Preparation of 2‐Amino‐1,3‐butadienes as N‐Pyridine Derivatives

2‐Amino‐1,3‐butadienes as pyridine derivatives have been prepared from corresponding dihydrothiazolo[3,2‐a]pyridinium salts in reactions with a strong base. The pyridinium salts were prepared from pyridine‐2(1H)‐thiones and trans‐1,4‐dibromo‐2‐butene by a vicinal and chemoselective formation of 3‐vinyldihydrothiazolo[3,2‐a]pyridinium salts. A strong base was used for selective proton removal from the vinyl‐substituted 3‐position. A subsequent ring opening provided 2‐substituted 1,3‐butadienes with the azine appended at the annular nitrogen. Simple S‐alkylation yielded a corresponding azinium salt, thereby introducing electrophilic character to the 1,3‐butadiene system. Hydrolysis of the sulfide function provided the corresponding pyridin-2(1H)‐one attached to the 1,3‐butadiene in the 2‐position.     

Copolymerization of N‐tert‐Butylacrylamide with Ethylene Glycol Dimethacrylate

N‐tert‐butylacrylamide (NtBA) was copolymerized with ethylene glycol dimethacrylate (EDMA) in butanone solution over a wide composition and conversion range, using dibenzoyl peroxide (Bz₂O₂) as a free‐radical initiator. The copolymer composition was determined from the nitrogen content. Using only low conversion (≤20%) collected for the copolymerization reactions, monomer reactivity ratios were estimated using the Kelen‐Tüdos graphical method and were found to be r₁=0.26 (NtBA) and r₂=7.05 (EDMA). In order to get a better insight into the mechanism of nanoporous copolymers of NtBA with EDMA preparation by thermal degradation of copolymers of N‐acryl‐N,N′‐di‐tert‐butylurea (A‐DitBuU) with EDMA, nonporous copolymers (model compound), of the same chemical structure and composition, were prepared by performing copolymerization of NtBA with EDMA up to the high conversion of 97–100%. Thermal behavior of nanoporous and nonporous copolymers of NtBA with EDMA was studied.     

Efficient Preparation of Hybrid Linear‐Branched Esters of PEG‐PEE Derivatives

A simple and efficient preparation of a number of hybrid linear‐branched PEG esters are described. The polymers are generated by direct coupling of PEG–carboxylic acids and a variety of pentaerythritol ethoxylates using carbon tetrabromide catalyst.     

Efficient Iodine‐Catalyzed Preparation of Benzylidene Acetals of Carbohydrate Derivatives

An efficient preparation of benzylidene acetals of carbohydrate derivatives catalyzed by iodine has been developed. Yields were excellent in every case.     

Preparation and Chemical Behavior of 2‐(tert‐Butoxycarbonyl)amino‐3‐bromomethyl Pyridine,a Novel Alkylating Agent

Synthesis of a novel heterocyclic alkylating agent has been developed. Its instability toward elevated temperatures and/or polar media can be used to prepare 8‐aza‐1,4‐dihydrobenzo[1,3‐d]oxazin‐2‐one.     

Synthesis of cis‐3‐methyl‐4‐aminopiperidine Derivatives

A facile approach for the preparation of cis‐3‐methyl‐4‐aminopiperidine derivatives is described. The synthesis was carried out via regioselective ring opening of N‐benzyl‐3‐methyl‐3,4‐epoxi‐piperidine (8), which can be easily obtained in two steps from the corresponding N‐benzyl‐pyridinium salt (5). Seven new cis‐3‐methyl‐4‐amino and amido piperidines compounds were obtained.     

Odorless Preparation of Thioglycosides and Thio‐Michael Adducts of Carbohydrate Derivatives

A general, odorless, one‐pot methodology has been developed for the preparation of 1,2‐trans‐thioglycosides and thio‐Michael addition products of carbohydrate derivatives through triphenyl phosphine‐mediated cleavage of disulfides and reaction of the thiolate formed in situ with glycosyl bromides and glycosyl conjugated alkenes.     

Synthesis and Biological Evaluation of Novel Isonucleosides with 1,2,4‐Triazole‐3‐Carboxamide

Novel 1,2,4‐triazole isonucleosides (1 and 2) were efficiently synthesized starting from D‐ribose and D‐xylose, respectively. The key steps were condensation of cyclic sulfate 8 with methyl‐1,2,4‐triazole‐3‐carboxylate and nucleophilic displacement of the tosylate 15 with methyl‐1,2,4‐triazole‐3‐carboxylate, respectively.     

Preparation of N‐Chloroamides Using Trichloroisocyanuric Acid

Abstract

Amides are efficiently converted to N‐chloroamides by trichloroisocyanuric acid in methanol.     

Novel Copolymers of Styrene and Some Ring‐Substituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, ring‐substituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₄CH?C(CN)CON(CH₃)₂ (where R is 3‐benzyloxy, 4‐benzyloxy, 3‐ethoxy‐4‐methoxy, 3‐bromo‐4‐methoxy, 5‐bromo‐2‐methoxy, 2‐chloro‐6‐fluoro) were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.     

Novel Copolymers of Styrene and Some Ring‐Substituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, ring‐substituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₄CH?C(CN)CON(CH₃)₂ (where R is 4‐(CH₃)₂N, 4‐CH₃CO₂, 4‐CH₃CONH, 2‐CN, 3‐CN, 4‐CN, 4‐(C₂H₅)₂N) were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.     

Synthesis of Some New N‐Substituted Pyrroles,Pyrrolo[1,2‐a]quinazoline,and Diaza‐as‐indacene Derivatives

2‐Phenyl‐1,1,3‐tricyano‐3‐bromopropene 1 reacts with the aromatic amines 2a–f and 6a–c to afford the N‐substituted pyrroles 4a–d, the pyrrolo[1,2‐a]quinazoline derivatives 5a, b, and the diaza‐as‐indacene derivatives 7a–c and 8a–c, presumably via elimination of hydrogen bromide followed by cyclization of the formed acyclic intermediates. All structures are confirmed by analytical and spectral data.     

Practical Synthesis of N‐Alkyl‐N‐alkyloxycarbonylaminomethyl Prodrug Derivatives of Acetaminophen,Theophylline, and 6‐Mercaptopurine

We report a novel synthesis of N‐alkyl‐N‐alkyloxycarbonylaminomethyl (NANAOCAM) prodrugs of acetaminophen, theophylline, and 6‐mercaptopurine by alkylation of the corresponding drug molecule with N‐alkyl‐N‐alkyloxycarbonylaminomethyl chlorides in good yield. Most of the alkylating agents were efficiently synthesized by chloromethylation of N‐alkyl carbamic acid alkyl esters, which in turn were made from alkyl amines and alkyl chloroformates. In cases where the alkyl chloroformates were not available, synthesis of N‐alkyl carbamic acid alkyl esters was accomplished by converting an alcohol to a chloroformate or to an activated acylating agent such as acyl imidazoles or p‐nitrophenylcarbonate esters, followed by their reaction with alkyl amines.     

Crystal Structures of β‐1‐N‐Chloroacetamido Derivatives of d‐Glucose and d‐Galactose

Crystal structures of 1‐N‐(β‐d‐glucopyranosyl)chloroacetamide (1), an inhibitor of glycogen phosphorylase, and the corresponding galactopyranosyl amide (2) have been determined. Both crystals belong to P2₁2₁2₁ space group with 1 having the unit cell dimensions of a = 7.939(3), b = 9.547(3) and c = 14.157(2) Å, while those of 2 are, a = 7.636(10), b = 9.004(8) and c = 14.807(5) Å. The sugar ring takes a ⁴ C ₁ conformation and the amide linkage exists in Z‐anti conformation in both crystals. The torsion angle O5–C1–N1–C1′ is ? 93.9(5) for 1 and ? 111.5(3)° for 2. The conformational preference of Cl and N1 in 1 and 2 is found to be between anti and gauche. The molecular assembly in both 1 and 2 is stabilized by a finite chain of hydrogen bonds starting from N1H and ending at O1′, whereas a ten membered hydrogen‐bonded ring involving O4H and O5 is observed in 1.     

Convenient Preparation of N,N′‐Diphenyl‐N,N′‐bis(4‐aminophenyl)‐p‐phenylenediamine

Abstract

This article describes modified conditions to prepare N,N′‐diphenyl‐N,N′‐bis(4‐aminophenyl)‐P‐phenylenediamine in 60% overall yield.     

Preparation of Alkyl Carbamate of 1‐Protected Indole‐3‐methylamine as a Precursor of Indole‐3‐methylamine

A series of alkyl carbamates 3 of 1‐protected indole‐3‐methylamines, alkyl carbamates 6 of thiophenylmethylamines, and pyrrolylmethylamines were prepared from the corresponding acetamides 2 and 5 in good to excellent yields via diacetoxyiodobenzene‐promoted Hofmann rearrangement. For a successful Hofmann rearrangement, an electron‐withdrawing group on position 1 of indolylacetamide and pyrrolylacetamide was required. The alkyl carbamate 3g was demonstrated to serve well as a stable precursor of 1‐protected indole‐3‐methylamine 1.     

Regioselective N‐Arylation of Some Pyrimidine and Purine Nucleobases

N‐Arylation of some pyrimidine and purine nucleobases in the presence of SiO₂ and Cs₂CO₃ under solvent‐free as well as in solution conditions is described. In these conditions, N1‐aryl pyrimidines and N9‐aryl purines have been obtained regioselectively in moderate to high yields with relatively short reaction times.     

One Facile Preparation of N‐Aroyl‐N′‐arylsulfonylhydrazines by Oxidation of Aromatic Aldehyde N‐Arylsulfonylhydrazones with bis(Trifluoroacetoxy)iodobenzene

N‐aroyl‐N′‐arylsulfonylhydrazines can be obtained by oxidation of aromatic aldehyde N‐arylsulfonylhydrazones with bis(trifluoroacetoxy)iodobenzene in acetone at room temperature in mild to good yields.     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

Efficient Synthesis of N‐Oxide Derivatives: Substituted 2‐(2‐(Pyridyl‐N‐oxide)methylsulphinyl)benzimidazoles

Different substituted 2‐chloromethylpyridyl derivatives (6a–d) were oxidized with mCPBA to give the respective 2‐chloromethylpyridine‐N‐oxide derivatives (7a–d) at low temperature, which on condensation with 2‐mercapto‐1H‐benzimidazole (8a–c) in the presence of aprotic solvents give the 2‐[[(pyridin‐2‐yl‐1‐oxide)methyl]sulfanyl]‐1H‐benzimidazole (9a–d) in good yield. Finally, 9a–d oxidized with mCPBA in chlorinated solvent gives a mixture of 2‐[[(pyridin‐2‐yl‐1‐oxide)methyl]sulfonyl]‐1H‐benzimidazole (3a–d, 10%) and 2‐[[(pyridin‐2‐yl‐1‐oxide) methyl]sulfinyl]‐1H‐benzimidazole (4a–d, 90%) derivatives.