19F and 1H NMR of aldimines of fluoroamino acids with pyridoxal-5′-phosphate

¹H and ¹⁹F NMR spectra were obtained for six Schiff bases (aldimines) formed by pyridoxal-5′-phosphate (PLP) with four fluorinated or their two parent non-fluorinated α-amino acids (phenylalanine and α-aminobutyric acid). pK_A Values were derived from ¹H and ¹⁹F titration curves. The imine nitrogen of the aldimines is very basic (～13) and sensitive to the electron withdrawing effect of fluorine. The pyridine nitrogen is less basic in the aldimines (～7) than in PLP (8.12) and is less sensitive to the electron withdrawing effect of the fluorine than is the imine nitrogen. The phosphate group has a pK in the same range (～6) and the chemical shifts of some nuclei are sensitive to both pK values. Protonation of the aldimine causes the ¹H signal to shift downfield at the methyl protons of the pyridine ring and at the aldehydic proton of the aldimine for the high pK value (except for the aldimines prepared from the β-fluorophenylalanine), but upfield at the aromatic proton and at the aldehydic proton of the aldimine for the low pK. Protonation of the aldimine causes the ¹⁹F signal of an aryl fluorine to shift downfield but gives an upfield shift at a β-fluorine. These data are related to the highly conjugated electronic structure of the Schiff bases.     

Transition Metal Ions: Charge Carriers that Mediate the Electron Capture Dissociation Pathways of Peptides

Electron capture dissociation (ECD) of model peptides adducted with first row divalent transition metal ions, including Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺, were investigated. Model peptides with general sequence of ZGGGXGGGZ were used as probes to unveil the ECD mechanism of metalated peptides, where X is either V or W; and Z is either R or N. Peptides metalated with different divalent transition metal ions were found to generate different ECD tandem mass spectra. ECD spectra of peptides metalated by Mn²⁺ and Zn²⁺ were similar to those generated by ECD of peptides adducted with alkaline earth metal ions. Series of c-/z-type fragment ions with and without metal ions were observed. ECD of Fe²⁺, Co²⁺, and Ni²⁺ adducted peptides yielded abundant metalated a-/y-type fragment ions; whereas ECD of Cu²⁺ adducted peptides generated predominantly metalated b-/y-type fragment ions. From the present experimental results, it was postulated that electronic configuration of metal ions is an important factor in determining the ECD behavior of the metalated peptides. Due presumably to the stability of the electronic configuration, metal ions with fully-filled (i.e., Zn²⁺) and half filled (i.e., Mn²⁺) d-orbitals might not capture the incoming electron. Dissociation of the metal ions adducted peptides would proceed through the usual ECD channel(s) via “hot-hydrogen” or “superbase” intermediates, to form series of c-/z ^•- fragments. For other transition metal ions studied, reduction of the metal ions might occur preferentially. The energy liberated by the metal ion reduction would provide enough internal energy to generate the “slow-heating” type of fragment ions, i.e., metalated a-/y- fragments and metalated b-/y- fragments.     

Dioxygen Activation by Redox-Active Bis(aldimine) Ligand Bridged Diruthenium Complex Possessing Singlet Ground State

The unexplored ‘actor’ behavior of redox-active bis(aldimine) congener, p-phenylene-bis(picoline)aldimine (L1), towards dioxygen activation and subsequent functionalization of its backbone was demonstrated on coordination with {Ru(acac)₂} (acac= acetylacetonate). Reaction under aerobic condition led to the one-pot generation of dinuclear complexes with unperturbed L1, imino-carboxamido (L2⁻), and bis(carboxamido) (L3²⁻)-bridged isovalent {Ru^II(μ-L1)Ru^II}, 1/ {Ru^III(μ-L3²⁻)Ru^III}, 3 and mixed-valent {Ru^II(μ-L2⁻)Ru^III}, 2 . Authentication of the complexes along with the redox non-innocence behavior of their bridge have been validated through structure, spectroelectrochemistry and DFT calculations. Kinetic and isotope labelling experiments together with DFT analyzed transition states justified the consideration of redox shuttling at metal/L1 interface for ³O₂ activation despite of the closed shell configuration of 1 (S=0) to give carboxamido derived 2 / 3 .     

The Photochemical Reaction of Vinylaziridines and Vinylazetidines with Chromium(0) and Molybdenum(0) (Fischer) Carbene Complexes

The [5+2] and [6+2] cycloaddition reactions of vinylaziridines and vinylazetidines with ketenes generated photochemically from chromium(0) and molybdenum(0) Fischer carbene complexes have been investigated. These processes constitute a straightforward and efficient route to azepanones and azocinones, respectively. The peculiar electronic properties of the metalated ketenes allow for the introduction of electron‐rich substituents in the final cycloadducts, a difficult task using conventional organic chemistry procedures. The versatility of the process is demonstrated by using Cr⁰ Fischer bis(carbene) complexes as metalated bis(ketene) precursors. These species produce tethered bis(azepanone)s in a single step under mild reaction conditions. Density functional theory calculations point to a stepwise reaction pathway through the initial nucleophilic attack of the nitrogen atom of the aziridine on the metalated ketene, followed by ring closure of the zwitterionic intermediate formed.     

A general synthesis of the acarnidines

A general synthetic route to the biologically active marine natural products, the acarnidines (10a–c),¹ and bolecules of the acarnidine type, is presented. The substituted homospermidine skeleton of the acarnidines was synthesised via an aldimine intermediate prepared from mono-BOC protected 1,5-diaminopentane (5) and the aldehyde (4).     

Direct observation of metalated N,N-dimethylbenzylamines by ft NMR spectroscopy

Direct observation of the respective ortho and benzylic metalated N,N-dimethylbenzylamines by ¹³C and ¹H FT NMR spectroscopy has been achieved. NMR assignments and the effect of temperature on the ¹³C resonances are reported. Evidence for an essentially trigonal benzylic carbon in α-potassio-N,N-dimethylbenzylamine is presented.     

Elemento-Organic Amines and Imines

Amines with mixed substituents containing two or three El? N bonds

1 El = a higher IVa, Va, or VIa element; by IVa, Va, and VIa elements are meant elements of the IV, V, and VI main groups of the periodic system

. are relatively stable if one or two of these bonds are (CH₃)₃ Si? N bonds. IR and ¹H? NMR studies indicate that the (p → d)π bond components of the element-nitrogen bonds steadily decrease from silicon, phosphorus, and sulfur toward their higher homologs. Because of the differences in the polarities of the element-nitrogen bonds, these substances can be used for selective insertion and cleavage reactions. The reaction of metalated N-silylaminoarsines with methyl chloride as well as the reaction of metalated N-trimethyl(IVa)-element-substituted amino-tert-butylphosphines with halogenotrimethyl(IVa) element compounds open new, simple routes for the conversion of elemento-organic amine systems into imine systems. The problem of reversible and irreversible (CH₃)₃ El ligand migration (1,3 shift) is discussed for trimethyl(IVa)element-substitued benzamidines, diaminophosphines, aminoiminophosphoranes, sulfinamides, and aminosulfimines.     

Metalated peptide fibers derived from a natural metal-binding peptide motif

Biological molecules serve as convenient scaffolds for the construction of nanoscopic architectures which can effectively interact with small molecules and metal complexes to extend their scope for nano(bio)technological applications. Metalloproteins possess natural metal ion binding motifs and the possibility of using these sequences to generate metalated peptide conjugates with defined metal ion coordination offers a facile entry into metalated supramolecular aggregates. This report describes the formation of metalated fibers from Cu-binding octarepeat motifs of the prion protein. Conjugate 1 effectively binds copper, silver, and manganese, leading to persistent length and thermally stable peptide fibers, which could be applied for molecular bioelectronic applications.     

Synthesis,Isolation and Crystal Structures of the Metalated Ylides [Cy3P-C-SO2Tol]M (M = Li,Na, K)

The preparation and isolation of the metalated ylides [Cy₃PCSO₂Tol]M ( ^Cy1-M ) (with M = Li, Na, K) are reported. In contrast to its triphenylphosphonium analogue the synthesis of ^Cy1-M revealed to be less straight forward. Synthetic routes to the phosphonium salt precursor ^Cy1 - H₂ via different methods revealed to be unsuccessful or low-yielding. However, nucleophilic attack of the ylide Cy₃P = CH₂ at toluenesulfonyl fluoride under basic conditions proved to be a high-yielding method directly leading to the ylide ^Cy1-H . Metalation to the yldiides was finally achieved with strong bases such as nBuLi, NaNH₂, or BnK. In the solid state, the lithium compound forms a tetrameric structure consisting of a (C–S–O–Li)₄ macrocycle, which incorporates an additional molecule of lithium iodide. The potassium compound forms a C₄-symmetric structure with a (K₄O₄)₂ octahedral prism as central structural motif. Upon deprotonation the P–C–S linkage undergoes a remarkable contraction typical for metalated ylides.     

N-BUTYLLITHIUM-INDUCED REACTIONS OF σ-METHYLARENESULFONATES AND σ-METHYL-ARENESULFONAMIDES

Abstract

σ-Methyldiaryl sulfones rearrange to isomeric sulfinic acids under the influence of strong base¹ (n-butyllithium in ether or potassium t-butoxide in dimethyl sulfoxide). Studies of the chemistry of arenesulfonyl systems, initially metalated at an ortho methyl substituent, have now been extended to appropriate aryl arenesulfonates and arenesulfonamides.     

Evidence for interphasial amide formation between surface-bound poly(3-aminopropyltrisiloxane) and polyamide-6 in glass bead reinforced polyamide-6 model composites

Glass beads pretreated with equal amounts of either natural abundance-or selectively ¹³C-enriched (3-¹³C)-3-aminopropyltriethoxysilane were used as filler for the preparation of polyamide-6 model composites. After isolation of the glass beads from the composite by dissolving the polymer matrix in trifluoroethanol, the glass beads were investigated by pyrolysis capillary gas chromatography–mass spectrometry. The identification of the aldimine derivatives 1 and 2 , respectively, containing the ¹³C-label at C3 next to the imine nitrogen atom provides compelling evidence for amide formation between carboxylic end-groups of the polyamide-6 and amine groups of the surface-bound poly(3-aminopropyltrisiloxane) in the interphase region during composite preparation.     

Combination of Optimization and Metalated‐Ligand Exchange: An Effective Approach to Functionalize UiO‐66(Zr) MOFs for CO2 Separation

The strategy to functionalize water‐stable metal–organic frameworks (MOFs) in order to improve their CO₂ uptake capacities for efficient CO₂ separation remains limited and challenging. We herein present an effective approach to functionalize a prominent water‐stable MOF, UiO‐66(Zr), by a combination of optimization and metalated‐ligand exchange. In particular, by systematic optimization, we have successfully obtained UiO‐66(Zr) of the highest BET surface area reported so far (1730 m² g^?1). Moreover, it shows a hybrid Type I/IV N₂ isotherm at 77 K and a mesopore size of 3.9 nm for the first time. The UiO‐66 MOF underwent a metalated‐ligand‐exchange (MLE) process to yield a series of new UiO‐66‐type MOFs, among which UiO‐66‐(COONa)₂‐EX and UiO‐66‐(COOLi)₄‐EX MOFs have both enhanced CO₂ working capacity and IAST CO₂/N₂ selectivity. Our approach has thus suggested an alternative design to achieve water‐stable MOFs with high crystallinity and gas uptake for efficient CO₂ separation.     

New observations on the metalation of naphthalene and β-ethylnaphthalene by potassium

A stable dinegative ion can be formed when naphthalene is metalated by an excess of potassium in tetrahydrofuran at 25°C; this previously unreported species obtained only at naphthalene concentrations lower than 3 x 10^-2 m l^-1. In the case of β-ethylnaphthalene, the initial dianion is isomerized into a dihydronaphthalene monoanion carrying an extra-cyclic anion as a result of an intramolecular hydrogen transfer; this dianionic species can be formed at concentrations higher than 3 x 10^-2 m l^-1.     

Active centres in the anionic polymerization of methoxypolyethyleneglycol methacrylates

The nature of the propagation sites in the anionic polymerization of methoxypolyethyleneglycol methacrylates in the presence of Li counterion has been studied through i.r. spectra of the model compounds, Li derivatives of isobutyric acid esters, (CH₃)₂CLiCOO(CH₂CH₂O)_nCH₃ with n from 1 to 4, and of 2,2,4-trimethylglutaric acid esters. The wavelength of the absorption band of lithioisobutyrates, due to the vibration of the

grouping, is independent of the nature of the solvent. This fact has been explained by intramolecular solvation of Li⁺ by the polyethereal alcoholic residue. The spectra of the metalated trimethylglutarates give evidence of concurrent solvation of Li⁺ by the alkoxy carbonyl group in the γ-position and the alcoholic residue of the ester group bound to the metalated carbon atom. When the number of ethyleneoxide units in the polyethereal chain is increased, the coordination of Li⁺ to it prevails over the interaction with the γ-malkoxycarbonyl group.     

C64 Nanographene Tetraimide—A Receptor for Phthalocyanines with Subnanomolar Affinity

Phthalocyanines are extensively used by the dye and pigment industry and in photovoltaic and photodynamic therapy research due to their intense absorption of visible light, outstanding stability, and versatility. As pigments, the unsubstituted phthalocyanines are insoluble owing to strong intermolecular π-π-stacking interactions, which causes limitations for the solution chemistry for both free base and metalated phthalocyanines. Here we show a supramolecular host–guest strategy to dissolve phthalocyanines into solution. C₆₄ nanographene tetraimide ( 1 ) binds two free base/zinc/copper phthalocyanines in a 1 : 2 stoichiometry to solubilize phthalocyanines as evidenced by ¹H NMR spectroscopy, UV/Vis absorption and single-crystal X-ray analysis. Binding studies using a tetra-tert-butyl-substituted soluble phthalocyanine revealed binding affinities of up to 10⁹ M⁻¹ in tetrachloromethane, relating to a Gibbs free energy of −52 kJ mol⁻¹. Energy decomposition analysis revealed that complexes between 1 and phthalocyanines are stabilized by dispersion interactions followed by electrostatics as well as significant charge-transfer interactions.     

Synthesis and acid-catalyzed transformations of solvomercuration adducts of 2-nitrobenzylcyclopropane. First stable metalated 1-oxo-3,4-dihydro-1H-2,1-benzoxazinium ions

Sovomercuration adducts of 2-nitrobenzyl-, 2-nitro-4,5-(ethylenedioxy)benzyl-, and 4,5-dimethoxy-2-nitrobenzylcyclopropanes were synthesized. The adducts reacted with sulfuric, fluorosulfonic, or chlorosulfonic acid to give 3-(2-chloromercurio)ethyl-1-oxo-3,4-dihydro-1H-2,1-benzoxazinium ions whose stability depended on the nature of substituents in the aromatic ring. Unstable metalated 1-oxo-3,4-dihydro-1H-2,1-benzoxazinium ions underwent fast protodemercuration to form metal-free 3-ethyl-1-oxo-3,4-dihydro-1H-2,1-benzoxazinium ions. Stable analogs in the above acids did not change to an appreciable extent over a period of 48–72 h. Hydrolysis of stable metalated 1-oxo-1,3-dihydro-2,1-benzoxazolium ions afforded only 4-chloromercurio-1-(2-nitroaryl)butan-2-ol.     

Tridentate anilido‐aldimine magnesium and zinc complexes as efficient catalysts for ring‐opening polymerization of ε‐caprolactone and L‐lactide

A novel tridentate anilido‐aldimine ligand, [o‐C₆H₄(NHAr)? HC?NCH₂CH₂NMe₂] (Ar = 2,6‐ⁱPr₂C₆H₃, L ‐H, 1 ), has been prepared by the condensation of N, N‐dimethylethylenediamine with one molar equivalent of 2‐fluoro‐benzaldehyde in hexane, followed by the addition of the lithium salt of diisopropylaniline in THF. Magnesium (Mg) and zinc (Zn) complexes supported by the tridentate anilido‐aldimine ligand have been synthesized and structurally characterized. Reaction of L ‐H ( 1 ) with an equivalent amount of MgⁿBu₂ or ZnEt₂ produces the monomeric complex [ L MgⁿBu] ( 2 ) or [ L ZnEt] ( 3 ), respectively. Experimental results show that complexes 2 and 3 are efficient catalysts for ring‐opening polymerization of ε‐caprolactone (CL) and L ‐lactide (LA) in the presence of benzyl alcohol and catalyze the polymerization of ε‐CL and L ‐LA in a controlled fashion yielding polymers with a narrow polydispersity index. In both polymerizations, the activity of Mg complex 2 is higher than that of Zn complex 3 , which is probably due to the higher Lewis acidity and better oxophilic nature of Mg²⁺ metal. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4927–4936, 2009     

Electron capture dissociation of peptides metalated with alkaline-earth metal ions

The possible use of divalent alkaline-earth metal ions, including Mg2+, Ca2+, Sr2+, and Ba2+, as charge carrier for electron capture dissociation of peptides was investigated. Model peptides of RGGGVGGGR and NGGGWGGGN were used to simplify the interpretation of spectral information. It was demonstrated that useful electron capture dissociation (ECD) tandem mass spectra of these metalated peptides could be generated. Interestingly, peptides metalated with different alkaline-earth metal ions generated very similar ECD tandem mass spectra. Metalated c-ions and z-ions were the predominant fragment ions. Only Mg2+-metalated peptides gave somewhat different results. Some nonmetalated c-ions were observed from ECD of [RGGGVGGGR + Mg]2+ but not from [NGGGWGGGN + Mg]2+. Together with some ab initio calculations, it was established that the bound metal ions might activate the acidity of the amide hydrogen. With the presence of high proton affinity moiety, such as N-terminal amino group and/or side chain of the arginine residues, the metalated peptide ions could exist predominantly in their zwitterion forms, in which one or two backbone amide group(s) was deprotonated and the high proton affinity functional group(s) was protonated. It was believed that electron capture leads primarily to the reduction of the mobile proton rather than the metal ions. With this zwitterion model, the formation of nonmetalated c-fragments and the generation of similar ECD spectra for peptides metalated with various alkaline-earth metal ions could readily to be explained. Another interesting observation in the ECD mass spectra of metalated peptides is related to the enhanced formation of the minor ECD products, i.e., (c - 1)(+*) and (z + 1)+ ions. Together with ab initio calculations using a truncated peptide model, various possible reaction mechanisms for the formation of these minor ECD products were evaluated. It was concluded that hydrogen transfer between the initiated formed c and z(.) species plays an important role in the formation (c - 1)(+*) and (z + 1)+ ions. Although peptides metalated with these metal ions do not have better ECD efficiency compared to the multiply-protonated peptides, it provides practical accessibility of ECD methods to analyze small peptides with no basic amino acid residues.     

meso-Cumulenic 2H-Corroles from meso-Ethynyl-3H-corroles

Alkynyl-substituted 3H-corrole 9 a was converted to [3]cumulenic 2H-corrole 10 a by treatment with trimethylsilyl chloride (TMSCl), and 1,3-butadiyne-bridged 3H-corrole dimer 11 b was transformed into [5]cumulene-bridged 2H-corrole dimer 12 b by oxidation with PbO₂. Both 10 a and 12 b were metalated to form Zn^II complexes 10 a-Zn and 12 b-Zn . The structures of 10 a-Zn and 12 b-Zn show planar conformations with bond-length alternations that are analogous to those of tetraaryl [n]cumulenes. The cumulenic corrole dimers 12 b and 12 b-Zn display large NIR absorption bands in the range of 700–1400 nm (maximum ϵ≈1.0×10⁵ m ⁻¹ cm⁻¹) owing to the effective π-conjugation between the two corrole units through the [5]cumulene bridge.     

Anionic synthesis of poly[ethylene methylene bis(4-phenyl-carbamate)-g-acrylonitrile]

A relatively high-molecular-weight polyurethane based on MDI and ethylene glycol was prepared and characterized. This polymer was metalated with sodium hydride in N,N-dimethylformamide (DMF) at about 0°C. Metalation was confirmed principally by spectroscopic identification of the N-methyl derivative obtained by coupling the metalated polymer with methyl iodide. Under appropriate reaction conditions the metalated polyurethane was used for the anionic graft polymerization of the reactive monomers acrylonitrile and ethylene and propylene sulfides. Attempted anionic graft polymerizations with other monomers, including styrene and ethylene and propylene oxides, were unsuccessful. The polyurethane grafted with acrylonitrile was separated by fractionation from accompanying small amounts of polyacrylonitrile, a low-molecular-weight homopolymer. One sample of polyurethane grafted with acrylonitrile was identified by microanalysis, IR, NMR, and increase in weight and was also characterized by differential thermal analysis.