One-pot, multicomponent route to pyrazoloquinolizinones

[reaction: see text] An efficient synthesis of 5a-hydroxy-4,5,5a,6,7,8-hexahydropyrazolo[4,3-c]quinolizin-9-ones based on the three-component condensation of 5-aminopyrazoles, aromatic aldehydes, and cyclic 1,3-diketones is described. The multicomponent reaction is performed under strongly basic conditions applying controlled microwave heating in a sealed vessel and involves an unusual base-mediated ring-opening/recyclization of the cyclic 1,3-diketone moiety.     

Iodine catalyzed synthesis of the chromene derivatives in one-pot

Iodine catalyzed one-pot reactions of salicylaldehyde and dimolecular 1 H-indene-1,3(2H)-dione,barbituric acids,4-hydroxycoumarin, or 4-hydroxy-6-methylpyran-2-one were performed and provided a rapid,convenient and general approach to synthesize the chromene derivatives.2-(11-Oxo-10,11-dihydroindeno[l,2-b]chromen-10-yl)-1H-indene-1,3(2H)-diones P1-P4 and 10-(4-hydroxy-6-methyl-2-oxo-2H-pyran-3-yl)-3-methylpyrano[4,3-6]chromen-1(10H)-ones P8-P9 were unprecedentedly prepared and structurally identified by NMR and Mass.The confirmation of structure by single crystal X-ray crystallography is reported for P3.     

Fused pyrimidine systems: XIII. Synthesis and some transformations of 1,3-thiazolo(thiazino)-fused pyrido[3,4-d]pyrimidines

2-[Allyl(propargyl)sulfanyl]pyrido[3,4-d]pyrimidin-4-ones at heating in polyphosphoric acid undergo an intramolecular cyclization with the formation of pyrido[4,3-e]thiazolo-[3,2-a]pyrimidin-5-ones of angular structure. Under similar conditions the cyclization of 2-(cinnamylsulfanyl)pyrido[3,4-d]-pyrimidin-4-one results in a linear pyrido[3′,4′:4,5]pyrimido-[2,1-b][1,3]thiazin-6-one. The iodocyclization of the same substrates affords the corresponding 9-(iodomethyl)(iodomethylidene)pyrido[4,3-e][1,3]thiazolo-[3,2-a]pyrimidin-5-ones and 3-iodopyrido[3′,4′:4,5]pyrimido[2,1-b][1,3]thiazin-6-one of angular structure. 9-(Iodomethyl)-8,9-dihydro-5H-pyrido[4,3-e][1,3]thiazolo[3,2-a]pyrimidin-5-one treated with sodium azide gave 9-(azidomethyl) derivative whose cyclization with substituted alkynes in the presence of copper compounds provided pyrido [4,3-e][1,3]thiazolo[3,2-a]pyrimidinylmethyltriazoles.     

Synthesis of Precursors of Heterocyclic cis-β-Amino Alcohols by Intramolecular Amidoalkylation of 4-Hydroxyoxazolidin-2-ones

The reaction of intramolecular amidoalkylation of 4-hydroxyoxazolidin-2-ones leads to formation of novel and rare heterocyclic systems: substituted 1,5,6,10b-tetrahydro[1,3]oxazolo[4,3-a]isoquinolin-3-ones, 3a,4,5,10b-tetrahydro[1,3]dioxolo[4',5':6,7]naphtho[1,2-d][1,3]oxazol-2(1H)-ones, and 5,6,10,10a-tetrahydro-1H-di[1,3]oxazolo[3,4-d:4,3-g][1,4]diazepine-3,8-diones. Mild reaction conditions and the simplicity of isolation of the compounds formed make it possible to obtain the indicated heterocycles in high yields.     

Facile synthesis of [1,2,4]triazino[4,3-b][1,2,4,5]tetrazepin derivatives by a one-pot reactions using 4-amino-3-hydrazinyl-6-methyl-1,2,4-triazin-5 (4H)-one

<正>4-Amino-3-mercapto-6-methyl-l,2,4-triazin-5(4H)-one 1 converted to 4-amino-6-methy-3-(methylthio)-1,2,4-triazin-5(4H)-one by methylation with methyl iodide.Controlled hydrazination of the resulting compound afforded 4-amino-3-hydrazinyl-6- methyl-l,2,4-triazin-5(4H)-one 2 as a building block,to the synthesis of some novel derivatives of[1,2,4]triazino- [4,3,b][1,2,4,5]tetrazepine 3-6,by the reaction with 3-chloropentane-2,4-dione,chloro acetonitrile,1,3-dichloroacetone,and methyl bromoacetate.This general synthetic procedure can be extended to the preparation of wide variety of tetrazepines using 1,2- bielectrophiles derivatives.     

Tuning of chemo- and regioselectivities in multicomponent condensations of 5-aminopyrazoles, dimedone, and aldehydes

Regio- and chemoselective multicomponent protocols for the synthesis of 1,4,6,7,8,9-hexahydro-1H-pyrazolo[3,4-b]quinolin-5-ones, 5,6,7,9-tetrahydropyrazolo[5,1-b]quinazolin-8-ones, and 5a-hydroxy-4,5,5a,6,7,8-hexahydropyrazolo[4,3-c]quinolizin-9-ones starting from 5-amino-3-phenylpyrazole, cyclic 1,3-dicarbonyl compounds and aromatic aldehydes are described. Whereas the three-component coupling in ethanol under reflux conditions provides mixtures of pyrazoloquinolinones and pyrazoloquinazolinones, the condensation can be successfully tuned toward the formation pyrazoloquinolinones (Hantzsch-type dihydropyridines) by performing the reaction at 150 degrees C in the presence of triethylamine base applying sealed vessel microwave or conventional heating. On the other hand, using sonication at room temperature under neutral conditions favors the formation of the isomeric pyrazoloquinazolinones (Biginelli-type dihydropyrimidines). These products are also obtained when the three-component condensation is executed in the presence of trimethylsilylchloride as reaction mediator at high temperatures. A third reaction pathway leading to pyrazoloquinolizinones in a ring-opening/recyclization sequence can be accessed by switching from triethylamine to a more nucleophilic base such as sodium ethoxide or potassium tert-butoxide. The reaction mechanism and intermediates leading to these three distinct tricyclic condensation products are discussed.     

Synthesis of new condensed derivatives of pyrano[4,3-<Emphasis Type="Italic">b</Emphasis>]thieno[3,2-<Emphasis Type="Italic">e</Emphasis>]pyridine and pyrido[3',2':4,5]thieno[3,2-<Emphasis Type="Italic">d</Emphasis>]pyrimidine

The reactions of 2-methyl (propyl) substituted 8,8-dimethyl-7,10-dihydro-4H,8H-pyrano[3",4":5',6']pyrido[3',2':4,5]thieno[3,2-d][1,3]oxazines with primary amines give 2-methyl (propyl) substituted 8,8-di- methyl-7,10-dihydro-8H-pyrano[3",4":5',6']pyrido[3',2':4,5]thieno[3,2-d][1,3]pyrimidin-4(3H)-ones or 3-acetyl-N-alkyl- and N-alkyl-3-butyrylamino-7,7-dimethyl-7,8-dihydro-5H-pyrano[4,3-b]thieno[3,2-e]- pyridine-2-carboxamides depending on steric hindrance in the amines.     

One-pot synthesis of novel pyrido[2,3-d]pyrimidines using HAp-encapsulated-γ-Fe2O3 supported sulfonic acid nanocatalyst under solvent-free conditions

Novel pyrido[2,3-d]pyrimidine derivatives were synthesized through a one-pot three-component approach using HAp-encapsulated-γ-Fe2O3[γ-Fe2O3@HAp-SO3H]catalyzed condensation of 6-arnino-2-（methylthio or ethylthio）pyrimidin-4（3H）-one,Meldrum＇s acid and aryl aldehydes at 60 ℃ and under solvent-free conditions.In this protocol the use of nanocatalyst provided a green,useful and rapid method to generate the products in short reaction times and excellent yields（88%-94%）.     

Hapten synthesis for (+)-6-(2-chlorophenyl)-3-cyclopropanecarbonyl-8,11-dimethyl-2,3,4,5-tet rahydro-8H-pyrido[4',3':4,5]thieno[3,2-f] triazolo[4,3-a][1,4]diazepine (E6123).

(+)-6-(2-Chlorophenyl)-3-cyclopropanecarbonyl-8,11-dimethyl-2,3,4, 5-tetrahydro-8H-pyrido[4',3':4,5]thieno[3,2-f]triazolo[4,3-a] [1,4]diazepine (E6123) is a very potent platelet-activating factor (PAF) receptor antagonist and shows potent anti-PAF activities at the microgram level in a variety of animal models. In order to examine the pharmacokinetics of E6123 at low doses, establishment of a radioimmunoassay is required. On the basis of the metabolic pattern of E6123, we synthesized 6-[2-chloro-4-(3-carboxypropyl) phenyl]-3-cyclopropanecarbonyl-8,11-dimethyl-2,3,4,5-tetrahydro-8H -pyrido[4',3':4,5]thieno[3,2-f][1,2,4]triazolo[4,3-a][1,4]diazepine 22 as a potential hapten. In the synthesis of 22, we developed butynyl carbamate as a piperidine ring N-protecting group to prevent possible side reaction, namely oxidation of the methylene at position 2. This protecting group is stable under usual basic and acidic conditions.     

聚(4-乙烯基吡啶)硫酸氢盐: 一个新的高效催化剂用于无溶剂条件下合成13-芳香基-茚并 [1,2-b] 石脑油 [1,2-e] 吡喃-12(13H)-酮（英文）简

An facile and efficient protocol for the synthesis of 13-aryl-indeno[1,2-b]naphtha[1,2-e]pyran- 12(13H)- ones has been developed that proceeds via the one-pot three-component sequential reaction of an aromatic aldehyde with β-naphthol and 2H-indene-1,3-dione under solvent-free conditions in the presence of a poly(4-vinylpyridinium)hydrogen sulfate (P(4-VPH)HSO₄) catalyst. The catalyst can be reused several times, making this procedure facile, practical, and sustainable. The simple experimental procedure, solvent-free reaction conditions, use of an inexpensive catalyst, short react time, and excellent yields are some of the major advantages of this methodology.     

Structural reassignment of the dehydration product of 2′-Hydroxywarfarin

The base catalyzed condensation reaction between 4-hydroxycoumarin and o-hydroxybenzal-acetone yields 6-methyl-6,12-methano-6H,12H,13H-[1]benzopyran[4,3-d][1,3]benzodioxocin-13-one as the product rather than 6-oxo-7-(2-oxopropyl)-6H, 7H-[1]benzopyrano[4,3-b][1]-benzopyran as had been previously postulated.     

Reactions of 4-Chloro-3-formylcoumarin with Arylhydrazines

The interaction of 3-formyl-4-coumarin with arylhydrazine hydrochlorides in the presence of sodium acetate gave the corresponding 3-arylhydrazonomethyl-4-chlorocoumarin, and with phenylhydrazine, 4-bromo- and 4-chlorophenylhydrazine hydrochlorides in the presence of two equivalents of triethylamine gave either 1-aryl- or 2-aryl[1]benzopyrano[4,3-c]pyrazol-4-ones depending on the reaction conditions. In reactions of 4-chloro-3-formylcoumarin with 2,4-dichloro-, 2,4-difluoro-, 2-hydroycarbonyl-, 4-nitro- and 3,5-di(trifluoromethyl)phenylhydrazine, 2-pyridyl- and 2-quinoxalylhydrazine in the presence of excess of triethylamine the 2-aryl[1]benzopyrano[4,3-c]pyrazol-4(2H)-ones were obtained exclusively. The structures of 1-phenyl- and 2-(2-pyridyl)[1]benzopyrano[4,3-c]pyrazolo-4(1H)ones were confirmed by X-ray crystallography. A simple method is proposed to distinguish between 1- and 2-substituted [1]benzopyrano[4,3-c]pyrazolo-4-ones on the basis of the ¹H NMR chemical shifts of the C(3)-H proton in two solvents - DMSO-d₆ and CDCl₃.     

Synthesis and selectivity in the formation of cyclophosphazene-derived 1,3-cyclohexadienes from reactions of RCpCo(COD) [R = MeOC(O)] with alkynes and alkenes

The first examples of mono and bisfluorophosphazene derived [eta (5)-cyclopentadienyl] [eta (4)-1,3-cyclohexadiene] cobalt complexes have been prepared along with the sandwich compound [eta (5)-carbomethoxycyclopentadienyl] [eta (4)-1,3-bis(pentafluorocyclotriphosphazenyl)-2,4-diphenylcyclobutadiene] cobalt and acetylene trimerized products from the reactions of [eta (5)-MeOC(O)C 5H 4]Co[COD], PhCCP 3N 3F 5 and phenylacetylene in the presence or absence of an additional cycloalkene or indene. Formation of these mono and bis fluorophosphazene derived cobalt cyclohexadiene complexes provide experimental evidence for a metallacyclopentadiene pathway for cyclohexadiene formation in CpCo catalyzed reactions. Selectivity is also observed in the formation of bisfluorophosphazene derived cyclohexadienes which stems from the fact that two P 3N 3F 5 units cannot be accommodated on vicinal carbon atoms of a carbacycle or metallacycle. Interestingly, reactions of (beta-phenylethynyl)pentafluorobenzene with [eta (5)-MeOC(O)C 5H 4]Co[COD] in the presence and absence of external cycloalkene under identical reaction conditions yielded only the cis and trans isomers of the metallocene [eta (5)-MeOC(O)C 5H 4]Co[eta (4)-C 4Ph 2(C 6F 5) 2] along with alkyne trimerized product indicating that the selectivity in cyclohexadiene formation is governed more by steric than electronic factors. All the new compounds were characterized by (1)H, (13)C, (31)P, and (19)F NMR as well as mass spectrometry and elemental analysis. Mono and bispentafluorocyclotriphosphazene derived [eta (5)-cyclopentadienyl] [eta (4)-1,3-cyclohexadiene] cobalt complexes and [eta (5)-carbomethoxycyclopentadienyl] [eta (4)-bis(1,3-pentafluorophenyl)-2,4-diphenylcyclobutadiene] cobalt have also been structurally characterized by single crystal X-ray analysis.     

Catalyst free synthesis of fused pyrido[2,3-d]pyrimidines and pyrazolo[3,4-b]pyridines in water

A one-pot,three-component condensation reaction of an aldehyde,benzoyl acetonitrile(3-oxo-3-phenylpropane nitrile) and 6- amino-1,3-dimethylpyrimidine-2,4(1H,3H)-dione or 3-methyl-1-phenyl-1H-pyrazol-5-amine in water to give fused pyrido[2,3- d]pyrimidines and pyrazolo[3,4-b]pyridines in high yields without any catalyst,is described.     

C,O-dialkylation of Meldrum's acid: synthesis and reactivity of 1,3,7,7-tetramethyl-4H,10H-6,8,9-trioxa-2-thiabenz[f]azulen-5-one

Reaction of Meldrum's acid with 3,4-bis(chloromethyl)-2,5-dimethylthiophene (1) or 3,4-bis(bromomethyl)-2,5-dimethylthiophene (2) produces the kinetically favored C,O-dialkylation product, 1,3,7,7-tetramethyl-4H,10H-6,8,9-trioxa-2-thiabenz[f]azulen-5-one (4). Recrystallization of 4 from refluxing methanol results in the methanolysis product 5-(4-methoxymethyl-2,5-dimethylthiophen-3-ylmethyl)-2,2-dimethyl[1,3]dioxane-4,6-dione (5). Attempts to isomerize 4 to the thermodynamically favored C,C-dialkylation product, 1,3-dimethyl-5,6-dihydro-4H-cyclopenta[c]thiophene(2-spiro-5)2,2-dimethyl-4,6-dione (8), result in the formation of 1,3-dimethyl-7,8-dihydro-4H-thieno[3,4-c]oxepin-6-one (6). The transformation occurs via a retro-Diels-Alder elimination of acetone followed by hydrolysis and decarboxylation of the resulting ketene. The ketene is trapped by tert-butyl alcohol, furnishing 1,3-dimethyl-6-oxo-7,8-dihydro-4H,6H-thieno[3,4-c]oxepine-7-carboxylic acid tert-butyl ester (7). All compounds are characterized spectroscopically as well as by X-ray crystallography of products 4-7.     

Expedient Approach for the Synthesis of Trispiropyrrolidine Bisoxindoles Through 1,3-Dipolar Cycloaddition Reactions

A series of trispiropyrrolidine bisoxindoles has been achieved via a three-component 1,3-dipolar cycloaddition reaction of 3-aryl-5-arylmethylenespiro[indole-3′,2-[1,3]thiazolane]-2′(1H),4-dione, isatin, and sarcosine in refluxing toluene, which produced the corresponding cycloadducts in good yields (79–88%). Their structures were determined by infrared, ¹H and ¹³C NMR, elementary analysis, and single-crystal x-ray diffraction analysis, and the cycloaddtion reaction was found to be highly regio- and stereoselective.     

Synthesis of cone, partial-cone, and 1,3-alternate 25, 27-Bis

The preparation of 25,27-bis[1-(2-ethyl)hexyl]- and 25, 27-bis[1-(2-tert-butoxy)ethyl]calix[4]arene-crown-6 combining one polyether crown-6 and one alkylchain O-attached on each side of a calix[4]arene in the cone, partial-cone, and 1,3-alternate conformations are reported. The control over 25, 27-bisalkylcalix[4]arene-crown-6 conformation via varying specific reaction conditions was studied. The series of calix[4]arenes have been prepared by two routes, which differ in the order in which the alkyl or polyether groups were introduced. Moreover, methods have been developed to selectively prepare the cone and partial-cone conformers by using an appropriate base in the alkylation reactions. The conformations of these new derivatives have been probed by (1)H NMR analysis and X-ray crystallography. The (1)H and (13)C NMR spectra of 25,27-bis[1-(2-ethyl)hexyl]calix[4]arene-crown-6, 1, 3-alternate 1, cone 2, and partial-cone 3 are also discussed.     

Synthetic anthracyclines: regiospecific total synthesis of a D-ring indole analogue of daunomycin

The 4-methoxy-5-methylpyrano[4,3-b]indole-1,3(4H,5H)-dione (9), prepared from methyl 3-methoxycarbonyl-1-methylindol-2-yl acetate (6), underwent a strong base-induced cycloaddition reaction with 2-chloro-6,6-ethylenedioxy-5,6,7,8-tetrahydro-1,4-naphthoquinone (11) to give the tetrahydronaphtho[2,3-b]carbazole-7,12-dione (10), regioselectively. The cycloadduct (10) was successfully converted to a D-ring indole analogue of daunomycin (1a).     

Novel synthesis, properties, and NAD+-NADH type redox ability of 1,3-dimethylcyclohepta[4,5]pyrrolo[2,3-d]pyrimidine- 2,4(1,3h)-dionylium ions annulated with additional pyrrolo[2,3-d]pyrimidine-1,3(2,4h)-dione and furan analogue, and their hydride adducts

[reaction: see text] A convenient preparation of novel cations 11a,b+ x BF4(-) and 12a,b+ x BF4(-), which are derived from annulation of the 1,3-dimethylcyclohepta[4,5]pyrrolo[2,3-d]pyrimidine-2,4(1,3H)-dionylium ion with additional pyrrolo[2,3-d]pyrimidine-1,3(2,4H)-dione and a furan analogue, was accomplished by a novel oxidative cyclization of 1,7-dihydro-7-[1',3'-dimethyl-2',4'(1',3'H)-dioxo-6'-(phenylamino)-pyrimidin-5'-yl]-1,3-dimethyl-10-phenylcyclohepta[4,5]pyrrolo[2,3-d]pyrimidine-2,4(1,3H)-dione 9 and its furan-analogue by using DDQ or photoirradiation under aerobic conditions. Structural characteristics of 11a,b+ and 12a,b+ were clarified on inspection of the UV-vis and NMR spectral data as well as X-ray crystal analyses. The stability of cations 11a,b+ and 12a,b+ is expressed by the pK(R+) values that were determined spectrophotometrically to be 10.7-12.6. The electrochemical reduction of 11a,b+ x BF4(-) and 12a,b+ x BF4(-) exhibited reduction potential at -0.93 to -1.00 (V vs Ag/AgNO3). The first reduction potential of 11a+ was reversible due to steric hindrance of two phenyl groups. The photoinduced oxidation reaction of 11a,b+ x BF4(-) and 12a,b+ x BF4(-) toward some amines under aerobic conditions was carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) with the recycling numbers of 0.6-30.3. Furthermore, as an example of the NAD+-NADH models, the reduction of a pyruvate analogue and some carbonyl compounds with the hydride-adduct of 11a+ x BF4(-) was accomplished for the first time to give the corresponding alcohol derivatives.     

Syntheses, structures and properties of cadmium benzenedicarboxylate metal-organic frameworks

The products isolated from the reaction between Cd(NO3)2 x 4H2O and 1,4-benzenedicarboxylic acid (H2bdc) in DMF are very dependent on the conditions. At 115 degrees C, the reaction gives [Cd(bdc)(DMF)]infinity, which has a three-dimensional network structure, whereas at 95 degrees C, 1 is formed alongside [Cd3(bdc)3(DMF)4]infinity 2, which has a two-dimensional network structure. When the reaction is carried out under pressure, it yields [Cd3(bdc)3(DMF)4]infinity 3, which is a supramolecular isomer of 2. The structure of 3 differs from that of 2 regarding the way the Cd3(O2CR)6 units are interlinked to form layers. When the reaction was carried out in DMF that had undergone partial hydrolysis, the only isolated product was [(NMe2H2)2[Cd(bdc)2] x 2DMF]infinity 4. Compound 4 has a three-dimensional triply-interpenetrated diamondoid structure, with dimethylammonium cations and DMF molecules included within the pores. The reaction between Cd(NO3)2 x 4H2O and H2bdc in DEF gave [Cd(bdc)(DEF)]infinity 5, regardless of the solvent quality. Compound 5 has a three-dimensional network structure. The reaction of Cd(NO3)2 x 4H2O and 1,3-benzenedicarboxylic acid (H2mbdc) in DMF gave [Cd(mbdc)(DMF)]infinity 6 which has a bilayer structure. The thermal properties of the new materials have been investigated, and the coordinated DEF molecules from 5 can be removed on heating to 400 degrees C without any change in the powder X-ray diffraction pattern. The H2 sorption isotherm for the desolvated material shows marked hysteresis between adsorption and desorption, and less adsorption than predicted by simulations. Kinetic data indicate that the hysteresis is not due to mass transfer limitations, and the most likely explanation for this behaviour lies in partial collapse of the framework to an amorphous phase under the conditions of activation.