Ionic‐Liquid‐Supported Total Synthesis of Sansalvamide A Peptide

A facile and efficient total synthesis of bioactive sansalvamide A peptide has been accomplished, including the‐ionic‐liquid supported method and final PyBOP‐promoted ring closure.     

Synthesis of 2‐Aminothiophenes on Ionic Liquid Phase Support using the Gewald Reaction

The first report of the use of task‐specific ionic liquid as soluble support for the Gewald synthesis of 2‐aminothiophenes is reported in this article. This synthetic method is simple and efficient, and the products are obtained in good to excellent yields with high purities, without the need for chromatographic purification.     

Novel Traceless Liquid‐Phase Synthesis of Coumarin Derivatives on Poly(Ethylene Glycol) Support

Coumarin derivatives were prepared by the von Pechmann reaction of PEG‐bound acetoacetate reagent with phenols in the presence of TiCl₄ in excellent yield and purity with a facile workup procedure. The polymer reagent could be recycled two to four times without diminishing the yield or purity.     

Synthesis of the C‐Glycoside of Methyl α‐d‐Altropyranosyl‐(1→4)‐α‐d‐glucopyranoside

The C‐glycoside of methyl α‐d‐altropyranosyl‐(1→4)‐α‐d‐glucopyranoside 2 was prepared in a convergent fashion, from readily available precursors, 4‐O‐tert‐butyldiphenylsilyl‐1,2‐O‐isopropylidene‐d‐erythro‐S‐phenyl monothiohemiacetal 13 (five steps from D‐ribose) and the known acid, methyl 2,3,6‐tri‐O‐benzyl‐4‐C‐(carboxymethyl)‐4‐deoxy‐α‐d‐glucopyranoside 17 (seven steps from methyl α‐d‐glucopyranoside). The key reactions in the synthesis are the oxocarbenium ion cyclization of thioacetal‐enol ether 19 to a C1 substituted glycal 20, and the stereoselective hydroboration of 20 to the α‐C‐altroside 21.     

Liquid-Phase Synthesis of Methyl (2Z)-2-Arylsulfonylmethyl-2- alkenoates from PEG-Supported α-Phenylselenopropionate

Treatment of lithio derivative of novel PEG-supported a-phenylselenopropionate with aldehydes, followed by oxidation-elimination with 30% hydrogen peroxide, formed Baylis-Hillman products, which were then reacted with sodium arylsulfinate. The resulting sulfonylated products were cleaved from the PEG efficiently affording methyl (2Z)-2-arylsulfonylmethyl-2-alkenoates in good yields and high purities.     

One‐Step Synthesis of Tolunitriles by Heterogeneously Catalyzed Liquid‐Phase Ammoxidation

Tolunitriles have been efficiently synthesized by selective ammoxidation of corresponding xylene over silica‐supported Co‐Mn‐Mg‐Ni catalysts, without solvent for the first time in a one‐pot procedure. The selectivity for mono‐nitriles is almost 100%.     

Facile Solid‐Phase Synthesis of Aliphatic Aldehydes Using Novel Polymer‐Supported Phenylselenomethyltrimethylsilane

Treatment of a novel polymer‐supported phenylselenomethyltrimethylsilane reagent with LDA followed by alkylation and oxidative deselenation efficiently afforded aliphatic aldehydes in moderate to good yields with excellent purities.     

A Convenient Synthesis of N‐Boc‐Protected α‐Aminonitriles from α‐Amidosulfones

Abstract

Synthesis of N‐Boc‐protected α‐aminonitriles starting from N‐Boc‐protected α‐aminosulfones is described. Treatment of the sulfone with two equivalents of potassium cyanide in 2‐propanol or dichloromethane‐H₂O under phase transfer condition affords crystalline N‐Boc‐protected α‐aminonitriles in good yield. Hydrolysis of the aminonitriles provides a convenient access to racemic α‐amino acids.     

Synthesis of Acylated Methyl 2‐Acetamido‐2‐Deoxy‐α‐D‐Mannopyranosides

Abstract

2‐Acetamido‐2‐deoxy‐β‐D‐mannopyranose (1) was glycosylated by the Fischer method using an acidic ion‐exchange resin as the catalyst to give α‐methyl glycoside 2. Selective pivaloylations of methyl 2‐acetamido‐2‐deoxy‐α‐D‐mannopyranoside (2) have been studied under various reaction conditions. Two partially pivaloylated products were submitted to additional acetylations. All structures were established by NMR spectroscopy. Structure of the methyl 2‐acetamido‐2‐deoxy‐3,6‐di‐O‐pivaloyl‐α‐D‐mannopyranoside (4) was determined by X‐ray analysis.     

Rapid Microwave‐Assisted Liquid‐Phase Synthesis of 4‐Substituted‐5‐methoxycarbonyl‐6‐methyl‐3,4‐dihydropyridones on Poly(ethylene Glycol) Support

4‐Substituted‐5‐methoxycarbonyl‐6‐methyl‐3,4‐dihydropyridones have been efficiently prepared on the soluble polymer polyethylene glycol (PEG) 4000 by solvent‐free microwave irradiation through a one‐pot condensation of PEG‐bound acetoacetate, Meldrum's acid, ammonium acetate, and the appropriate aldehyde in the presence of a catalytic amount of polyphosphoric acid. The polymer‐supported synthesis provided the target compounds in excellent yield and purity with a facile workup procedure.     

Highly Selective and Sensitive Triiodide PVC‐Based Membrane Electrode Based on a New Charge Transfer Complex of 2‐(((2‐(((E)‐1‐(2‐Hydroxyphenyl) Methylidine) Amino) Phenyl) Imino) Methyl) Phenol for Nano‐Level Monitoring of Triiodide

Abstract

A highly selective and sensitive triiodide sensor based on a 2‐(((2‐(((E)‐1‐(2‐hydroxy phenyl) methylidine) amino) phenyl) imino) methyl) phenol with iodine (CTC) as membrane carrier was developed. The electrode revealed a Nernstian behavior over a very wide triiodide‐ion concentration range (5.0×10^?8–1.0×10^?2 M), and relatively low detection limit (3.0×10^?8 M). The potentiometric response is independent of the pH of solution in the pH range of 3.0–10.0. The electrodes manifest advantages of low resistance, very fast response (<12 s), and most importantly, good selectivities relative to a wide variety of inorganic and organic anions, including iodide, bromide, chloride, fluoride, sulfite, sulfate, cyanide, thiocyanate, and acetate. In fact, the selectivity behavior of the proposed triiodide ion‐selective electrode shows great improvements compared to the previously reported electrodes for the triiodide ion. The proposed membrane sensor can be used for at least 6 months without any significant divergences in the potential. The electrode was successfully applied as an indicator electrode in the titration of triiodide with thiosulfate ion.     

Phase Transfer Catalysed Synthesis of Methyl α-Bromomethylacrylate

Methyl α-bromomethylacrylate 1 is an important intermediate both as a starting material for specifically functionalized polymers and for use in general organic synthesis. As an example of the former it has been used to prepare polymeric anthraquinoid dyes¹. Synthetically, its bifunctional reactivity towards nucleophilic attack has made it useful in the preparation of both spiro² and bicyclic^3,4 ring systems. Several reports of synthetic methods leading to α-methylenelactones, having potential antitumor activity, have also been reported which use α-bromomethylacrylate as a starting point⁵.     

Synthesis of (E)‐ and (Z)‐5‐(Bromomethylene)furan‐2(5H)‐one by Bromodecarboxylation of (E)‐2‐(5‐Oxofuran‐2(5H)‐ylidene)acetic Acid

(E)‐ and (Z)‐5‐(bromomethylene)furan‐2(5H)‐one have been prepared starting from the commercially available adduct between furan and maleic anhydride. A bromodecarboxylation reaction is a key step in the synthesis. The reaction gives the (E)‐ or (Z)‐5‐(bromomethylene)furan‐2(5H)‐one as the major product, dependent on the method used in the bromodecarboxylation.     

Fly‐Ash‐Supported Synthesis of 2‐Mercaptobenzothiazole Derivatives under Microwave Irradiation

Microwave‐assisted, solvent‐free alkylation and acylation of 2‐mercaptobenzothiazole has been attempted using silica gel, alumina, and a new solid support, fly ash. Fly ash, a waste generated at thermal power stations, could be used as solid support just as efficiently as commercial supports. The additional features of methodology include a much faster reaction, easy workup, higher yields, higher purity of the products, and an ecofriendly approach.     

Stereoselective Synthesis of (2S, 8S)‐2‐Benzyl Hexahydro‐pyrrodizin‐3‐one Starting from (L)‐Proline Based on Stereoselective Benzylation

Abstract

A pyrrolizidine alkaloid, (2S, 8S)‐2‐benzyl hexahydro‐pyrrodizin‐3‐one, was synthesized from (L)‐proline using diastereoselective benzylation as the key step. The absolute configuration of the target compound was confirmed through 2D H‐H COSY and H‐H NOESY spectra.     

Phase Behavior of Nonaqueous Microemulsions of n‐Methyl‐2‐Pyrrolidinone/Diisooctylsodium Sulfosuccinate (AOT)/Alkanes

The phase behavior of n‐methyl‐2‐pyrrolidinone (NMP) microemulsions formed by the combination of NMP and oils (hexane, heptane, octane, and isooctane) in the presence of diisooctylsodium sulfosuccinate (AOT) were studied. The ternary plots were constructed and found to be similar in nature and consisted of a gel, a clear, or microemulsion, and a two phase region. Effects of varying amounts of water added to NMP and varying the chain length of n‐alkane (as oil) on the microemulsion region were investigated. Fluorescence probes such as Auramine‐O and the sodium salt of aniline‐1‐ napthalenesulfonic acid were employed to investigate the nature of the microemulsion region. Volume and temperature induced percolation studies have indicated the absence of percolation process in these microemulsion systems.     

Perchloric Acid Supported on Silica Catalyzed Efficient Synthesis of 1,5‐Benzodiazepines

Perchloric acid adsorbed on silica gel efficiently catalyzed the condensation of o‐phenylenediamines (OPDA) with cyclic and acyclic ketones at ambient temperature to afford 1,5‐benzodiazepines in good yields under solvent‐free conditions.     

Carrier‐Mediated Transport of Hg(II) through Bulk and Supported Liquid Membranes

The transport of Hg (II) ions from an aqueous solution into an aqueous receiving solution through bulk and supported liquid membranes containing a calix[4]arene derivative 1 as a carrier was examined. The kinetic parameters of bulk liquid membrane studies were analyzed assuming two consecutive, irreversible first‐order reactions. The influence of temperature, stirring rate, carrier concentration and solvent on the kinetic parameters (k₁, k₂, R_m ^max, t_max, J_d ^max, J_a ^max) has also been investigated. The membrane entrance rate, k₁, and the membrane exit rate, k₂, increased with increasing temperature and stirring rate. The activation energy values are calculated as 4.87 and 48.63 kj mol^?1 for extraction and reextraction, respectively. The values of calculated activation energy indicate that the process is diffusionally controlled by species. Also, the transport behavior of Hg²⁺ from aqueous solution through a flat‐sheet supported liquid membrane has been investigated by the use of calix[4]arene derivative 1 as carrier and Celgard 2500 as the solid support. A Danesi mass transfer model was used to calculate the permeability coefficients for each parameter studied. The highest values of permeability were obtained with 2‐nitrophenyloctyl‐ether (NPOE) solvent and the influence was found to be in the order of NPOE>chloroform>xylene.     

Direct and Convenient Method of Regioselective Benzylation of Methyl α‐D‐Glucopyranoside

A facile and convenient method for the direct preparation of methyl 2,3,6‐tri‐O‐benzyl‐α‐D‐glucopyranoside (2) by the regioselective benzylation of methyl α‐D‐glucopyranoside (1) with benzyl bromide in the presence of mild bases K₂CO₃ and KOH (1∶1) without solvents is reported.