni(D₂O)₆](ClO₄)₂ (sampleD) in the temperature range 300–380 K. For both compounds two anomalies on the DSC curves were detected. The results for sampleH are compared to those previously obtained using adiabatic calorimetry method. For both compounds studied in this work the high-temperature transition appears at the same temperature while the low-temperature one is shifted towards higher temperatures in sampleD. Disorder connected with H₂O or D₂O groups is suggested in the intermediate phase between the low- and high-temperature transitions.     

The effect of experimental methods and measurement conditions on values of the kinetic parameters of [Co(NH3)6]2(C2O4)3·4H2O

Using the thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O as a basis, the paper presents results which show how computed values of kinetic parameters are influenced by experimental conditions (ambient atmosphere, sample mass, linear heating rate) when using the non-isothermal methods and the Coats-Redfern (CR) modified equation. It also illustrates the influence of the experimental methods i.e. non-isothermal and isothermal (conventional) methods and also a quasiisothermal-isobaric one which can be recognised as equivalent to Constant Rate Thermal Analysis (CRTA). The results obtained have confirmed the significant influence of the experimental parameters as well as that of the experimental method used on the estimated values of kinetic parameters. The correlation between activation energy (E) and sample mass (m) or heating rate (β) is generally of a linear nature:E=a+bx     

PbCu3(OH)(NO3)(SeO3)3·1/2H2O und Pb2Cu3O2(NO3)2(SeO3)2: Synthese und Kristallstrukturuntersuchung

Crystals of PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O [a=7.761(3)Å,b=9.478(4)Å,c=9.514(4)Å, =66.94(2)°, =69.83(2)°, =81.83(2)°, space group P ,Z=2] and Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ [a=5.884(2)Å,b=12.186(3)Å,c=19.371(4)Å, space group Cmc2₁,Z=4] were synthesized under hydrothermal conditions. Their crystal structures were refined with three-dimensional X-ray data toR _w=0.033 resp. 0.055. In PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O the Cu atoms are [4+1] and [4+2] coordinated and via SeO₃ groups a three-dimensional atomic arrangement is built up. In Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ there are sheets, which are connected only via Pb-O bonds ranging from 2.98 Å to 3.16 Å.

     

Die Kristallstruktur von Dikalium-trikobalt(II)-dihydroxid-trisulfat-dihydrat,K2Co3(OH)2(SO4)3·2H2O

Crystals of K₂Co₃(OH)₂(SO₄)₃·2H₂O were synthesized under hydrothermal conditions. The crystal structure [a=17.945 (4) Å,b=7.557 (2) Å,c=9.760 (3) Å, space group Cmc2₁,Z=4] was determined by direct methods and refined with single crystal X-ray data. The H atoms were located byFourier syntheses. Their structural parameters were refined, too. The finalR-values areR=0.025 andR _w =0.028 (w=1/) for 612 reflections withF ₀>3 (F ₀). Both Co(II) atoms are octahedral six coordinated and form zigzag chains running parallel [001]. These chains are connected via sulfate groups to built up sheets parallel (100). The KO₉ polyhedron and one of the four hydrogen bonds link these sheets.