Trichloroisocyanuric Acid–Mediated One-Pot Synthesis of Unsymmetrical 2,5-Disubstituted 1,3,4-Oxadiazoles at Ambient Temperature

An efficient method for the one-pot synthesis of unsymmetrical 2,5-disubstituted 1,3,4-oxadiazoles has been developed using trichloroisocyanuric acid (TCCA) at ambient temperature. A wide variety of aromatic as well as heterocyclic aldehydes exhibit condensation with a variety of acylhydrazines followed by oxidative cyclization to yield corresponding unsymmetrical 2,5-disubstituted 1,3,4-oxadiazoles. The mild nature of the synthesis and short reaction time are notable advantages of the developed protocol.     

Simple and Efficient One-Pot Synthesis of Nitriles from Amides and Oximes Using in Situ–Generated Burgess-Type Reagent

The dehydration of aldoximes and amides, and oxidation of benzoin are accomplished in one-pot using in situ–generated Burgess-type reagent.

Perchloric Acid–Doped Polyaniline as an Efficient and Reusable Catalyst for the Synthesis of 2-Substituted Benzothiazoles

2-Substituted benzothiazoles have been efficiently synthesized in good yields by the condensation reaction of o-aminothiophenol with aldehydes in the presence of a catalytic amount of perchloric acid–doped polyaniline (HClO₄/PANI). The low cost, simple recovery, and efficient reusability are remarkable characteristics of this catalyst.     

LiBr: A Mild Lewis Acid Catalyst for Efficient One-Pot Synthesis of α-Amino Nitriles

α-Amino nitriles are synthesized in a one-pot, three-component coupling of aldehydes, amines, and trimethylsilyl cyanide using a catalytic amount of LiBr at ambient temperature.     

Convenient One‐Pot Synthesis of Sulfonamides from Thiols using Trichloroisocyanuric Acid

A convenient synthesis of sulfonamides from thiols is described. In situ preparation of sulfonyl chlorides from thiols is accomplished by oxidation with trichloroisocyanuric acid (TCCA), benzyltrimethylammonium chloride and water (2.5 equiv). The sulfonyl chlorides are then further allowed to react with excess amine in the same reaction vessel. Triethylamine can be optionally added as acid scavenger.     

Tungstophosphoric Acid–Catalyzed Imino-Diels–Alder Reaction: An Efficient One-Pot Synthesis of Pyrano- and Furanoquinoline Derivatives

Tungstophosphoric acid has been found to be an efficient catalyst for the synthesis of pyranos- and furanoquinolines through the Imino-Diels–Alder reaction involving one-pot coupling of benzaldehydes, anilines, and 3,4-dihydro-2 H-pyran or 2,3-dihydrofuran. The products are formed at room temperature in excellent yields in a short period of time.     

Stannic Chloride–Iodine: An Efficient Reagent for Regioselective Synthesis of Furan–Fused Heterocycles

SnCl₄‐I₂‐mediated cyclization of ortho‐cyclohexenyl phenol and ortho‐cyclohexenyl enol derivatives of coumarin, uracil, dimedone, and pyrone at room temperature for 1 h give the linear cyclized products in 78–90% yield, which, on treatment with 10% Pd‐C at 250°C for 1–2 h, afford corresponding aromatized products in 80–84% yield.     

One-Pot Synthesis of Tri-Acetalated Aldohexoses with 1,1-Dialkoxycyclohexane–p-Toluenesulfonic Acid

Abstract

2-Deoxy-d-arabino-hexose (1), 2-acetamido-2-deoxy-d-glucose (2), and 2-deoxy-2-trifluoroacetamido-d-glucose (3) were each treated with 1,1-dimethoxycyclohexane or 1,1-dibenzyloxycyclohexane in 1,4-dioxane in the presence of p-toluenesulfonic acid. The major products were the 1,1-dimethyl or 1,1-dibenzyl acetals (4-9) of 3,4:5,6-di-O-cyclohexylidene-2-deoxy-aldehydo-d-arabino-hexose, and of 2- (acylamino)-3,4:5,6-di-O-cyclohexylidene-2-deoxy-aldehydo-D-glucose. The dibenzyl acetal derivatives were converted, by hydro-genolysis, into the corresponding, acyclic aldehydes (10-12) in good yields.     

Wet Carbon‐Based Solid Acid/Potassium Bromate as an Efficient Heterogeneous Reagent for Oxidation of Alcohols under Mild Conditions

Wet carbon‐based solid acid and potassium bromate were used as new reagent for oxidation of alcohols to their corresponding aldehyde or ketone derivatives in dichloromethane with good yields.     

Triphenylphosphine–Iodine: An Efficient Reagent System for the Synthesis of Nitriles From Aldoximes

A wide range of aldoximes were smoothly converted to the corresponding nitriles with triphenylphosphine–iodine.     

Facile and Efficient One-Pot Synthesis of β-Carbolines

Initial formation of tetrahydrocarboline 3 from tryptophan methyl ester 1 and aldehyde 2 by Pictet–Spengler reaction, followed by treatment with trichlorocyanuric acid, provides a facile and efficient route for a one-pot synthesis of β-carbolines with excellent yields.     

Synthesis of New β-Acetamido Carbonyl Derivatives Using Cellulose Sulfuric Acid as an Efficient Catalyst

New β-acetamido ketone derivatives are synthesized through a one-pot, four-component reaction of benzaldehyde, dimedone, acetyl chloride, and acetonitrile in the presence of cellulose sulfuric acid as an efficient reusable catalyst. The procedure offers advantages in terms of good yields, short reaction times, mild reaction conditions, and reusability of the catalyst.     

Sodium Dihydrogen Phosphate as an Efficient Catalyst for One-Pot,Three-Component Synthesis of α-Aminophosphonates Under Solvent-Free Conditions at Room Temperature

A simple, efficient, and general method has been developed for the one-pot, three-component synthesis of α-aminophosphonates from a condensation reaction of trimethyl phosphite, aldehydes, and amines in the presence of sodium dihydrogen phosphate under solvent-free conditions. Thus, α-aminophosphonates were synthesized relatively quickly in good yields at room temperature.     

Sulfamic Acid–Mediated,Efficient, One-Pot Synthesis of Novel 5-Substituted 1,3,4-Thiadiazol-2-ylcarbamoyl Aliphatic Amide Acid Derivatives and Facile Synthesis of Cyclic Amides

Convenient and efficient one-pot syntheses of 5-substituted-1,3,4-thiadiazol-2-ylcarbamoyl aliphatic amide acid derivatives were described and developed using sulfamic acid catalyst. Thiosemicarbazide and substituted triethylorthoester and cyclic/alicyclic anhydride were efficiently condensed using sulfamic acid to furnish 5-disubstituted-1,3,4-thiadiazol-2-ylcarbamoyl aliphatic acid and amide derivatives in fair to good yield, which exclusively get cyclized to new cyclic amide derivatives.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Graphene Oxide as Recyclable Catalyst for One-Pot Synthesis of α-Aminophosphonates

We report the synthesis of α-aminophosphonates from aromatic aldehydes, aromatic and aliphatic amines, and trimethylphosphite (Kabachnik–Fields reaction) using a “carbocatalyst,” graphene oxide, at room temperature with excellent yield and recyclability. Enhanced catalytic activity of graphene oxide as compared to other catalysts studied is possibly due to the presence of carboxylic acid and hydroxyl groups.     

γ-Al2O3-Supported 12-Tungstosilicic Acid as an Efficient Heterogeneous Catalyst for the Synthesis of α-Aminonitrile

The multicomponent Strecker reaction using trimethylsilyle cyanide was performed in very short reaction times, and α-aminonitriles were prepared in excellent yields in the presence of a catalytic amount of alumina-supported tungstosilicic acid.     

One-Pot Synthesis of 2,4-Disubstituted Thiazoline from β-Azido Disulfide and Carboxylic Acid

A concise and efficient one-pot four-step synthesis of 2,4-disubstituted thiazoline via a cascade disulfide bond cleavage/thiocarbonylation/Staudinger reduction/aza-Wittig reaction is established. Treatment of various carboxylic acids with β-azido disulfides under this one-pot procedure obtained the desired thiazolines in good to excellent isolated yields.     

The Application of Trichloroacetic Acid as an Ion Pairing Reagent in LC–MS–MS Method Development for Highly Polar Aminoglycoside Compounds

A simple, sensitive and robust liquid chromatography-tandem mass spectrometry method was developed and validated for highly polar aminoglycoside compounds gentamicin, kanamycin and apramycin. The effect of trichloroacetic acid (TCA) concentration on plasma protein precipitation and sample recovery was studied and an optimized concentration of 25–30% TCA were determined that gives the best sample recovery for aminoglycosides from rat plasma. The effect of TCA concentration on the chromatographic behavior of gentamicin and tobramycin was studied on a Synergy Max RP-column using a mobile phase with a pH of 2.78. Other than protein precipitation, TCA also acted as ion pairing reagent and was only present in the samples but not in the mobile phases. The data demonstrated that by increasing the TCA concentration, the analyte retention and sensitivity were improved. The absence of TCA in mobile phase helped to reduce the ion source contamination and to achieve good reproducibility. The plasma method was linearly calibrated from 1–5,000, 20–10,000, 10–10,000 ng mL^?1 with precisions of 2.6–4.1, 3.3–5.0, 1.5–9.9%, and accuracies of 94.7–103.7, 87.9–104.9, 91.3–103.6% for gentamicin, kanamycin and apramycin, respectively. The LLOQs corresponding with a coefficient of variation less than 20% were 1, 20 and 10 ng mL^?1 for gentamicin, kanamycin and apramycin, respectively.     

One-Pot Synthesis of 2,5-Furandicarboxylic Acid from 2-Furoic Acid by a Pd-catalyzed Bromination–Hydroxycarbonylation Tandem Reaction in Acetate Buffer

The one-pot synthesis of 2,5-furandicarboxylic acid from 2-furoic acid with a yield of 57 % was achieved for the first time using a Pd-catalyzed bromination-hydroxycarbonylation tandem reaction in HOAc-NaOAc buffer. This synthetic protocol shows major improvements compared to previously reported methods, such as using biomass-based 2-furoic acid as low-cost raw material, one-pot synthesis without isolation of intermediate products, and no need for an acidification procedure. Experiments indicate that the involved Xantphos-modified Pd-catalyst and the buffer solution play significant promoting roles for each individual reaction whereas Br₂ (as the brominating reagent) had a negative effect on the second hydroxycarbonylation step, while CO was deleterious for the first bromination step. Hence, in this practical one-pot synthesis, Br₂ should be consumed in the first bromination step as fully as possible, and CO is introduced after the first bromination step has been completed.     

Application of an Organophosphorus Compound-DEPBT as Coupling Reagent in Liquid Phase Peptide Synthesis

lntroductionApplicationoforganophosphorusreagentinpeptidesynthesiswasreviewed[l.2].Thesecompoundsx`ereusedasprotectingandactivingreagents.SinceN-succinimidyldiphenylphosphate(SDPP)[3]u'aspreparedandusedasacouplingreagent.man}'efforts[4.5.6]havebeenmadetofindneu'phosphorusderivatives.DEPBT(3-(dieth}'Iox})phosphor})1Fig.1)wasfirstsynthesizedandusedasaneu'couplingreagentb}'Y.H.Yeetal.[71.Itisvery'efficientforpeptidesynthesiseitherb\solutionmethodorsolid-phasemethod.It.actsthroughactiveester…